Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing

Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing
Holders & Stops
Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents
Holders & Stops
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features and Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
590 Series Heavy Duty Overhead Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
690 Series Heavy Duty Overhead Concealed Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1540 Series Standard Duty Overhead Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1530 Series Standard Duty Overhead Concealed Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1560 Series Electromagnetic Door Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Overhead Holder & Stop Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Finishes & Door Closer Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
On the Cover
590 Series Heavy Duty Surface Mount Overhead Holder
1561 Electromagnetic Wall Mount Door Holder
1-800-727-5477 • www.sargentlock.com
Overview
Holders & Stops
Introduction to SARGENT Overhead Holders & Stops
SARGENT overhead stops/holders are designed to protect the door and hardware from the abuse commonly found in commercial and
institutional applications. With different series that include surface or concealed, standard or heavy duty, SARGENT has a stop/holder
for every application.
Overhead stops/holders are the most robust method of stopping a door while eliminating unsightly wall stops and floor stops.
An overhead door stop protects the opening by effectively distributing abusive forces. Some door closers are available with stops/
holders incorporated into them and work well in most cases, but continuous abuse can lead to frame and hinge failure. SARGENT
overhead stops/holders are designed and manufactured for many years of service. The 590, 690,1530 and 1540 series come with a
5 year warranty.
Applications
Office Buildings
Assisted Living Facilities
Hotel Guest Rooms
Public Housing
Retail Establishments
281 PD10 with 590 Series stop in a 26 finish
1-800-727-5477 • www.sargentlock.com
1
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
1431 P3 Shown with 1548 Stop
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
•
•
•
•
•
SARGENT Traditional Holders & Stops
General Information
Holders & Stops
Selecting an Overhead Stop/Holder
The traditional line of Sargent overhead Holders & Stops is unsurpassed in the industry in regards to aesthetic details and quality.
The 590 heavy-duty surface applied and 690 concealed heavy-duty series are designed for use on exterior doors and highly abused
interior doors. The 1530 concealed series and the 1540 surface applied series are designed for use on interior doors.
All stops/holders are templated and installed for a particular degree of opening ranging between 85° to 110°. All SARGENT overhead
holders/stops include a heavy duty spring designed to gradually absorb impact forces over a 3° to 9° of opening. When using holders
and stops on doors opening against a wall or back to back, they should be templated/installed to eliminate the trim from coming into
contact with the walls or each other.
When using vertical rod exit devices and or surface/flush bolts, use caution in choosing the proper size to ensure compatibility.
281 PD10 with 590 Series stop in a 26 finish
Warranty
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
All 590, 690, 1530 and 1540 Series Holders and Stops carry a 5 year
limited warranty for defects.
2
1-800-727-5477 • www.sargentlock.com
1431 P3 Shown with 1548 Stop
SARGENT Traditional Holders & Stops
Features and Details
Holders & Stops
Attention to detail and rugged design has made the SARGENT line of overhead stops and holders the premier door control products
in the industry today. Our finely finished holders and stops are built from heavy gauge materials with attention to every detail. This
produces a product that is strong and aesthetically pleasing.
Finished pivots
Decorative turn knob
finished same as track
Finished end caps recessed in channel
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
•ANSI/BHMA Certified: All 590 and 690 series holders & stops are ANSI/BHMA Grade 1 Certified
•Heavy duty architectural bronze construction
•UL Classified: The 590, 690, 1530 and 1540 stops are UL 10B and UL 10C classified as a
miscellaneous fire door accessories
•Corrosion resistance: Metal construction provides corrosion resistance in a variety of conditions
•Holder Selector: 590 and 690 series holders are equipped with a turn knob to activate and
deactivate the hold open function
•Zinc end caps
•Through-bolts capture channel and end caps
•Heavy duty shock spring absorbs load and gradually stops door
Aesthetics:
•Metal construction provides superior quality plated finishes
•Finished End Caps: End caps recessed into channel and finished same as channel
•Finished Rivets: Fasteners used to secure the arm to the slide and the jamb bracket are polished
and finished the same as the rest of the holder
•Finished holder turn lever: SARGENT 590 and 690 holders are built with a finished holder turn
knob without any exposed screws
•Finished channel corners: Corners of the channels are polished to match the rest of the arm
and channel
Convenience:
•Minimal number of sizes required to cover all door widths
•Standard holder sizes based on standard door widths
•Non-handed
1-800-727-5477 • www.sargentlock.com
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Features
3
590 Series Heavy Duty Overhead
Surface Mount
Holders & Stops
Interior or Exterior – High Traffic Doors
590 Series
Surface Application
590 Series
•
Surface application for exterior and interior single acting doors
• Two types to choose from:
– “H” Holder; Stops and Holds
doors open
– “S” Stop; Stops door only
• A
ll holders/stops are installed for a particular degree of hold open or stop ranging from 85° – 110°
ANSI/BHMA A156.8 Grade 1
590H Series BHMA Certified to CO2511
590S Series BHMA Certified to CO2541
597H shown
UL Classified
• S
ARGENT 590 Series stops are UL 10B & 10C
classified by Underwriter Laboratories as
Miscellaneous Fire Door Accessories
Note: Door stops are not fire rated. The door
and frame carry the fire rating
Hold-Open Models
• Convenient knob provides simple
“on-off” control of hold-open feature
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
• Adjustable release tension
Accessories
Shims
•
Optional 1/4" thick jamb bracket shims for
use with frames with blade stops
• Order as required by 21-0104 x finish with screws listed below
Specifications
For DoorsExterior and interior doors from 24" – 60" wide* and for doors
1-3/4" – 2" thick standard, Available for doors up to 3-1/4" thick,
use 31- option and specify thickness
Finishes
03, 04, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 26, 26D EN, EB, ED, EP
and EAB
Fasteners
Wood screws, machine screws, through-bolts,
Mortise nuts supplied as standard for 1-3/4"– 2" thick doors.
For doors more than 2" and less than 3-1/4", use 31– option and specify thickness
Options
31- Doors 2-1/4" – 3-1/4" thick, specify door thickness
36- Torx security machine screws for exposed screws on doors
up to 2" thick. 6 per holder/stop
CPC-Clear Powder Coat
* When using vertical rod exit devices and/or surface/flush bolts, use caution in choosing the
proper size to ensure compatibility
Machine Screws
•
Used with above 590 shims up to 3/4" thick. 01-3454 x finish, 4 required
(1/4-20 x 1-1/4")
•
Standard screw pack for 1-3/4" – 2" door. 21-2302 x finish
No. 195 Angle Bracket
For Flush Door and Frames
590 Series holders can be mounted on flush
door and frame assemblies through the use of
the SARGENT 195 Angle Bracket. This handed
bracket allows the mounting of the Jamb
bracket to the top casing.
4
How to Order
Specify options, number, letter designation, finish and door thickness as required.
Example: 31-SG-597H x 04 x 2-1/2" door
Sizing Chart
Actual
Width of Door
Stop with
Hold-open
Stop
Only
24" – 32-1/2"
597H
597S
32-5/8" – 39-1/8"
598H
598S
39-1/4" and over
599H
599S
1-800-727-5477 • www.sargentlock.com
690 Series Heavy Duty Overhead
Concealed Mount
Holders & Stops
Interior or Exterior – High Traffic Doors
690 Series
Concealed Application
690 Series
• Concealed application for exterior and
interior single or double acting doors
• Two types to choose from:
– “H” Holder; Stops and Holds
doors open
– “S” Stop; Stops door only
• B
oth series can be mounted to stop the door at any angle from 85° – 110°
• Non-handed (Reversible)
ANSI/BHMA A156.8 Grade 1
690H Series BHMA Certified to CO1511
690 S Series BHMA Certified to CO1541
697H shown
Specifications
For DoorsExterior and interior doors from 24" – 60" wide*.
For doors 1-3/8" – 1-3/4" thick standard, Available for doors up
to 3-1/4" thick, use 31- option and specify thickness
Hold-Open Feature
• Convenient knob provides simple
“on-off” control of hold-open feature
Finishes
• Adjustable release tension
FastenersWood screws and machine screws provided
Accessories
Options
31- Doors 2" – 3-1/4" thick, specify door thickness
36- Torx Security machine screws. 8 required
CPC-Clear Powder Coat
• Standard screw packs
690H Series
690S Series
21-2263 x finish
21-2267 x finish
03, 04, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 26, 26D, EN, EB, ED, EP
and EAB
and specify thickness
How to Order
Specify options, number, letter designation, finish and door thickness as required.
Example: 31-CPC-697H x 03 x 2" door
Sizing Chart
Actual
Width of Door
Stop with
Hold-open
Stop
Only
24" – 32-1/2"
697H
697S
32-5/8" – 39-1/8"
698H
698S
39-1/4" and over
699H
699S
* When using vertical rod exit devices and/or surface/flush bolts, use caution in choosing the proper size to ensure compatibility
351-P10 shown with 697S
on a single acting door
1-800-727-5477 • www.sargentlock.com
5
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
• S
ARGENT 690 Series stops are UL 10B & 10C
classified by Underwriter Laboratories as
Miscellaneous Fire Door Accessories
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
UL Classified
1540 Series Standard Duty
Overhead Surface Mount
Holders & Stops
Interior – Medium Traffic Doors
1540 Series
• Surface application for interior single
acting doors. Three types to choose from:
– “H” – “S” – “F” Surface Application
1540 Series
Holder; Stops and Holds
doors open
Stop; Stops door only
Friction Type; Holds door open
• Holder/Stop is surface mounted with arm and bracket attached to top jamb
Hold Open With Stop Type:
• Holds door open for a particular degree from 85° – 110°
• Hold-open feature engages and releases easily by a push or pull action
• Release tension is easily adjustable
Stop Only Type:
• Used to stop door with shock absorber spring
1548S Shown
Specifications
For DoorsInterior doors 18-1/2" up to 48" wide*, 1-3/8" to 1-3/4" thick
standard, Available for doors up to 2-1/4" thick, use 31- option and
specify thickness
• Protects wall and door
• Maximum door opening 110°
Friction Type:
• Prevents unwanted movement of door
• Not for use with a door closer
• Can be held in any position up to 110°
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
• Friction unit is made of heavy duty brake lining type material
• Adjustable friction control
ANSI/BHMA A156.8 Grade 1
1540 F Series complies to C05531
1540 H Series complies to C05511
1540 S Series complies to C05541
Finishes
03, 04, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 26, 26D, EN, EB, ED, EAB
and EP
Options
31- Doors 1-7/8" – 2-1/4" thick, specify door thickness
36- Torx Security machine screws. 6 required
CPC- Clear Powder Coat
How to Order
Specify options, number, letter designation, finish and door thickness as required
Example: 31-CPC-1537F x 26D x 2" door
1540 Series furnished with through-bolt and grommet nut for mounting on doors, 1-3/8" – 1-3/4"
thick only. For other doors up to 2-1/4" thick, specify thickness when ordering. For center hung
pivots, consult factory.
Sizing Chart
UL Classified
• S
ARGENT 1540 Series stops are UL 10B & 10C
classified by Underwriter Laboratories as
Miscellaneous Fire Door Accessories
Note: Stops are not rated. The door and frame carry the fire rating
Accessories
Shims
• Optional 1/4" thick jamb bracket shims for use
with frames with blade stops.
Machine Screws
• Order as required by 21-0198 x finish
Actual Width of Door
Hold-Open with Stop
Stop Only
Friction Stop/Holder
18-1/2" – 25"
1546H
1546S
1546F
25-1/8" – 32-1/2"
1547H
1547S
1547F
32-5/8" – 40"
1548H
1548S
1548F
40-1/8 – 48"
1549H
1549S
1549F
No. 145 Angle Bracket
For Flush Door and Frames
Series 1540 Overhead Door Holders can be mounted on flush doors and frames using the No. 145
Angle Bracket. This bracket allows the mounting of the arm to the top casing. Bracket is not handed.
• U
sed with above shims up to 3/4" thick. Four
required per overhead. Order by
01-3436 x finish (12-24 x 1-1/4")
145 Angle Bracket
* When using vertical rod exit devices
and or surface/flush bolts, use caution
in choosing the proper size to ensure
compatibility
• Standard screw pack 21-2031 x finish
145 ANGLE BRACKET SHOWN WITH 1540
WITH FLUSH TRANSOM OR RABBETED DOORS
6
1-800-727-5477 • www.sargentlock.com
1530 Series Standard Duty
Overhead Concealed Mount
Holders & Stops
Interior – Medium Traffic Doors
1530 Series
Concealed Application
1530 Series
• Concealed application for interior single or double acting doors opening to 110°
• Three types to choose from:
– “H” Holder; Stops and Holds
doors open
– “S” Stop; Stops door only
– “F” Friction Type; Holds door open
• Holder/Stop is concealed with arm and bracket mortised into jamb
Hold-Open With Stop:
• Release tension is easily adjustable
Stop Only Type:
• Used to stop door with shock
absorber spring
• Protects wall and door
• Maximum door opening 110°
Friction Type:
• Prevents unwanted movement of door
• Not for use with a door closer
• Can be held in any position up to 110°
• Friction unit is made of heavy duty
brake lining type material
1538 S shown
Specifications
For Doors
Interior doors 19" up to 48" wide*, 1-3/8" – 1-3/4" thick,
as standard. Available for doors up to 2" thick, use 31- option
and specify thickness
Finishes
03, 04, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 26, 26D, and EN, EB, ED EAB and EP
Fasteners
Wood screws, machine screws provided as standard
Options
31- Doors 1-7/8" – 2" thick, specify door thickness
36- Torx Security machine screws. 6 required
CPC-Clear Powder Coat
* When using vertical rod exit devices and or surface/flush bolts, use caution in choosing the
proper size to ensure compatibility
•Adjustable friction control for varying conditions
ANSI/BHMA A156.8 Grade 1
1530F Series complies to C04531
1530H Series complies to C04511
1530S Series complies to C04541
UL Classified
•
SARGENT 1530 Series stops are UL 10B & 10C
classified by Underwriter Laboratories as
Miscellaneous Fire Door Accessories
Sizing Chart
Actual Width of Door
Hold-Open with Stop
Stop Only
Friction Stop/Holder
19" – 25"
1536H
1536S
1536F
25-1/8" – 32-1/2"
1537H
1537S
1537F
32-5/8" – 40"
1538H
1538S
1538F
40-1/8" – 48"
1539H
1539S
1539F
Sizing Chart For Center Hung Pivots Only
Hold-Open with Stop
Stop Only
Friction Stop/Holder
21-1/4" – 26-5/8"
1536H
1536S
1536F
26-3/4" – 32-1/2"
1537H
1537S
1537F
Accessories
32-5/8" – 40"
1538H
1538S
1538F
• Standard screw pack 21-2019 x finish
40-1/8" – 48"
1539H
1539S
1539F
Note: Stops are not rated. The door and frame carry the fire rating
Actual Width of Door
How to Order
Specify options, number, letter designation, finish and door thickness as required.
Example: 31-CPC-1537F x 26D x 2" door
1-800-727-5477 • www.sargentlock.com
7
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
• Hold-open feature engages and releases easily by a push or pull action
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
• Holds door open for a particular degree from 85° to 110°
1560 Series Electromagnetic
Door Holders
Holders & Stops
Electromagnetic Door Holder
•Designed for use with self-closing fire and smoke barrier doors
•Use independently or with any fire or smoke detector system
•When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing
•Designed to work with SARGENT door closers
• Meets ANSI/BHMA A156.15
• Recommended vertical location is on top rail of door – within 6" of lock stile edge
• UL Listed to U.S. and Canadian
safety standards
•When applications will not allow wall or
floor magnets, consult SARGENT’s FireGuard
catalog for our line of Electronic Closer
Holders
•
1" (25mm) extension p/n 52-2573 included
standard to increase armature projection to
2-5/8" (67mm)
• Fits standard outlet box
• Fail-safe device: When electrical power fails, doors will release to close automatically
• Holding force – 35 lbs typical
•
• Conforms to devices outlined in National Fire Protection Agency Standards Nos. 80 and 101
Voltage and Current:
120 VAC, 60 Hz., .020 amp
24 VAC/DC, 60 Hz., .020 amp
12 VDC, .040 amp
•Order as:
1561 for Flush Mount
1560 for Surface Mount
1562 for Single Floor Mount
1563 for Double Floor Mount
• Finish – EN
Wall Mount
1560 Surface Mount
1561 Flush Mount
1"
(25mm)
2-3/4"
(70mm)
2-1/2"
(64mm)
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
1-5/8"
(41mm)
1-3/4"
(44mm)
4-5/8"
(117mm)
1561
2-17/32"
(64mm)
1560
Floor Mount
1562 Single Floor Mount
1563 Double Floor Mount
5"
(127mm)
4-3/4"
(121mm)
3-1/8"
(79mm)
1562
8
1-800-727-5477 • www.sargentlock.com
1-3/4"
(44mm)
5"
(127mm)
1-5/8"
(41mm)
2-17/32"
(64mm)
1-5/8"
(41mm)
3-1/8"
(79mm)
1563
4-3/4"
(121mm)
Overhead Holder & Stop
Installations
Holders & Stops
Concealed Mounting (690 or 1530 Series)
Double Acting Doors
Standard Installation
Frame
Door
The channel is mortised into the door
and the jamb bracket is mortised into
the frame. Channel and jamb bracket
fastened with wood or machine screws.
Mortised
Jamb Bracket
Frame
This mounting is similar to the standard
concealed mounting with additional
door prep to allow for arm clearance
on both sides of door.
Door
Concealed Channel
Surface Mounting (590 or 1540 Series)
Frame
Standard Push
Side Installation
The jamb bracket is surface
applied to the stop and
the channel surface applied
to door.
Frame
Door
Door
Flush Frame Push Side Installation
Use the 145 angle bracket for the
1540 series or 195 angle bracket
for the 590 series.
Frame
Frame
Door
Shims
Door
Blade Stop Frame Install
Similar to the above, except
jamb bracket shims are used
as required.
Frame
Flush Frame Pull Side
Application
Use the 145 angle bracket for
the 1540 series.
Door
1-800-727-5477 • www.sargentlock.com
9
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Channel
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Jamb Bracket
Finishes & Door Closer
Compatibility Chart
Holders & Stops
Note: EN Finish standard for 1560 Series, consult factory for other painted colors
Frequently Used SARGENT Door Closers with Overhead Holders and Stops
• Standard Door Closer Applications (PULL SIDE MOUNT)
590 Series with 281, 351, 1431 Series with “O” Arm
690 Series with 281, 351, 1431 Series with “O” Arm
1530 Series with 281, 351, 1431 Series with “O” Arm
1540 Series with 281, 351, 1431 Series with “O” Arm
• Parallel Arm Door Closer Applications (PUSH SIDE MOUNT)
590 Series with 281, 351, 1431 Series with “P3” Arm
690 Series with 281, 351, 1431 Series with “P9” Arm
690 Series with 281, 351, 1431 Series with “P10” Arm
1530 Series with 281, 351, 1431 Series with “P9” Arm
1430-P3 Shown w/1548S
530 Series with 281, 351, 1431 Series “P10”
1540 Series with 281, 351, 1431 Series with “P3” Arm
• Parallel Arm Door Closer Applications Used with a Flush Frame
590 Series with 281, 351, 1431 Series with “P4” ARM
690 Series with 281, 351, 1431 Series with “P4” ARM
1530 Series with 281, 351, 1431 Series with “P4” ARM
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
540 Series with 281, 351, 1431 Series with “P4” ARM
• Inverted Top Jamb Applications
590, 690, 1530, 1540 Series with 281, 351, 1431 Series and “O” OZ, OZA arm
Note: This chart is only a quick reference. Some applications may require the
use of 145 or 195 angle bracket
Contact factory for special applications.
351 P10 Shown w/697S
10
1-800-727-5477 • www.sargentlock.com
SARGENT Manufacturing Company
100 Sargent Drive
New Haven, CT 06511 USA
800-727-5477
www.sargentlock.com
Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for
new construction, renovation, and replacement applications. The company’s customer base includes commercial construction, institutional, and industrial markets.
Copyright © 2003, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without
the express written permission of Sargent Manufacturing Company is prohibited.
90124:M 05/09/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising