Leica iCON CC65 / CC66 Perfect construction site controllers

Leica iCON CC65 / CC66 Perfect construction site controllers
Leica iCON CC65 / CC66
Perfect construction site
controllers
i nt e l l i g e n t C O ns t r uc t i o n
Leica iCON CC65 / CC66 versatile tablet PC’s are designed to transport
a user’s office directly to the field.
The rugged, lightweight devices have a clear and easy-to-use 7” touch screen
designed to facilitate with data collection tasks on site, while at the same time
communicating with the central office, real-time data transfer is made easy! The
tablet PC’s are designed for the most demanding working environments and
protected against hazards on a construction site, allowing them to provide optimal
results in all harsh conditions. The CC65 / CC66 contains a 128GB hard drive, an
Intel® Atom™ N2600 1.6GHz Dual Core processor with 4GB DDR3 RAM, integrated
WLAN, Bluetooth®, 3G Modem, GPS and a 5M pixel digital camera. Both tablet PC’s
can be used as a handheld, mounted on a tripod, pole or in vehicle for data
collection.
Large 7” sunlight readable touch screen display for convenient operation
Windows 7 Ultimate Edition multi-lingual operating system
Various communication possibilities (Bluetooth®, WLAN, LAN, USB, RS232)
for the use with different sensors for different applications
Leica iCON CC66 model features long-range Bluetooth®
Build-in 3.5G High-speed modem for design data updates, telematics and
various other applications
Highly productive positioning work with Leica iCON build and
Leica iCON site application software
Leica iCON CC65 / CC66
Rugged, mobile tablet PC
i nt e l l i g e n t C O ns t r uc t i o n
Technology
Power Management
Processor &
Memory
Intel® ATOM™ N2600 1.6 GHz Dual Core
4 GB DDR3 RAM
Data Storage
128 GB SSD solid state hard drive
Operating
System
Microsoft Windows 7 Ultimate Edition
Screen
7” widescreen 1024x600 resolution TFT LCD, MaxView™
sunlight readable resistive touch screen display
Keyboard &
Buttons
Power key; Menu key (Controls Brightness, Volume, Battery
Status, WLAN & BT On/Off, and 3G On/Off); 4+1 Navigation
keys (Left, Right, Up, Down, OK for Enter); 3x user programmable hotkey buttons that control up to 6 functions; On-screen
QWERTY soft keyboard
I/O Ports
2x USB 2.0; 1x Gigabit LAN; 1x DC power input; 1x 9 pin series
RS232; Docking connector (Contact pin type); 1x audio out;
1x microphone in; integrated speaker
Communication
Integrated
Communication
Modules
3G Module - GOBI 3000 communication module, Quad-band
HSPA+, Quad-band GSM/GPRS/EDGE;
Wireless LAN 802.11 b/g/n; Bluetooth® 2.1/4.0;
Integrated u-blox®GPS; Bluetooth® Long-range module*
Integrated GPS
Integrated u-blox®GPS, WAAS/EGNOS/MSAS capable1)
GPS Real-time Accuracy (WAAS, EGNOS)2): 2–5 m
Integrated
Camera
5 Megapixel camera + LED light
1)
2)
3)
WAAS available in North America only, EGNOS available in Europe only.
May vary due to atmospheric conditions, multipath, obstructions, signal geometry
and number of tracked satellites.
In continuous field operation mode, may vary with temperature, battery age etc.
Leica iCON
site/iCON
build
Easy-to-use
construction
field software.
Designed for
construction
workers.
Batteries
Dual Li-polymer battery pack, 5.2 Ah fast Hot Swappable,
support at least 6 hours of operation w/ default backlight level,
based on battery mark test (2x 2.6 Ah batteries)
Power
Input: 120-240 VAC, 50-60 Hz, 12 VDC output
Operating Time
8 h3)
Physical Specifications
Size
144 mm (5.56”) x 242 mm (9.5”) x 40 mm (1.57”)
Weight
1.1 kg (2.42 lbs) including all-day batteries
Water
IP65, IEC60529
Altitude
4572 m (15.000 ft) at 30 °C (86 °F)
Operating
Temperature
Range
-33 °C (-27,4 °F) to +63 °C (145,4 °F)
MIL-STD-810G, Method 501.5 Procedure II, MIL-STD-810G,
Method 502.5, Procedure II
Storage
Temperature
Range
-40 °C (-40 °F) to +71 °C (159,8 °F)
MIL-STD-810G, Method 501.5 Procedure I, MIL-STD-810G,
Method 502.5, Procedure I, III
Humidity
95% RH temp cycle 30 °C (86 °F) /60 °C (140 °F)
MIL-STD-810G Method 507.5
Drop
Free to concrete 26 drops from 1.2 m (3,94 ft)
MIL-STD-810G, Method 516.6, Procedure IV.
Vibration
General minimum integrity and the more rigourous loose cargo
test, MIL-STD-810G, Method 514.6, Procedure I, II;
(Comparable Leica requirement: 10 to 150 Hz, ±0,15 mm, 2g,
20 cycles, 1 octave/min within the storage temperature range)
Accessories
External battery charger, Hard carry case, 12 V vehicle charger,
Pole mount solution, Anti-glare screen protectors, Additional
5200 mAh battery
* Only included in the CC66 package.
Leica iCON
gps 60
Versatile
SmartAntenna
for multi-purpose
positioning
tasks.
Leica iCON robot 60
One-person operation,
saving time and
increasing productivity
when carrying out
layout tasks and
as-built checks.
Leica Builder
Intuitive, powerful
and scalable manual
total station series
for routine
construction tasks
on site.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Leica Geosystems AG is under licence. Windows and Windows CE
are a registered trademark of Microsoft Corporation. All other trademarks and trade
names are those of their respective owners.
Illustrations, descriptions and technical data are not binding. All rights reserved. Printed in Switzerland –
Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2014. 821484en – 04.14 – galledia
Leica Geosystems AG
Heerbrugg, Switzerland
www.leica-geosystems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising