ThinManager-Ready Nematron nPC20 Thin Client Node

ThinManager-Ready Nematron nPC20 Thin Client Node
ThinManager-Ready Nematron nPC20
Thin Client Node Hardware
ThinManager-Ready Thin Client
DS nPC20-TMR, Rev B
UL/cUL Class I Div 2 Approved
Compact Form Factor
Intel® Processing
4 GB DRAM
55°C Operating Temp
Mounting Options
Made in USA
Standard Configuration
 ThinManager-Ready
 High Performance / Low Power CPU
options:
-Intel Dual Core ATOM E3826
Fanless Processor
(1.46 GHz, 1MB Cache, 2 Threads)
 4 GB DRAM
 I/O Connectivity:
- Two Gigabit (10/100/1000) Ethernet
ports
-One RS-232/422/485 serial port
-Two USB 3.0 ports
-Audio Out port
-Analog Video and HDMI ports
(Supports dual video)
 24 VDC (10-30 VDC) input
-Optional AC power supply sold
separately
 Simple, easy-to-use DIN Rail and
Shelf Mounting Brackets included
for mounting in multiple orientations
 UL and cUL Ordinary Locations
Listed
 UL and cUL Hazardous Locations
Listed
-Class I Division 2, Groups A, B,
C, & D when mounted
in a NEMA enclosure
 0°-55°C operational temperature
rating
 FCC & CE Compliant
 2-Year warranty
NOTE: The ThinManager-Ready configurations do not contain storage or operating system. They are configured for booting to a network
via ThinManager protocol only. These are NOT standalone PCs. These products have been verified to be ThinManager LXi and ThinManager -Ready compatible. Comark does not supply ThinManager. For application support, please contact ThinManager directly at
www.thinmanager.com.
1
Technical Specifications
nPC20-TMR
Physical
Overall Dimensions
4.49” x 6.40” x 1.50” (114.05mm x 162.56mm x 38.1mm)
Overall Dimensions w/
Mounting Brackets
4.49” x 7.40” x 1.98” (114.05mm x 187.96mm x 50.29mm)
Weight
2.0 lbs (0.9 kg)
Shipping Weight
3.0 lbs (1.4 kg)
Processor
Type & Processor
ATOM E3826 (fanless)
Intel Dual Core ATOM E3826
Core Speed 1.46 GHz
Threads
2
L2 Cache
1 MB
Chipset
Intel Baytrail-E3800 Series
Video RAM
Integrated Intel Gen7 Intel
Graphics DX 11, OGL3.2
Max. Resolution: 1920 x 1200
Ethernet Controller
Realtek RTL8111G-CG 10/100/1000
(2 ports)
Storage & Peripherals
DRAM
4GB Single Module (204-pin DDR3 SO-DIMM, non-ECC, unbuffered, 1066 MHz)
Available I/O
(1) Analog Video Port, (1) HDMI Video, (1) Serial RS-232/422/485 Port, (2) USB 3.0 Ports, (2) Gigabit 10/100/1000 Ethernet
Ports, (1) Audio Line Out port
Power
Input Power
15W
DC Input Voltage/Max
Current
10-30 VDC, 1.5 A Maximum
Optional External AC
Supply
100-240 VAC, 47-63 Hz, 1.1 A Maximum
NOTE: The ThinManager-Ready configurations do not contain storage or operating system. They are configured for booting to a network via
ThinManager protocol only. These are NOT standalone PCs. These products have been verified to be ThinManager LXi and ThinManager
-Ready compatible. Comark does not supply ThinManager. For application support, please contact ThinManager directly at
www.thinmanager.com.
2
Technical Specifications
Environmental
Temperature 1 Operating
0°C to 55°C
Non-operating
-20°C to 70°C
Humidity
20% to 80% RH, noncondensing
20% to 80% RH, noncondensing
Shock 15g peak acceleration, 11msec
30g peak acceleration, 11msec
Vibration (5-2000 Hz) 2
.006” peak to peak displacement, 1.0g maximum acceleration
.015” peak to peak displacement,
2.5g maximum acceleration
Altitude 3
Sea level to 10,000 feet
Sea level to 40,000 feet
1
2
Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized). Meets US Federal Requirements specified in 46
CFR 111.01-15 (d) for offshore electrical systems.
Shock & Vibration specifications established with Solid State drives and no rotating media.
3
Altitude specification is established by using all internal component specifications.
2
Compliance
FCC
47 CFR, Part 15, Class A
EU CE Marking
CE, EN 55022: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1
Agency Approvals * UL508 Listed, ANSI/ISA 12.12.01-2012 5, cUL Listed CSA C22.2, #142, cUL Listed CSA 22.2, #213
* nPC20: Class I Division 2, Groups A, B, C, D; Temp. Code: T4A, when installed on a flat surface of a Type 1 enclosure.
Features
1. 10-30 VDC
Power Supply
(AC optional, sold
separately)
2. UL/cUL 508, Class I
Div 2, CE Approvals
3. COM1
Serial Port
RS-232/422/485
4. Vented Chassis
Design for Optimal
Cooling
5. Finned Heat Sync
for Cooling
6. Mounting Brackets
7. Audio Line Out Port
8. Two USB 3.0 Ports
9. Dual Gigabit
10/100/1000
Ethernet Ports
10.Dual Video Output
- Analog VGA and
HDMI ports allow
video to be displayed
on two monitors
11.Rugged, exterior
chassis
12.Made with Pride in
the USA
11
2
5
12
1
4
7
3
10
9
6
DIN Rail Mounting - Side or Back
Back or Side DIN Rail Mount Configurations
(adjustable Din Rail clip included)
8
DIN Mounting on
M-Series Monitors
MTG-DIN-nPC20
Din Rail section that allows the nPC20
to be mounted to all M-Series Monitors,
including the M1500SRT monitor, using
the 75mm or 100mm VESA mounting
pattern on the rear of the units
Wall or Shelf Mount Brackets
Wall or Shelf Mounting Brackets
included with unit
Standard 2-year warranty
- Covers parts and service
3
Order Number Generation
Base Unit Configuration: nPC20-E3826-4GB-24-TMR, includes ThinManager-Ready Nematron nPC20 with Intel Dual
Core Fanless ATOM E3826 processor, No storage drive, No operating system, 4GB DRAM, and 24VDC power supply.
nPC20-E3826-4GB-24-TMR
nPC20-TMR
Processors:
E3826
Intel Dual Core ATOM E3826 (fanless)
DRAM:
-4GB
4GB DRAM
Power Supply:
-24
10-30 VDC non-isolated input
NOTE: The ThinManager-Ready configurations do not contain storage or operating system. They are configured for booting to a network via
ThinManager protocol only. These are NOT standalone PCs. These products have been verified to be ThinManager LXi and ThinManager
-Ready compatible. Comark does not supply ThinManager. For application support, please contact ThinManager directly at
www.thinmanager.com.
ThinManager HQ
1220 Old Alpharetta Road, Suite 390
Alpharetta, Georgia 30005 USA
Tel: 1-877-239-4282 - Toll Free
Fax: 678-990-0945
Email: info@thinmanager.com
Accessories
PWR-AC-nPC20
100-240 VAC Power Supply for connection directly to the
nPC20. nPC20 only rated for 50°C operation when using this
power supply.
NOTE: NOT allowed for use in installations where
Hazardous Locations Approvals are required.
MTG-DIN-nPC20
DIN Rail section for mounting
to the 75 or 100 mm VESA
pattern on the rear of all
M-Series monitors.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising