4 Position Switcher - An Authorized Voice and Data Products

4 Position Switcher - An Authorized Voice and Data Products
4 Position
Switcher
The 4PSWT is a four position alarming, homing, by passing sequential video switcher. One
alarm input via a rear cage clamp connector allows homing to camerra 4 in a manual mode.
Upon release of the alarm input, the switcher continues from where it left off prior to the
alarm occurrence. Front panel LED indicators show which camera is currently being homed.
The three position toggle switchers allow instant manual homing, camera by passing except
upon alarm, and auto sequencing mode. There is a recessed Dwell pot on the front panel to
adjust the dwell time from approximately 1 second to 30 seconds. The 4PSWT is powered by
9-12VDC and is supplied with a UL approved wall transformer.
Specifications
Video Inputs (Parent & Inset)
Toggle Positions
Video Outputs
Dwell Adjust
Dwell Time
Power
Power Supply
Camera Position
Connectors:
Video In/Out
Power Input
Alarm Input
Mechanical:
Case
Weight
Box Size
1VP-P 75 ohm terminated; toggle switch selectable
BYpass, Sequence & Home
1VP-P ohms terminated or unterminated
Front panel recessed pot
From approximately .2 seconds to 1 minute
5-12VDC
9-12VDC @ 100 mA
LED indicators (4) RED
BNC
DC Coax 2.1mm x 5.5mm
Screw terminal with quick disconnect
Beige Metal 5.13” W x 4.90” L x 1.38” H
0.60kg. (1.32lbs.)
8.0” W x 7.0” L x 2.5” H
American Video Equipment | 2000 W. Governors Circle Suite E, Houston, TX 77092 | T: 713-686-8409 | F: 713-686-8509
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising