IP-S101
dedicated KVM switch and rackmount screen technology
User Manual
IP-S101
Combo KVM Extender
751
Designed and manufactured by Austin Hughes
UM-CV-751-IP-S101-Q413V3
www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-IP-S101-Q413V3
www.austin-hughes.com
Contents
< Part. 1 > IP-S101
1.1
1.2
Package Contents
Specification
P.1
P.2
< Part. 2 > Application
2.1
2.2
Connection to KVM console port over IP
Connection to computer over IP
P.3
P.4
P.5
< Part. 3 > IP Initial Setup
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 >
IP-S101
< 1.1 > Package Contents
IP-S101 unit X 1
- CE-6 6ft Combo KVM cable X 1
- Power adapter w/ power cord ( for receiver ) X 1
UM-CV-751-IP-S101-Q413V3
P.1
www.austin-hughes.com
< 1.2 > Specification
IP-S101
USB
Mouse KB
VGA
Virtual
KVM / PC Media
Serial
LAN
Front
Power
PS/2
Mouse KB
Rear
IP-S101 Specification
IP Connection
1 x RJ-45 Ethernet 10/100
Console connection
1 XDB-15 VGA, up to 1600 x 1200
2 x USB type connector for keyboard & mouse
2 x PS/2 mini Din 6-pin for keyboard & mouse
PC connection
1 x DB-15 combo KVM port
Virtual Media
USB type B receptacle
Serial
1 x DB9 male
Power
12V power adapter
Operation Temperature
0 ~ 50 °C
Storage Temperature
-5 ~ 60 °C
Humidity
0~80%, Non-Condensing
Dimension
203.5W x 113.3D x 27.3H mm
Weight
1.7 kg / 3.74 lb
Environmental
RoHS2 & REACH compliant
UM-CV-751-IP-S101-Q413V3
P.2
www.austin-hughes.com
IP-S101
< Part 2 > Application
< 2.1 > Connection to KVM console port over IP
USB Console
KVM switch
32
31
30
29
28
27
26
25
16
15
14
13
12
11
10
9
24
23
22
21
20
19
18
17
8
7
6
5
4
3
2
1
CE-6 combo
KVM cable
Rear
Front
Monitor
CAT 5 / 6 cable
max. 100m
Network device
hub or router
Inter net
UM-CV-751-IP-S101-Q413V3
P.3
www.austin-hughes.com
IP-S101
< 2.2 > Connection to computer over IP
Computer
CE-6 combo
KVM cable
Rear
Front
Monitor
CAT 5 / 6 cable
max. 100m
Network device
hub or router
Inter net
UM-CV-751-IP-S101-Q413V3
P.4
www.austin-hughes.com
IP-S101
< Part 3 > IP Initial setup
After the cable connection, please take the following steps to configure the IP KVM Extender :
1. Download IPKVMsetup.exe from the link:
www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe
2. Double click IPKVMsetup.exe to configure the IP KVM Extender by device setup as below.
3.
4.
5.
6.
7.
8.
9.
Click Refresh Device to search the connected IP KVM Extender
Select the M.A.C. address, which you want to setup, then click Query Device
Enter Super user login. The default is super
Enter Super user password. The default is pass
Enter the new super user password
Re-enter the new password
Change the desired IP address / Subnet mask / Gateway, then click Setup Device to
confirm the setting to IP KVM Extender
10. The default address is http://192.168.1.22
11. Open Internet Explorer ( I.E. ), version 6.0 or above
12. Enter the IP KVM Extender address into the address bar
- For Single IP - http://192.168.1.22
13. Enter username ( default is super )
Password ( default is pass )
14. After successful login to IP KVM Extender, the user will enter the main page of IP KVM Extender
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual from the link :
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-IP.pdf
UM-CV-751-IP-S101-Q413V3
P.5
www.austin-hughes.com
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2013 Austin Hughes Electronics Ltd. All rights reserved.
UM-CV-751-IP-S101-Q413V3
www.austin-hughes.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising