The Ruckus ZF 7055 Wall Switch Access Point

The Ruckus ZF 7055 Wall Switch Access Point
data sheet
BENEFITS
Dual band concurrent operation
Industry’s first 2.4 GHz and 5.0 GHz concurrent wall
switch allows for efficient meshing while streaming
multiple applications simultaneously
Gigabit Uplink
Maximizes the network capability to ensure seamless
multi-client streaming connectivity
Ubiquitous connectivity for converged IP services
Multiple SSIDs, port-based VLANs and robust
authentication options make the ZoneFlex 7055 ideal
for supporting concurrent IP-based services such as
VoIP, IPTV, high-speed Internet access and in-room
device connectivity
Flexible deployment options
The ZoneFlex 7055 requires a single POE cable drop,
reducing cabling, switch ports and power sourcing
equipment or power adapter
Easy installation
Installs into any standard network wall jack, offering
two Ethernet uplink options: RJ-45 connector and a
110 punch down block
Wall mounted, inconspicuous compact form factor
for best aesthetics with universal form factor
Low profile design and front port access eliminates
unsightly cabling and disruptive furniture placement
Integrated POE support eliminates more wires
Provides POE out to power devices such as IP-based
VoIP phones eliminating the need for more power
chords that clutter the environment
Plug and play for existing digital phones
Passthrough port allows native connectivity for existing
digital phones or others
ZoneFlex 7055
™
MULTIPURPOSE DUAL BAND CONCURRENT
802.11N WIRED/WIRELESS WALL SWITCH
High Performance 2x2:2 Integrated Wired/Wireless Wall Switch
The Ruckus ZoneFlex 7055 is the industry’s first dual band concurrent
wired and wireless wall switch that integrates high-speed 802.11n Wi-Fi
into an ultra-sleek, low-profile design that can be quickly and discretely
installed in a standard wall junction box.
Ideal for offering converged services within hotel guest rooms and
university dormitories, the ZoneFlex 7055 provides an easy way to offer
multiple connections into a single room without multiple cables.
The ZoneFlex 7055 delivers high performance 2.4GHz and 5 GHz 802.11n
wireless coverage and four wired Ethernet access connections that can
be used to support a range of in-room IP device and user connectivity
options. An additional pass-through port allows connectivity for digital
phones that requires native access to an in-house PBX system.
An IEEE 802.3af-compliant POE port, up to 6.5 watts, powers devices
such as IP telephones directly from the wall switch. The ZoneFlex 7055
requires only a single POE cable drop thereby reducing cabling, switch
ports, and power sourcing equipment.
The ZoneFlex Wi-Fi Wall Switch is completely inconspicuous, minimizing
the protrusion off the wall to make in-room cabling and furniture
arrangement simple. Flexible deployment options allow the ZoneFlex 7055
to be easily installed via two uplink Ethernet options: an RJ-45 Ethernet
jack or a 110 punch down block connection.
The ZoneFlex 7055 can be deployed as a standalone device or centrally
managed by the Ruckus ZoneDirector or FlexMaster Wi-Fi system
management platform.
With the ability to broadcast up to 8 SSIDs per radio, the ZoneFlex 7055
supports port-based VLANs. Authentication options include: 802.1x,
MAC-based, captive portal, LDAP, RADIUS, Active Directory and through
an internal user database.
ZoneFlex 7055
™
MULTIPURPOSE DUAL BAND
CONCURRENT 802.11N WIRED/
WIRELESS WALL SWITCH
FEATURES
t Integrated 2x2:2 600Mbps Wi-Fi AP and Ethernet wall switch
t Dual band 11n Wi-Fi and four Ethernet access ports offers
HSIA with a Gigabit Ethernet uplink
136 mm
t Wi-Fi Redundancy, in-room coverage
t Powered by either POE or 48VDC
t Supplies POE power 7W or 15W
t SmartCast QoS
30 mm
136 mm
t 8 BSSIDs per radio with unique QoS and security policies
t WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
t 802.1X support for RADIUS and Active Directory*
Digital PBX
Pass Through
t Zero-IT and Dynamic PSK*
t Captive portal and guess accounts*
t Mounts into standard US and EU single gang wall jack
t RJ-45 or 110 punch down block options for uplink
Ethernet port
t One RJ-45 pass-through connection
t Universal form factor
POE In Port
in 110 Punch
Down Block
POE Uplink Port
t SmartMesh capable
t Torx screws to secure AP and provide security against
opportunistic theft or tampering
* with ZoneDirector
page 2
ZoneFlex 7055
™
MULTIPURPOSE DUAL BAND
CONCURRENT 802.11N WIRED/
WIRELESS WALL SWITCH
Converged Wired and Wireless Services
Laptop
SmartPhone
Digital Phone
VoIP Phone
In-room IP device
(eg. minibar)
IPTV
Printer
page 3
Specifications
PHYSICAL CHARACTERISTICS
POWER
POWER DRAW
MULTIMEDIA AND QUALITY OF SERVICE
tPOE 802.3af/802.3at
t48VDC input
tPOE: Idle (3.6 w); Typical (4.5 w);
Peak (6.5 w)
tDC-Powered: Idle (3.8 w);
Typical (4.7 w); Peak (6.7 w)
PHYSICAL SIZE
802.11e/WMM
tSupported
SOFTWARE QUEUES
tPer traffic type (4), per client
TRAFFIC CLASSIFICATION
tAutomatic, heuristics and TOS
based or VLAN-defined
RATE LIMITING
tDynamic, per-user or per-WLAN
t13.6 cm x 13.6 cm (Square), 3 cm
(Deep)
tNEMA 1 Type 1 / IP 20
MANAGEMENT
WEIGHT
t292 g (.64 Lbs.)
t392 g (.86 Lbs.) with bracket
DEPLOYMENT OPTIONS
PHYSICAL PORTS
t4 10/100 Mbps Base-T 802.3,
tStandalone (individually managed)
tManaged by ZoneDirector
tManaged by FlexMaster
CONFIGURATION
tWeb User Interface (HTTP/S)
tCLI (Telnet/SSH), SNMP v1, 2, 3
tTR-069 vis FlexMaster
AUTO AP SOFTWARE UPDATES
tFTP or TFTP, remote auto available
ENVIRONMENTAL
CONDITIONS
802.3 u, RJ-45 Ethernet
access ports.
t1 10/100/1000Mpbs Base-T 802.3,
802.3 u, 802.3 ab, 802.3 af (802.3
at Type 1) PoE input, Class 3. RJ-45
and punch down connector
t1 RJ-45 pass-through port; RJ45
to RJ45
WI-FI
tOperating Temperature:
STANDARDS
32°F (0°C) - 122°F (50°C)
tOperating Humidity: 10% - 95%
non-condensing
RF
MAXIMUM EIRP
tUp to 27 dBm*
PHYSICAL ANTENNA GAIN
t2 dBi (2.4GHz); 3 dBi (5.0GHz)
MINIMUM RX SENSITIVITY
tUp to -90 dBm
concurrent operation
RADIO CHAINS
t2 x 2
SPATIAL STREAMS
t2
RF POWER OUTPUT PER
CHANNEL
t2.4 GHz: 19 dBm
t5.0 GHz 16 dBm*
FREQUENCY BAND
t802.11b/g/n 2.4-2.484GHz
t802.11a/n: 5.15-5.25 GHz;
OPERATING CHANNELS
tUS/Canada: 1-11
tEU (ETSI X30): 1-13
tChannel availability is country
5.25-5.35 GHz; 5.47-5.725 GHz
PERFORMANCE AND CAPACITY
CONCURRENT USERS
tUp to 500
VOICE CALLS
tUp to 30
APPLICATIONS
tIEEE 802.11a/b/g/n
tDual band (2.4GHz and 5 GHz)
dependent according to the local
regulations
t5 GHz Channels
BSSID
t8 BSSIDs per radio
WIRELESS SECURITY
tWEP, WPA-PSK, WPA-TKIP, WPA2
AES, 802.11i
HOTSPOT
tWISPr
VOICE
t802.11e/WMM
tU-APSD
tAuthentication via 802.1X with
ZoneDirector, local authentication
database, support for RADIUS,
LDAP, and Active Directory
* Maximum power varies by country
NETWORK ARCHITECTURE
IP
tIPv4, IPv6, dual-stack
VLANs
t802.1Q (1 per BSSID or dynamic,
Product Ordering Information
MODEL
DESCRIPTION
per user based on RADIUS)
tPort-based
ZoneFlex 7055 Wi-Fi Wall Switch
802.1X FOR ETHERNET PORTS
tAuthenticator
tSupplicant
Optional Accessories
TUNNELING
tL2TP, PPPoE
901-7055-XX01
Dual band Wi-Fi Wall Switch
902-0170-XX10
Power Supply (Qty. 10)
902-0111-0000
Adjacent wall plate jacket
PLEASE NOTE: When ordering you must specify the destination region
by indicating -US, -UN, or -WW instead of XX.
Copyright © 2012, Ruckus Wireless, Inc. All rights reserved. Ruckus Wireless and Ruckus Wireless design
are registered in the U.S. Patent and Trademark Office. Ruckus Wireless, the Ruckus Wireless logo, BeamFlex,
ZoneFlex, MediaFlex, MetroFlex, FlexMaster, ZoneDirector, SpeedFlex, SmartCast, and Dynamic PSK are
trademarks of Ruckus Wireless, Inc. in the United States and other countries. All other trademarks mentioned in
this document or website are the property of their respective owners. 801-70689-001 rev 08
Ruckus Wireless, Inc.
350 West Java Drive
Sunnyvale, CA 94089 USA
(650) 265-4200 Ph \ (408) 738-2065 Fx
www.ruckuswireless.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising