PRODUCT DATASHEET SLICE PRO TOM APPLICATIONS Air Bag & Squib Fire with Internal Data Recorder Airbag testing The SLICE PRO TOM (Timed Output Module) generates Automotive safety precisely timed, high-energy firing signals for a wide variety Biomechanics of pyrotechnic devices and squibs used in air bag and Blast dynamics pretensioner testing. It also generates isolated digital outputs which are often needed to initiate or synchronize Pre-tensioner testing other events in the test lab. The SLICE PRO TOM includes Pyrotechnic devices analog recording of firing voltage and current waveforms and can be used standalone or as part of the modular and Squib fire crashworthy SLICE PRO onboard data acquisition system. Each SLICE PRO TOM fires up to 4 pyrotechnic devices with squib firing delays from 0 to 99 seconds with 0.1msec resolution. Need more TOM channels? Simply add more modules. SLICE PRO is a complete solution with Ethernet or USB controllers, plus configurable modules to support sensor inputs, air bag fire, trigger distribution and digital inputs. Features Software • 4 independently programmable pyrotechnic/squib fire outputs with 0.1 msec timing resolution DTS DataPRO software offers a full-featured database and user interface for tracking sensor information, creating test objects and test setups, performing diagnostic routines and running tests. It also features the most advanced self-diagnostics available plus support for EQX and numerous data exchange file formats. • 8 independently programmable digital outputs for controlling other systems requiring timed outputs • Continuous monitoring of connected squib resistance • Software adjustable sampling rates • Configures with SLICE PRO SIM, SLICE PRO DIM and USB or Ethernet communication via SLICE PRO Controllers PRODUCTS • Shock rated and 100% tested to 100 g Diversified Technical Systems • Small size, low mass – each module is 52 x 90 x 80 mm designs and manufactures • Built-in one hour battery with automatic charging circuit data acquisition systems, • Safety features integrated in system design sensors, and software for beginning and advanced test professionals. • LED indicators for channel and module status • Intuitive DataPRO software www.dtsweb.com DSH-008 (REV 11.2015) Specifications PHYSICAL Description: Size: Mass: Connectors: ENVIRONMENTAL Operating Temp.: Humidity: Shock: Timed Output Module 52 x 90 x 80 mm 750 g (26 oz) LEMO 0 to 60°C (32 to 140°F) Contact DTS for extended temperature applications 95% RH non-condensing 100 g, 12 msec half sine SQUIB FIRE CHANNELS SERVICES 24/7 Worldwide Tech Support ISO 17025 (A2LA) Calibration Onsite Calibration & Training Application Consulting Software Integration OEM/Embedded Applications Number: Energy Delivery: Source Voltage: Constant Current Output: Energy Storage: Rise Time: Output Connector: TIMING CONTROL Method: Delay for each output channel can be independently programmed via software Delay Range: 0-99 seconds after trigger input Squib Duration: 0.2-25.5 msec or continuous Digital Output Duration: 0.2-1.6 msec or continuous Resolution: 0.1 msec EVENT INPUT Each Module: False Trigger: Multiple Modules: SAFETY FEATURES General: Warning Signals: Output Interlock: Automatic Disable: North America United Kingdom Europe Japan Asia-Pacific Standard contact closure input, galvanically and optically isolated to 1 kV EMI, RFI, and ESD protection Event input may be connected in parallel across several modules Three-layer safety protocol. 1) Software key 2) Software arm signal 3) Hardware arming signal plug 1) LEDs indicate when the system is armed 2) 5 V, 20 mA output may be used to drive facility warning devices Outputs cannot be armed without physically inserting a plug or supplying a remote arming signal Unless requested to perform a test, energy storage devices are automatically drained Method: 1 mA applied current, 2--wire method standard, 4-wire method optional Resistance Check: Software programmed pass/fail tolerance window, measured values recorded Measurement Range: 0-10 ohms Resolution: 12-bit OUTPUT WAVEFORM RECORDING General: Method: Sampling Capability: Memory Type: Two measurements/ch (8 total per module): 1) current waveform 2) initiation signal/voltage waveform 16-bit SAR (Successive Approximation Register) ADC, one per channel, simultaneous sample of all channels. Up to 500k sps with adjustable anti-alias filter automatically set under software control 16 GB non-volatile flash per module SELF-TEST FEATURES General: Output Verification: Auto checks critical voltages & displays status Built-in 2.0 ohm dummy loads are used to test output waveforms during pretest checks Measurement Self-test used to verify channel gains and Channels: function LED Status Indicators: 1) Power (3 color) 4) Squib Channel Status (2 color) 1) Trigger Status (red) DIGITAL OUTPUT CHANNELS General: Output Type: 8 outputs available on a single connector Compatible with devices requiring isolated contact closure and/or CMOS/TTL-compatible levels (0-5 V). Logic polarity is software programmable. > 5 mA per channel 19-pin LEMO 2B Drive Capability: Connector: POWER External Voltage: Maximum Power: Protection: Internal Battery Type: Run Time: Recharge Time: 9-15 VDC; Note: 12-15 VDC required for charging internal battery 800 mA (per 4-channel module) Self-resetting fuses plus reverse current and transient over-voltage protection Lithium Polymer with built-in charger. One hour fully armed 3-4 hours SOFTWARE TEST ARTICLE AUTOMATIC ID Control: Operating Systems: Communication: SLICEWare, DataPRO, API Windows® XP/Vista/7/8 (32/64-bit) USB 2.0 or Ethernet 10/100M Type Supported: Part# 13000-40400 SLICE PRO TOM, with accessories Includes TOM Terminal Box for easy screw-terminal access to up to 8 digital outputs Method: TECH CENTERS 4 per module Capacitive discharge, constant current 17 V 1.0-4.0 A software adjustable in 0.1 A increments. >300 mJ per channel <50 µsec One 6-pin LEMO 2B connector per channel (+output, -output, +sense, -sense, +ID, -ID) SQUIB RESISTANCE TESTS Serial data read from digital I/O line in squib fire connector Maxim Integrated (Dallas) “1-wire” silicon serial number. Part# 13000-30730 SLICE PRO TOM, no accessories Authorized DTS Representative: HEADQUARTERS Seal Beach, California USA Designed to support a variety of applications, SLICE PRO is a complete data acquisition solution with software, user-configurable modules and a full line of accessories. CONTACT US Phone: +1 562 493 0158 Email: email@example.com www.dtsweb.com Specifications subject to change without notice. © Diversified Technical Systems, Inc.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project