ALL AUDIENCES THE #1 SPEAkER BRAND* ALL

ALL AUDIENCES THE #1 SPEAkER BRAND* ALL
THE FOLLOWING PREVIEW Has bEEN aPPROvEd FOR
ALL AUDIENCES
by
THE #1
SPEAkER BRAND*
THEsE CINEMa sPEaKERs HavE bEEN RaTEd
A++
WARNING
SOUND MAY BE EVEN BETTER
THAN THE MOVIE
FOR MORE INFO, GO TO THE NEXT CLIP …
* # 1 Best Price/Value by the Inside Track Annual Dealer Survey. An annual independent nationwide survey of consumer electronics specialist retailers and custom installers.
★ Cinema Trio
★ Cinema Sub
★ Cinema 400
Cinema CT Systems in home theaters summer 2011
★ Cinema 200
★ Cinema 100
Now in Wide Release
Across Cinema, acoustic achievements include lower frequency extension, flat response curves, lower distortion,
sustained sensitivity and improved dispersion.
Cinema 100 CT: 5 x Cinema 100 satellites • 1 x Cinema Sub
special Effects
• S-PAL™ satin-anodized pure-aluminum domes
• Wire-mesh tweeter guard; WaveGuide™ technology
• Mineral-filled polypropylene cones
• Additional mineral content stiffens cone composition
• Reference-quality crossovers
• Push-thru binding posts with Easy-Glide™ channels
• Deep articulate bass via the new Cinema Sub
visual Effects
• New curved profile with industrial high-gloss finish
• Sculpted acoustic-suspension cabinets
• Streamlined stands for bookshelf models (included)
• On-wall models feature EasyMount™ system
• Removable self-aligning StayTight™ magnetic grilles
More
Cinema Sub
300 watts Dynamic Peak Power / 100 watts RMS Sustained
deeper and louder bass than the Cinema satellites can
provide with dramatic dynamic range
• 8˝ high-excursion driver made of a durable reinforced
polymer composite that allows the bass cone to travel
farther but with effective control during that extended travel
• Dual-ported design for more even and articulate bass response
• Two aesthetic placement options: Gloss Side Up or Cloth Side Up
• 4 feet are included to prevent floor vibrations and resonances
from coloring sound during moments of extreme output
Cinema Sub is included with a Cinema CT system, otherwise it
is sold separately.
Controls:
• Auto On / Standby /
Soft Clipping
• Subwoofer Cut-Off
Frequency
• Sub / Sat Phase
Alignment Switch
Inputs:
Two inputs both
are Line-Level
PRODUCT CONSUMES LESS
THAN 0.5 WATTS IN STANDBY.
shown: Cloth side up with
feet attached
More
Breakout Performance by …
Best performance for drivers in a shared role! That of supplying
a blockbuster music and home theater experience
Mounting Systems
The Tweeter
Cinema on-wall models feature Paradigm’s
EasyMount™ system
• Extremely thin bracket takes up very little space on
the wall
• Mounting process is simple
The Bass/Midrange
Driver
Table-top stands included with Cinema 100
• 3-pc. system includes vertical stands and a
horizontal stand for the center configuration
• 2-pc. system includes vertical stands
1 Center stand with Cinema 200, Cinema 400
and Cinema Trio (not shown)
• Included with each speaker for use in the
horizontal configuration
More
Cameo Appearances …
Create a Home Theater system to meet your customers’
needs: budget, style and space!
Cinema 200 system:
an ‘any flat-panel’
complement
• 3 x Cinema 200
• 2 x Cinema 100
• 1 x Cinema Sub
Applause for a Standout Supporting Cast
Cinema 400 system:
Ideal for larger flat
panel systems.
• 3 x Cinema 400
• 2 x Cinema 100
• 1 x Cinema Sub
Cinema Trio system:
For those who love a
soundbar look!
• 1 x Cinema Trio
• 2 x Cinema 100
• 1 x Cinema Sub
MC-30 stand
• For Cinema 100 only
• Aluminum post and polymer base with
cast-iron weight
• Customized polymer bracket head
• 30” high
• Black
(Sold separately)
Monitor surround 1
and Monitor surround 3
More
ALL-STAR CAST & technical credits
Cinema 100
Cinema 400
Design: 2-driver, 2-way acoustic suspension. stand-mounted/wall-mounted
Crossover: 2nd-order electro-acoustic at 1.8 kHz
HigH-FrequenCy Driver: 25-mm (1 in) S-PAL™ satin-anodized pure-aluminum dome,
ferro-fluid damped and cooled
Bass/MiDrange Driver: 102-mm (4 in) mineral-filled polypropylene cone,
25-mm (1 in) high-temperature voice coil, advanced motor structures and oversized ferrite magnets
Low-FrequenCy extension: 85 Hz (DIN)
FrequenCy response: On-axis: ±2 dB from 125 Hz – 20 kHz;
30° off-axis: ±2 dB from 125 Hz – 15 kHz
sensitivity – rooM / aneCHoiC: 88 dB / 85 dB
suitaBLe aMpLiFier power range: 15 – 100 watts
MaxiMuM input power†: 50 watts
iMpeDanCe: Compatible with 8 ohms
DiMensions (h x w x d): 21.2 cm x 12.2 cm x 15.7 cm;
8-3/8 in x 4-13/16 in x 6-13/16 in
weigHt (unpacked): 1.8 kg / 4.0 lb per speaker (with stand)
Design: 5-driver, 2-1/2-way acoustic suspension LCR on-wall with option to sit
center speaker on a table or shelf with supports included
Crossover: 2nd-order electro-acoustic at 2.1 kHz;
2nd-order electro-acoustic at 500 Hz (bass drivers)
HigH-FrequenCy Driver: 25-mm (1 in) S-PAL™ satin-anodized pure-aluminum dome,
ferro-fluid damped and cooled
Bass/MiDrange Driver: 102-mm (4 in) mineral-filled polypropylene cone,
25-mm (1 in) high-temperature voice coil, advanced motor structures with oversized ferrite magnets
Bass Driver: Two 102-mm (4 in) mineral-filled polypropylene cones,
25-mm (1 in) high-temperature voice coils, advanced motor structures and oversized ferrite magnets
Low-FrequenCy extension: 75 Hz (DIN)
FrequenCy response: On-axis: ±2 dB from 115 Hz – 20 kHz;
30° off-axis: ±2 dB from 115 Hz – 15 kHz
sensitivity – rooM / aneCHoiC: 95 dB / 92 dB
suitaBLe aMpLiFier power range: 15 – 200 watts
MaxiMuM input power†: 100 watts
iMpeDanCe: Compatible with 8 ohms
DiMensions (h x w x d): 67.0 cm x 16.1 cm x 10.4 cm;
26-3/8 in x 6-5/16 in x 4-1/16 in
weigHt (unpacked): 5.8 kg / 12.8 lb per speaker (with stand)
Cinema 200
Design: 3-driver, 2-way acoustic suspension LCR on-wall with option to
sit center speaker on a table or shelf with supports included
Crossover: 2nd-order electro-acoustic at 1.8 kHz
HigH-FrequenCy Driver: 25-mm (1 in) S-PAL™ satin-anodized
pure-aluminum dome, ferro-fluid damped and cooled
Bass/MiDrange Driver: Two 102-mm (4 in) mineral-filled polypropylene cones,
25-mm (1 in) high-temperature voice coils, advanced motor
structures with oversized ferrite magnets
Low-FrequenCy extension: 80 Hz (DIN)
FrequenCy response: On-axis: ±2 dB from 120 Hz – 20 kHz;
30° off-axis: ±2 dB from 120 Hz – 15 kHz
sensitivity – rooM / aneCHoiC: 90 dB / 87 dB
suitaBLe aMpLiFier power range: 15 – 150 watts
MaxiMuM input power†: 70 watts
iMpeDanCe: Compatible with 8 ohms
DiMensions (h x w x d): 50.5 cm x 16.1 cm x 10.4 cm;
19-7/8 in x 6-5/16 in x 4-1/16 in
weigHt (unpacked): 3.7 kg / 8.3 lb per speaker
Cinema Trio
Design: On-wall left speaker & right speaker & center speaker; 7-driver, 3-channel,
2-way acoustic suspension: option to sit speaker on table or shelf with supports included
Crossover: 2nd-order electro-acoustic at 1.8 kHz
HigH-FrequenCy Drivers: Three 25-mm (1 in) S-PAL™ satin-anodized pure-aluminum dome,
ferro-fluid damped and cooled
Bass/MiDrange Drivers: Four 102-mm (4 in) mineral-filled polypropylene cones,
25-mm (1 in) high-temperature voice coil, advanced motor structures with oversized ferrite magnets
Low-FrequenCy extension: 85 Hz (DIN)
FrequenCy response: On-axis: ±2 dB from 125 Hz – 20 kHz;
30° off-axis: ±2 dB from 125 Hz – 15 kHz
sensitivity – rooM / aneCHoiC: 89 dB / 86 dB
suitaBLe aMpLiFier power range: 15 – 200 watts
MaxiMuM input power†: 70 watts
iMpeDanCe: Compatible with 8 ohms
DiMensions (h x w x d): 16.1 cm x 91.5 cm x 10.4 cm,
6-5/16 in x 36 in x 4-1/16 in
weigHt (unpacked): 7.6 kg / 16.8 lb
More
More
Cinema Sub
Design: Single driver, bass reflex, high-velocity low-turbulence resitive ports,
built-in amplifier, flexible positioning: gloss side up or cloth side up with feet
aMpLiFier: HigH-Current DisCrete output: 300 watts Dynamic Peak
100 watts RMS Sustained
aMpLiFier Features: Auto-on; standby; soft clipping
Bass Driver: 210-mm (8 in) high-excursion reinforced co-polymer polypropylene
composite cone, 38-mm (1-1/2 in) voice coil
Low-FrequenCy extension*: 32 Hz (DIN)
suBwooFer Cut-oFF FrequenCy: Variable 35 Hz – 150 Hz; bypass option
suB / sat pHase switCH: Variable 0° or 180°
Line-LeveL input: Two RCA (L/R-Mono) for L/R lineout or Sub-Out/LFE-Out
of receiver/processor or other line-level source
Line-LeveL input iMpeDanCe: 10k ohms
HeigHt, wiDtH, DeptH (gloss side up, height is with feet):
34.2 cm x 32.2 cm x 32.2 cm; 13-7/16 in x 12-11/6 in x 12-11/16 in
weigHt (unpacked): 9.7 kg / 21.4 lb
PRODUCT CONSUMES LESS
THAN 0.5 WATTS IN STANDBY.
★ Shown: Cinema 400’s
†
*DIN 45 500 Indicates –3 dB in a typical listening room.
With typical program source providing the amplifiers clips no more than 10% of the time.
Copyright © Paradigm Electronics Inc. All rights reserved. Paradigm reserves the right to change
specifications and/or features without notice as design improvements are incorporated
Cinema 100
Cinema 200
Cinema 400
Cinema Trio
Cinema Sub
w w w. p a r a d i g m . c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising