2-Fiber Detachable Dual Link DVI module, DDFX-100-TR

2-Fiber Detachable Dual Link DVI module, DDFX-100-TR
DDFX-100-TR
w w w. o p ti c i s . c o m
2-Fiber Detachable Dual Link DVI module,
DDFX-100-TR
Descriptions
New optical dual link DVI extender, DDFX-100-TR is
designed compact enough for its transmitter and receiver
to be directly plugged to your PC and displays. The
DDFX-100 with the same mechanical dimension for each
of transmitter and receiver enables to transparently
transmit the digital uncompressed video data of dual link
DVI, WQXGA (2560x1600) at 60Hz or WQUXGA
(3840x2400) at 33Hz refresh ratio using leading-edge
OPTICIS technology that transmits seven (7) data
channels over two (2) LC multi-mode fibers.
Key Features
• Designed in a thin and sleek shape with metal enclosure
so as to directly hook up the PC or display.
• Supports up to WQXGA (2560x1600) @60Hz or
WQUXGA (3840x2400) @33Hz.
• Transmits signal up to 500m over two (2) LC multimode fibers.
• Provides Self-EDID management, emulating the EDID
in the transmitter.
• Supports wide operating temp. range, 0-50 degree.
• Provides indicators; Power-on and Status (signal
transmission and EDID learning) in the Tx, and Power-
At such data bandwidth, DDFX-100 can extend up to
500 meters (1,640feet) much over the limits of copper
wire extension, without any distribution amplifier or
repeater. The transmitter is powered either through the
DVI pin from the PC or by a +5V power adaptor with an
on and Status (Signal detection) in the Rx.
• Size: 39mm x 72mm x 15mm (W x D x H)
• Supports Auto-power switching function n in the Tx.
• Certifications: CE / FCC, Class 1 Laser Eye Safety
auto-power switching circuit. The receiver needs a +5V
power adaptor to drive.
Applications
For better installation flexibility, an unique patent
pending feature so called as Self-EDID management is
•
Medical imaging system
implemented in the transmitter to which is emulated the
•
Video wall / Control room
EDID in the display by just plugging the transmitter to it
•
Film production and editing
before installation.
•
Military / Aerospace
DDFX-100-TR
w w w. o p ti c i s . c o m
2-Fiber Detachable Dual Link DVI module,
DDFX-100-TR
Optical
Technical Features
WQXGA (2560 x 1600) @60Hz
Fiber Type
Multi-mode
Number of Fiber
2
Termination
LC
Distance
500m over Multi-mode fiber
Max. Resolution
WQUXGA (3840 x 2400) @33Hz
PER (500m)
< 10 at UXGA @60Hz
Bit rate
1.65Gbps / Ch
EDID
Self-EDID (Emulating the EDID in Tx)
Power Supply
Auto-switching in Tx, DC Power supply
Indicators
Power (Both), LD (Tx), SD (Rx)
Physical
Drawing Dimension [mm]
39 x 72 x 15mm (W x D x H)
Dimension
39 x 72 x 15mm (W x D x H)
Enclosure
AL die-casting
Power Level
100-240VAC, 50~60Hz 5VDC @1A
Power consumption
Tx: 1.9W, Rx:1.7W
Operating Temp.
0 ~ 50℃
Operating Humid.
10 to 85% RH, non-condensing
Connection Diagram
Connection Diagram
Up to UQXGA (2560x1600), 60Hz or WQUXGA (3840x2400), 33Hz
Up to 500m at WQUXGA (3840x2400) @33Hz
Tw
DDFX-100
Tx
o(
2)
Op
tica
lF
ibe
r
DDFX-100
Rx
Dual link DVI Source
Dual link DVI Display
OPTICIS HQ
Opticis Co., Ltd.
# 16Fl, Kins Tower
8 Sungnam-daero, 331 beon-gil,
Bundang-gu,
Seongnam-si, Gyunggi-do, 463-844
South Korea
Te l: +82 (31) 719-8033
Fax: +82 (31) 719-8032
tosales@opticis.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising