802.11b/g/n Long Range Wireless Outdoor AP/ CB

802.11b/g/n Long Range Wireless Outdoor AP/ CB
ENS202EXT
Key Features
‧IEEE 802.11 b/g/n compliant
‧Up to 300Mbps (2.4GHz)
‧24V Proprietary PoE support
‧Detachable 2.4GHz 5dBi omni antennas
‧AP/CB/CR/WDS/Repeater Modes
‧Multi-SSIDs with VLAN tagged
‧VLAN tag pass-through via the WDS BR mode
‧Web Configuration and EZ controller software
‧SNMP V1/ V2c/V3, MIB I/II supported
‧WEP/WPA/WPA2 wireless encryption
‧IPv4/IPv6 support
‧Effective and flexible bandwidth management
802.11b/g/n Long Range Wireless Outdoor AP/
CB
EnGenius Outdoor Long Range CPE designs High Power, High Sensitivity and Strong
Reliability Solutions under Harsh Environment.
ENS202EXT engineered with the powerful independent RF interface that offers bandwidth up to 300Mbps on
2.4GHz band for accommodating heavy traffic services. The high-efficient 5dBi Omni-directional antenna
provides an optimal, widely, extended real outdoor throughput performance in long range distances.
ENS202EXT
Multiple Operation Modes
Besides the current operating modes on the Access Point, Client Bridge, Client Router and WDS Modes,
EnGenius configured the Repeater mode and the AP function under the CR mode for achieving the greater
coverage, reducing the maintenance fee and flexible application for the various environment.
Effective Management
ENS202EXT integrated with Network Management Software “EZ controller” can offer variety uses in constructing
scalable wireless network of all possible application and also allow centralized management via user-interface.
ENS202EXT provides wide-range of authentication and encryption standards (including WEP, WPA, WPA2,
TKIP/AES and IEEE 802.1X) to enforce the maximum security. Along with Proprietary PoE support excellent
long-range network installation when used in conjunction with its outdoor family – ENH220EXT, ENH710EXT
and ENH900EXT.
Antennas and Physical Interface
1
2
5
SMA Connector
1
2
Detachable 2.4GHz 5dBi Omni Antennas
4
3
Physical Interface
3
Fast Ethernet Port with PoE Input
4
Fast Ethernet Port
5
Reset Button
Specification
Wireless Radio Specification
‧ 2.4GHz 802.11b/g/n
- Max 300Mbps
‧Transmit Power (Maximum Value)
- 2.4GHz: Max 26dBm
- Maximum power is limited by regulatory power
‧Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum(DSSS)
- 802.11n: Orthogonal frequency-division multiplexing
(OFDM)
- 802.11n with 20/40 MHz channel width
- 802.11b/g with 20 MHz channel
‧Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
‧Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11g: 6, 9, 12, 18, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
Power
‧Power Source:
- 24V Proprietary compliant source
- Active Ethernet (Power over Ethernet, PoE)
‧Power Consumption:
- Maximum 7.2W
Antennas
‧Two detachable high gain antennas
- Detachable 5dBi 2.4GHz antennas
‧Omni-Directional type
- Provide the optimal coverage
‧Compliant with SMA type connector
Interface
‧Two 10/100 BASE-T Ethernet Port
- One port supports 24V proprietary PoE input
- One port supports the extension of internet signal
‧One reset button
Mechanical & Environment
Dimensions / Weight
- 186mm (L) x 100mm (W) x 29mm (H)
- 300g
- Unit, without mounting kit and antennas
‧Operating:
- Temperature: -20°C~70°C
- Humidity: 0%~90% typical
‧Operating:
- Temperature: -20°C~70°C
Humidity: 0%~90% typical
‧Storage:
- Temperature: -30°C~80°C
RF Specification (Aggregated Value)
‧Harsh Environment Use:
- IP65 rated
Operation Mode
‧Access Point / Client Bridge / Client Router / WDS /
Repeater:
- A variety of operation modes to serve multiple
constituencies and applications.
- Enable the AP function under the CR mode for flexible
application
Easy to Management
‧Auto Channel Selection
- Setting varies by Regulatory Domains
‧SSIDs:
- BSSID support
- Multi-SSIDs (4 SSIDs)
‧SNMP &MIB
- v1/v2c/v3 support
- MIB I/II, Private MIB
‧VLAN Tag:
- Independent VLAN setting can be enable or disable
- Any packet that enters the Device without a VLAN tag
will have a VLAN tag inserted with a PVID (Ethernet
Port VID)
‧VLAN Pass-through:
- VLAN pass through over WDS bridge
‧Clients Traffic Status:
- Reports the various main information timely which is
required by administrator
‧ QoS
- Complaint on IEEE 802.11e standard
‧RADIUS Accounting:
- Help operators to offload 3G to the wi-fi seamlessly
Effective Control and Use
‧ CLI Comments Support
- Setting varies by Regulatory Domains
‧Distance Control (Ack Timeout)
‧Multicast Supported
‧Wi-fi Scheduler
- Set the schedule for rebooting the device
Reinforcement Security
‧WEP Encryption-64/128/152 bit
‧WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
‧Hide SSID in beacons
‧MAC address filtering
- Filter up to 50 MACs
‧Wireless STA (Client) connection list:
- Reports the various main information timely which is
required by administrator
Transmit Power
Receive Sensitivity
(Aggregated, dBm)
(Aggregated, dBm)
1 Mbps
26.0
-95.0
2 Mbps
26.0
-95.0
802.11b 2.4 GHz
5.5 Mbps
26.0
-93.0
11 Mbps
26.0
-93.0
6 Mbps
26.0
-95.0
802.11g 2.4 GHz
54 Mbps
24.0
-77.0
6 Mbps
802.11a 5 GHz
54 Mbps
MCS 0 / 8 / 16
26.0
-95.0
802.11n HT20 2.4 GHz
MCS 7 / 15 / 23
22.0
-73.0
MCS 0 / 8 / 16
26.0
-95.0
802.11n HT40 2.4 GHz
MCS 7 / 15 / 23
22.0
-73.0
MCS 0 / 8 / 16
802.11n HT20 5GHz
MCS 7 / 15 / 23
MCS 0 / 8 / 16
802.11n HT40 5GHz
MCS 7 / 15 / 23
MCS0
802.11ac VHT20 5GHz
MCS8
MCS0
802.11ac VHT40 5GHz
MCS9
MCS0
802.11ac VHT80 5GHz
MCS9
*Maximum performance of the hardware provided. Maximum transmit power is limited by local regulatory.
*The supported frequency band is restricted by local regulatory requirements.
*Transmit power is configured in 1.0dBm increments.
Channel
Data Rate
Antenna Specifications (Internal Antenna)
Omnini-Directional Type
2.4GHz
5GHz
Average Antenna Gain
5.0dBi
-
Polariztion
Vertical
-
Azimuth Beam-Width
360°
-
Elevation Beam-Width
30°
-
1:2.0
-
13(Φ)x200(L) mm
-
VSWR
Dimension
Radiation Diagram
Network Management System - EnGenius Zone Controller
In enhancing the real-time functionality of a network, applying the best network management software tool is
necessary. Built-in Network Management System, EZ Controller (EnGenius Zone Controller), provides an
intelligent tool for IT manager, installer, and network administrators to configure control, and manage all wireless
devices within network from one central location. This application ensures the entire network will optimally
operate without troubles, glitches and interruptions.
The growing demand of performance related results from service providers or someone involved in an enterprise,
you need to provide a huge platform to make it successful. The robust design of EZ Controller can manage
different devices simultaneously and precisely, as well as configure the advanced service for wireless clients.
Configure, control and manage
EnGenius Enterprise Wireless
Devices from one central
location.
Features:
‧Easy-to-use User Interface
‧Optimize network performance
‧Eliminate downtime
‧Check real-time wireless coverage
‧Monitor and control each sheet
‧Monitor traffic loads by AP, MAC or IP address
‧Sequential firmware upgrades to deployed APs / Bridges
‧Import and archive floor-plan maps for radio coverage
plotting
‧Labels assets by MAC and IP address or user-defined
aliases
‧Export real-time AP statistics report
An intelligent solution for different business environment
Villa
Campus
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and
range can vary depending on many factors including environmental conditions,
distance between devices, radio interference in the operating environment, and mix of
devices in the network. Features and specifications subject to change without notice.
Trademarks and registered trademarks are the property of their respective owners
Copyright © 2013 EnGenius. All rights reserved.
Office
Plaza
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising