INSTRUCTION - Net2Air USB bridge

INSTRUCTION - Net2Air USB bridge
21/11/2011
Paxton
Ins-30084 Net2Air USB bridge
Technical Support
01273 811011
Technical help is available:
support@paxton.co.uk
Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Net2Air wireless communication
The access control unit connects to the Net2 software running on the PC using Paxton Net2Air proprietary wireless
technology. A Net2Air bridge enables communication from the Net2 software to the Paxton family of wireless
products.
Radio signals do not always behave as you might expect. For example, a mobile phone that displays a full signal
on one part of the site will lose signal completely only a few metres away. These problems can be addressed by
using the Net2 site surveyor kit (690-200).
See also: XAN1095 - Net2 nano - How does it work? < http://paxton.info/974 >
X
AN1096 - How to plan a Net2 nano installation < http://paxton.info/975 >
X
Ins-30096 - Net2Air site surveyor < http://paxton.info/1015 >
Reader
Net2
Server
Control unit
Net2Air USB bridge
Software - Requires Net2 v4.14 or later.
Software Configuration
Plug the device into a spare USB port on the PC. Restarting the Net2 server will then register the unit automatically
in the Net2 software. This displays in the Net2 Server Configuration Utility/Net2Air bridge as a fixed IP.
Page 1
Enclosure
The unit should be mounted vertically
in the supplied base to achieve the
optimum range.
Paxton
Access
Power
USB activity
USB connection
Net2Air activity
Radio frequency
The unit is set to channel 11 (2.405 GHz). This product should not be installed within 3 metres of any other radio
(LAN/Wi-Fi) equipment to reduce the possibility of interference.
Specifications
System Specification
ACU's per Net2Air bridge - Recommended
Min
Max
1
10
Net2Air USB bridge per system
1
Carrier frequency
2.405 GHz
30 m
Net2Air wireless range
Electrical
Voltage
Min
4.75 V
Environment
5.25 V
Min
Max
-20 °C
55 °C
Waterproof
Dimensions
USB certified
150 mA
Current
Operating temperature
Max
No
Width
Height
Length
70 mm
195 mm
100 mm
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising