TMG3200-RJ - TelcoBridges
Tmedia™
TMG3200-RJ
8 to 16 VoIP Gateway
The TelcoBridges Tmedia TMG3200 is our mid-level VoIP gateway.
Recognised for its high-capacity and high-performance, the TMG3200-RJ is
an 8 to 16 T1/E1 VoIP gateway that offers high-density in a single box (2U)
solution for carriers.
Ordering information
Part #
TMG3200-RJ8
TMG3200-RJ9
TMG3200-RJ10
TMG3200-RJ11
TMG3200-RJ12
TMG3200-RJ13
TMG3200-RJ14
TMG3200-RJ15
TMG3200-RJ16
Description
8 x T1/E1
9 x T1/E1
10 x T1/E1
11 x T1/E1
12 x T1/E1
13 x T1/E1
14 x T1/E1
15 x T1/E1
16 x T1/E1
Each configuration is available in
redundant AC or DC power.
TelcoBridges Inc.
Product Characteristics:







2U VoIP gateway,
256 - 512 VoIP channels
SIP, SS7, ISDN PRI, E1 CAS R2, T1 CAS R1
8 to 16 T1/E1
Software upgradeable by single T1/E1 and 32 VoIP channel
increment
Single or redundant AC or DC power supplies
1+1 Support
91 de la Barre, suite 01
Boucherville, QC
J4B 2X6, CANADA
Sales +1.450.655.8993
TB Support +1.866.438.4703
info@telcobridges.com
www.telcobridges.com
Tmedia TMG3200-RJ, 2U VoIP gateway (Front View)
Tmedia TMG3200-RJ 2U VoIP gateway (Dual DC/AC Power)
0Shown)
1
1 RJ45 serial port with RS-232C adapter
Supports virtual IP
Capacity and Voice Processing
256 to 512 VoIP channels (software upgrade)
Signaling
PSTN interfaces
Simultaneously supports any combination or all
of the following signaling protocols:
8 to 16 T1/E1 (software upgrade)
Independently configurable per port
RJ48C connectors on rear of unit
SIP
VoIP interfaces
Dual 100/1000Base-T, used separately or in bonding
RJ45 connectors on rear of unit
Supported RFCs: 2327, 2833, 2976, 3204, 3261,
3262, 3263, 3264, 3311, 3323, 3325, 3326, 3372,
3389, 3398, 3515, 3551, 3555, 3578, 3581, 3665,
3666, 3764, 3891, 4028, 4694, 5806
SIP-I/SIP-T
Vocoding
SIGTRAN
Universal codecs: G.711, G.723.1, G.726, G.729ab,
T.38 V.17, clear mode (RFC 4040)
Other codecs: G.722.2 (AMR-WB), G.728, G.729eg,
iLBC, AMR, EVRC, GSM FR/EFR, T.38 V.34, QCELP
M2PA, M2UA, M3UA, (IPSP, ASP, SG), IUA
SCTP (raw IP and UDP)
SS7 termination and/or relay supported
Up to 64 M2UA / M2PA links
Up to 20 M3UA peer server processes
Fax/Modem/Data
T.38 fax relay (V.17 and V.34)
Automatic G.711 fallback, modem and data passthrough
Clear mode (RFC 4040)
DTMF relay
SS7
Up to 64 MTP2 links (56, 64, n x 56/64 kbps, HSL)
Multiple redundant MTP2 links
Up to 64 MTP3 originating point codes and linksets
ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92,
ANSI 95, Q.767, Telcordia 97, ETSIv2, ETSIv3,
China, Singapore, UK, Brazil, SPIROU, Japan NTT
SCCP routing and global title transition
RFC 2833, SIP INFO Method, In-band
Echo cancellation
ISDN PRI
G.168 echo cancellation
128 ms echo tail on all channels simultaneously
Q.931 ISDN PRI: NI-2, 4ESS, 5ESS, DMS-100, DMS250, Euro ISDN, ETSI NET5 (France, Germany, UK,
China, Hong Kong, Korea), NTT (Japan), Australia
Voice processing
CAS
Adaptive and programmable jitter buffer (20 to 200
ms)
Voice activity detection (VAD)
Comfort noise generation (CNG)
MFC R1 (E&M, loop start user / network side)
MFC R2 (standard ITU, Brazil, Mexico)
Customizable protocol script files
Management interfaces
Single 100/1000Base-T for OAMP+T
2
TMG-CONTROL (Embedded
gateway control and management
software)
Embedded Call Control
Call routing based on: trunk group, calling/called
numbers digit manipulation, call cause code mapping
Advance call routing: Priority, load sharing, route
retry, Nature of Address (NOA) manipulation
Programmable call routing: Access and manipulation
of call parameters
RADIUS AAA (supports multiple RADIUS servers)
NPA-NXX routing (over 100,000 table entries)
H.248 (MEGACO) Call Control
ITU-T H.248 versions 1 and 2
UDP, SCTP, IPSec transport
DTMF and fax tone detection
Call progress, DTMF and COT tone generation
Call quality and inactivity alerts
H.248 control port redundancy (supports virtual IP)
Provisioning
Dynamic configuration changes
Configuration validation
Multiple configuration archive
Troubleshooting (TB Analytics)
Call Trace
Test Call
TB Sigtrace – Live Signaling Capture
System Snapshot
Electrical characteristics (Power
Input)
90 to 260 VAC, 47 to 63 Hz, -40 to -60 VDC
Redundant power supply option with dual power
inputs
Maximum 164W power consumption
Session management and billing
Physical characteristics
(Dimensions & Weight)
SIP peer availability polling
RTP inactivity monitoring, RTCP
CDR generation (RADIUS AAA and text file)
Integrated lawful intercept (ETSI ES 201 671 v.2.1.1)
2U, 19” rack mount, 3.5” (88.9mm) H x 17.4” (442mm)
W x 16” (406mm) D
20lbs (9.1kg)
OAMP+T (Web-based Interface)
Regulatory compliance (UL/CSA
60950, CSA C22.2)
Operation & Administration
EMC
Status, configuration and management GUI
Configuration change audit logging
Access and user management
SNMP V2, V3 GET, TRAPs and alarms
FCC Part 15:2009, Subpart B, CE Mark
(EN55022:2006, Class A, EM60950, EN61000, ETS
300 386)
Maintenance
Automated system upgrade
System backup, restore and copy
Extensive system status display
Multiple software version archive
Environmental
Operating temperature: 0 to +55 °C, 95% rel. hum.
non-condensing
Storage temperature: -10 to +75 °C, 95% rel. hum.
non-condensing
Designed to meet NEBS Level 3, RoHS compliant
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising