CABLE AND NETWORK MANAGEMENT TOOL For Network

CABLE AND NETWORK MANAGEMENT TOOL For Network
TM
CABLE AND NETWORK MANAGEMENT TOOL
For Network Managers & Technicians
Monitor Network Health
Manage Moves & Changes
Identify Cable & Network Problems
Optimize Performance
TM
WHY PingerPro
Network Test Features
Cable Test Features
Link Tests
• Verify Link Connection
• Identify Port Speed (10/100/1000baseT) and
Duplex
• Selectable Speed/Duplex or Auto-negotiation
Cable Length and Fault Location
• Measures the Length of Each Wire Pair
• Provides the Distance to Open or Short Cable
Faults
Thousands of network professionals have
relied on Psiber test tools for installing,
troubleshooting and maintaining complex, high
performance networks.
Ping Tests
• Verify Connectivity across a Network or the
Internet
• Measure Packet Round Trip Time
• Count Packets Received, Lost or Corrupted
The PingerPro’s extensive features make it
even easier for managers and technicians
to meet the growing challenges of cable and
network management.
Configurable Ping Test
• Single, Continuous or Burst of Ping Packets
• IPv4 or IPv6
• Packet Payload Size
Installing new network drops or devices,
monitoring performance or troubleshooting
problems, the PingerPro quickly provides
THE ANSWERS YOU NEED:
•
•
•
•
•
•
•
•
•
•
•
•
Is this cable wired correctly?
Where is a cable fault located?
Is this wall outlet connected?
What speed and duplex do I need to set to
be compatible with the far end device?
What port on a switch is connected to the
outlet that I am testing?
How is the connected switch port
configured?
Is my MAC address registered?
Are the DHCP and DNS servers available?
Can I connect to servers and the Internet
with IPv6?
Can I connect over copper or fiber links?
Is this patch cable good?
How can I document test results?
The PingerPro touch screen interface lets you
select discrete tests, or a configurable AutoTest
that provides critical Link information; conduct
network connectivity tests and provide switch
port information in seconds. The PingerPro
provides critical, clear and easy to read
answers.
Document your test results with a few
keystrokes, to prove the job’s done right. The
rechargeable battery pack and rugged weather
resistant design, lets you test anywhere. The
PingerPro is always available, always ready to:
• Monitor network health
• Manage network changes
• Identify cable and network problems
• Optimize network performance.
Port ID
• Flashes the Link LED on a Connected Switch
Port
Tone Generator for Cable Tracing
• Generates 5 Different Selectable Tones for
Tracing Cables
• Optional CableTracker Probe (CT15) Available
for Cable Tracing
Trace Route
• Show Packet Route across a Network or the
Internet
Device Emulation
• MAC Cloning/Spoofing
Human-Centered Design Features
• Rugged Weather Resistant Case
• Rechargeable Li-ion Battery
• Color Touch Screen Interface
• Cable Management Brackets
• Tilt Stand
• Built-in Help Screens
• Multiple Language Support
Switch Port Information
• Supports Link Layer and Cisco Discovery
Protocol (LLDP/CDP)
• Provides Port Speed and Duplex, VLAN,
Switch Model, Port Number and More
(Note: Information Varies by Manufacturer and
Switch Model).
AutoTest
• Performs Selected Tests in Seconds
• Allows Rapid Testing of Large Numbers of
Ports
• Saves Test Results Quickly with Automatic File
Naming
• Store up to 1000 Tests
Security
• IEEE 802.1x Port-based Network Access
• Provides User Name and Password
Authentication (EAP-MD5)
Additional Test Features for PRO75
• Test Fiber Links
• Verify Connectivity over Multimode (850nm)
and Single Mode (1310nm) Links
• 1000BaseX
• Optional 100baseFS
Optical Power Meter
• Measure Received Optical Power Levels
PingerPro Tools
PC Based Software
• Download Test Results to Review and
Generate Professional Reports
•Install Firmware Updates
SPECIFICATIONS: Model PRO70 & PRO75
Dimensions 6.5 in. x 4.0 in. x 2.8 in.
165 mm x 102 mm x 71 mm
Weight 13.2 oz.; 387 grams
AC Power Adaptor 110/240 VAC
Graphics Display Interface Power Operating Temp Storage Temp 320 x 240 x RGB
Color Touch Screen
Li-Ion Battery Pack 32°F to 122°F / 0°C to 50°C
14°F to 131°F / -10°C to 55°C
2.00”
3.30”
6.640”
The PingerPro brings a new level of
connectivity testing with: fault location, Gigabit
Ethernet capability, advanced IPv6 support,
Logical Link Data Protocol (LLDP/CDP) and
a powerful feature set that you will use every
day. As a result, the PingerPro is the complete
high performance first-response-tool, designed
to solve your most frequent network problems.
Wire Map
• Graphical, Color Display of Wire Connections
• Identifies Opens, Shorts, Mis-wires and Split
Pairs
• Measures all Pin Pair Combinations for
Highest Accuracy
Learn more at: www.psiber.com/pingerpro
Psiber Data Systems Inc. 7075-K Mission Gorge Road San Diego, CA 92120 Tel: 619 287 9973.
PingerPro is a Trademark of Psiber Data Systems Inc.
© 2014 Psiber Data Systems Inc. All rights reserved. Rev1.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising