TECHNICAL DATA SHEET code MRG2132 version

TECHNICAL DATA SHEET code MRG2132 version
TECHNICAL DATA SHEET
COAX RG 213 FRNC
code
version
date
page
MRG2132
3
2011-11-28
1/2
APPLICATION
Coaxial cables used for Radio-frequency designed according the International Standard IEC
1196.
CONSTRUCTION
1 2
3
4
1
2
3
4
Inner conductor
Dielectric
Braid
Sheath
7x0.75 mm stranded soft annealed copper
Solid PE
Annealed copper
FRNC according the European Standard HD 50290_2_27.
REQUIREMENTS AND TEST METHODS
Test methods in accordance with European standard EN 50117-1.
Mechanical characteristics
1. Inner conductor.
Diameter:
2. Dielectric:
Diameter:
Centricity:
3. Outer conductor:
Diameter screen:
Coverage braid:
4. Sheath:
Diameter:
Tensile strength:
Elongation at break:
Corrosivity:
LOI:
Smoke density
Resistance to flame propagation:
5. Cable:
Crush resistance of cable:
Storage/operating temperature:
Minimum installation temperature:
Minimum static bend radius:
2.25 mm ± 0.03 mm
7.25 mm ± 0.2 mm
≥ 0.85
8.0 mm ± 0.25 mm
92 % ± 5 %
10.3 mm ± 0.3 mm
≥ 9.0 N/mm2
≥ 125 %
To meet European Standard HD60754-2
> 35 %
Pass Standard IEC 61034
To meet International Standard IEC 60332-1
< 1% (load of 700N)
-30°C to +70°C
-5 °C
50 mm
ã Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
TECHNICAL DATA SHEET
COAX RG 213 FRNC
Electrical characteristics
Mean characteristic impedance:
Regularity of impedance:
DC loop resistance:
DC resistance inner conductor:
DC resistance outer conductor:
Capacitance:
Velocity ratio:
Insulation resistance:
Voltage test of dielectric:
Return loss at
100-400 MHz:
400 –900 MHz:
Power rating at
100 MHz:
1000 MHz:
Attenuation at
Nominal
10 MHz:
2.0 dB/100m
50 MHz:
4.6 dB/100m
100 MHz:
6.6 dB/100m
300 MHz: 11.8 dB/100m
400 MHz: 13.8 dB/100m
Maximum attenuation is 10% higher.
code
version
date
page
MRG2132
3
2011-11-28
2/2
50 ± 2 W
> 46 dB
£ 11.5 W/km
£ 6.0 W/km
£ 5.5 W/km
100 pF/m ± 3 pF/m
0.66 ± 0.02
> 104 MW.km
3 kVdc
≥ 28.5 dB
≥ 23.5 dB
760 W
175 W
Attenuation at
Nominal
860 MHz: 20.9 dB/100m
1000 MHz: 22.8 dB/100m
1350 MHz: 27.0 dB/100m
1600 MHz: 29.7 dB/100m
2000 MHz: 33.8 dB/100m
REVISIONS
# Description
2 Added flame test and changed the FRNC requirements
3 Added smoke density
Date
Initials
28-11-2008 PBo
28-11-2011 PBo
Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27
January 2003); this is valid for all material produced after the RoHS compliant date for this product.
ã Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising