Speed Systems

Speed Systems
Quality
tools for
Installing
Power Cable
Systems
Speed Systems, Inc. • PO Box 581 • Brookfield • WI 53008-0581
Ph: 262-784-8701 • Fax: 262-784-8703 • www.spdsystems.com
9/15
Contents
Primary Cable Prep
Quality
toolsfor
Installing
Power Cable
Systems
Speed Systems has been manufacturing quality,
field-tested products since 1970. Our tools are
designed and built in our manufacturing facility in
Brookfield, Wisconsin.
We focus on safety, efficiency, ergonomics and
value as we design and build tools to meet specific
customer needs. We offer solutions for preparing
primary and secondary cable for termination,
as well as products for installing specific
cable system components.
We take pride in supplying high quality tools
and look forward to working with you on your
specific applications or needs.
Underground
Jacket Removal
NW-15/NW-35
LPW-N Series Probe Wrenches
Insulation Removal
1542 Series
1542 Series Accessories
Mark Series
Semi-Con Scoring
1700 Adjustable Blade Series
1701 Fixed Blade Series
1800 Adjustable Blade Series
1801 Fixed Blade Series
Chamfering Tools
CT Series
Aerial Tree Wire and Spacer Cable
2900 Series
Component Installation/Removal Tools
2
2
2
4
5
8
8
9
9
10
10
10
10
10
10
Torqueing Tools
Bushing Insert Tools
200A BIT
BIT/E180 Series
BIT/TK Series
600A LRTP
LRTP/TK240 Series
LRTP/TK55 Series
TPH-1
600A Accessories
Loadbreak Probe Tools
LPW1525 Series
LPW35R Series
Deadbreak Probe Tool
DPW1525
Elbow and Cap Pulling Tools
PT-1525
PT-35
16
16
Ratcheting Box Wrenches
RBW-QUAD1
Dogbone Wrenches
Hex Wrenches
Penta Socket with ergonomic handle
Specialty Wrenches
Sockets/Combination
Build Your Own Wrench
RBW-TD Series
ISE Series
17
17
18
20
20
20
21
22
23
Non Isolated Accessories
Blades
1542 Series Stripping Blades
Mark Series Stripping Blades
Semi-Con Scoring Blade
Chamfering Blade
Secondary Stripping Blades
Aerial Tree Wire/Spacer Cable Blade
14
14
14
15
15
Isolated Accessories
6
6
7
7
Secondary Cable Prep
2750
End and Mid Span Strip
2850
TAT – T-Body and Cable Adapter Tool
SAT – Splice Assembly Tool
TAT/SAT – Combination Tool
CJT – Cable Joint Tool
CLEER – 600A Loadbreak Tool
11
11
11
12
12
12
Overhead Lineman’s Wrench
(OHW Series)
Penta/Hex Security Wrenches
Knives and Pliers
UTR
ECT-2
Tool Bags and Boxes
Steel Boxes
Canvas Bags
Individual Tool Bags
Kits
Custom Tools
Penciling Tools
Drill Operated Isolated
Secondary Strippers
Covered Tap Wire Strippers
24
24
25
25
25
26
26
26
27
28
28
28
13
13
13
www.spdsystems.com
•
262-784-8701 1
Contents
Primary Cable Prep
Quality
toolsfor
Installing
Power Cable
Systems
Speed Systems has been manufacturing quality,
field-tested products since 1970. Our tools are
designed and built in our manufacturing facility in
Brookfield, Wisconsin.
We focus on safety, efficiency, ergonomics and
value as we design and build tools to meet specific
customer needs. We offer solutions for preparing
primary and secondary cable for termination,
as well as products for installing specific
cable system components.
We take pride in supplying high quality tools
and look forward to working with you on your
specific applications or needs.
Underground
Jacket Removal
NW-15/NW-35
LPW-N Series Probe Wrenches
Insulation Removal
1542 Series
1542 Series Accessories
Mark Series
Semi-Con Scoring
1700 Adjustable Blade Series
1701 Fixed Blade Series
1800 Adjustable Blade Series
1801 Fixed Blade Series
Chamfering Tools
CT Series
Aerial Tree Wire and Spacer Cable
2900 Series
Component Installation/Removal Tools
2
2
2
4
5
8
8
9
9
10
10
10
10
10
10
Torqueing Tools
Bushing Insert Tools
200A BIT
BIT/E180 Series
BIT/TK Series
600A LRTP
LRTP/TK240 Series
LRTP/TK55 Series
TPH-1
600A Accessories
Loadbreak Probe Tools
LPW1525 Series
LPW35R Series
Deadbreak Probe Tool
DPW1525
Elbow and Cap Pulling Tools
PT-1525
PT-35
16
16
Ratcheting Box Wrenches
RBW-QUAD1
Dogbone Wrenches
Hex Wrenches
Penta Socket with ergonomic handle
Specialty Wrenches
Sockets/Combination
Build Your Own Wrench
RBW-TD Series
ISE Series
17
17
18
20
20
20
21
22
23
Non Isolated Accessories
Blades
1542 Series Stripping Blades
Mark Series Stripping Blades
Semi-Con Scoring Blade
Chamfering Blade
Secondary Stripping Blades
Aerial Tree Wire/Spacer Cable Blade
14
14
14
15
15
Isolated Accessories
6
6
7
7
Secondary Cable Prep
2750
End and Mid Span Strip
2850
TAT – T-Body and Cable Adapter Tool
SAT – Splice Assembly Tool
TAT/SAT – Combination Tool
CJT – Cable Joint Tool
CLEER – 600A Loadbreak Tool
11
11
11
12
12
12
Overhead Lineman’s Wrench
(OHW Series)
Penta/Hex Security Wrenches
Knives and Pliers
UTR
ECT-2
Tool Bags and Boxes
Steel Boxes
Canvas Bags
Individual Tool Bags
Kits
Custom Tools
Penciling Tools
Drill Operated Isolated
Secondary Strippers
Covered Tap Wire Strippers
24
24
25
25
25
26
26
26
27
28
28
28
13
13
13
www.spdsystems.com
•
262-784-8701 1
NW-15 - 15/25kV Neutral Winder
For cable 1" to 2-1/2" O.D.
(24.4 - 63.5 mm)
Underground • Jacket Removal
Neutral Winder
The Neutral Winder is designed to remove the outer jacket on underground
power cable with embedded neutral wires. The end of one of the neutral
wires is inserted through the center cross-hole and is wound up as it is
pulled through the jacket as the tool is rolled along the axis of the cable.
This method of jacket removal reduces neutral wire damage or breakage
while splitting the outer jacket.
The Neutral Winder will not work on jacketed cable that has a Mylar,
plastic or tape layer between the neutral wire and the jacket.
The tool includes a 3/8" drive in the hub.
NW-35 - 35kV Neutral Winder
For cable 2-1/4" to 3-1/2" O.D.
(57.2 - 88.9 mm)
Underground • Jacket Removal
LPW-N Series Probe Wrenches
The LPW1525/TK120X-N and LPW35R/TK120XN combine
the torque limiting probe installation features of the LPW Series
Loadbreak Probe Wrench with an added Neutral Winding Grove
and cross hole providing neutral winding capability for removal
of the outer jacket.
The Neutral Winder reduces neutral wire damage
or breakage while splitting the outer jacket.
The LPW1525/TK120XN fits all 15kV and 25kV elbows
and Elastimold 35kV elbows.
The LPW35R/TK120XN only fits the large interface
Eaton (Cooper/RTE) and Hubbell (Chardon) 35kV elbows.
(Left)
LPW1525/TK120X-N
Combination Tool with
Neutral Winder
(Right)
LPW35R/TK120X-N
Combination Tool with
Neutral Winder
Underground • Insulation Removal
1542-2AS Series Combination Strippers
Underground • Insulation Removal
1542-2AS Series Combination Strippers
Cable O.D. Range 1/2" to 1-3/4" (12.7 - 44.5 mm)
1542-2CL Series
1542-2CL Series Insulation Strippers
Cable O.D. Range 1/2" to 1-3/4" (12.7 - 44.5 mm)
The 1542-2AS Series Stripper is designed to remove PE, XLP, EPR
and other types of insulation from power cable, as well as score the
cable's semi-conductive outer shield with precise accuracy.
The 1542-2CL Series Stripper is designed to remove PE, XLP,
EPR and other types of insulation from power cable.
The 1542-2AS combines the features of the 1542-2CL
Speed Stripper and 1700 Semi-Con Scorer.
The tool provides precise blade depth adjustment and
maximizes the reliability of installation.
The tool provides precise blade depth adjustment
and maximizes the reliability of installation.
No bushings are required.
KV Class / Conductor Size
• 5kV / 1000 MCM and smaller
• 15kV / 750 MCM and smaller
• 25kV / 350 MCM and smaller
• 35kV / 3/0 and smaller
For larger cables refer to Mark I,
Mark II and Mark III tools.
2
262-784-8701
•
www.spdsystems.com
1542-2CL - Speed Stripper
With Wedge Blade installed,
spare Straight Blade
1542-2CL-1 - Speed Stripper
With Wedge Blade installed,
spare Wedge Blade
1542-2CL-2 - Speed Stripper
With Straight Blade installed,
spare Straight Blade
No bushings are required.
KV Class / Conductor Size
• 5kV / 1000 MCM and smaller
• 15kV / 750 MCM and smaller
• 25kV / 350 MCM and smaller
• 35kV / 3/0 and smaller
For larger cables refer to Mark I,
Mark II and Mark III tools.
1542-2AS - Combination Stripper
With Wedge Blade installed,
spare Straight Blade
1542-2AS-1 - Combination Stripper
With Wedge Blade installed,
spare Wedge Blade
1542-2AS-2 - Combination Stripper
With Straight Blade installed,
spare Straight Blade
www.spdsystems.com
•
262-784-8701 3
NW-15 - 15/25kV Neutral Winder
For cable 1" to 2-1/2" O.D.
(24.4 - 63.5 mm)
Underground • Jacket Removal
Neutral Winder
The Neutral Winder is designed to remove the outer jacket on underground
power cable with embedded neutral wires. The end of one of the neutral
wires is inserted through the center cross-hole and is wound up as it is
pulled through the jacket as the tool is rolled along the axis of the cable.
This method of jacket removal reduces neutral wire damage or breakage
while splitting the outer jacket.
The Neutral Winder will not work on jacketed cable that has a Mylar,
plastic or tape layer between the neutral wire and the jacket.
The tool includes a 3/8" drive in the hub.
NW-35 - 35kV Neutral Winder
For cable 2-1/4" to 3-1/2" O.D.
(57.2 - 88.9 mm)
Underground • Jacket Removal
LPW-N Series Probe Wrenches
The LPW1525/TK120X-N and LPW35R/TK120XN combine
the torque limiting probe installation features of the LPW Series
Loadbreak Probe Wrench with an added Neutral Winding Grove
and cross hole providing neutral winding capability for removal
of the outer jacket.
The Neutral Winder reduces neutral wire damage
or breakage while splitting the outer jacket.
The LPW1525/TK120XN fits all 15kV and 25kV elbows
and Elastimold 35kV elbows.
The LPW35R/TK120XN only fits the large interface
Eaton (Cooper/RTE) and Hubbell (Chardon) 35kV elbows.
(Left)
LPW1525/TK120X-N
Combination Tool with
Neutral Winder
(Right)
LPW35R/TK120X-N
Combination Tool with
Neutral Winder
Underground • Insulation Removal
1542-2AS Series Combination Strippers
Underground • Insulation Removal
1542-2AS Series Combination Strippers
Cable O.D. Range 1/2" to 1-3/4" (12.7 - 44.5 mm)
1542-2CL Series
1542-2CL Series Insulation Strippers
Cable O.D. Range 1/2" to 1-3/4" (12.7 - 44.5 mm)
The 1542-2AS Series Stripper is designed to remove PE, XLP, EPR
and other types of insulation from power cable, as well as score the
cable's semi-conductive outer shield with precise accuracy.
The 1542-2CL Series Stripper is designed to remove PE, XLP,
EPR and other types of insulation from power cable.
The 1542-2AS combines the features of the 1542-2CL
Speed Stripper and 1700 Semi-Con Scorer.
The tool provides precise blade depth adjustment and
maximizes the reliability of installation.
The tool provides precise blade depth adjustment
and maximizes the reliability of installation.
No bushings are required.
KV Class / Conductor Size
• 5kV / 1000 MCM and smaller
• 15kV / 750 MCM and smaller
• 25kV / 350 MCM and smaller
• 35kV / 3/0 and smaller
For larger cables refer to Mark I,
Mark II and Mark III tools.
2
262-784-8701
•
www.spdsystems.com
1542-2CL - Speed Stripper
With Wedge Blade installed,
spare Straight Blade
1542-2CL-1 - Speed Stripper
With Wedge Blade installed,
spare Wedge Blade
1542-2CL-2 - Speed Stripper
With Straight Blade installed,
spare Straight Blade
No bushings are required.
KV Class / Conductor Size
• 5kV / 1000 MCM and smaller
• 15kV / 750 MCM and smaller
• 25kV / 350 MCM and smaller
• 35kV / 3/0 and smaller
For larger cables refer to Mark I,
Mark II and Mark III tools.
1542-2AS - Combination Stripper
With Wedge Blade installed,
spare Straight Blade
1542-2AS-1 - Combination Stripper
With Wedge Blade installed,
spare Wedge Blade
1542-2AS-2 - Combination Stripper
With Straight Blade installed,
spare Straight Blade
www.spdsystems.com
•
262-784-8701 3
Underground • Insulation Removal
Mark Series
Continued
1646X
Underground • Insulation Removal
The adjustable side frames eliminate the need for sizing
bushings or adapters, and are clamped to the cable with
knurled thumb nuts.
1590X
1542 Series Accessories
Speed Systems offers a complete line of replacement blades,
tool stops and accessories.
1646X - Scale Gauge
Measures stripback
1562 - Wedge Blade
(XLP/EPR) (see page 10)
1590X - Small Cable Adapter
For cables 5/16" to ½"
(8.0 - 12.7 mm)
1581 - Straight Blade
Straight Blade (Kerite)
(see page 10)
Split Handle
Optional folding handle
add S to catalog number
(i.e. 1542-2CL-1S)
1678 - Scoring Blade
(see page 10)
2689 - Chamfering Tool/Scale Gauge
(2672 Replacement Chamfering Blade
(see page 10)
A Tool Stop accessory is available to ensure an accurate
square cut every time.
For cables with the semi-con bonded to the insulation,
the AO13 blade is available to shave off the semi-con layer
(see page 10).
Mark I
Split Handle
Mark I
With AO11 Wedge Blade for Cable O.D. Range
3/4" to 2" (19.1 - 50.8 mm) Shown with Tool Stop
Accessory (sold separately)
2689
1581
1650X - Tool Stop
The Mark Series Strippers combine heavy-duty design with
precision components. Heat-treated rollers are angle mounted
for better cable feed and reduced drag on the cable surface
as the tool is rotated.
Mark II
Mark II
With AO11 Wedge Blade for Cable O.D. Range
1-3/4" to 3" (44.5 - 76.2 mm) Shown with Tool Stop
Accessory (sold separately)
1678
Mark II-10
With AO10 Blade for 69kV - 138kV Cables
for Cable O.D. Range 1-3/4" to 3"
(44.5 - 76.2 mm) (not shown)
1562
1650X
Mark III
With AO10 Blade for Cable O.D.
Range 2-3/4" to 4"
(69.9-101.6 mm)
Includes Tool Stop Accessory
AO10 - Large Blade
For 69kV – 138kV cables (only fits
the Mark II-10 and Mark III tools
(see page 10)
AO11
AO13
AO12
AO11 - Wedge Blade
(see page 10)
AO12 - Straight Blade
(see page 10)
AO10
AO13 - Shaving Blade
For bonded semi-con
(see page 10)
Mark III
4
262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 5
Underground • Insulation Removal
Mark Series
Continued
1646X
Underground • Insulation Removal
The adjustable side frames eliminate the need for sizing
bushings or adapters, and are clamped to the cable with
knurled thumb nuts.
1590X
1542 Series Accessories
Speed Systems offers a complete line of replacement blades,
tool stops and accessories.
1646X - Scale Gauge
Measures stripback
1562 - Wedge Blade
(XLP/EPR) (see page 10)
1590X - Small Cable Adapter
For cables 5/16" to ½"
(8.0 - 12.7 mm)
1581 - Straight Blade
Straight Blade (Kerite)
(see page 10)
Split Handle
Optional folding handle
add S to catalog number
(i.e. 1542-2CL-1S)
1678 - Scoring Blade
(see page 10)
2689 - Chamfering Tool/Scale Gauge
(2672 Replacement Chamfering Blade
(see page 10)
A Tool Stop accessory is available to ensure an accurate
square cut every time.
For cables with the semi-con bonded to the insulation,
the AO13 blade is available to shave off the semi-con layer
(see page 10).
Mark I
Split Handle
Mark I
With AO11 Wedge Blade for Cable O.D. Range
3/4" to 2" (19.1 - 50.8 mm) Shown with Tool Stop
Accessory (sold separately)
2689
1581
1650X - Tool Stop
The Mark Series Strippers combine heavy-duty design with
precision components. Heat-treated rollers are angle mounted
for better cable feed and reduced drag on the cable surface
as the tool is rotated.
Mark II
Mark II
With AO11 Wedge Blade for Cable O.D. Range
1-3/4" to 3" (44.5 - 76.2 mm) Shown with Tool Stop
Accessory (sold separately)
1678
Mark II-10
With AO10 Blade for 69kV - 138kV Cables
for Cable O.D. Range 1-3/4" to 3"
(44.5 - 76.2 mm) (not shown)
1562
1650X
Mark III
With AO10 Blade for Cable O.D.
Range 2-3/4" to 4"
(69.9-101.6 mm)
Includes Tool Stop Accessory
AO10 - Large Blade
For 69kV – 138kV cables (only fits
the Mark II-10 and Mark III tools
(see page 10)
AO11
AO13
AO12
AO11 - Wedge Blade
(see page 10)
AO12 - Straight Blade
(see page 10)
AO10
AO13 - Shaving Blade
For bonded semi-con
(see page 10)
Mark III
4
262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 5
Underground • Semi-Con Scoring
1800 Adjustable Blade Series
Continued
Cable O.D. 1-3/4" to 3" (44.5 - 76.2 mm)
The 1800 Series Semi-Con Scorers have adjustable blade depth
(.001" - .100") for scoring (scribing) the semi-conductive shield of
medium voltage cable so the semi-con can be removed without
nicking or damaging the cable insulation.
Underground • Semi-Con Scoring
1700 Adjustable Blade Series
The tool switches between the square and spiral cutting functions
without removing it from the cable. Coil springs maintain constant
pressure during operation.
Cable O.D. 1/2" to 2" (12.7 - 50.8 mm)
The 1700 Series Semi-Con Scorers have adjustable blade depth
(.001" - .100") for scoring (scribing) the semi-conductive shield of
medium voltage cable so the semi-con can be removed without
nicking or damaging the cable insulation.
1700-SS
1800SS - Adjustable Blade Scorer
With square/spiral cut - dial locking set screw (shown)
1800-SS-LC - Adjustable Blade Scorer
With square cut/spiral cut and dial locking
set screw - Saddle relief for close-in cut
The tool switches between the square and spiral cutting functions
without removing it from the cable. Leaf springs maintain constant
pressure during operation.
1701-2 – Fixed Blade Scorer
1700-SS - Adjustable Blade Scorer
With square cut/spiral cut and dial
locking set screw (shown)
1700-SS-LC - Adjustable Blade Scorer
With square cut/spiral cut and dial locking
set screw - Saddle relief for close-in cut
1700-SS-LC
Underground • Semi-Con Scoring
1701 Fixed Blade Series
1701
Cable O.D. 1/2" to 2" (12.7 - 50.8 mm)
The 1701 has a fixed blade depth for scoring (scribing) the semiconductive shield of medium voltage cable so the semi-con can
be removed without nicking or damaging the cable insulation.
1800SS
The tool switches between the square and spiral cutting functions
without removing it from the cable. Leaf springs maintain constant
pressure during operation.
1701 - Fixed Blade Scorer
.023" blade depth
1701-1 – Fixed Blade Scorer
.028" blade depth
Underground • Semi-Con Scoring
1701-2 – Fixed Blade Scorer
.033" blade depth
Consult the factory for other blade depths
Any blade depth from .010" to .095"
is available from the factory
1801 Fixed Blade Series
Cable O.D. 1-3/4" to 3" (44.5 - 76.2 mm)
1678
1678 - Scoring Replacement Blades
All scoring tools (see page 10)
The 1801 has a fixed blade depth for scoring (scribing) the
semi-conductive shield of medium voltage cable so the semi-con
can be removed without nicking or damaging the cable insulation.
The tool switches between the square and spiral cutting functions
without removing it from the cable. Coil springs maintain constant
pressure during operation.
1801 - Fixed Blade Scorer
Specify blade depth Any blade depth from .010" to .095"
is available from the factory
6
262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 7
Underground • Semi-Con Scoring
1800 Adjustable Blade Series
Continued
Cable O.D. 1-3/4" to 3" (44.5 - 76.2 mm)
The 1800 Series Semi-Con Scorers have adjustable blade depth
(.001" - .100") for scoring (scribing) the semi-conductive shield of
medium voltage cable so the semi-con can be removed without
nicking or damaging the cable insulation.
Underground • Semi-Con Scoring
1700 Adjustable Blade Series
The tool switches between the square and spiral cutting functions
without removing it from the cable. Coil springs maintain constant
pressure during operation.
Cable O.D. 1/2" to 2" (12.7 - 50.8 mm)
The 1700 Series Semi-Con Scorers have adjustable blade depth
(.001" - .100") for scoring (scribing) the semi-conductive shield of
medium voltage cable so the semi-con can be removed without
nicking or damaging the cable insulation.
1700-SS
1800-SS-LC - Adjustable Blade Scorer
With square cut/spiral cut and dial locking
set screw - Saddle relief for close-in cut
The tool switches between the square and spiral cutting functions
without removing it from the cable. Leaf springs maintain constant
pressure during operation.
1700-SS - Adjustable Blade Scorer
With square cut/spiral cut and dial
locking set screw (shown)
1700-SS-LC - Adjustable Blade Scorer
With square cut/spiral cut and dial locking
set screw - Saddle relief for close-in cut
1800SS - Adjustable Blade Scorer
With square/spiral cut - dial locking set screw (shown)
1800SS
Underground • Semi-Con Scoring
1801 Fixed Blade Series
Cable O.D. 1-3/4" to 3" (44.5 - 76.2 mm)
1700-SS-LC
The 1801 has a fixed blade depth for scoring (scribing) the semi-conductive
shield of medium voltage cable so the semi-con can be removed without nicking
or damaging the cable insulation.
Underground • Semi-Con Scoring
The tool switches between the square and spiral cutting functions without removing
it from the cable. Coil springs maintain constant pressure during operation.
1701 Fixed Blade Series
1701
Cable O.D. 1/2" to 2" (12.7 - 50.8 mm)
The 1701 has a fixed blade depth for scoring (scribing) the semiconductive shield of medium voltage cable so the semi-con can
be removed without nicking or damaging the cable insulation.
1801 - Fixed Blade Scorer
Specify blade depth Any blade depth from .010" to .095"
is available from the factory
The tool switches between the square and spiral cutting functions
without removing it from the cable. Leaf springs maintain constant
pressure during operation.
1701 - Fixed Blade Scorer
.023" blade depth
1701-1 – Fixed Blade Scorer
.028" blade depth
1701-2 – Fixed Blade Scorer
.033" blade depth
Consult the factory for other blade depths
Any blade depth from .010" to .095"
is available from the factory
1678
1678 - Scoring Replacement Blades
All scoring tools (see page 10)
6
262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 7
Secondary
Continued
CT-1
Underground • Chamfering Tools
CT Series
Cuts
insulation
45˚
Chamfering Tools cut a 45 degree bevel on the cable insulation
to ease installation into molded rubber components.
End Strip
2750
Cable OD .31” to 1.375” (7.9 - 33.3 mm)
The Model 2750 Secondary Cable Stripper is designed to end-strip
600V cable. The tool is adjustable and strips #4 through 1000 MCM
cable with 45 mil through 110 mil insulation thickness with no
bushings required. It has an unlimited strip length.
The CT Series tools are adjustable, with no bushings or adapters required.
The 2689 Chamfering Tool/Scale Gauge fits the 1542 Series Strippers
to provide both scale gauge and chamfering capabilities.
2750
2750 - Secondary Stripper
CT-1 - Chamfering Tool
For ½" to 1-3/8" cables
(12.7 - 34.9 mm)
2672 - Replacement Blade
(see page 10)
2781 - Replacement Blade
(see page 10)
CT-2 – Chamfering Tool
For 1-1/4" to 2-3/4" cables
(31.8 - 69.9 mm)
End and Mid Span Strip
2689 - Chamfering Tool/Scale Gauge
(not shown - see page 10)
2850
Cable OD .31" to 1.375" (7.9 - 33.3 mm)
CT-2
The Model 2850 Secondary Cable Stripper is designed to both
end-strip and mid-span strip 600V cable. The tool is adjustable
and strips #4 through 1000 MCM cable with 45 mil through
110 mil insulation thickness with no bushings required.
It has an unlimited strip length.
2850 - Secondary Mid-Span Stripper
2850S – Secondary Mid-Span Stripper
Cable OD .31" to .72" (7.9 - 18.3 mm)
Short Version for use in cable spacer
or with limited workspace
Aerial Tree Wire and Spacer Cable
2900 Series
2787 - Replacement Blade
(see page 10)
2850
The Model 2900 Aerial Tree Wire and Spacer Cable Stripper performs
both end strip and mid-span strips on 5kV through 35kV Aerial Tree Wire
and Spacer Cables.
The tool is fully adjustable and requires no bushings. The blade adjusts
for insulation up to 300 mils thick and is field replaceable.
2900
The 2900 Series Aerial Tree Wire and Spacer Cable Strippers allow
unlimited strip length.
2900 - Aerial Tree Wire/Spacer Cable
Insulation Stripper
(includes both long and short handles)
2900 Lite - Aerial Tree Wire/Spacer Cable
Lite version of Model 2900 –
weighs over two pounds less
than the standard 2900
(includes short handles only) (not shown)
2872 - Replacement Blade
(see page 10)
8
262-784-8701
•
www.spdsystems.com
2850S
www.spdsystems.com
•
262-784-8701 9
Secondary
Continued
CT-1
Underground • Chamfering Tools
CT Series
Cuts
insulation
45˚
Chamfering Tools cut a 45 degree bevel on the cable insulation
to ease installation into molded rubber components.
End Strip
2750
Cable OD .31” to 1.375” (7.9 - 33.3 mm)
The Model 2750 Secondary Cable Stripper is designed to end-strip
600V cable. The tool is adjustable and strips #4 through 1000 MCM
cable with 45 mil through 110 mil insulation thickness with no
bushings required. It has an unlimited strip length.
The CT Series tools are adjustable, with no bushings or adapters required.
The 2689 Chamfering Tool/Scale Gauge fits the 1542 Series Strippers
to provide both scale gauge and chamfering capabilities.
2750
2750 - Secondary Stripper
CT-1 - Chamfering Tool
For ½" to 1-3/8" cables
(12.7 - 34.9 mm)
2672 - Replacement Blade
(see page 10)
2781 - Replacement Blade
(see page 10)
CT-2 – Chamfering Tool
For 1-1/4" to 2-3/4" cables
(31.8 - 69.9 mm)
End and Mid Span Strip
2689 - Chamfering Tool/Scale Gauge
(not shown - see page 10)
2850
Cable OD .31" to 1.375" (7.9 - 33.3 mm)
CT-2
The Model 2850 Secondary Cable Stripper is designed to both
end-strip and mid-span strip 600V cable. The tool is adjustable
and strips #4 through 1000 MCM cable with 45 mil through
110 mil insulation thickness with no bushings required.
It has an unlimited strip length.
2850 - Secondary Mid-Span Stripper
2850S – Secondary Mid-Span Stripper
Cable OD .31" to .72" (7.9 - 18.3 mm)
Short Version for use in cable spacer
or with limited workspace
Aerial Tree Wire and Spacer Cable
2900 Series
2787 - Replacement Blade
(see page 10)
2850
The Model 2900 Aerial Tree Wire and Spacer Cable Stripper performs
both end strip and mid-span strips on 5kV through 35kV Aerial Tree Wire
and Spacer Cables.
The tool is fully adjustable and requires no bushings. The blade adjusts
for insulation up to 300 mils thick and is field replaceable.
2900
The 2900 Series Aerial Tree Wire and Spacer Cable Strippers allow
unlimited strip length.
2900 - Aerial Tree Wire/Spacer Cable
Insulation Stripper
(includes both long and short handles)
2900 Lite - Aerial Tree Wire/Spacer Cable
Lite version of Model 2900 –
weighs over two pounds less
than the standard 2900
(includes short handles only) (not shown)
2872 - Replacement Blade
(see page 10)
8
262-784-8701
•
www.spdsystems.com
2850S
www.spdsystems.com
•
262-784-8701 9
Blades
Torque
1542 Series Blades
Tools
Aerial Tree Wire/Spacer Cable Blade
1562 Wedge Blade
The 1562 Wedge Blade has a small foot at the bottom of the
blade to assist in lifting the insulation away from the conductor as
you strip the cable. The 1562 Wedge Blade is the correct choice
for almost all applications. We normally recommend using the
Straight Blade only if the Wedge Blade is unable to strip your
specific cable. This is typically only true when stripping extremely
soft EPR insulated cables. Virtually all XLP and most EPR cables
can be stripped using the 1562 Wedge Blade.
The 2872 Blade is used on all versions of the Model 2900
Aerial Tree Wire and Spacer Cable Stripper.
BIT/E180 Series
2872
BIT/E180AT
Bushing Insert Tool with Torque Limiter
and T-Handle 5/16" hex shaft
1678 Scoring Blade
BIT/E180AH
BIT/E180AH
Bushing Insert Tool with
Torque Limiter and Operating
Eye 5/16" hex shaft
1678 Scoring Blade is used on all
Speed Systems Semi-Con
mi-Con Scorers
and the semi-con scorer
corer of the
1542-2AS.
1581
1678
BIT/TK Series
Mark Series Stripping Blades
AO10 Large Blade
Only used on the Mark II-10 and Mark III strippers.
It is designed to strip 69kV to 138kV cables. It has a larger web than the
standard AO11 blade to provide additional strength when stripping the
thicker insulation of those cables.
AO11 Wedge Blade
Has a small foot at the bottom of the blade to assist in lifting the insulation
away from the conductor as you strip the cable. The AO11 Wedge Blade
is the correct choice for almost all applications. We normally recommend
using the Straight Blade only if the Wedge Blade is unable to strip your
specific cable. This is typically only true when stripping extremely soft EPR
insulated cables. Virtually all XLP and most EPR cables can be stripped
using the AO11 Wedge Blade.
AO12 Straight Blade
Typically only required when stripping very soft EPR
(Kerite brand) insulated cables.
The Bushing Insert Tool is designed to provide operating personnel
with an effective and reliable means of installation and removal of
bushing inserts. The tool has a nut to allow use of a wrench for
removing bushing inserts.
2672 Chamfering Blade
The -N version is for use on non-loadbreak bushings only.
2672 Chamfering Blade is used
sed in the
CT-1, CT-2 and 2689 to cut a small
bevel on the edge of the insulation
ulation
to ease insertion into molded
d
rubber components.
BIT/TK120X-Q
BIT/TK120X-Q
Bushing Insert Tool with Torque Limiter
Bushing Insert with Tor-Key
Fits loadbreak bushing inserts (shown)
BIT/TK120X-N
BIT/TK120X-N - Bushing Insert Tool with TorKey
Fits deadbreak bushing inserts (not shown)
2672
TK120S
Replacement torque limiter
Secondary Stripping Blades
AO13 Semi-Con Shaving Blade
Fits on all of the Mark Series Strippers. It is used to shave
off the semi-conductive layer on those cables with bonded semi-con.
Some sanding is likely necessary after sha
shaving bonded semi-con.
2781 Blade
The 2781 Blade is used in the 2750 Adjustable
Secondary End Stripper
Bushing Insert Tools - 600A
LRTP/TK240AT
LRTP Series
2787 Blade
The 2787 Blade is used in the 2850 Adjustable
Secondary End and Mid-Span Secondary Stripper
AO11
1013
BIT/E180AT
The BIT/E180 Series Bushing Insert Tool provides preset torque for
installation and removal of bushing inserts with a 5/16" internal hex
socket. Available in both T-Handle (AT) and OP eye (AH) versions.
The torque limiter locks while reversing to allow the tool to be used
to remove bushing inserts.
1581 Straight Blade
The 1581 Straight Blade is typically only required when
stripping very soft EPR (Kerite brand) insulated cables.
1562
1
Bushing Insert Tools - 200A
The LRTP Series Bushing Insert Tool provides preset torque for
installation and removal of 600A reducing tap plug bushings
with a 5/16" and/or 3/8” internal hex socket requiring 20 ft-lbs
of torque. The torque limiter locks when reversing, allowing
the tool to be used for bushing removal.
2781
AO10
A
LRTP/TK240AH
2787
AO12
10 262-784-8701
•
www.spdsystems.com
LRTP/TK240AT
Bushing Insert Tool for 600A LRTP with
T-Handle and 240 in-lb torque limiter
LRTP/TK240AH
Bushing Insert Tool for 600A LRTP with
op eye and 240 in-lb torque limiter
www.spdsystems.com
•
262-784-8701 11
Blades
Torque
1542 Series Blades
Tools
Aerial Tree Wire/Spacer Cable Blade
1562 Wedge Blade
The 1562 Wedge Blade has a small foot at the bottom of the
blade to assist in lifting the insulation away from the conductor as
you strip the cable. The 1562 Wedge Blade is the correct choice
for almost all applications. We normally recommend using the
Straight Blade only if the Wedge Blade is unable to strip your
specific cable. This is typically only true when stripping extremely
soft EPR insulated cables. Virtually all XLP and most EPR cables
can be stripped using the 1562 Wedge Blade.
The 2872 Blade is used on all versions of the Model 2900
Aerial Tree Wire and Spacer Cable Stripper.
BIT/E180 Series
2872
BIT/E180AT
Bushing Insert Tool with Torque Limiter
and T-Handle 5/16" hex shaft
1678 Scoring Blade
BIT/E180AH
BIT/E180AH
Bushing Insert Tool with
Torque Limiter and Operating
Eye 5/16" hex shaft
1678 Scoring Blade is used on all
Speed Systems Semi-Con
mi-Con Scorers
and the semi-con scorer
corer of the
1542-2AS.
1581
1678
BIT/TK Series
Mark Series Stripping Blades
AO10 Large Blade
Only used on the Mark II-10 and Mark III strippers.
It is designed to strip 69kV to 138kV cables. It has a larger web than the
standard AO11 blade to provide additional strength when stripping the
thicker insulation of those cables
AO11 Wedge Blade
Has a small foot at the bottom of the blade to assist in lifting the insulation
away from the conductor as you strip the cable. The AO11 Wedge Blade
is the correct choice for almost all applications*. We normally recommend
using the Straight Blade only if the Wedge Blade is unable to strip your
specific cable. This is typically only true when stripping extremely soft EPR
insulated cables. Virtually all XLP and most EPR cables can be stripped
using the AO11 Wedge Blade
AO12 Straight Blade
Typically only required when stripping very soft EPR
(Kerite brand) insulated cables.
The Bushing Insert Tool is designed to provide operating personnel
with an effective and reliable means of installation and removal of
bushing inserts. The tool has a nut to allow use of a wrench for
removing bushing inserts.
2672 Chamfering Blade
The -N version is for use on non-loadbreak bushings only.
2672 Chamfering Blade is used
sed in the
CT-1, CT-2 and 2689 to cut a small
bevel on the edge of the insulation
ulation
to ease insertion into molded
d
rubber components.
BIT/TK120X-Q
BIT/TK120X-Q
Bushing Insert Tool with Torque Limiter
Bushing Insert with Tor-Key
Fits loadbreak bushing inserts (shown)
BIT/TK120X-N
BIT/TK120X-N - Bushing Insert Tool with TorKey
Fits deadbreak bushing inserts (not shown)
2672
TK120S
Replacement torque limiter
Secondary Stripping Blades
AO13 Semi-Con Shaving Blade
Fits on all of the Mark Series Strippers. It is used to shave
off the semi-conductive layer on those cables with bonded semi-con.
Some sanding is likely necessary after sha
shaving bonded semi-con
2781 Blade
The 2781 Blade is used in the 2750 Adjustable
Secondary End Stripper
Bushing Insert Tools - 600A
LRTP/TK240AT
LRTP Series
2787 Blade
The 2787 Blade is used in the 2850 Adjustable
Secondary End and Mid-Span Secondary Stripper
AO11
1013
BIT/E180AT
The BIT/E180 Series Bushing Insert Tool provides preset torque for
installation and removal of bushing inserts with a 5/16" internal hex
socket. Available in both T-Handle (AT) and OP eye (AH) versions.
The torque limiter locks while reversing to allow the tool to be used
to remove bushing inserts.
1581 Straight Blade
The 1581 Straight Blade is typically only required when
stripping very soft EPR (Kerite brand) insulated cables
1562
1
Bushing Insert Tools - 200A
The LRTP Series Bushing Insert Tool provides preset torque for
installation and removal of 600A reducing tap plug bushings
with a 5/16" and/or 3/8” internal hex socket requiring 20 ft-lbs
of torque. The torque limiter locks when reversing, allowing
the tool to be used for bushing removal.
2781
AO10
A
LRTP/TK240AH
2787
AO12
10 262-784-8701
•
www.spdsystems.com
LRTP/TK240AT
Bushing Insert Tool for 600A LRTP with
T-Handle and 240 in-lb torque limiter
LRTP/TK240AH
Bushing Insert Tool for 600A LRTP with
op eye and 240 in-lb torque limiter
www.spdsystems.com
•
262-784-8701 11
Loadbreak Probe Tools
TorqueContinued
LPW1525 Series
The LPW1525/TK120X and LPW-1525/TK120X-N Combination
Loadbreak Probe Wrench provide a means of preventing probe arc
follower contamination and other damage when installing the probe
into a loadbreak elbow. The tool holds the loadbreak probe for
positioning into the threaded eye of the elbow crimp connector.
Tools
LRTP/TK55 Series
The LRTP Series Bushing Insert Tool provides preset torque for
installation and removal of 600A reducing tap plug bushings with a
5/16" and/or 3/8” internal hex socket requiring 50 to 60 ft-lbs of
torque. Can also be used for bushing removal.
LPW1525/TK120X-N
The torque limiter is preset and is rotated until the Tor-Key clicks,
indicating that the preset torque has been reached.
The LPW1525/TK120X-N adds a neutral winding groove and
cross hole option to reduce neutral wire breakage when splitting
the outer jacket.
LRTP/TK55
LRTP/TK55H
The LPW1525 Loadbreak Probe Wrench is a standalone probe
wrench with a ¼” square drive for use with the TK-120 Tor-Key.
LRTP/TK55
Bushing Insert Tool for 600A LRTP with
55 ft-lb torque limiter and 1/2" drive
The LPW1525 Series tools fit all 15kV and 25kV elbows and
Elastimold 35kV elbows
LRTP/TK55H
Bushing Insert Tool for 600A LRTP
with 55 ft-lb torque limiter and OP Eye
LPW1525/TK120X-N
Combination Tool with Neutral Winder
LPW1525/TK120X
Combination Tool
TPH-1 Tap Plug Holder
LPW1525
Probe Wrench only for use with
1/4" square drive
The TPH-1 600A Tap Plug Holder provides a means of
holding a 600A component in position on the torqueing
tool shaft when installing or removing the component
in hard to reach locations.
LPW1525/TK120X
TK120
TK120
Torque limiter with
1/4" square drive
TK120S
Replacement torque limiter
with 3/8" round stub
(not shown)
LPW1525
LPW35R Series
The LRTP shaft fits through the TPH-1 and into the insert
to hold the insert snugly when installing the component
in a vertical position.
TPH-1 – Tap Plug Holder
600A Accessories
The LRTP-12 provides for installation and removal of 600A
reducing tap plug bushings with a 5/16" internal hex socket.
The LRTP-12 requires a separate torque wrench.
The LPW35R/TK120X and LPW-35R/TK120X-N Combination
Loadbreak Probe Wrench provide a means of preventing
probe arc follower contamination and other damage when
installing the probe into a loadbreak elbow. The tool holds
the loadbreak probe for positioning into the threaded eye of
the elbow crimp connector. The torque limiter is preset torque
and is rotated until the Tor-Key clicks, indicating that the
preset torque has been reached.
The LPW35R/TK120X-N adds a neutral winding groove
and cross hole option to reduce neutral wire breakage when
splittingthe outer jacket.
The TW516-13 and W516-13 provides a 5/16" hex shaft available
with or without T-Handle for installing T-OP II components.
The LPW35R Series tools only fit Eaton (Cooper/RTE)
and Hubbell (Chardon) 35kV elbows.
LRTP-12
Shaft only with 1/2" drive
TW516-13
T-Wrench with 5/16" shaft and T-Handle
LPW35R/TK120X-N
Combination Tool with Neutral Winder
W516-13
5/16" shaft with 3/8" drive
(not shown)
LPW35R/TK120X
Combination Tool
TW516-13
LRTP-12
LPW35R/TK120X
LPW35R/TK120X-N
TK120S
Replacement torque limiter
with 3/8" round stub
(not shown)
DPW1525 - Deadbreak Probe Tool
The DPW1525 provides a means for installing deadbreak
elbow probes. The tool features a built-in, pre-set torque
limiter that provides consistency of probe tightness.
DPW-1525
DPW-1525
Deadbreak Probe Wrench
12 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 13
Loadbreak Probe Tools
TorqueContinued
LPW1525 Series
The LPW1525/TK120X and LPW-1525/TK120X-N Combination
Loadbreak Probe Wrench provide a means of preventing probe arc
follower contamination and other damage when installing the probe
into a loadbreak elbow. The tool holds the loadbreak probe for
positioning into the threaded eye of the elbow crimp connector.
Tools
LRTP/TK55 Series
The LRTP Series Bushing Insert Tool provides preset torque for
installation and removal of 600A reducing tap plug bushings with a
5/16" and/or 3/8” internal hex socket requiring 50 to 60 ft-lbs of
torque. Can also be used for bushing removal.
LPW1525/TK120X-N
The torque limiter is preset and is rotated until the Tor-Key clicks,
indicating that the preset torque has been reached.
The LPW1525/TK120X-N adds a neutral winding groove and
cross hole option to reduce neutral wire breakage when splitting
the outer jacket.
LRTP/TK55
LRTP/TK55H
The LPW1525 Loadbreak Probe Wrench is a standalone probe
wrench with a ¼” square drive for use with the TK-120 Tor-Key.
LRTP/TK55
Bushing Insert Tool for 600A LRTP with
55 ft-lb torque limiter and 1/2" drive
The LPW1525 Series tools fit all 15kV and 25kV elbows and
Elastimold 35kV elbows.
LRTP/TK55H
Bushing Insert Tool for 600A LRTP
with 55 ft-lb torque limiter and OP Eye
LPW1525/TK120X-N
Combination Tool with Neutral Winder
LPW1525/TK120X
Combination Tool
TPH-1 Tap Plug Holder
LPW1525
Probe Wrench only for use with
1/4" square drive
The TPH-1 600A Tap Plug Holder provides a means of
holding a 600A component in position on the torqueing
tool shaft when installing or removing the component
in hard to reach locations.
LPW1525/TK120X
TK120
TK120
Torque limiter with
1/4" square drive
TK120S
Replacement torque limiter
with 3/8" round stub
(not shown)
LPW1525
LPW35R Series
The LRTP shaft fits through the TPH-1 and into the insert
to hold the insert snugly when installing the component
in a vertical position.
TPH-1 – Tap Plug Holder
600A Accessories
The LRTP-12 provides for installation and removal of 600A
reducing tap plug bushings with a 5/16" internal hex socket.
The LRTP-12 requires a separate torque wrench.
The LPW35R/TK120X and LPW-35R/TK120X-N Combination
Loadbreak Probe Wrench provide a means of preventing
probe arc follower contamination and other damage when
installing the probe into a loadbreak elbow. The tool holds
the loadbreak probe for positioning into the threaded eye of
the elbow crimp connector. The torque limiter is preset torque
and is rotated until the Tor-Key clicks, indicating that the
preset torque has been reached.
The LPW35R/TK120X-N adds a neutral winding groove
and cross hole option to reduce neutral wire breakage when
splittingthe outer jacket.
The TW516-13 and W516-13 provides a 5/16" hex shaft available
with or without T-Handle for installing T-OP II components.
The LPW35R Series tools only fit Eaton (Cooper/RTE)
and Hubbell (Chardon) 35kV elbows.
LRTP-12
Shaft only with 1/2" drive
TW516-13
T-Wrench with 5/16" shaft and T-Handle
LPW35R/TK120X-N
Combination Tool with Neutral Winder
W516-13
5/16" shaft with 3/8" drive
(not shown)
LPW35R/TK120X
Combination Tool
TW516-13
LRTP-12
LPW35R/TK120X
LPW35R/TK120X-N
TK120S
Replacement torque limiter
with 3/8" round stub
(not shown)
DPW1525 - Deadbreak Probe Tool
The DPW1525 provides a means for installing deadbreak
elbow probes. The tool features a built-in, pre-set torque
limiter that provides consistency of probe tightness.
DPW-1525
DPW-1525
Deadbreak Probe Wrench
12 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 13
CJT
Component
Installation
The Speed Systems Cable Joint Housing Assembly/Disassembly
Disassembly Tool is
designed to assist in the assembly and disassembly of 15KV and 25KV
600 Amp deadfront cable joints onto high voltage underground
derground cable.
& Removal Tools
CJT
Cable Joint Housing
Assembly/Disassembly Tool
TAT – T-Body and Cable Adapter Tool
The TAT is designed to assist in the installation of 15 kV, 25 kV and
35 kV 600 Amp cable adapters and T-Bodies onto high voltage
underground cable for deadfront apparatus. The tool includes a
combination 3/4"/3/8" hex drive. The clamp fits #2 through
1000MCM cable (0.75” – 2.42”).
The TAT is drill operable to provide a significant ergonomic benefit.
The tool has a 7-1/8” stroke and moves one inch with just two
revolutions of the driver.
CJT
TAT
TAT
Cable Adapter and T-Body Installation Tool
(includes carrying bag)
CLEER
SAT
The CLEER tool provides a means of freeing the Eaton/Cooper
Power Systems Clēēr™ 600A loadbreak components prior to
breaking electrical contact.
The SAT Splice Assembly Tool is designed to ease installation
and assembly of 15 kV, 25 kV and 35 kV molded rubber splice
components. The tool includes a combination 3/4"/3/8" hex drive.
The clamp fits #2 through 1000MCM cable (0.75" – 2.42").
The tool is sized to fit between the C connector’s legs and
provides
ovides 3/4" of stroke to break the seal
eal without breaking the
t
electrical
ctrical
trical contact.
c t t
The arms grip splice sleeves from 1-1/2" through 3-3/8" OD.
The SAT is drill operable to provide a significant ergonomic benefit.
The tool has a 15" stroke and moves one inch with just two
revolutions of the driver.
CLEER
SAT
SAT
Splice Assembly Tool
(includes carrying bag)
TAT/SAT
The TAT/SAT Combination Tool combines the features of the SAT
Splice Assembly Tool and the TAT T-Body/Cable Adapter Tool.
The tool includes a combination 3/4"/3/8" hex drive. The clamp
fits #2 through 1000MCM cable (0.75" – 2.42").
The arms grip splice sleeves from 1-1/2" through 3-3/8" OD.
The TAT/SAT is drill operable to provide a significant ergonomic
benefit. The tool has a 15" stroke and moves one inch with
just two revolutions of the driver.
TAT/SAT
Combination Splice/T-Body Tool
(includes carrying bag)
3155 Cable Adapter Stop Accessory
3155
TAT/SAT
A Cable Adapter Stop Accessory Model 3155 is available to
prevent the cable adapter from being forced further down the
cable as the T-Body is installed. It is available separately (3155)
or installed on the TAT or TAT/SAT by adding a -S to the part
number (i.e. TAT-S).
14 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 15
CJT
Component
Installation
The Speed Systems Cable Joint Housing Assembly/Disassembly
Disassembly Tool is
designed to assist in the assembly and disassembly of 15KV and 25KV
600 Amp deadfront cable joints onto high voltage underground
derground cable.
& Removal Tools
CJT
Cable Joint Housing
Assembly/Disassembly Tool
TAT – T-Body and Cable Adapter Tool
The TAT is designed to assist in the installation of 15 kV, 25 kV and
35 kV 600 Amp cable adapters and T-Bodies onto high voltage
underground cable for deadfront apparatus. The tool includes a
combination 3/4"/3/8" hex drive. The clamp fits #2 through
1000MCM cable (0.75” – 2.42”).
The TAT is drill operable to provide a significant ergonomic benefit.
The tool has a 7-1/8” stroke and moves one inch with just two
revolutions of the driver.
CJT
TAT
A Cable Adapter Stop Accessory is available to prevent
the cable adapter from being forced further down the cable
as the T-Body is installed.
CLEER
TAT
Cable Adapter and T-Body Installation Tool
(includes carrying bag)
The CLEER tool provides a means of freeing the Eaton/Cooper
Power Systems Clēēr™ 600A loadbreak components prior to
breaking electrical contact.
SAT
The tool is sized to fit between the C connector’s legs and
provides
ovides 3/4" of stroke to break the seal
eal without breaking the
t
electrical
ctrical
trical contact.
c t t
The SAT Splice Assembly Tool is designed to ease installation
and assembly of 15 kV, 25 kV and 35 kV molded rubber splice
components. The tool includes a combination 3/4"/3/8" hex drive.
The clamp fits #2 through 1000MCM cable (0.75" – 2.42").
The arms grip splice sleeves from 1-1/2" through 3-3/8" OD.
CLEER
SAT
The SAT is drill operable to provide a significant ergonomic benefit.
The tool has a 15" stroke and moves one inch with just two
revolutions of the driver.
SAT
Splice Assembly Tool
(includes carrying bag)
TAT/SAT
The TAT/SAT Combination Tool combines the features of the SAT
Splice Assembly Tool and the TAT T-Body/Cable Adapter Tool.
The tool includes a combination 3/4"/3/8" hex drive. The clamp
fits #2 through 1000MCM cable (0.75" – 2.42").
The arms grip splice sleeves from 1-1/2" through 3-3/8" OD.
The TAT/SAT is drill operable to provide a significant ergonomic
benefit. The tool has a 15" stroke and moves one inch with
just two revolutions of the driver.
A Cable Adapter Stop Accessory is available to prevent the
cable adapter from being forced further down the cable
as the T-Body is installed.
TAT/SAT
Cable Adapter
Stop Accessory
TAT/SAT
Combination Splice/T-Body Tool
(includes carrying bag)
14 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 15
Elbow & Cap
Isolated
Pulling Tools
Accessories
Ratcheting Box Wrenches
PT-1525
RBW-QUAD1
(U.S. Patent Number(s): US 6,922,888 B2)
The PT-1525 Elbow/Cap Pulling Tool is designed to assist in the
removal of seized elbows and protective caps. The tool is used
with a standard shotgun stick. The PT-1525 fits all 15kV and 25kV
elbows and caps and Elastimold 35kV elbows and caps.
RBW-QUAD1
The RBW-QUAD1 – Isolated Ratcheting Box Wrench includes
1/2", 9/16", 5/8" and 3/4" 12-point ratcheting box wrenches
on Speed Systems’ patented isolated handle.
The RBW-QUAD1 is rated for 1000V.
The PT-1525’s lever action provides a significant mechanical
advantage over other means of pulling elbows and caps.
RBW-QUAD1
1/2", 9/16", 5/8" and 3/4" ratcheting box wrench
PT 1525
The tool includes a high-dielectric rope and a carrying bag.
The PT-TXS is a shorter version of the PT-TX adapter
for use pulling elbows on 600A T-Bodies.
Dogbone Wrenches
(U.S. Patent Number(s): US D492,556 S)
PT 1525
Elbow/Cap Pulling Tool
Speed Systems' Ratcheting Box Wrenches are designed
to provide end to end isolation for maximum safety.
The RBW wrenches have a center "window" displaying
the separation of the tool ends and are rated for 1000V.
The wrenches are available with a variety of end options.
PT-TXS
T-Body Bridge only
PT-35
PT-TXS
(U.S. Patent Number(s): US 6,922,888 B2)
Consult the factory for configurations other than those shown.
RBW-51638
5/16" x 3/8" box wrenches
RBW-11161516
11/16" x 15/16" box wrenches
RBW-38716
3/8" x 7/16" box wrenches
RBW-3478
3/4" x 7/8" box wrenches
RBW-3812
3/8" x 1/2" box wrenches
RBW-341516
3/4" x 15/16" box wrenches
The tool includes a high-dielectric rope and a carrying bag.
RBW-38916
3/8" x 9/16" box wrenches
RBW-131678
13/16" x 7/8" box wrenches
The PT-is available in several configurations with reversible
channels and multi-hole adjuster bars for use with the
PT-TX 600A T-Body Bridge or 3133 PUSH-OP Adapter.
RBW-12916
1/2" x 9/16" box wrenches
RBW-13161516
13/16" x 15/16" box wrenches
RBW-1258
1/2" x 5/8" box wrenches
RBW-781516
7/8" x 15/16" box wrenches
The PT-35 Elbow/Cap Pulling Tool is designed to assist in the
removal of seized elbows and protective caps. The tool fits a
standard shotgun stick. The PT-35 fits Eaton (Cooper/RTE)
and Hubbell (Chardon) 35kV elbows and caps.
The PT-35’s lever action provides a significant mechanical
advantage over other means of pulling elbows and caps.
PT 35
Elbow/Cap Pulling Tool
with standard channel
and adjuster bar (shown)
PT-35RTX
Elbow and Cap Pulling Tool
With Reversible Channel/Multi-Hole
Adjustor Bar and Bridge for use
on 600 Amp T-Body (not shown)
PT-35TX
Elbow and Cap Pulling Tool
With Standard Channel/Multi-Hole
Adjustor Bar and Bridge for use
on 600 Amp T-Body
PT -TX
PT-TX
T-Body Bridge only
PT-35B
Elbow and Cap Pulling Tool With
Standard Channel/Multi-Hole Adjustor
Bar and 3133 PUSH-OP Adaptor
PT 35
RBW-1234
1/2" x 3/4" box wrenches
RBW-91658
9/16" x 5/8" box wrenches
RBW-91634
9/16" x 3/4" box wrenches
3133
Adapter for PUSH-OP
applications
RBW-5834
5/8" x 3/4" box wrenches
3133
RBW-12916
RBW-581316
5/8" x 13/16" box wrenches
RBW-11161316
11/16" x 13/16" box wrenches
16 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 17
Elbow & Cap
Isolated
Pulling Tools
Accessories
Ratcheting Box Wrenches
PT-1525
RBW-QUAD1
(U.S. Patent Number(s): US 6,922,888 B2)
The PT-1525 Elbow/Cap Pulling Tool is designed to assist in the
removal of seized elbows and protective caps. The tool is used
with a standard shotgun stick. The PT-1525 fits all 15kV and 25kV
elbows and caps and Elastimold 35kV elbows and caps.
RBW-QUAD1
The RBW-QUAD1 – Isolated Ratcheting Box Wrench includes
1/2", 9/16", 5/8" and 3/4" 12-point ratcheting box wrenches
on Speed Systems’ patented isolated handle.
The RBW-QUAD1 is rated for 1000V.
The PT-1525’s lever action provides a significant mechanical
advantage over other means of pulling elbows and caps.
RBW-QUAD1
1/2", 9/16", 5/8" and 3/4" ratcheting box wrench
PT 1525
The tool includes a high-dielectric rope and a carrying bag.
The PT-TXS is a shorter version of the PT-TX adapter
for use pulling elbows on 600A T-Bodies.
Dogbone Wrenches
(U.S. Patent Number(s): US D492,556 S)
PT 1525
Elbow/Cap Pulling Tool
Speed Systems' Ratcheting Box Wrenches are designed
to provide end to end isolation for maximum safety.
The RBW wrenches have a center "window" displaying
the separation of the tool ends and are rated for 1000V.
The wrenches are available with a variety of end options.
PT-TXS
T-Body Adapter Assembly only
PT-35
Consult the factory for configurations other than those shown.
(U.S. Patent Number(s): US 6,922,888 B2)
The PT-35 Elbow/Cap Pulling Tool is designed to assist in the
removal of seized elbows and protective caps. The tool fits a
standard shotgun stick. The PT-35 fits Eaton (Cooper/RTE)
and Hubbell (Chardon) 35kV elbows and caps.
PT-TXS
The PT-35’s lever action provides a significant mechanical
advantage over other means of pulling elbows and caps.
The tool includes a high-dielectric rope and a carrying bag.
The PT-is available in several configurations with reversible
channels and multi-hole adjuster bars for use with the
PT-TX 600A T-Body Adapter or 3133 PUSH-OP Adapter.
PT 35
Elbow/Cap Pulling Tool
with standard channel
and adjuster bar (shown)
PT-35RTX
Elbow and Cap Pulling Tool
With Reversible Channel/Multi-Hole
Adjustor Bar and Adapter for use
on 600 Amp T-Body (not shown)
PT-35TX
Elbow and Cap Pulling Tool
With Standard Channel/Multi-Hole
Adjustor Bar and Adapter for use
on 600 Amp T-Body
PT 35
3133
PT-TX
Adapter for 600 Amp T-Body
•
PT-35B
Elbow and Cap Pulling Tool With Standard
Channel/Multi-Hole Adjustor
or Bar and
3133 Bridge for use in PUSH-OP
SH-OP
applications
RBW-38716
3/8" x 7/16" box wrenches
RBW-3478
3/4" x 7/8" box wrenches
RBW-3812
3/8" x 1/2" box wrenches
RBW-341516
3/4" x 15/16" box wrenches
RBW-38916
3/8" x 9/16" box wrenches
RBW-131678
13/16" x 7/8" box wrenches
RBW-12916
1/2" x 9/16" box wrenches
RBW-13161516
13/16" x 15/16" box wrenches
RBW-1258
1/2" x 5/8" box wrenches
RBW-781516
7/8" x 15/16" box wrenches
RBW-91658
9/16" x 5/8" box wrenches
RBW-91634
9/16" x 3/4" box wrenches
3133
Adapter for PUSH-OP
applications
www.spdsystems.com
RBW-11161516
11/16" x 15/16" box wrenches
RBW-1234
1/2" x 3/4" box wrenches
RBW-5834
5/8" x 3/4" box wrenches
RBW-12916
RBW-581316
5/8" x 13/16" box wrenches
PT -TX
16 262-784-8701
RBW-51638
5/16" x 3/8" box wrenches
RBW-11161316
11/16" x 13/16" box wrenches
www.spdsystems.com
•
262-784-8701 17
Isolated
Accessories
RBW-3
Hex Wrenches
RBW-51638RP
RBW-1
Ratcheting Box Wrench
Wrench – 5/16" or 3/8" Hex Shaft
(U.S. Patent Number(s): US D492,556 S)
Speed Systems' Ratcheting Box Wrenches are designed to
provide end to end isolation for maximum safety. The RBW
wrenches have a center "window" displaying the separation
of the tool ends and are rated for 1000V. The wrenches are
available with a variety of end options.
Consult the factory for configurations other than those shown.
Alternate Shaft Lengths
(RBW-1, RBW-1P, RBW-516RP only)
For 1" shaft – add suffix A
For 1-3/4" shaft – add suffix B
For 2" shaft, add suffix C
For 2-1/2" shaft, add suffix D
RBW-1
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side. Other shaft
lengths available
RBW-2P
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on each side with fixed
Penta in handle (not shown)
RBW-1P
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side with fixed Penta.
Other shaft lengths available
RBW-3
Ratcheting Box Wrench (Hex Shaft)
has a 5/16" hex shaft on one side,
3/8" hex shaft on the other side,
both 1-1/2" long
RBW51638SRP
RBW-1P
RBW-516RP
RBW-516RP
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side with ratcheting
Penta on other end. Other shaft
lengths available
RBW-38H
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side (not shown)
RBW-38HP
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side with fixed Penta in
handle (not shown)
RBW-38HRP
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side with ratcheting Penta
(not shown)
RBW-2
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on each side
18 262-784-8701
•
RBW-3P
Ratcheting Box Wrench
(with Penta) has 5/16" hex shaft on
one side, 3/8" hex shaft on the other
side, both 1-1/2" long - fixed Penta
in handle (not shown)
RBW-2
RBW-51638RP
Ratcheting Box Wrench (with ratcheting
Penta) has 5/16" hex shaft on one side,
3/8" hex shaft and rotating Penta
on other end
RBW51638SRP
Ratcheting Box Wrench (with ratcheting
Penta) has 5/16" hex shaft on one side
and a 3/8" socket (opposed) with
ratcheting Penta on opposite end of tool
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 19
Isolated
Accessories
Hex Wrenches
RBW-3
RBW-51638RP
RBW-1
Ratcheting Box Wrench
Wrench – 5/16" or 3/8" Hex Shaft
(U.S. Patent Number(s): US D492,556 S)
Speed Systems' Ratcheting Box Wrenches are designed to
provide end to end isolation for maximum safety. The RBW
wrenches have a center "window" displaying the separation
of the tool ends and are rated for 1000V. The wrenches are
available with a variety of end options.
Consult the factory for configurations other than those shown.
Alternate Shaft Lengths
(RBW-1, RBW-1P, RBW-516RP only)
For 1" shaft – add suffix A
For 1-3/4" shaft – add suffix B
For 2" shaft, add suffix C
For 2-1/2" shaft, add suffix D
RBW-1
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side. Other shaft
lengths available
RBW-2P
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on each side with fixed
Penta in handle (not shown)
RBW-1P
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side with fixed Penta.
Other shaft lengths available
RBW-3
Ratcheting Box Wrench (Hex Shaft)
has a 5/16" hex shaft on one side,
3/8" hex shaft on the other side,
both 1-1/2" long
RBW51638SRP
RBW-1P
RBW-516RP
RBW-516RP
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on one side with ratcheting
Penta on other end. Other shaft
lengths available
RBW-38H
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side (not shown)
RBW-38HP
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side with fixed Penta handle
(not shown)
RBW-38HRP
Ratcheting Box Wrench (Hex Shaft)
has 3/8" hex shaft extended 1-1/2"
on one side with ratcheting Penta
(not shown)
RBW-2
Ratcheting Box Wrench (Hex Shaft)
has 5/16" hex shaft extended
1-1/2" on each side
18 262-784-8701
•
RBW-3P
Ratcheting Box Wrench
(with Penta) has 5/16" hex shaft on
one side, 3/8" hex shaft on the other
side, both 1-1/2" long - fixed Penta
in handle (not shown)
RBW-2
RBW-51638RP
Ratcheting Box Wrench (with ratcheting
Penta) has 5/16" hex shaft on one side,
3/8" hex shaft and rotating Penta on
other end, both 1-1/2" long, a ratcheting
Penta on other end
RBW51638SRP
Ratcheting Box Wrench (with ratcheting
Penta) has 5/16" hex shaft on one side
and a 3/8" socket (opposed) with
ratcheting Penta on opposite end of tool
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 19
IsolatedContinued
Accessories
Build Your Own Wrench
Penta Socket with Ergonomic Handle
Don’t see what you need in our regular line? Speed Systems gives you the
option of configuring a wrench with the components you want! Choose one
or more of the component options shown below to customize your wrench.
PW-2
Speed Systems offers both fixed and ratcheting Penta
Wrenches for use on power transformers. Both the PW-2
(fixed wrench) and RBW-RP (ratcheting wrench) are attached
to Speed Systems’ patented handle.
Note: Not all component options are compatible with all other options.
Configurations that require custom welding or other services may require
a minimum quantity purchase.
PW-2
Fixed Penta Security Wrench
RBW-RP
Ratcheting Penta Security Wrench
Specialty Wrenches
Torque Limiter
(specify in-lbs and tip)
Ratcheting
Box Wrench
(specify size)
RBW-RP
RBW with Square Drive
The RBW line includes square drive with hex shaft
or socket options. Specify 3/8" or ½" drive and opposing
hex bit or socket size.
Tap
(specify size)
Hex Shaft
(specify size and length)
RBW-38SQ
Ratcheting box wrench with 3/8" square drive (not shown)
Die
(specify size)
RBW-12SQ
Ratcheting box wrench with ½" drive (not shown)
RBW with Torque Limiter
The RBW is available with a torque limiter to provide an isolated
torqueing hex bit. Fixed torque values between 100 and 140 in-lb
are available. Specify torque value and drive tip.
RBW-34SRP
Square Drive
(specify size)
RBW-TK
Isolated Ratcheting Torque Wrench (not shown)
Ratcheting Penta
Sockets/Combination
The RBW line includes various socket options.
All are built on our patented, isolated handle
and are rated for 1000V.
Handle Ring
Standard or Deep Socket
(specify size)
Contact the factory for styles and configurations not shown.
RBW-34SRP
Ratcheting Wrench with Ratcheting Penta has
3/4" socket with Penta socket (opposed)
RBW-91634WE-S
Ratcheting Box Wrench (Sockets) has 9/16" x 3/4"
standard sockets (opposed) with handle loop
RBW-91634WE-S
RBW-91634WE-L
Ratcheting Box Wrench (Sockets) has 9/16" x 3/4"
long sockets (opposed) with handle loop (not shown)
Ratcheting Box Wrench
(specify size)
Fixed Penta Socket
20 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 21
IsolatedContinued
Accessories
Build Your Own Wrench
Penta Socket with Ergonomic Handle
Don’t see what you need in our regular line? Speed Systems gives you the
option of configuring a wrench with the components you want! Choose one
or more of the component options shown below to customize your wrench.
PW-2
Speed Systems offers both fixed and ratcheting Penta
Wrenches for use on power transformers. Both the PW-2
(fixed wrench) and RBW-RP (ratcheting wrench) are attached
to Speed Systems’ patented handle.
Note: Not all component options are compatible with all other options.
Configurations that require custom welding or other services may require
a minimum quantity purchase.
PW-2
Fixed Penta Security Wrench
RBW-RP
Ratcheting Penta Security Wrench
Specialty Wrenches
Torque Limiter
(specify in-lbs and tip)
Ratcheting
Box Wrench
(specify size)
RBW-RP
RBW with Square Drive
The RBW line includes square drive with hex shaft
or socket options. Specify 3/8" or ½" drive and opposing
hex bit or socket size.
Tap
(specify size)
Hex Shaft
(specify size and length)
RBW-38SQ
Ratcheting box wrench with 3/8" square drive (not shown)
Die
(specify size)
RBW-12SQ
Ratcheting box wrench with ½" drive (not shown)
RBW with Torque Limiter
The RBW is available with a torque limiter to provide an isolated
torqueing hex bit. Fixed torque values between 100 and 140 in-lb
are available. Specify torque value and drive tip.
RBW-34SRP
Square Drive
(specify size)
RBW-TK
Isolated Ratcheting Torque Wrench (not shown)
Ratcheting Penta
Sockets/Combination
The RBW line includes various socket options.
All are built on our patented, isolated handle
and are rated for 1000V.
Handle Ring
Standard or Deep Socket
(specify size)
Contact the factory for styles and configurations not shown.
RBW-34SRP
Ratcheting Wrench with Ratcheting Penta has
3/4" socket with Penta socket (opposed)
RBW-91634WE-S
Ratcheting Box Wrench (Sockets) has 9/16" x 3/4"
standard sockets (opposed) with handle loop
RBW-91634WE-S
RBW-91634WE-L
Ratcheting Box Wrench (Sockets) has 9/16" x 3/4"
long sockets (opposed) with handle loop (not shown)
Ratcheting Box Wrench
(specify size)
Fixed Penta Socket
20 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 21
ISE Series
IsolatedContinued
Isolated Shaft Extensions are designed for use with a socket
wrench or torque wrench where total isolation is required
between the socket and extension.
Accessories
The ISE Series tools are constructed on thick-walled filament
wound fiberglass shafts and provide total end to end
separation for isolation.
RBW-38TD
The ISE-375, ISE-4 and ISE-WE feature 5/16” hex
shafts for use on secondary set screw bar connectors.
The ISE-6, ISE-8 and ISE-14 feature pin lock drives to
serve as isolated extensions for use with ratchet wrenches.
ISE-375
Consult the factory for additional lengths
ISE-4
ISE-WE
ISE-375
Isolated Shaft Tool has a 5/16" hex shaft and 3/8"
drive for use on secondary set screw bar connectors
(3-3/4" overall length, rated 1000V, 600 in. lbs)
ISE-4
Isolated Shaft Tool has a 5/16" hex shaft and 3/8"
drive for use on secondary set screw bar connectors
(4-1/2" overall length, rated 1000V, 600 in. lbs)
RBW-12TD
ISE-WE
Isolated Shaft Tool has a 5/16" hex shaft and 1/2"
drive for use on secondary set screw bar connectors
(5-1/2" overall length, rated 1000V, 600 in. lbs)
Specialty Wrenches
RBW-TD Series
The RBW-TD Tap and Die Tools have a tap and die for
chasing threads on connectors and probes built on our
patented isolated handle.
Contact the factory for styles and configurations not shown.
RBW-12TD
Ratcheting Tap and Die has 1/2-13 bottoming tap and die
for chasing threads on transformer ground lugs
RBW-58TD
ISE-6
Isolated Shaft Tool has a 3/8" pin lock drive
for use as an Isolated Socket Extension
(6-1/2" overall length, rated 5kV, 600 in. lbs.)
ISE-8
ISE-6
IIsolated Shaft Tool has a 1/2" pin lock drive
for use as an Isolated Socket Extension
(8" overall length, rated 5kV, 600 in. lbs)
ISE-14
ISE-8
Isolated Shaft Tool has a 1/2" pin lock drive
for use as an Isolated Socket Extension
(14" overall length, rated 10kV, 600 in. lbs)
RBW-38TD
Ratcheting Tap and Die has 3/8-16 tap and die for chasing
threads on loadbreak elbow probe and connector
ISE-14
RBW-58TD
Ratcheting Tap and Die has 5/8-11 tap and die
for chasing threads on 600A connectors
22 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 23
ISE Series
IsolatedContinued
Isolated Shaft Extensions are designed for use with a socket
wrench or torque wrench where total isolation is required
between the socket and extension.
Accessories
The ISE Series tools are constructed on thick-walled filament
wound fiberglass shafts and provide total end to end
separation for isolation.
RBW-38TD
The ISE-375, ISE-4 and ISE-WE feature 5/16” hex
shafts for use on secondary set screw bar connectors.
The ISE-6, ISE-8 and ISE-14 feature pin lock drives to
serve as isolated extensions for use with ratchet wrenches.
ISE-375
Consult the factory for additional lengths.
ISE-4
ISE-WE
ISE-375
Isolated Shaft Tool has a 5/16" hex shaft and 3/8"
drive for use on secondary set screw bar connectors
(3-3/4" overall length, rated 1000V, 600 in. lbs.)
ISE-4
Isolated Shaft Tool has a 5/16" hex shaft and 3/8"
drive for use on secondary set screw bar connectors
(4-1/2" overall length, rated 1000V, 600 in. lbs.)
RBW-12TD
ISE-WE
Isolated Shaft Tool has a 5/16" hex shaft and 1/2"
drive for use on secondary set screw bar connectors
(5-1/2" overall length, rated 1000V, 600 in. lbs.)
Specialty Wrenches
RBW-TD Series
The RBW-TD Tap and Die Tools have a tap and die for
chasing threads on connectors and probes built on our
patented isolated handle.
Contact the factory for styles and configurations not shown.
RBW-12TD
Ratcheting Tap and Die has 1/2-13 bottoming tap and die
for chasing threads on transformer ground lugs
RBW-58TD
ISE-6
Isolated Shaft Tool has a 3/8" pin lock drive
for use as an Isolated Socket Extension
(6-1/2" overall length, rated 5kV, 600 in. lbs.)
ISE-8
ISE-6
IIsolated Shaft Tool has a 1/2" pin lock drive
for use as an Isolated Socket Extension
(8" overall length, rated 5kV, 600 in. lbs.)
ISE-14
ISE-8
Isolated Shaft Tool has a 1/2" pin lock drive
for use as an Isolated Socket Extension
(14" overall length, rated 10kV, 600 in. lbs.)
RBW-38TD
Ratcheting Tap and Die has 3/8-16 tap and die for chasing
threads on loadbreak elbow probe and connector
ISE-14
RBW-58TD
Ratcheting Tap and Die has 5/8-11 tap and die
for chasing threads on 600A connectors
22 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 23
Knives and Pliers
NonIsolated
The SC-10 and SC-11 Semi-Con Edge Wedges are designed
for lifting the front edge of the cable semi-con layer after it has
been scored. The tools are supplied with a leather sheath.
Accessories
Overhead Lineman’s Wrench (OHW Series)
OHW
The OHW Series Overhead Lineman’s Wrench have 3/4",
1" and 1-1/8" square drive sockets on single head for
or use on
1/2", 5/8" and 3/4" hardware. The wrenches have an open
n
center to allow the bolt to pass through. The wrenches
also
es als
o
have a large reversing lever and a padded handle.
The SC-13 Semi-Con Roller Grip is designed to provide
controlled rolling of the semi-con layer that has been scored.
This method of rolling helps reduce tearing of the semi-con
as it is being removed.
SC-10
SC
SC-10
Semi-Con Edge Wedge
SC-11
The OHW Series also includes a two-sided 3/4" and 9/16"
12 point ratcheting box wrench on opposite end
Semi-Con Edge Wedge with finger grip
The OHW-D version has deeper sockets to allow more
e
clearance between the pole and the user’s hand.
Semi-Con Roller Grip
SC-13
OHW
3/4", 1" and 1-1/8" square sockets with two-sided
3/4" and 9/16" ratcheting box wrench on the other end
OHW-D
OHW-D
3/4", 1" and 1-1/8" square deep sockets with two-sided
3/4" and 9/16" ratcheting box wrench on the other end
SC-11
Penta/Hex Security Wrenches
SC-13
PHW-1
The PHW-1 has a Penta socket on one end and a 3/4"
hex on the other. It is made of stainless steel with a
captive folding cross-rod for leverage
PHS Series - The PHS-1 and PHS-2 include a Penta and
3/4" hex socket combined into one socket with a common
3/8" (PHS-1) or ½” (PHS-2) center drive. The tool
is reversible when used with a socket extension.
UTR Universal Test Rod
PHS-1
Penta/Hex Security Wrench with a 3/8" square drive
Allows testing 15kV, 25kV and Elastimold 35kV Deadbreak
and Loadbreak bushings. It features an OP Eye for stick
operation and includes a disk for connecting test leads.
RBW-34SRP
PHS-2
Penta/Hex Security Wrench with a 1/2" square drive
Not for use on Eaton (Cooper/RTE) or
Hubbell (Chardon) 35kV bushings
RBW-34SRP
Ratcheting ¾” socket and Penta Wrench on our
patented ergonomically friendly isolated handle
Other socket sizes available
ECT-2 Elbow Cleaning Tool
PHW-1
The Elbow Cleaning Tool is designed to enable
cleaning of the bushing cavity of 15kV and 25kV
class loadbreak elbows. Made of PVC, the tool
has a tapered shaft that closely conforms to
the cavity of the elbow. The end of the tool
has two slots to hold a cleaning cloth.
UTR
PHS-1
24 262-784-8701
•
ECT-2
PHS-2
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 25
Knives and Pliers
NonIsolated
The SC-10 and SC-11 Semi-Con Edge Wedges are designed
for lifting the front edge of the cable semi-con layer after it has
been scored. The tools are supplied with a leather sheath.
Accessories
Overhead Lineman’s Wrench (OHW Series)
OHW
The OHW Series Overhead Lineman’s Wrench have 3/4",
1" and 1-1/8" square drive sockets on single head for
or use on
1/2", 5/8" and 3/4" hardware. The wrenches have an open
n
center to allow the bolt to pass through. The wrenches
also
es als
o
have a large reversing lever and a padded handle.
The SC-13 Semi-Con Roller Grip is designed to provide
controlled rolling of the semi-con layer that has been scored.
This method of rolling helps reduce tearing of the semi-con
as it is being removed.
SC-10
SC
SC-10
Semi-Con Edge Wedge
SC-11
The OHW Series also includes a two-sided 3/4" and 9/16"
12 point ratcheting box wrench on opposite end
Semi-Con Edge Wedge with finger grip
The OHW-D version has deeper sockets to allow more
e
clearance between the pole and the user’s hand.
Semi-Con Roller Grip
SC-13
OHW
3/4", 1" and 1-1/8" square sockets with two-sided
3/4" and 9/16" ratcheting box wrench on the other end
OHW-D
OHW-D
3/4", 1" and 1-1/8" square deep sockets with two-sided
3/4" and 9/16" ratcheting box wrench on the other end
SC-11
Penta/Hex Security Wrenches
SC-13
PHW-1
The PHW-1 has a Penta socket on one end and a 3/4"
hex on the other. It is made of stainless steel with a
captive folding cross-rod for leverage
PHS Series - The PHS-1 and PHS-2 include a Penta and
3/4" hex socket combined into one socket with a common
3/8" (PHS-1) or ½” (PHS-2) center drive. The tool
is reversible when used with a socket extension.
UTR Universal Test Rod
PHS-1
Penta/Hex Security Wrench with a 3/8" square drive
Allows testing 15kV, 25kV and Elastimold 35kV Deadbreak
and Loadbreak bushings. It features an OP Eye for stick
operation and includes a disk for connecting test leads.
RBW-34SRP
PHS-2
Penta/Hex Security Wrench with a 1/2" square drive
Not for use on Eaton (Cooper/RTE) or
Hubbell (Chardon) 35kV bushings
RBW-34SRP
Ratcheting ¾” socket and Penta Wrench on our
patented ergonomically friendly isolated handle
Other socket sizes available
ECT-2 Elbow Cleaning Tool
PHW-1
The Elbow Cleaning Tool is designed to enable
cleaning of the bushing cavity of 15kV and 25kV
class loadbreak elbows. Made of PVC, the tool
has a tapered shaft that closely conforms to
the cavity of the elbow. The end of the tool
has two slots to hold a cleaning cloth.
UTR
PHS-1
24 262-784-8701
•
ECT-2
PHS-2
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 25
CPK-1
ToolBoxes
CPK-2
Cable Prep Kits
Bags & Kits
Speed Systems offers various kits that include
some of the most common tool combinations.
Contact the factory for custom kit configurations.
Steel Boxes
CPK-1
Tool Boxes constructed of 20 ga. steel with a full-length
piano hinge and oil-resistant pad to cushion the tools.
The case has an internal divider to separate the 1542
Series Stripper and 1700SS Series Semi-Con Scorer.
CPK-18
Kit with 1542-2CL, 1646X and 1700SS
in a CPK-12 Case
CPK-2
Kit with 1542-2CL, 1646X, 1700SS, SC-11
and SC-13 in a CPK-12 Case
CPK-12
Small Steel Tool Case
12" x 4.5" x 4" (30.5 x 11.4 x 10.2 cm) (front)
CPK-3
CPK-4
CPK-5
CPK-6
CPK-7
CPK-8
CPK-10
CPK-11
CPK-3
Kit with 1542-2AS, 1646X, SC-11
and SC-13 in a CPK-12 Case
CPK-18
Large Steel Tool Case
18" x 8.25" x 4" (45.7 x 21.0 x 10.2 cm) (back)
(tools not included)
CPK-4
CPK
CPK-12
Kit with 1542-2CL, 1646X, 1700SS,
CT-1, LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-14 Bag
CPK-5
Canvas Bags
Kit with 1542-2CL, 1646X, 1700SS,
BIT/E180AT, LPW1525/TK120X-N,
SC-11 and SC-13 in a CPK-14 Bag
Reinforced canvas bags with six internal pockets
designed to hold tools and accessories required
for cable preparation.
CPK-6
Kit with Mark I, Mark I Tool Stop, 1700SS,
SC-11 and SC-13 in a CPK-14 Bag
CPK-14
Small Canvas Bag
14" x 9" x 7" (35.6 x 22.9 x 17.8 cm) (front)
(tools not included)
CPK-7
Kit with Mark I, Mark I Tool Stop, 1700SS,
BIT/E180AT, LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-14 Bag
CPK-24
Large Canvas Bag
24" x 15" x 6" (61.0 x 38.1 x 15.2 cm) (back)
CPK-8
Kit with 1542-2CL, 1646X, 1700SS and
LPW1525/TK120X-N in a CPK-18 Case
CPK-24
CPK-9
Individual Tool Bags
Kit with 1542-2CL, 1646X, 1700SS,
LPW1525/TK120X-N, SC-11 and
SC-13 in a CPK-18 Case
Individual Tool Bags are sized to easily and efficiently
tly carry
one or more Speed Systems tools. All of the bags are
manufactured of sturdy canvas and feature a sturdy,
dy,
zipper closure.
CPK-10
Kit with 1542-2AS, 1646X,
LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-18 Case
TB-9
CPK-14
Small Individual Tool Bag
6 x 10" (15.2 x 25.4 cm)
TB-10
CPK-11
Kit with Mark II, Mark II Tool Stop, 1800SS,
CT-2, SC-11 and SC-13 in a CPK-24 Bag
TB-12
Medium Individual Tool Bag
7 x 14" (17.8 x 35.6 cm)
TB-11
CPK-9
Large Individual Tool Bag
14 x 16-1/2" (35.6 x 41.9 cm)
TB-12
Extra Large Individual Tool Bag 22 x 6 x 3”
(55.9 x 15.2 x 7.6 cm)
TB-10
TB-11
TB-9
26 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 27
CPK-1
ToolBoxes
CPK-2
Cable Prep Kits
Bags & Kits
Speed Systems offers various kits that include
some of the most common tool combinations.
Contact the factory for custom kit configurations.
Steel Boxes
CPK-1
Tool Boxes constructed of 20 ga. steel with a full-length
piano hinge and oil-resistant pad to cushion the tools.
The case has an internal divider to separate the 1542
Series Stripper and 1700SS Series Semi-Con Scorer.
Kit with 1542-2CL, 1646X and 1700SS
in a CPK-12 Case
CPK-12
CPK-2
Kit with 1542-2CL, 1646X, 1700SS, SC-11
and SC-13 in a CPK-12 Case
CPK-12
Small Steel Tool Case
12" x 4.5" x 4" (30.5 x 11.4 x 10.2 cm) (front)
CPK-3
CPK-4
CPK-5
CPK-6
CPK-7
CPK-8
CPK-10
CPK-11
CPK-3
Kit with 1542-2AS, 1646X, SC-11
and SC-13 in a CPK-12 Case
CPK-18
Large Steel Tool Case
18" x 8.25" x 4" (45.7 x 21.0 x 10.2 cm) (back)
CPK-4
CPK-18
Kit with 1542-2CL, 1646X, 1700SS,
CT-1, LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-14 Bag
CPK-5
Canvas Bags
Kit with 1542-2CL, 1646X, 1700SS,
BIT/E180AT, LPW1525/TK120X-N,
SC-11 and SC-13 in a CPK-14 Bag
Reinforced canvas bags with six internal pockets
designed to hold tools and accessories required
for cable preparation.
CPK-6
Kit with Mark I, Mark I Tool Stop, 1700SS,
SC-11 and SC-13 in a CPK-14 Bag
CPK-14
Small Canvas Bag
14" x 9" x 7" (35.6 x 22.9 x 17.8 cm) (front)
CPK-7
Kit with Mark I, Mark I Tool Stop, 1700SS,
BIT/E180AT, LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-14 Bag
CPK-24
Large Canvas Bag
24" x 15" x 6" (61.0 x 38.1 x 15.2 cm) (back)
CPK-8
Kit with 1542-2CL, 1646X, 1700SS and
LPW1525/TK120X-N in a CPK-18 Case
CPK-14
Individual Tool Bags
CPK-9
Individual Tool Bags are sized to easily and efficiently carry
one or more Speed Systems tools. All of the bags are
e
manufactured of sturdy canvas and feature a sturdy,
zipper closure.
Kit with 1542-2CL, 1646X, 1700SS,
LPW1525/TK120X-N, SC-11 and
SC-13 in a CPK-18 Case
CPK-24
CPK-10
Kit with 1542-2AS, 1646X,
LPW1525/TK120X-N, SC-11
and SC-13 in a CPK-18 Case
TB-9
Small Individual Tool Bag
6 x 10" (15.2 x 25.4 cm)
CPK-11
Kit with Mark II, Mark II Tool Stop, 1800SS,
CT-2, SC-11 and SC-13 in a CPK-24 Bag
TB-10
Medium Individual Tool Bag
7 x 14" (17.8 x 35.6 cm)
TB-11
TB-12
TB-11
CPK-9
Large Individual Tool Bag
14 x 16-1/2" (35.6 x 41.9 cm)
FPO
Photographing
NEW bags
TB-12
Extra Large Individual Tool Bag 22 x 6 x 3”
(55.9 x 15.2 x 7.6 cm)
TB-9
TB-10
26 262-784-8701
•
www.spdsystems.com
www.spdsystems.com
•
262-784-8701 27
Custom
Cable Prep Kits with Multiple Tool Combinations Ordering Chart
Tools
Custom Tools
Speed Systems focuses on adjustable tools to fit a wide variety of
cables without requiring the use of bushings or adapters. There are some
applications, though, that require a one tool to one cable approach.
We do that, too!
We currently offer a variety of tools designed for a specific function on a
specific cable. These tools require the customer to provide cable samples
so we can ensure that the tool will properly function on that cable.
There may be minimum order
der quantities required on custom tools.
Penciling Tool
Contact the factory for more
re information.
Penciling Tool
Penciling Tools are designed
ed to cut a 1-1/2” long
taper on the cable’s insulation
ion for applications
requiring a tape build-up off the stress cone.
The tool operates like and old-style manual
pencil sharpener to carve away the
insulation to the correct taper.
per.
Cable samples are required
d
to ensure the blade settingss
adequately remove
the insulation.
Drill Operated Isolated
Secondary Stripper
The Speed Systems Drill Operated Isolated Secondary
Strippers are available to remove the insulation layer
from secondary cables in a variety of sizes and strip
back lengths. The strip back length must be specified
along with the cable sample.
Covered Tap Wire Stripper
Speed Systems Covered Tap Wire Strippers are
specifically designed to perform end and mid-span
strips on covered tap wire. Cable samples are
required to ensure the tool is properly sized for the
specific cable being stripped.
Covered Tap
Wire Stripper
•
www.spdsystems.com
CPK-12
CASE
CPK-1
CPK-2
CPK-3
CPK-4
CPK-5
CPK-6
CPK-7
CPK-8
CPK-9
CPK-10
CPK-11
X
X
X
CPK-14
BAG
1542-2AS
STRIPPER CT-1
MARK I
w/1646X CHAMFER w/TOOL
GAUGE
TOOL
STOP
X
X
LPW1525/ BIT/
TK120X-N E180AT
1700SS COMB. BUSHING
SCORER TOOL
TOOL
SC-11
EDGE
WEDGE
SC-13
ROLLER
GRIP
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CPK-24
BAG
X
X
X
X
X
X
X
X
X
CT-2
X
X
X
X
X
X
X
X
Mark II 1800SS
w/Tool
Stop
Diameter Over Shielding and Conductor
Drill Operated Isolated Secondary Stripper
28 262-784-8701
Catalog
NUMBER
1542-2CL
STRIPPER
CPK-18 w/1646X
CASE GAUGE
15kV - .175" (4.4mm)
Con. Str.
Compact
Cond.
Size Inch mm Inch mm
4
.720 18.3 .700 17.8
2
.780 19.8 .760 19.3
1
.820 20.8 .790 20.1
1/0
.865 22.0 .825 21.0
2/0
.910 23.1 .865 22.0
3/0
.960 24.4 .915 23.2
4/0 1.020 25.9 .965 24.5
250 1.075 27.3 1.020 25.9
350 1.220 31.0 1.155 29.3
500 1.335 34.4 1.275 32.4
600 1.445 36.7 1.365 34.7
750 1.550 39.4 1.460 37.1
1000 1.740 44.2 1.610 40.9
15kV - .220" (5.6mm)
Con. Str.
Compact
Inch mm Inch mm
.810 20.6 .790 20.1
.870 22.1 .850 21.6
.910 23.1 .880 22.4
.955 24.3 .915 23.2
1.000 25.4 .955 24.3
1.050 26.7 1.005 25.5
1.110 28.2 1.055 26.8
1.205 30.6 1.110 28.2
1.310 33.3 1.245 31.6
1.445 36.7 1.365 34.7
1.535 39.0 1.445 37.0
1.640 41.7 1.550 39.4
1.830 46.5 1.740 44.2
25kV - .260" (6.6mm)
Con. Str.
Compact
Inch mm Inch mm
.990 25.1
.960 24.4
1.035 26.3
.995 25.3
1.080 27.4 1.035 26.3
1.170 29.7 1.085 27.6
1.230 31.2 1.175 29.8
1.295 32.9 1.240 31.5
1.400 35.6 1.335 33.9
1.535 39.0 1.455 37.0
1.625 41.3 1.545 39.2
1.770 45.0 1.640 41.7
1.920 48.8 1.830 46.5
35kV - .345" (8.8mm)
Con. Str.
Compact
Inch mm Inch mm
1.245 31.6 1.205 30.6
1.290 32.8 1.245 31.6
1.340 34.0 1.295 32.9
1.400 35.6 1.345 34.2
1.470 37.3 1.415 35.9
1.575 40.0 1.510 38.4
1.750 45.5 1.630 41.4
1.840 46.7 1.760 44.7
1.945 49.4 1.855 47.1
2.095 53.2 2.005 50.9
www.spdsystems.com
•
262-784-8701 29
Custom
Cable Prep Kits with Multiple Tool Combinations Ordering Chart
Tools
Custom Tools
Speed Systems focuses on adjustable tools to fit a wide variety of
cables without requiring the use of bushings or adapters. There are some
applications, though, that require a one tool to one cable approach.
We do that, too!
We currently offer a variety of tools designed for a specific function on a
specific cable. These tools require the customer to provide cable samples
so we can ensure that the tool will properly function on that cable.
There may be minimum order
der quantities required on custom tools.
Penciling Tool
Contact the factory for more
re information.
Penciling Tool
Penciling Tools are designed
ed to cut a 1-1/2” long
taper on the cable’s insulation
ion for applications
requiring a tape build-up off the stress cone.
The tool operates like and old-style manual
pencil sharpener to carve away the
insulation to the correct taper.
per.
Cable samples are required
d
to ensure the blade settingss
adequately remove
the insulation.
Drill Operated Isolated
Secondary Strippers
The Speed Systems Drill Operated Isolated Secondary
Strippers are available to remove the insulation layer
from secondary cables in a variety of sizes and strip
back lengths. The strip back length must be specified
along with the cable sample.
Covered Tap Wire Stripper
Speed Systems Covered Tap Wire Strippers are
specifically designed to perform end and mid-span
strips on covered tap wire. Cable samples are
required to ensure the tool is properly sized for the
specific cable being stripped.
Covered Tap
Wire Strippers
•
www.spdsystems.com
CPK-12
CASE
CPK-1
CPK-2
CPK-3
CPK-4
CPK-5
CPK-6
CPK-7
CPK-8
CPK-9
CPK-10
CPK-11
X
X
X
CPK-14
BAG
1542-2AS
STRIPPER CT-1
MARK I
w/1646X CHAMFER w/TOOL
GAUGE
TOOL
STOP
X
X
LPW1525/ BIT/
TK120X-N E180AT
1700SS COMB. BUSHING
SCORER TOOL
TOOL
SC-11
EDGE
WEDGE
SC-13
ROLLER
GRIP
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CPK-24
BAG
X
X
X
X
X
X
X
X
X
CT-2
X
X
X
X
X
X
X
X
Mark II 1800SS
w/Tool
Stop
Diameter Over Shielding and Conductor
Drill Operated Isolated Secondary Stripper
28 262-784-8701
Catalog
NUMBER
1542-2CL
STRIPPER
CPK-18 w/1646X
CASE GAUGE
15kV - .175" (4.4mm)
Con. Str.
Compact
Cond.
Size Inch mm Inch mm
4
.720 18.3 .700 17.8
2
.780 19.8 .760 19.3
1
.820 20.8 .790 20.1
1/0
.865 22.0 .825 21.0
2/0
.910 23.1 .865 22.0
3/0
.960 24.4 .915 23.2
4/0 1.020 25.9 .965 24.5
250 1.075 27.3 1.020 25.9
350 1.220 31.0 1.155 29.3
500 1.335 34.4 1.275 32.4
600 1.445 36.7 1.365 34.7
750 1.550 39.4 1.460 37.1
1000 1.740 44.2 1.610 40.9
15kV - .220" (5.6mm)
Con. Str.
Compact
Inch mm Inch mm
.810 20.6 .790 20.1
.870 22.1 .850 21.6
.910 23.1 .880 22.4
.955 24.3 .915 23.2
1.000 25.4 .955 24.3
1.050 26.7 1.005 25.5
1.110 28.2 1.055 26.8
1.205 30.6 1.110 28.2
1.310 33.3 1.245 31.6
1.445 36.7 1.365 34.7
1.535 39.0 1.445 37.0
1.640 41.7 1.550 39.4
1.830 46.5 1.740 44.2
25kV - .260" (6.6mm)
Con. Str.
Compact
Inch mm Inch mm
.990 25.1
.960 24.4
1.035 26.3
.995 25.3
1.080 27.4 1.035 26.3
1.170 29.7 1.085 27.6
1.230 31.2 1.175 29.8
1.295 32.9 1.240 31.5
1.400 35.6 1.335 33.9
1.535 39.0 1.455 37.0
1.625 41.3 1.545 39.2
1.770 45.0 1.640 41.7
1.920 48.8 1.830 46.5
35kV - .345" (8.8mm)
Con. Str.
Compact
Inch mm Inch mm
1.245 31.6 1.205 30.6
1.290 32.8 1.245 31.6
1.340 34.0 1.295 32.9
1.400 35.6 1.345 34.2
1.470 37.3 1.415 35.9
1.575 40.0 1.510 38.4
1.750 45.5 1.630 41.4
1.840 46.7 1.760 44.7
1.945 49.4 1.855 47.1
2.095 53.2 2.005 50.9
www.spdsystems.com
•
262-784-8701 29
Quality
tools for
Installing
Power Cable
Systems
Speed Systems, Inc. • PO Box 581 • Brookfield • WI 53008-0581
Ph: 262-784-8701 • Fax: 262-784-8703 • www.spdsystems.com
9/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising