HDMI Over Single Coax Single Coax Single Coax

HDMI Over Single Coax Single Coax Single Coax
HDMI Over Single Coax Transmitter
Part # 9090-12024
User Manual
CONTENTS
1
2
3
4
5
6
7
8
Introduction
Operation Notes
Features
Sender Unit Panel Layout
Sender Unit Panel Descriptions
Connecting and Operating the HDMI Over Coax Extender
Mounting Plate Installation
Specifications
INTRODUCTION
The TX HDMI Over Single Coax Extender-Transmitter
The HDMI Over Single Coax Extender sends HDMI signals Over just one
75Ohm Coaxial cable -- up to 400 feet away. The HDMI Over Single Coax
Extender supports HDMI 1.2 and the newer HDMI 1.3 with features such
as Deep Color and 1080p . DVI-D Computer video can also be transmitted
with a DVI-to-HDMI cable
By using standard and widely available 75Ohm RG-6U cables, the HDMI
Over Single Coax Extender makes HDMI signal extensions easier than
with heavy and expensive copper cables and more robust than with
optical fiber.
How it connects
The HDMI Over Single Coax Extender system consists of a Transmitter
and a Receiver. The HDMI source (set-top box, DVD player, or gaming
console) connects to the sender box with the supplied 6-foot HDMI cable.
The receiver box connects to the HDTV display in the same way -- up to
400 feet away. One 75Ohm RG-6U Coax cables link the sender and
receiver. Power is applied to the sender and receiver with the included
12V DC power supplies. HDMI picture emerges on the HDTV display.
Note:The HDMI Over Single Coax Extender is HDCP compliant.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE EXTENDER FOR HDMI OVER SINGLE COAX
The distance that a signal will be carry over the Extender for is varied
depending on the source’s resolution and features.
- 20m (66 feet) -- HDMI 1.3 w/Deep Color/1080p, Dolby TrueHD or
DTSHD losless multi-channel audio
- 30m (99 feet) -- HDMI 1.2 at 1080p with Multichannel Audio
- 45m (148 feet) -- HDMI 1.2 at 720p or 1080i with Multichannel Audio
All stated distances are for use with CAT-6a (Augmented CAT-6)
cabling that is terminated according to the ANSI/TIA/EIA-568B
specification. ANSI/TIA/EIA-568A termination can be used but may
cause marginal distance loss. CAT-5e and CAT-6 cable can be used but
distance ratings will be shortened. Ratings for CAT-5e cabling is as
follows:
- 50 feet (15 meters) -- HDMI 1.3 w/Deep Color, 1080p HD and Dolby
TrueHD Lossless Multichannel 7.1 Audio
- 125 feet (37 meters) -- HDMI 1.2 at 1080p with Multichannel 5.1 Audio
- 200 feet (60 meters) -- HDMI 1.2 at 720p or 1080i with Multichannel 5.1
Audio
Both CAT-6a cables (VIDEO and DDC) must be used for extension.
HDMI 1.3 compliant. Please see page 3 for a list of supported HDMI 1.3
features.
HDCP compliant.
FEATURES
Features
Flexible extension of high-bandwidth HDMI 1.3 thanks to the
performance and reliability of 75Ohm RG-6U Coax cable.
Audio and video are transmitted digitally over the 75Ohm RG-6U Coax
cable for zero signal loss.
Single Link Range: 1080p/60, 12 bit color depth, 1920x1200.
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards
Supports digital video formats in Deep Color Mode at up to 12bits/color
Supports PCM L/R audio
Supports IR Pass thru function and control HDMI source devices
(set-top box, DVD player and Blue ray DVD Player ) in Receiver by its
IR remote controller.
Supports Cascade function in Transmitter and Receiver and easy to
build a network system by installer.
Features
• Lip-Sync Pass Through
• 340 MHz (up to 12 bit YUV 444 Supported @ 1080p)
• Deep Color Supported (XV Color Supported)
• Cascade function in Transmitter and Receiver.
• CEC Pass Through & xvYCC Supported
Package Includes
(1) TX HDMI Over Single Coax Transmitter
(1) 6 Foot HDMI Cable (M-M)
(1) 6 Foot IR Emitter Cable
(1) 12V DC Power Supply
(1) Set of Wall Mounting Plates
(1) User’s Manual
TRANSMITTER UNIT PANEL LAYOUT
Front Panel
HDMI Input 1 HDMI Input 2 IR Emitter Source LED
Back Panel
Power LED
DC 12V1A
Power Input
IR Receiver
Cascade Port
Output Port
TRANSMITTER UNIT PANEL DESCRIPTIONS
1
HDMI Input Port
Connect the two HDMI sources to source 1 and 2 input port.
2
Power Indicator LED
This LED indicator will become active once the included 12V DC
power adapter has bee properly connected between the transmitter unit
and an open wall power socket.
3
12V1A DC Power Input Port
Connect the included 12V1A DC power supply to this input port.
4
Coax BNC Port
Connect a 75Ohm RG-6U Coax cable between this output port and the
input port on the receiving unit.
Connect extra 75Ohm RG-6U Coax cable between cascade port and the
input port on the extra receiving unit.
5
IR Port (IR Emitter)
Connect a IR Emitter Cable this IR port and paste IR emitter module on
the IR receiver zone of HDMI source (set-top box, DVD player and
Blue ray DVD Player ).
CONNECTING AND OPERATING
How to Connect the TX HDMI Over SINGLE COAX
TRANSMITTER WITH CASCADE FUNCTION
1. Connect the HDMI source device to the HDMI Over Single Coax
Extender transmitter unit using the supplied HDMI cable.
2. Connect one 75Ohm RG-6U Coax cables between the output port of
transmitter and input port of number A receiver.
3. Connect one 75Ohm RG-6U Coax cables between the cascade port of
transmitter and input port of number B receiver.
4. Connect the HDTV display HDMI input port to the HDMI Over Coax
receiver using a HDMI cable.
5. Connect the included 12V DC power supplies to both the transmitter
and receiver units.
6. Power on the output device first and the source second.
SPECIFICATIONS
Video Amplifier Bandwidth .............................................................. 340 MHz
Video Output ........ 1080p/60, 12 bit color depth, 2k and 1920x1200 max. res
Input DDC Signal .......... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p
HDMI Connector .......................................................... Type A, 19 Pin Female
Link Connector .......................................................................... BNC Shielded
Power Supply ......................... 12V DC / Power Consumption: 12 Watts max.
Operating Temperature ..................................................................... 0°C - 40°C
Shipping Weight ........................................................................................ 3 lbs.
Dimensions ................................................................. 3.4” W x 1.3” H x 3.3” D
HDMI Over Single Coax Receiver
Part # 9090-12024
User Manual
CONTENTS
1
2
3
4
5
6
7
8
Introduction
Operation Notes
Features
Receiver Unit Panel Layout
Receiver Unit Panel Descriptions
Connecting and Operating the HDMI Over Coax Extender
Mounting Plate Installation
Specifications
INTRODUCTION
The HDMI Over Single Coax Extender-Receiver
TheHDMI Over Single Coax Extender sends HDMI signals Over just one
75Ohm Coaxial cable -- up to 400 feet away. The HDMI Over Single Coax
Extender supports HDMI 1.2 and the newer HDMI 1.3 with features such
as Deep Color and 1080p . DVI-D Computer video can also be transmitted
with a DVI-to-HDMI cable
By using standard and widely available 75Ohm RG-6U cables, the HDMI
Over Single Coax Extender makes HDMI signal extensions easier than
with heavy and expensive copper cables and more robust than with
optical fiber.
How it connects
The HDMI Over Single Coax Extender system consists of a Transmitter
and a Receiver. The HDMI source (set-top box, DVD player, or gaming
console) connects to the sender box with the supplied 6-foot HDMI cable.
The receiver box connects to the HDTV display in the same way -- up to
400 feet away. One 75Ohm RG-6U Coax cables link the sender and
receiver. Power is applied to the sender and receiver with the included
12V DC power supplies. HDMI picture emerges on the HDTV display.
Note:The HDMI Over Single Coax Extender is HDCP compliant.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE EXTENDER FOR HDMI OVER SINGLE COAX
The distance that a signal will be carry over the Extender for HOC-120
is varied depending on the source’s resolution and features.
- 20m (66 feet) -- HDMI 1.3 w/Deep Color/1080p, Dolby TrueHD or
DTSHD lossless multi-channel audio
- 30m (99 feet) -- HDMI 1.2 at 1080p with Multichannel Audio
- 45m (148 feet) -- HDMI 1.2 at 720p or 1080i with Multichannel Audio
All stated distances are for use with CAT-6a (Augmented CAT-6)
cabling that is terminated according to the ANSI/TIA/EIA-568B
specification. ANSI/TIA/EIA-568A termination can be used but may
cause marginal distance loss. CAT-5e and CAT-6 cable can be used but
distance ratings will be shortened. Ratings for CAT-5e cabling is as
follows:
- 50 feet (15 meters) -- HDMI 1.3 w/Deep Color, 1080p HD and Dolby
TrueHD Lossless Multichannel 7.1 Audio
- 125 feet (37 meters) -- HDMI 1.2 at 1080p with Multichannel 5.1 Audio
- 200 feet (60 meters) -- HDMI 1.2 at 720p or 1080i with Multichannel 5.1
Audio
Both CAT-6a cables (VIDEO and DDC) must be used for extension.
HDMI 1.3 compliant. Please see page 3 for a list of supported HDMI 1.3
features.
HDCP compliant.
FEATURES
Features
Flexible extension of high-bandwidth HDMI 1.3 thanks to the
performance and reliability of 75Ohm RG-6U Coax cable.
Audio and video are transmitted digitally over the 75Ohm RG-6U Coax
cable for zero signal loss.
Single Link Range: 1080p/60, 12 bit color depth, 1920x1200.
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards
Supports digital video formats in Deep Color Mode at up to 12bits/color
Supports PCM L/R audio
Supports IR Pass thru function and control HDMI source devices
(set-top box, DVD player and Blue ray DVD Player ) in Receiver by its
IR remote controller.
Supports Cascade function in Transmitter and Receiver and easy to
build a network system by installer.
Features
• Lip-Sync Pass Through
• 340 MHz (up to 12 bit YUV 444 Supported @ 1080p)
• Deep Color Supported (XV Color Supported)
• Cascade function in Transmitter and Receiver.
• CEC Pass Through & xvYCC Supported
Package Includes
(1) RX HDMI Over Single Coax Receiver
(1) 6 Foot HDMI Cable (M-M)
(1) 6 Foot IR Receiver Cable
(1) 12V DC Power Supply
(1) Set of Wall Mounting Plates
(1) User’s Manual
RECEIVER UNIT PANEL LAYOUT
Front Panel
HDMI
HDMI Output
Back Panel
IR Receiver
Power LED
Indicator
DC 12V 1A
Power Input
IR Receiver
Input Port
Cascade Port
RECEIVER UNIT PANEL DESCRIPTIONS
1
12V1A DC Power Input Port
Connect the included 5V DC power supply to this input port.
2
Power Indicator LED
This LED indicator will become active once the included 5V DC power
adapter has bee properly connected between the sender unit and an
open wall power socket.
3
HDMI Output Port
Connect the HDMI cable from HDTV display to HDMI output port.
4
Coax BNC Port
Connect a 75Ohm RG-6U Coax cable between this output port and the
input port on the transmitter unit.
Connect extra 75Ohm RG-6U Coax cable between cascade port and the
input port on the extra receiving unit.
5
IR Port (IR Receiver)
Connect a IR Receiver Cable to IR port and fix IR receiver cable near to
your HDTV display..
CONNECTING AND OPERATING
How to Connect the RX HDMI Over SINGLE COAX
RECEIVER WITH CASCADE FUNCTION
1. Connect the HDMI source device to the RX HDMI Over Single Coax
Extender transmitter unit using the supplied HDMI cable.
2. Connect one 75Ohm RG-6U Coax cables between the output port of
transmitter and input port of number A receiver.
3. Connect one 75Ohm RG-6U Coax cables between the cascade port of
receiver and input port of number C receiver.
4. Connect the HDTV display HDMI input port to the HDMI Over Coax
receiver using a HDMI cable.
5. Connect the included 12V DC power supplies to both the transmitter
and receiver units.
6. Power on the output device first and the source second.
SPECIFICATIONS
Video Amplifier Bandwidth .............................................................. 340 MHz
Video Output ........ 1080p/60, 12 bit color depth, 2k and 1920x1200 max. res
Input DDC Signal .......... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p
HDMI Connector .......................................................... Type A, 19 Pin Female
Link Connector .......................................................................... BNC Shielded
Power Supply ......................... 12V DC / Power Consumption: 12 Watts max.
Operating Temperature ..................................................................... 0°C - 40°C
Shipping Weight ........................................................................................ 3 lbs.
Dimensions ................................................................. 3.4” W x 1.3” H x 3.3” D
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising