JH 23T01 MMD - 23.1 inch Maritime Multi Display

JH 23T01 MMD - 23.1 inch Maritime Multi Display
23.1” TFT
JH 23T01 MMD - 23.1 inch Maritime Multi Display
For 220 VAC and 12-24 VDC, including touchscreen versions.
Jakob Hatteland Display AS
Created : 11 Jul, 2001
Modified : 08 May, 2002
Created by: Stein Eikesdal
Title
: IND100016-1
Subject
: JH23T01MMD-UserManual
Description: Internet release for customers.
Rev.4
Jakob Hatteland Display AS
Åmsosen, N-5578 Nedre Vats, Norway
Phone: +47 5276 3700, Fax: +47 5276 5444
www.hatteland.com
CONTENTS
Features:
This color display is an industrialized version of a high quality Fujitsu TFT based display
with MVA technology. The MMD allows you to display professional applications with
clarity and enhanced color and image quality, VGA std input, Video input and PiP
(Picture in Picture) functions. The display provides you with automatic compatibility
with multiple upgrading platforms and a vast array of graphics standards allowing
resolution upgrades without upgrading the display.
The controller and the high light intensity in combination with the high contrast
and wide backlight adjustment control, allow the product to be used in many
environments. Brightness is adjustable from 0 to 100%
JH 23T01 MMD - 23.1 inch Maritime Multi Display
CONTENTS:
OPERATION................................................................................ 3
Power switch, Display Adjustment Controls, Power Light Dimming, Hotkeys.... 3
USER CONTROLS / OSD MENU............................................... 4
User Controls, OSD Menu Icons....................................................................... 4
PC MODE - SIMPLIFIED OSD MENU........................................
PC MODE - ADVANCED OSD MENU.........................................
VIDEO MODE - SIMPLIFIED OSD MENU..................................
VIDEO MODE - ADVANCED OSD MENU...................................
5
8
13
14
PHYSICAL CONNECTIONS........................................................ 21
Touchscreen, Pal Video, S-Video, VGA Signal (RGB)...................................... 21
Power Input, Remote Control, Led Adjust......................................................... 22
PIN ASSIGNMENTS.................................................................... 23
VGA 15P D-SUB, Touchscreen 9P D-SUB........................................................ 23
TROUBLESHOOTING................................................................. 24
Common Errors................................................................................................. 24
PRESET SIGNAL TIMING TABLE...............................................
OSD MENU INDEX.....................................................................
NOTES........................................................................................
SPECIFICATIONS.......................................................................
2
25
26
28
29
Product:JH 23T01 MMD
OPERATION
Assignable Hotkeys
Auto Power LED Dimmer
Power Switch
Brightness Knob
Power Light Indicator
POWER SWITCH:
This TFT display features a Instant-ON/Delay-OFF switch, which ensures that the display
is not turned off by user accident.
Power ON: To turn the display on, press down the power switch. The power light indicator will turn green.
Note: If no VGA signal sync is present, a “NO SYNC” message will appear in the display.
Power OFF: To turn the display off, press and hold the power switch down for 3 seconds.
DISPLAY ADJUSTMENT CONTROLS:
This TFT display features a 100% dimmable image, which means it is capable of displaying a
completely black image when the brightness knob is turned fully to the left.
BRIGHTNESS - Adjust the image brightness with the knob marked with an sun icon. (Brightness knob)
Note: For navigational use, a external dimmable illumination is required (IEC 60945, 6.5.c,
e.g. Goose neck light). This is because the buttons for brightness and all the push buttons
are not self lightning (dimmable)
WARNING: Use of brightness and push buttons may inhibit visibility of information at night.
AUTOMATIC POWER LIGHT DIMMING:
This TFT display features a intellegent Auto Power LED Dimmer function which control the light intensity of
the power light indicator based on your enviroment lightning. This can also be manually adjusted using
the Led Adjust knob on the rear side of the display. (See page 11)
ASSIGNABLE HOTKEYS:
The user can assign various display functions as hotkeys (increase/decrease).
This will enable the user to quickly adjust the brightness, image size, contrast or other functions to control
the image. To assign these hotkeys, enter the “UTILITIES MENU/DIRECT ACCESS” menu and change
them to the desired hotkey function. (page 9). Default hotkeys are set to increase/decrease contrast.
3
Product:JH 23T01 MMD
USER CONTROLS / OSD MENU
MENU
UP / DOWN Buttons
Adjust Buttons -/+
USER CONTROLS:
The On Screen Manager (OSD menu) controls are located under the metal hatch on the left side
of the display. To begin understanding the menu and its usage, just follow these steps for a quick start.
1: Press the “MENU” button. The OSD menu will show all the available functions you
can adjust or control.
2: You can move to the next icon by pressing “MENU”.
3: Select options within icon menu by pressing “UP” or “DOWN” buttons.
The selected option will turn yellow.
4: Use “+” or “-” buttons to increase/decrease values.
5: Move the selection left or right by using “+” or “-” buttons.
The selected option will turn green.
6: To confirm the selection, press “+” button.
OSD MENU:
The On Screen Manager (OSD menu) contains several functions that will let the user to adjust
or setup the display to their preferred setting. The functions are shown as easy understandable icons.
Some of the menus have sub-menus, use “+” to acess these and “MENU” to go back to the previous menu.
This manual has been divided into 4 main modes: (Corner color bar in this manual indicates mode)
Mode 1 - Available functions in PC MODE Simplified OSD Menu - (JHD Logo will appear)
User can adjust the most common functions needed to operate the display.
Mode 2 - Available functions in PC MODE Advanced OSD Menu - (No JHD logo will appear)
User can access more advanced functions. (Service menu)
Mode 3 - Available functions in VIDEO MODE Simpilfied OSD Menu - (JHD logo will appear)
User can adjust the most common functions needed to operate the display.
Mode 4 - Available functions in VIDEO MODE Advanced OSD Menu - (No JHD logo will appear)
User can access more advanced functions. (Service menu)
PC MODE
= When RGB signal (i.e Windows or other operating system) is displayed full screen.
VIDEO MODE = When video signal (i.e CAMEAR / VCR / DVD) is displayed full screen.
To access the Advanced OSD Menu you must press and hold the “DOWN” button while turning power on.
When picture appears, release the “DOWN” button and press “MENU” to access the advanced functions.
Note: On older products you will not have the simplified OSD menu structure, but a fully advanced OSD menu available.
From BIOS Firmware V1.2x this have been separated into the simplified OSD menu and the advanced OSD menu for easier usage.
See page 28 for information on how to determine your BIOS Firmware version!
4
Product:JH 23T01 MMD
PC MODE - SIMPLIFIED OSD MENU
Part 1 - Available functions in PC MODE Simplified OSD Menu:
This part explains all the most common functions available which are required for most users.
Note that to be in PC MODE, a computer signal must be present in full screen, i.e Windows or other
operating system/radar system. Having a PIP view simultaneously will not interfere or change the menu
structure in any way.
FREQUENCY AND PHASE:
Selecting this function will enable the user to modify the image horizontal size and
fine tune the image quality.
FREQUENCY:
Increase/decrease the image horizontal size.
Use “+” or “-” buttons to adjust values.
PHASE:
PICTURE TYPE
Fine tune the data sampling position (adjust image quality.)
Use “+” or “-” buttons to adjust values.
: Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select “Motion”
If graphics on screen are mostly still, select “Still”
STATUS:
Selecting this function will display graphic information such as resolution and
frequency.
POSITION:
Selecting this function will enable the user to position the image within the display
area.
IMAGE UP/DOWN
: Position the image vertically using “UP” or “DOWN” buttons.
IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons.
5
Product:JH 23T01 MMD
PC MODE - SIMPLIFIED OSD MENU
PICTURE IN PICTURE:
Selecting this function will enable the user to configure PIP window size, input signal
source, horizontal and vertical position and more.
PIP SIZE
PIP SOURCE
: Select PIP window size. Choose between OFF, SIZE1, SIZE2 or SIZE3.
: Select video source to be displayed in PIP window.
Choose between AUTO, COMP, SVID or YCbCr/RGB:
AUTO
COMP
SVID
YCbCr/RGB
= automatic detection of Composite, S-Video or component.
= manual select composite video signal only.
= manual select S-Video signal only.
= manual select component video or RGB
HORIZONTAL POSITION:
Adjust the position of the PIP window horizontally.
VERTICAL POSITION:
Adjust the position of the PIP window vertically.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
ADVANCED PIP SETTINGS: (Press “+” to access the sub-menu)
BRIGHTNESS:
Increase/decrease the image brightness of the PIP window.
Use “+” or “-” buttons to adjust values.
CONTRAST:
Increase/decrease the image contrast of the PIP window.
Use “+” or “-” buttons to adjust values.
SHARPNESS:
Increase/decrease the image sharpness of the PIP window.
Use “+” or “-” buttons to adjust values.
TINT:
Increase/decrease the tint of the image of the PIP window.
Use “+” or “-” buttons to adjust values.
COLOR:
Increase/decrease the color of the image of the PIP window.
Use “+” or “-” buttons to adjust values.
LANGUAGE:
Available languages are: English, Danish and Chinese. This will affect all text
and messages in the OSD menus.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and
S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically.
6
Product:JH 23T01 MMD
PC MODE - SIMPLIFIED OSD MENU
UTILITIES:
Selecting this function will enable the user to configure the OSD menu, define
hotkeys, verify BIOS Firmware version and miscellaneous operations.
OSD SETTING: (Press “+” to access the sub-menu)
OSD H-POSITION:
Position the OSD menu horizontally.
Use “+” or “-” buttons to adjust values.
OSD V-POSITION:
OSD BACKGROUND
OSD MENU ROTATE
USER TIMEOUT
Position the OSD menu vertically.
Use “+” or “-” buttons to adjust values.
: Choose between Translucent or Opaque.
: Choose between Normal / Rotate. Will position the menu
either horizontally or vertically.
: Adjust the OSD menu timeout period in a step of 5 seconds.
DIRECT ACCESS: (Press “+” to acess the sub-menu)
Define the hotkey function (“+” or “-” buttons) to one of these OSD functions:
Brightness / Contrast / Volume / Video Source / PIP *
CALIBRATE RGB GAIN
: Color Calibration. Press “+” to automatically adjust it.
LOAD FACTORY DEFAULTS
: Recall factory default settings.
* By pressing the assigned hot key, the sequence of the selected input video source are:
Analog RGB / Component / Video / Composite Video / S-Video.
VOLUME:
This function is not implented and are not operational !
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above)
7
Product:JH 23T01 MMD
PC MODE - ADVANCED OSD MENU
Part 2 - Available functions in PC MODE Advanced OSD Menu:
This part explains all the functions available for more experienced users.
Note that to be in PC MODE, a computer signal must be present in full screen, i.e Windows or other
operating system/radar system. Having a PIP view simultaneously will not interfere or change the menu
structure in any way.
- To acess this menu, press and hold the “DOWN” button while turning power on.
- On older BIOS Firmware below V1.2 you will have the advanced menu by default.
BRIGHTNESS AND CONTRAST:
Selecting this function will enable the user to adjust brightness and contrast
for the display.
BRIGHTNESS:
Increase/decrease brightness level, total: 100 steps
Use “+” or “-” buttons to adjust values.
CONTRAST:
Increase/decrease contrast level, total: 100 steps
Use “+” or “-” buttons to adjust values.
COLOR TEMPERATURE:
Selecting this function will enable the user to modify the warmness of the picture.
Higher temperature = “cooler” picture. Lower temperature = “warmer” picture.
User can select between 9500K, 8000K, 6500K, and 5000K color temperature measured in
Kelvin degrees. Press “+” to access the sub-menu, where the RGB values can be adjusted.
Use “+” and “-” buttons to adjust these values, and “MENU” to exit. (Saving is done automatically)
FREQUENCY AND PHASE:
Selecting this function will enable the user to modify the image horizontal size and
fine tune the image quality.
FREQUENCY:
Increase/decrease the image horizontal size.
Use “+” or “-” buttons to adjust values.
PHASE:
PICTURE TYPE
Fine tune the data sampling position (adjust image quality.)
Use “+” or “-” buttons to adjust values.
: Motion / Still (Adjustment for best image quality)
If your graphics move a lot, select “Motion”
If your graphics are mostly still, select “Still”
STATUS:
Selecting this function will display graphic information such as resolution and
frequency.
8
Product:JH 23T01 MMD
PC MODE - ADVANCED OSD MENU
POSITION:
Selecting this function will enable the user to position the image within the display
area.
IMAGE UP/DOWN
: Position the image vertically using “UP” or “DOWN” buttons.
IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons.
PICTURE IN PICTURE:
Selecting this function will enable the user to configure PIP window size, input signal
source, horizontal and vertical position and more.
PIP SIZE
PIP SOURCE
: Select PIP window size. Choose between OFF, SIZE1, SIZE2 or SIZE3.
: Select video source to be displayed in PIP window.
Choose between AUTO, COMP, SVID or YCbCr/RGB:
AUTO
COMP
SVID
YCbCr/RGB
= automatic detection of Composite, S-Video or component.
= manual select composite video signal only.
= manual select S-Video signal only.
= manual select component video or RGB
HORIZONTAL POSITION:
Adjust the position of the PIP window horizontally.
VERTICAL POSITION:
Adjust the position of the PIP window vertically.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
ADVANCED PIP SETTINGS: (Press “+” to access the sub-menu)
BRIGHTNESS:
Increase/decrease the image brightness of the PIP window.
Use “+” or “-” buttons to adjust values.
CONTRAST:
Increase/decrease the image contrast of the PIP window.
Use “+” or “-” buttons to adjust values.
SHARPNESS:
Increase/decrease the image sharpness of the PIP window.
Use “+” or “-” buttons to adjust values.
TINT:
Increase/decrease the tint of the image of the PIP window.
Use “+” or “-” buttons to adjust values.
COLOR:
Increase/decrease the color of the image of the PIP window.
Use “+” or “-” buttons to adjust values.
9
Product:JH 23T01 MMD
PC MODE - ADVANCED OSD MENU
GRAPHIC SCALING MODES:
Selecting this function will enable the user to configure the graphic scaling of the
PC displayed image.
Available modes are ONE TO ONE, FILL SCREEN, FILL TO ASPECT RATIO and
NOLINEAR SCALING MODES.
ONE TO ONE: (Press “+” to access the sub-menu)
HORIZONTAL PAN:
Increase/decrease the horizontal pan.
Use “+” or “-” buttons to adjust values.
VERTICAL PAN:
FILL SCREEN
FILL TO ASPECT RATIO
Increase/decrease the vertical pan.
Use “+” or “-” buttons to adjust values.
: Enable full screen expansion for lower resolution image.
: Enable full screen expansion for lower resolution image
according to aspect ratio.
NONLINEAR SCALING MODES: (Press “+” to access the sub-menu)
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
Use “+” or “-” buttons to adjust values.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
Use “+” or “-” buttons to adjust values.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
Use “+” or “-” buttons to adjust values.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
Use “+” or “-” buttons to adjust values.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
Use “+” or “-” buttons to adjust values.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
Use “+” or “-” buttons to adjust values.
LANGUAGE:
Available languages are: English, Danish and Chinese. This will affect all text
and messages in the OSD menus.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and
S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically.
10
Product:JH 23T01 MMD
PC MODE - ADVANCED OSD MENU
UTILITIES:
Selecting this function will enable the user to configure the OSD menu, define
hotkeys, verify BIOS Firmware version and miscellaneous operations.
USER SETTING: (Press “+” to access the sub-menu)
DPMS
DISPLAY INPUT
AUTO SOURCE SELECT
GAMMA
: Disable / Enable the DPMS function.
: Disable / Enable input source name upon power up.
: Off = Disable auto source select function.
Low = Auto source select enabled ONLY in power up.
High = Auto source select ALWAYS enabled.
: 1.0 / 1.6 / 2.2 - Adjusts gamma on TFT display.
OSD SETTING: (Press “+” to access the sub-menu)
OSD H-POSITION:
Position the OSD menu horizontally.
Use “+” or “-” buttons to adjust values.
OSD V-POSITION:
Position the OSD menu vertically.
Use “+” or “-” buttons to adjust values.
OSD BACKGROUND
OSD MENU ROTATE
: Choose between Translucent or Opaque.
: Choose between Normal / Rotate. Will position the menu
either horizontally or vertically.
: Adjust the OSD menu timeout period in a step of 5 seconds.
USER TIMEOUT
FREEZE
: Press “+” to freeze the display area, including PIP view.
ZOOM: (Press “+” to acess the sub-menu)
ZOOM LEVEL:
Zooms in the display area from center.
HORIZONTAL PAN:
Pan the display area horizontally.
VERTICAL PAN:
Pan the display area vertically.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
DIRECT ACCESS: (Press “+” to access the sub-menu)
Define the hotkey function (“+” or “-” buttons) to one of these OSD functions:
Brightness / Contrast / Volume / Freeze / Zoom / Video Source / PIP *
DISPLAY ORIENTATION: (Press “+” to access the sub-menu)
Will flip/inverse the display area including PIP view. Press “+” to choose between:
Normal / Horizontal Inverse / Vertical Inverse / Inverse
CALIBRATE RGB GAIN
: Color Calibration. Press “+” to automatically adjust it.
LOAD FACTORY DEFAULTS
: Recall factory default settings.
* By pressing the assigned hot key, the sequence of the selected input video source are:
Analog RGB / Component / Video / Composite Video / S-Video.
11
Product:JH 23T01 MMD
PC MODE - ADVANCED OSD MENU
VOLUME:
This function is not implented and are not operational !
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above)
12
Product:JH 23T01 MMD
VIDEO MODE - SIMPLIFIED OSD MENU
Part 3 - Available functions in VIDEO MODE Simplified OSD Menu:
This part explains all the most common functions available which are required for most users.
Note that to be in VIDEO MODE, a video signal must be present in full screen, i.e from a camera, VCR or
DVD player.
VIDEO ADJUSTMENT:
Selecting this function will enable the user to modify the color saturation of the
picture, tint and sharpness.
COLOR:
TINT:
SHARPNESS:
Increase/decrease video color level.
Use “+” or “-” buttons to adjust values.
Increase/decrease tint level.
Use “+” or “-” buttons to adjust values.
Increase/decrease video image sharpness level.
Use “+” or “-” buttons to adjust values.
PICTURE TYPE
: Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select “Motion”
If graphics on screen are mostly still, select “Still”
VIDEO TYPE
: Change to best match the source signal. (DVD / VCR)
VIDEO SYSTEM:
Selecting this function will enable the user to select video system and input signals.
AUTO
NTSC / NTSC 4.43
PAL / PAL M
SECAM
: Automatic detection of NTSC or PAL system. (Not applicable in SECAM)
: Manual select NTSC system.
: Manual select PAL system.
: Manual select SECAM system.
POSITION:
Selecting this function will enable the user to position the image within the display
area.
IMAGE UP/DOWN
: Position the image vertically using “UP” or “DOWN” buttons.
IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons.
ROTATION:
Selecting this function will enable the user to rotate the image to either
landscape or portrait format.
13
Product:JH 23T01 MMD
VIDEO MODE - SIMPLIFIED OSD MENU
GRAPHIC SCALING MODES:
Selecting this function will enable the user to switch between video scaling modes.
The available modes are: NORMAL, LETTERBOX, LETTERBOX WITH SUBTITLES,
and NOLINEAR SCALING MODES.
Use “UP” and “DOWN” buttons to select scaler mode.
NORMAL: (Press “+” to access the sub-menu)
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
Use “+” or “-” buttons to adjust values.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
Use “+” or “-” buttons to adjust values.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
Use “+” or “-” buttons to adjust values.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
Use “+” or “-” buttons to adjust values.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
Use “+” or “-” buttons to adjust values.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
Use “+” or “-” buttons to adjust values.
LETTERBOX
: Stretches a letterboxed picture to full screen.
LETTERBOX WITH SUBTITLES : Stretches and pans a letterboxed picture to full screen, which enables
viewing of subtitles in botoom.
NONLINEAR SCALING MODES: (Press “+” to access the sub-menu)
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
Use “+” or “-” buttons to adjust values.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
Use “+” or “-” buttons to adjust values.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
Use “+” or “-” buttons to adjust values.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
Use “+” or “-” buttons to adjust values.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
Use “+” or “-” buttons to adjust values.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
Use “+” or “-” buttons to adjust values.
LANGUAGE:
Available languages are: English, Danish and Chinese. This will affect all text
and messages in the OSD menus.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and
S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically.
14
Product:JH 23T01 MMD
VIDEO MODE - SIMPLIFIED OSD MENU
UTILITIES:
Selecting this function will enable the user to configure the OSD menu, define
hotkeys, verify BIOS Firmware version and miscellaneous operations.
OSD SETTING: (Press “+” to access the sub-menu)
OSD H-POSITION:
Position the OSD menu horizontally.
Use “+” or “-” buttons to adjust values.
OSD V-POSITION:
OSD BACKGROUND
OSD MENU ROTATE
USER TIMEOUT
Position the OSD menu vertically.
Use “+” or “-” buttons to adjust values.
: Choose between Translucent or Opaque.
: Choose between Normal / Rotate. Will position the menu
either horizontally or vertically.
: Adjust the OSD menu timeout period in a step of 5 seconds.
DIRECT ACCESS: (Press “+” to acess the sub-menu)
Define the hotkey function (“+” or “-” buttons) to one of these OSD functions:
Brightness / Contrast / Volume / Video Source / PIP *
LOAD FACTORY DEFAULTS
: Recall factory default settings.
* By pressing the assigned hot key, the sequence of the selected input video source are:
Analog RGB / Component / Video / Composite Video / S-Video.
VOLUME:
This function is not implented and are not operational !
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above)
15
Product:JH 23T01 MMD
VIDEO MODE - ADVANCED OSD MENU
Part 4 - Available functions in VIDEO MODE Advanced OSD Menu:
This part explains all the functions available for more experienced users.
This part explains all the most common functions available which are required for most users.
Note that to be in VIDEO MODE, a video signal must be present in full screen, i.e from a camera, VCR or
DVD player.
- To acess this menu, press and hold the “DOWN” button while turning power on.
- On older BIOS Firmware below V1.2 you will have the advanced menu by default.
BRIGHTNESS AND CONTRAST:
Selecting this function will enable the user to adjust brightness and contrast
for the display.
BRIGHTNESS:
CONTRAST:
Increase/decrease brightness level, total: 100 steps
Use “+” or “-” buttons to adjust values.
Increase/decrease contrast level, total: 100 steps
Use “+” or “-” buttons to adjust values.
COLOR TEMPERATURE:
Selecting this function will enable the user to modify the warmness of the picture.
Higher temperature = “cooler” picture. Lower temperature = “warmer” picture.
User can select between 9500K, 8000K, 6500K, and 5000K color temperature measured in
Kelvin degrees. Press “+” to access the sub-menu, where the RGB values can be adjusted.
Use “+” and “-” buttons to adjust these values, and “MENU” to exit. (Saving is done automatically)
VIDEO ADJUSTMENT:
Selecting this function will enable the user to modify the color saturation of the
picture, tint and sharpness.
COLOR:
TINT:
SHARPNESS:
Increase/decrease video color level.
Use “+” or “-” buttons to adjust values.
Increase/decrease tint level.
Use “+” or “-” buttons to adjust values.
Increase/decrease video image sharpness level.
Use “+” or “-” buttons to adjust values.
PICTURE TYPE
: Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select “Motion”
If graphics on screen are mostly still, select “Still”
VIDEO TYPE
: Change to best match the source signal. (DVD / VCR)
16
Product:JH 23T01 MMD
VIDEO MODE - ADVANCED OSD MENU
VIDEO SYSTEM:
Selecting this function will enable the user to select video system and input signals.
AUTO
NTSC / NTSC 4.43
PAL / PAL M
SECAM
: Automatic detection of NTSC or PAL system. (Not applicable in SECAM)
: Manual select NTSC system.
: Manual select PAL system.
: Manual select SECAM system.
POSITION:
Selecting this function will enable the user to position the image within the display
area.
IMAGE UP/DOWN
: Position the image vertically using “UP” or “DOWN” buttons.
IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons.
ROTATION:
Selecting this function will enable the user to rotate the image to either
landscape or portrait format.
17
Product:JH 23T01 MMD
VIDEO MODE - ADVANCED OSD MENU
GRAPHIC SCALING MODES:
Selecting this function will enable the user to switch between video scaling modes.
The available modes are: NORMAL, LETTERBOX, LETTERBOX WITH SUBTITLES,
and NOLINEAR SCALING MODES.
Use “UP” and “DOWN” buttons to select scaler mode.
NORMAL: (Press “+” to access the sub-menu)
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
Use “+” or “-” buttons to adjust values.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
Use “+” or “-” buttons to adjust values.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
Use “+” or “-” buttons to adjust values.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
Use “+” or “-” buttons to adjust values.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
Use “+” or “-” buttons to adjust values.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
Use “+” or “-” buttons to adjust values.
LETTERBOX
: Stretches a letterboxed picture to full screen.
LETTERBOX WITH SUBTITLES : Stretches and pans a letterboxed picture to full screen, which enables
viewing of subtitles in botoom.
NONLINEAR SCALING MODES: (Press “+” to access the sub-menu)
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
Use “+” or “-” buttons to adjust values.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
Use “+” or “-” buttons to adjust values.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
Use “+” or “-” buttons to adjust values.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
Use “+” or “-” buttons to adjust values.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
Use “+” or “-” buttons to adjust values.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
Use “+” or “-” buttons to adjust values.
LANGUAGE:
Available languages are: English, Danish and Chinese. This will affect all text
and messages in the OSD menus.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and
S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically.
18
Product:JH 23T01 MMD
VIDEO MODE - ADVANCED OSD MENU
UTILITIES:
Selecting this function will enable the user to configure the OSD menu, define
hotkeys, verify BIOS Firmware version and miscellaneous operations.
USER SETTING: (Press “+” to access the sub-menu)
DPMS
DISPLAY INPUT
AUTO SOURCE SELECT
GAMMA
: Disable / Enable the DPMS function.
: Disable / Enable input source name upon power up.
: Off = Disable auto source select function.
Low = Auto source select enabled ONLY in power up.
High = Auto source select ALWAYS enabled.
: 1.0 / 1.6 / 2.2 - Adjusts gamma on TFT display.
OSD SETTING: (Press “+” to access the sub-menu)
OSD H-POSITION:
Position the OSD menu horizontally.
Use “+” or “-” buttons to adjust values.
OSD V-POSITION:
Position the OSD menu vertically.
Use “+” or “-” buttons to adjust values.
OSD BACKGROUND
OSD MENU ROTATE
: Choose between Translucent or Opaque.
: Choose between Normal / Rotate. Will position the menu
either horizontally or vertically.
: Adjust the OSD menu timeout period in a step of 5 seconds.
USER TIMEOUT
FREEZE
: Press “+” to freeze the display area, including PIP view.
ZOOM: (Press “+” to acess the sub-menu)
ZOOM LEVEL:
Zooms in the display area from center.
HORIZONTAL PAN:
Pan the display area horizontally.
VERTICAL PAN:
Pan the display area vertically.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
Use “+” or “-” buttons to adjust values.
DIRECT ACCESS: (Press “+” to access the sub-menu)
Define the hotkey function (“+” or “-” buttons) to one of these OSD functions:
Brightness / Contrast / Volume / Freeze / Zoom / Video Source / PIP *
DISPLAY ORIENTATION: (Press “+” to access the sub-menu)
Will flip/inverse the display area including PIP view. Press “+” to choose between:
Normal / Horizontal Inverse / Vertical Inverse / Inverse
LOAD FACTORY DEFAULTS
: Recall factory default settings.
* By pressing the assigned hot key, the sequence of the selected input video source are:
Analog RGB / Component / Video / Composite Video / S-Video.
19
Product:JH 23T01 MMD
VIDEO MODE - ADVANCED OSD MENU
.
VOLUME:
This function is not implented and are not operational !
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above)
20
Product:JH 23T01 MMD
PHYSICAL CONNECTIONS
Rear side of display
Touch(opt)
Pal Video
S-Video
Signal Input (RGB)
Power Input
Led Adjust
Remote Control(opt)
TOUCHSCREEN: (optional)
Connect the RS-232 cable to the D-SUB 9P Connector (female) on the rear side of the TFT display.
Connect the other end to your COM port of your computer. Install the nesscessary software needed to
operate it.
- Note that the connector is only installed upon customer request.
PAL VIDEO:
Connect your composite video signal cable into the RCA jack plug. To activate the Picture In Picture
function, the TFT display must be configured via the OSD menus.
- Note that Composite Video must be selected as the incoming video source.
S-VIDEO:
Connect your S-Video (SVHS) video signal cable into the mini 4-way din plug. It can only be inserted
one way and make sure you don’t bend any of the pins inside your cable. To activate the Picture In Picture
function, the TFT display must be configured via the OSD menus.
- Note that S-Video must be selected as the incoming video source.
SIGNAL INPUT (RGB):
Connect the VGA cable to the D-SUB 15P Connector (female) on the rear side of the TFT display.
If possible, screw the VGA cable to the D-SUB connector and make sure you don’t bend any of the pins
inside the VGA cable connector. To reduce tension of the VGA cable, secure it to the base mounted cable
tie clamp. Connect the other end of the cable to the VGA output of your computer, and fasten it there also.
continues....
21
Product:JH 23T01 MMD
PHYSICAL CONNECTIONS
POWER INPUT:
Make sure the TFT display is turned off before connecting. Insert the powercable into the 220 VDC
power input. You may secure the cable further by mounting it to the base mounted cable tie clamp.
REMOTE CONTROL: (optional)
The two serial remote control connectors are reserved for future applications.
LED ADJUST:
Manually adjust the intensity of the power light indicator which is loacted in the front of the display.
The power light indicator is controlled by the Auto Power LED Dimming function which automatically
adjusts the intensity of the power light based on your environment lightning. You could also turn it off, if that
is necessary.
22
Product:JH 23T01 MMD
PIN ASSIGNMENTS
VGA D-SUB 15P CONNECTOR FEMALE:
5
10
4
9
3
8
2
7
15 14 13
1
6
12
11
Pin Number:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description:
Red, analog
Green, analog
Blue, analog
Reserved for monitor ID bit 2 (grounded)
Digital ground
Analog ground red
Analog ground green
Analog ground blue
+5V power supply for DDC (optional)
Digital ground
Reserved for monitor ID bit 0 (grounded)
DDC serial data
Horizontal sync or composite sync, input
Vertical sync, input
DDC serial clock
TOUCHSCREEN D-SUB 9P CONNECTOR FEMALE: (optional)
5
4
9
3
8
2
7
1
6
Pin Number:
1
2
3
4
5
6
7
8
9
Description:
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
23
Product:JH 23T01 MMD
TROUBLESHOOTING
COMMON ERRORS:
If for some reason there should be something wrong with the picture quality or no picture present, check
the symptoms carefully and try to cure it with the hints below:
NO PICTURE / LED BEHAVIOUR:
Power Switch and computer power switch should be in the ON position. The signal cable should be
completely connected to the video card/computer. Check the connector for bent or pushed-in pins. If
the LED in front is red, no external VGA signal is present. If there is no light at all in the LED, no power
is present to the unit. Check your external power source. A lack of image is most likely to be caused by
incorrect connection, lack of power, failure to provide a signal or incorrect graphic card settings.
SCROLLING / UNSTABLE IMAGE:
Signal cable may not be completely connected to computer or TFT display.
Check the pin assignmenst and signal timings of the display and your video card with respect to
recommended timing and pin assignments. Make sure that the video card is compatible and that it is
properly seated / installed on the computer.
DISPLAY AREA IS NOT CENTERED / SIZED CORRECTLY:
Make sure that a supported video mode has been selected on the display, or on the video card / system.
If it is impossible to position the image correctly, ie the image adjustment controls will not move the image
far enough, then test it again using another graphics card for the PC system. This situation can occur with
a custom graphics card that is not close to standard timings or if something is in the graphics line that may
be affecting the signal, such as a signal splitter (please note that normally a signal splitter will not have any
adverse effect).
IMAGE APPERANCE:
A faulty TFT panel can have black lines, pixel errors, failed sections, flickering or flashing image.
Incorrect graphics card refresh rate, resolution or interlaced mode will probably cause the image to be
the wrong size, it may scroll, flicker badly or possibly even no image is present. Sparkling on the display
may be a faulty TFT panel signal cable.
CONTINUED FAILURE:
If unit after unit keeps failing, consider and investigate whether you are short circuiting the equipment or
doing something else seriously wrong.
24
Product:JH 23T01 MMD
PRESET SIGNAL TIMING
PRESET SIGNAL TIMING TABLE:
This TFT display is capable of detecting the following resolutions along with its preset signal
timing setting. These settings have been pre-programmed by the RGB controller factory.
The following industrial standard settings are supported for this display:
Mode
Resolution
E1_70
E1_85
E2_70
E2_85
T_70
T_85
V_62
V_60
V_67
V_72
V_75
V_85
SV_56
SV_60
SV_72
SV_75
SV_85
X_60
X_70
X_72
X_75
X_87i
X_85
SX_60
SX_72
SX_75
SX_85
UX_60
UX_70
UX_75
UX_85
NTSC
PAL
NTSC
PAL
640 x 350
640 x 350
640 x 400
640 x 400
720 x 400
720 x 400
736 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768 (43 Hz)
1024 x 768
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
S-Video
S-Video
Composite Video
Composite Video
Clk (MHz)
25.175
31.500
25.175
31.500
28.322
35.500
28.200
25.175
31.500
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
65.500
75.000
75.000
78.750
44.900
94.500
108.000
135.000
135.000
149.844
112.288
120.925
129.562
146.625
14.318
17.75
14.318
17.75
Horiz.Freq(KHz)
31.469
37.861
31.469
37.861
31.469
37.927
31.403
31.469
37.500
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
48.363
54.476
57.515
60.023
35.522
68.677
63.981
78.125
79.976
91.146
75.000
87.500
93.75
106.259
15.734
15.625
15.734
15.625
25
Vert.Freq(Hz)
70
85
70
85
70
85
62
60
67
72
75
85
56
60
72
75
85
60
70
72
75
87
85
60
72
75
85
60
70
75
85
60
50
60
50
Note
Interlaced
Product:JH 23T01 MMD
OSD MENU INDEX
On Screen Display (OSD) MENU INDEX:
0-9
5000K
6500K
8000K
9500K
8, 16
8, 16
8, 16
8, 16
A
ADVANCED PIP SETTINGS 6, 9
AUTO 6, 9, 13, 17
AUTO SOURCE SELECT 11, 19
B
BRIGHTNESS 6, 8, 9, 1
C
CALIBRATE RGB GAIN 7, 11
COLOR 6, 9, 13, 16
COLOR TEMPERATURE 8, 16
COMP 6, 9
CONTRAST 6, 8, 9, 16
D
DIRECT ACCESS 7, 11, 15, 19
DISPLAY INPUT 11, 19
DISPLAY ORIENTATION 11, 19
DPMS 11, 19
E
EXIT MENU 7, 12, 15, 20
F
FILL SCREEN 10
FILL TO ASPECT RATIO 10
FREEZE 11, 19
FREQUENCY 5, 8
G
GAMMA 11, 19
GRAPHIC SCALING MODES 10, 14, 18
H
HORIZONTAL CLIPPING 10, 14, 18
HORIZONTAL INVERSE 11, 19
HORIZONTAL OFFSET 10, 14, 18
HORIZONTAL PAN 10, 11, 19
HORIZONTAL POSITION 6, 9
HORIZONTAL STRETCH 10, 14, 18
I
IMAGE LEFT/RIGHT 5, 9, 13, 17
IMAGE UP/DOWN 5, 9, 13, 17
INVERSE 11, 19
L
LANGUAGE 6, 10, 14, 18
LETTERBOX 14, 18
LETTERBOX WITH SUBTITLES 14, 18
LOAD FACTORY DEFAULTS 7, 11, 15, 19
26
Product:JH 23T01 MMD
OSD MENU INDEX
N
NONLINEAR SCALING MODES 10, 14, 18
NORMAL 14, 18
NORMAL 11, 19
NTSC / NTSC 4.43 13, 17
O
ONE TO ONE 10
OSD BACKGROUND 7, 11, 15, 19
OSD H-POSITION 7, 11, 15, 19
OSD MENU ROTATE 7, 11, 15, 19
OSD SETTING 7, 11, 15, 19
OSD V-POSITION 7, 11, 15, 19
P
PAL / PAL M 13, 17
PHASE 5, 8
PICTURE TYPE 5, 8, 13, 16
PICTURE IN PICTURE 6, 9
PIP SIZE 6, 9
PIP SOURCE 6, 9
POSITION 5, 9, 13, 17
R
ROTATION 13, 17
S
SECAM 13, 17
SHARPNESS 6, 9, 13, 16
STATUS 5, 8
SVID 6, 9
T
TINT 6, 9, 13, 16
U
USER SETTING 11, 19
USER TIMEOUT 7, 11, 15, 19
UTILITIES 7, 11, 15, 19
V
VERTICAL CLIPPING 10, 14, 18
VERTICAL Inverse 11, 19
VERTICAL OFFSET 10, 14, 18
VERTICAL PAN 10, 11, 19
VERTICAL POSITION 6, 9
VERTICAL STRETCH 10, 14, 18
VIDEO ADJUSTMENT 13, 16
VIDEO SOURCE 6, 10, 14, 18
VIDEO SYSTEM 13, 17
VIDEO TYPE 13, 16
VOLUME 7, 12, 15, 20
Y
YCbCr/RGB 6, 9
Z
ZOOM 11, 19
ZOOM LEVEL 11, 19
27
Product:JH 23T01 MMD
NOTES
- The monitor is type approved according EN 60945 (1997), 4.4, equipment category b) protected from
the weather.
- For navigational use a external dimmable illumination is required;
(IEC 60945, 6.5.c, e.g. Goose neck light).
This is because the knob for brightness and the push buttons are not self lightning (dimmable).
- Use of brightness and push buttons may inhibit visibility of information at night.
BIOS Firmware:
On older products you will ONLY have the advanced version of the OSD menu and you should
use the advanced sections of this manual to operate your display.
To verify your BIOS Firmware version, the version number is displayed in the UTILITIES menu in
the right top corner. If no version number shows, you may have a BIOS Firmware below V1.00
This manual matches the BIOS Firmware V1.00 / V1.10 / V1.2 / V1.2F1 and V1.2F2.
As the available functions are nearly indentical between older products and V1.2F2, there should
be no critical need to update the BIOS Firmware.
Touchscreen:
For touchscreen usage, please visit our website for 3rd party software, drivers and documentation.
28
Product:JH 23T01 MMD
SPECIFICATIONS
TFT Display:
23.1” viewable image size
Thin Film Transistor (TFT)
MVA technology
Characteristics:
Dot number
Dot pitch (RGB)
Response Time
Contrast Ratio
Light Intensity
Viewable Angle
Power Supply:
110/220 VAC
24 VDC
: 1600 x 1200
: (0,294) (H) x 0,294 (V) mm
: 25 ms (typ)
: 400:1 (typ)
: Max 250 cd/m2 (typical)
:+/- 80 deg. (typ.) (Up/Down/Left/Right)
(@ CR > 10)
Display Colors Analog Input:
16.777.216 colors (8-bit color)
(JH 23T01 MMD A1)
(JH 23T01 MMD A2)
Power Consumption:
Operating
: Max 100 W (max)
Environmental Considerations:
Operating:
Temperature -15 deg. C to +55
deg. C
Humidity 30% to 90% (non condensing)
Storage:
Temperature -20 deg. C to +60 deg. C
Humidity 10% to 90% (non condensing)
Dimensions:
584 (W) x 534 (H) x 71.77 (D) mm
Weight
: 17 kg (w/bracket)
RGB Input Signal:
Analog RGB 0,7Vp-p
Input impedance 75 Ohm
Sync Signal:
Digital separate sync., Composite sync., sync. on green
Auto detects VGA -> SXGA, interlaced and non interlaced
Synchronisation Range:
Horizontal
: 31,5 kHz to 91,1 kHz
Vertical
: 60 Hz to 85 Hz
Resolutions:
640 x 350 / 640 x 480 / 720 x 400 / 800 x 600
1024 x 768 / 1280 x 1024 / 1600 x 1200 *
Input Signal Terminal:
RGB (PC) signal:
15pin mini Dsub
Video signal:
Composite video
S-Video
: Phono plug
: S-video plug
Power:
JH23T01 MMD A1
JH23T01 MMD A2
: Std IEC inlet
: Screw terminal
(AC input)
(DC input)
Touch Screen: (optional)
1 x D-SUB 9P Connector (female)
Active Display Area (factory setting):
470.4 (H) x 352.8 (V) mm
User Controls:
Power On/Off button, Brightness Control, 2x hotkeys,
Mode Status LED, On Screen Display Control, Auto LED
intensity adjust.
* Recommended for optimum picture quality
Specification and design are subject to change without notice.
For additional information, datasheets and
support for this product, please visit our website:
www.hatteland.com
29
Jakob Hatteland Display AS
Åmsosen, N-5578 Nedre Vats, Norway
Phone
Fax
E-mail
: +47 5276 3700
: +47 5276 5444
: jhd-no@hatteland.com
Product:JH 23T01 MMD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising