Open Frame 2.4-6/336 - Copenhagen Sensor Technology

Open Frame 2.4-6/336 - Copenhagen Sensor Technology
Open Frame 2.4-6/336
650 TVL electronic day/night camera system – easy integration
Datasheet
Features







650 TVL resolution camera
Configurable lens 2.4 to 6 mm, f/1.6
Composite and digital output
Wide temperature range, -40°C to +70°C
Fog penetration
Expanded Hi-Dynamic Range
Digital Noise Reduction
Description
External video input / Image fusion
The Open frame 2.4-6/336 module is a 1/3” electronic
day/night CCD camera system with integrated FOVconfigurable lens, designed to deliver high performance in
extreme temperatures.
The camera is an electronic day/night camera, meaning it can
automatically switch between colour and monochrome
operation depending on the light level. It also features an
Extended Night Mode, with up to 4 seconds integration.
It is designed to operate in temperatures ranging from -40°C
to +70°C and is therefore suitable for installation in e.g. areas
with very warm climate without the expense of installing a
cooling system.
In order to reduce the number of channels required for slipring transmission, the system can support input from an
external camera, such as a thermal imaging camera. Switching
between the daytime and external nighttime camera can be
manual or automatic.
Fog penetration
The fog penetration function is designed to automatically
increase visibility under conditions such as fog, haze and fire
smoke. The camera continuously analyses the picture and
once it detects a low-contrast condition, it will automatically
enhance the contrast.
Digital Noise Reduction (DNR)
Conducted cooling
The Open frame 2.4-6/336 camera uses conducted cooling to
remove heat from the CCD sensor. The main benefit of this is
that it reduces the noise from the CCD thereby providing a
better video image, particularly in low-light conditions.
The Digital Noise Reduction function in the LunaVision+
camera analyses the video image and reduces the noise,
particularly in low-light conditions. The analysis is based on 2
and 3-dimensional algorithms.
Digital Continuous Zoom
Expanded Hi-Dynamic Range (XDR)
XDR is useful in conditions where there are large variations in
brightness in the picture, i.e. when there are very dark and
very bright areas in the picture. XDR amplifies the signal level
in dark areas and reduces it in very bright areas thereby
improving the visibility in the picture.
The Open frame 2.4-6/336 module provides continuous
digital zoom with 2x range, selectable from the On Screen
Menu (OSM) or via the serial interface.
Reduction of heat haze disturbance
With the Heat haze function turned on, you get a more stable
and clear image since the function reduces the disturbance of
heat waves that blurs the image.
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/Date
Author
L12-000-D01
B / May 2016
XB
Open Frame 2.4-6/336
650 TVL electronic day/night camera system – easy integration
Datasheet
Mechanical outline and dimensions
Side view 1
Rear view
Side view 2
Front view
Top view
Note: Lens shown in maximum wide FOV setting (maximum protrusion)
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/Date
Author
L12-000-D01
B / May 2016
XB
Open Frame 2.4-6/336
650 TVL electronic day/night camera system – easy integration
Datasheet
Specifications
PAL
Image system
Sensor
Effective pixels (H x V)
Image format
Scanning system
Horizontal frequency
Vertical frequency
Integrated lens
Electrical specifications and functions
Video output, analogue
Video output, digital
Horizontal resolution
Sensitivity
Signal to noise ratio
Electronic shutter
- Fixed
Auto Iris
Gamma correction
Automatic Gain control
- AGC range
Automatic Integration mode
- Range
Colour suppression for night mode
Spectral response
NTSC
High-sensitivity colour CCD with complementary mosaic
976 x 582
976 x 494
4:3
2:1 Interlace
15.625 kHz
15.734 kHz
50 Hz
59.94 Hz
FOV configurable from 95° to 44° (2.4 to 6 mm, f/1.6)
CVBS, composite video or YC, 1 Vpp, 75 ohm
ITU 656, 36 Mhz
650 TVL
0.007 lx, 25% video, F1.6, AGC on
> 52 dB, AGC Off
1/50 to 1/10,000 sec.
1/60 to 1/10,000 sec.
Integrated Direct Drive
0.45 / 1.0
On / Off
36 dB analogue, 24 dB digital
On / Off
Up to 4 sec.
Electronic
400-700nm if ordered with IR-cut filter
400-950nm if ordered without IR-Cut filter
Off, Low, Mid, High
ATW and AWB
2D and 3D Digital Noise Reduction in 2 levels
On and off function
On / Off
2 x range / Zoom window position / Off
OSD menu and serial UART interface
English, Japanese
Fog penetration
White balance
Noise reduction
Heat haze reduction
Backlight Compensation (BLC)
Continuous Digital Zoom
Configuration
OSD Languages
Mechanical
Mounting holes
Overall dimensions (W x H x L)
Net weight
Video connector, VBS
Video connector, YUV 4.2.2
Power, data
Environmental
Operating voltage
Current consumption
Operating temperature
Storage temperature
Operating humidity
Vibration
Shock
4 x M3, on front flange surface
45 x 45 x 65.7 mm (with max. protrusion of lens in wide setting)
140 g
Molex 53398-0671 (JP2)
Kyocera/Elco 04-6214-012-010-894+ (JP3)
molex 53398-0671 (JP2)
12 VDC ±10%
200 mA
-40°C to +70°C
-40°C to +70°C
Max. 80%, non-condensing
Tracked vehicle MIL-STD 810G , method 514.6 – 6.25grms
3 shocks in each direction, 30G @ 11ms
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/Date
Author
L12-000-D01
B / May 2016
XB
Open Frame 2.4-6/336
650 TVL electronic day/night camera system – easy integration
Datasheet
About Us
CST - Copenhagen Sensor Technology A/S is a privately held Danish company specialising in the
design and manufacture of high-performance electro-optical solutions for demanding battlefield
and surveillance applications.
Founded in 2001, CST has rapidly grown to a mature organisation, capable of serving a global
customer base. In modern facilities on the outskirts of Copenhagen, Denmark, CST houses R&D,
production, QA and sales and marketing functions. With a collective experience in CCD camera,
optics, electronics and software development, the highly skilled staff at CST is committed to creating
rugged, durable and innovative electro-optical solutions.
CST is certified to ISO 9001:2008, which applies to the whole process flow of design, development,
manufacturing and testing. Furthermore, ISO 10007:2003 configuration management standards are
used as a guideline for design and development activities. CST products are not restricted by ITAR.
Customer and OEM solutions
CST has a long tradition of working closely with its customers, identifying unmet needs and
creating solutions with sustainable value for the users.
With a strong R&D base at the headquarters in Denmark, CST is able to provide mechanical, optical,
software and hardware customisations while meeting the toughest requirements for military,
homeland security and high-end surveillance applications.
Whether the need calls for a ruggedized high-precision zoom lens or a highly sensitive CCD camera,
or a complete system comprising lens, camera and advanced video processing, CST can offer a fasttrack design process. Contact us to discuss your specific requirements. Together we can create a
solution that provides the best price and performance ratio.
Copenhagen Sensor Technology A/S
Symfonivej 15
DK-2730 Herlev
Denmark
Phone
E-mail
Web
+45 44 92 18 55
info@copst.com
www.copst.com
Document no.
Revision/Date
Author
L12-000-D01
B / May 2016
XB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising