Cat.6A Connecting Hardware ISO/TIA Class EA / Cat.6A

Cat.6A Connecting Hardware ISO/TIA Class EA / Cat.6A
Class EA/Cat.6A 24P Patch Panel (Auto press-fit)
Class EA/Cat.6A Coupler
LA246ASTX STP 90º Patch Panel
TA196BUS/TA196BDS/TA196BSS
• Qualified Screened Class EA /Cat.6A (10G/500MHz)
Cat.6A Connecting Hardware
ISO/TIA Class EA / Cat.6A
Press-fit Technology
• Slim and compact, available for 24 ports patch panel.
• Complied with IEC 60603-7-51
• Supply extension solution.
• ISO/IEC 11801 2.2 Edition
• Provide excellent headroom for NEXT.
• CENELEC EN 50173-1:2011
• ANSI/TIA-568-C.2
Cat.6A
Auto
Press-fit
Raised metal tray
improves better contact
resistance and transfer
impedance.
Cat.6A
RoHS
Press-fit process.
100% RoHS compliant,
without soldering.
Metal cover and hinge
design for better EMC.
Patented
RoHS
VERIFIED
Cave-type design for
better EMC.
JB246AUC UTP 180º Patch Panel w/cable management
Special contact fingers to
press modular plug's
metal, reducing the
contact resistance and
transfer impedance.
Double arcs metal clip for
increasing metal strength
and flexibility.
Cutout size 19~20mm.
Patented “spider” design,
and contact pins for
reducing crosstalk
between two Jacks.
Tiny dimension, it fits in
various face plates and
wall plates.
Patented of spider contacts for reducing crosstalk
Compliance Statement
Screened Category 6A
Applied Permanent Link Configuration
Cat.6A
Auto
Press-fit
ISO/IEC, EN & TIA Connecting Hardware
Telebox Identification P/N TB87A2Sx
Category 6A, Screened, Keystone Jack
Electrical Transmission Performance
RoHS
Telebox Industries Corp.
4F, No. 306, Tatung Road, Sec. 1
Hsichih-Taipei 221, Taiwan, R.O.C.
Copper Cabling Technology
Plugs / Patch Cords
Keystone Jacks
IDC block cover to secure
terminated wires.
Using Krone/110 tool.
Accepts AWG 23-26 solid
and stranded cables.
Press-fit process.
100% RoHS compliant,
without soldering.
Cable Management (CMP1).
Easy assembly.
Compliance Statement No. 114835
This Screened ISO/IEC, EN & TIA Connecting Hardware, having board identifications "001-87621" and "001-87622",
has been tested by 3P Third Party Testing and complies with the Category 6A transmission requirements of edition 2.2
of ISO/IEC 11801, CENELEC EN 50173-1:2011 and IEC Connecting Hardware Standard 60603-7-51, and Category 6A
transmission requirements of ANSI/TIA 568-C.2. Testing is conducted as specified in IEC Test Standard 60512-27-100
and ANSI/TIA 568-C.2. Requirements are passed using the complete specified re-embedded range of RJ 45 plug vectors.
The qualification activity includes factory and assembly line inspection. The Compliance Statement may be suspended
or withdrawn if the keystone jack fails to pass a Maintenance Testing performed at 12 month intervals.
Hoersholm, 23rd May 2014
Ole Lambertsen
Test Responsible
Hoersholm, 23rd May 2014
Poul Villien
Coordinating Manager
Independent Testing - For End User Confidence
Couplers
4F, No. 306 Tatung Road, Sec. 1, Hsichih-Taipei 22146, Taiwan
Tel : +886-2-26429337
Fax : +886-2-26425779
E-mail: sales@telebox.com
http ://www.telebox.com
Patch Panels
Outlets
©2014.05.31 Telebox Industries Corp. All Rights Reserved.
h t t p : / / w w w. t e l e b o x . c o m
Class EA/Cat.6A 180° Keystone Jack
Cat.6A Connecting Hardware 90° Die-Cast Keystone Jack
Cat.6A
Auto
Press-fit
Patented
RoHS
TB916AUD UTP Keystone Jack
TB97A2DD
Cat.6A STP/UTP Field Modular Plug
TA336A-DS STP RJ45 Plug
- Field assembly RJ45 STP plug for
Patented contact support
can resist RJ11/ RJ12 for
200 insertions.
- Qualified Screened Cat.6A Connecting Hardware
- Complied with IEC 60603-7-51
Tool free, press with click to
terminate wires.
stranded cable AWG 24-27/7.
Smart design easy to
dismount.
- Provides exceptional ANEXT in Cat.6A
Connecting Hardware performance.
- ISO/IEC 11801 2.2 Edition
- CENELEC EN 50173-1:2011
- Flexibility and multicolored identification.
- ANSI/TIA-568-C.2
- RoHS compliant.
Re-
Embedded
Cat.6A
Auto
Press-fit
Patented
Patented
RoHS
Cable End A
“Y”-Shape
Cable End B
TB906ADD Die-Cast Keystone Jack
Compliance Statement
“I”-Shape
Patented contact support
can resist RJ11/ RJ12 for
200 insertions.
IDC contacts: IDC layout
for better crosstalk
performance.
Patented metalized organizer to Cat.6/Cat.6A component
performance.
360° Braided cover, provide
better EMC, contact
resistance and transmission.
Re-
Embedded
360° Braided Cover: provide
better EMC, contact
resistance and transmission.
IDC contacts: IDC layout for
better crosstalk
performance.
For AWG 23-26 solid wire.
Main board & daughter
board technology.
Unique design can resist
RJ11/ RJ12 for 200
insertions.
Wire management, easy
to separate the wires and
change pair sequence
and not tangle the wires.
Cat.6A Connecting Hardware 90° STP Keystone Jack
TB87A2SD
- Qualified Screened Cat.6A Connecting Hardware
Embedded
Cat.6A
Auto
Press-fit
Patented
RoHS
- Complied with IEC 60603-7-51
- ISO/IEC 11801 2.2 Edition
- CENELEC EN 50173-1:2011
Copper braid can be fully
contacted and covered
for AWG 23-26 solid wire.
- ANSI/TIA-568-C.2
Robust shield cover
geometry for better
contact resistance
and transfer
impedance.
IDC Cap: easy to
separate and change
pair sequence and
not tangle the wires.
Compliance Statement
Screened Category 6A
ISO/IEC, EN & TIA Connecting Hardware
Telebox Identification P/N TB87A2Sx
Category 6A, Screened, Keystone Jack
Electrical Transmission Performance
Telebox Industries Corp.
4F, No. 306, Tatung Road, Sec. 1
Hsichih-Taipei 221, Taiwan, R.O.C.
Compliance Statement No. 114835
This Screened ISO/IEC, EN & TIA Connecting Hardware, having board identifications "001-87621" and "001-87622",
has been tested by 3P Third Party Testing and complies with the Category 6A transmission requirements of edition 2.2
of ISO/IEC 11801, CENELEC EN 50173-1:2011 and IEC Connecting Hardware Standard 60603-7-51, and Category 6A
transmission requirements of ANSI/TIA 568-C.2. Testing is conducted as specified in IEC Test Standard 60512-27-100
and ANSI/TIA 568-C.2. Requirements are passed using the complete specified re-embedded range of RJ 45 plug vectors.
The qualification activity includes factory and assembly line inspection. The Compliance Statement may be suspended
or withdrawn if the keystone jack fails to pass a Maintenance Testing performed at 12 month intervals.
Hoersholm, 23rd May 2014
Ole Lambertsen
Test Responsible
Hoersholm, 23rd May 2014
Poul Villien
Coordinating Manager
Independent Testing - For End User Confidence
Spring loaded metal finger
for contact resistance.
Main board & daughter
board technology.
Patented
RoHS
Patented
TB806ASD/TB806AUD Keystone Jack
Compliance Statement
Re-
Cat.6A
- Shield fingers for better contact resistance and transmission.
- IDC layout for better crosstalk performance.
- Unique design can resist RJ11/ RJ12 for 200 insertions.
- Double arcs metal clip for
increasing metal strength and
flexibility.
TA336A-DU UTP RJ45 Plug
- Field assembly RJ45 UTP plug for AWG 23-24/1 and AWG 24-27/7.
- Provides exceptional headrooms for Cat.6A Connecting Hardware performance.
- RoHS compliant.
Re-
Embedded
Cat.6A
Patented
RoHS
Patented metal clip.
Automatically pressing IDC and Contacts into PCB
Advantages of Press-fit Connectors:
- Stable and reliable form of the contact
- Time-saving production
- Cost effective, no manual soldering
- Environmentally friendly
- Reduced inspection process
Cable End A
Patened
Cable End B
“Y”-Shape
“I”-Shape
Patented metalized organizer to Cat.6/Cat.6A component
performance.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising