FireFlies Audio LLC FireFlies Earbuds Instructions

FireFlies Audio LLC FireFlies Earbuds Instructions

FireFlies Earbuds are wireless earbuds that connect to your Bluetooth device to play audio. They offer a variety of features, including the ability to change tips and locking wings for a more secure fit, as well as a control button for pausing, playing, and skipping tracks.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

FireFlies Earbuds Instructions | Manualzz

S

FIREFLIES

Instructions

ACCESSORIES

◦ 3 sets of tips

◦ 3 sets of locking wings

◦ Micro-USB Cable

M

LED Indicator

Power / Control Button

Charging Leads

Silicone Tip

L

Lid

Charging Pins

LED Indicator

Micro-USB Port

HOW TO WEAR

Insert the silicone tip straight into the ear canal until it is snug.

Left Ear Left Earbud

Twist earbud down to sit perfectly in outer ear pocket. The circular surface should be facing directly outwards once the earbud is securly in place.

X

HOW TO CHANGE TIPS

Pull the tip off of the earbud. Add a new tip by inserting the inner cylinder of the tip around the cylinder protruding from the earbud’s main body and pushing downwards until the new tip is secure.

HOW TO USE LOCKING WINGS

For extra security, the locking wings can be added by sliding them onto the earbud. The earbud is inserted into the ear as normal and the wing can be pushed into the curve at the front of the ear.

HOW TO USE FIREFLIES

- Turn on both earbuds. Put the Right earbud into pairing mode.

- Turn on Bluetooth on the device that will play audio.

- Select “FireFlies” in your device’s Bluetooth menu.

- Wait until your device confirms the connection.

- The earbuds will turn off if not paired within 3 minutes.

Audio played through the connected Bluetooth device will now be heard through the earbuds.

FireFlies will automatically pair with your device next time you turn them on and activate Bluetooth.

Function

Turn ON Earbud

Pairing Mode

(R only)

Pause/Play

Next Track

Previous Track

Turn OFF Earbud

Button Press

Hold for 2 seconds

Hold for 3 seconds

Press 1 time

Press 2 times

Press 3 times

Hold for 5 seconds

LED INDICATORS

EARBUDS

LED Color Behavior

Flashes every second

2 flashes every 5 sec

Alternating

Solid for 2 seconds

Flashes every 3 sec

Status

ON; not paired to L/R

ON; paired to L/R

Pairing mode

Earbud is turning OFF

Low battery

EARBUDS IN CHARGING POD

LED Color Behavior

Solid

Solid

Status

Recharging

Fully charged

CHARGING POD

LED Color Behavior

Solid

Status

Recharging

HOW TO CHARGE THE BATTERIES

Place the earbuds in the charging pod, making sure that the charging leads on the earbuds align with the charging pins in the charging pod. Close the lid to begin charging. If this is done correctly, the LED indicators on each ear bud will illuminate red.

Charging takes about 1 hour. The red LED will turn green when charging is complete.

To recharge the charging pod, plug the Micro-USB cable into the charging pod and the other end into a power source. The LED indicator next to the Micro USB port will turn green if this is done correctly.

When charging is complete, the green LED will turn off.

© 2016 FireFlies Audio LLC. All Rights Reserved. FireFlies is a registered trademark of FireFlies Audio LLC. All other logos and trademarks are property of their respective owners. Patents Pending.

TIPS AND TRICKS FOR OPTIMAL PERFORMANCE

In the rare event that you experience any connectivity issues, here are some best practices that we recommend trying in order to ensure optimum Bluetooth connectivity:

- The Bluetooth transceiver of your

FireFlies is located on the right ear

bud, so the closer you can

comfortably get your connected

Bluetooth audio device to the right

ear bud, the better

High

- Place your Bluetooth device on

the right side of your body

- Avoid using thick or metal

phone cases

- Avoid areas with a high density

of other Wi-Fi or Bluetooth signals

- Position your phone closer to the signal

by using an arm band

Medium

Low

WHAT DO I DO IF AUDIO IS ONLY PLAYING OUT OF 1 EARBUD?

If the power is on for both earbuds and only one is playing music, then the earbuds are not paired correctly to each other. Use the LED

INDICATORS chart to check if each earbud is paired properly.

If one of the earbuds is not paired to the other, turn the right earbud off and then on again and the two earbuds should pair correctly to each other so that music is playing from each of them. Double check the

LED behavior to ensure that each earbud is paired properly.

PLEASE CONTACT US WITH ANY QUESTIONS.

WE WOULD LOVE TO HELP!

801.701.0096 / [email protected] / FireFliesAudio.com

advertisement

Key Features

  • Bluetooth connectivity
  • Changeable tips and locking wings
  • Control button for music playback
  • LED indicators for status
  • Charging pod for earbuds
  • Micro-USB charging cable

Frequently Answers and Questions

How do I change the tips on my FireFlies earbuds?
To change the tips, pull the tip off of the earbud. Insert a new tip by inserting the inner cylinder of the tip around the cylinder protruding from the earbud's main body and pushing downwards until the new tip is secure.
How do I use the locking wings on my FireFlies earbuds?
For extra security, the locking wings can be added by sliding them onto the earbud. The earbud is inserted into the ear as normal and the wing can be pushed into the curve at the front of the ear.
How do I charge my FireFlies earbuds?
Place the earbuds in the charging pod, making sure the charging leads align with the charging pins. Close the lid to begin charging. The LED indicators will turn red. Charging takes about 1 hour. The red LED will turn green when charging is complete.
What do I do if audio is only playing out of one earbud?
If the power is on for both earbuds and only one is playing music, the earbuds are not paired correctly. Use the LED indicators chart to check if each earbud is paired properly. If one of the earbuds is not paired to the other, turn the right earbud off and then on again. The two earbuds should pair correctly to each other so that music is playing from each of them. Double check the LED behavior to ensure that each earbud is paired properly.

Related manuals

Download PDF

advertisement