Manual 1. Get to know your camera Scene 3. Explanation of the status icons Image size Still Digital still camera Digital video camcorder 5.0 Mega pixels resolution sensor Built-in flash Light 4x digital zoom 2.7" TFT color display 32MB Nand Flash memory Lithium Battery Anti-shaking still capture PictBridge Smill capture 4. Details for camera setting 2. Functional parts 1 Function Mode selected Description Photographs mode. Video capture mode. Photo playback mode. SET 1 Shutter Button 2 Power on/off button Press this button to turn on, press again to turn off. 3 Strap Hole Hook for attaching the wrist strap to the camera. 4 Busy indicator When the indicator is blinking,the camera is busy. Microphone Record the Sound. Records the image to be taken. Note: Keep the lens clean. Dirt and fingerprints will affect the quality of the picture. Use the built-in flash to give the subject extra lighting if it is in dark surrounding（the best flash distance is recommended within 1.5m). 5 Lens 6 Flash light 7 Macro/Far switch Selected resolution 3648 x 2048H 2592 x 1944 3M pixel resolution 2048 x 1536 2MHD pixel resolution 1920 x1080H VGA resolution 640 x480 Anti-shake On / Off Anti-shaking Continue Shot On / Off Continu Shot Face Detect On / Off Face Detect Smile Capture On / Off Off/2 Seconds/5 Seconds/10 Seconds Smile Captur Exposure From +3to -3 Exposure set ISO Auto/100/200/400 Sensitivity se Auto Automatic wh White balance surrounding White balance surrounding White balance Incandescen White balance fluorescent su Sharpness se Image size Macro mode: Select this mode to take close-up photographs (distance 30cm - 45cm). 4 Flash indicator Fluorescent 12M = 4032x3024; 8M=3264x2448 5M = 2560x1920; 3M = 2048x1536; 1.3M = 1280x960; VGA = 640x480 /10s Timer Normal/Macro mode indicator 6 Photo/Video counter 8 Remaining time for shooting Zoom in 9 Zoom out 7 Sharpness Normal/Sharp/Soft Quality Supper fine/Fine/Normal VGA(640x480)/QVGA(32 0x240) On/Off/Set Date 1Minute / 3 Minutes/5Minutes/None Video size Date Auto power off Auto flash: The camera determines if the flash should be used or not. Language No flash : The flash is turned off.. 5 Cloudy Incandescent Auto/ Scenery/ Portrait/ Night Scenery/ Night Portrait/ High Sensitivity,/ Beach, Force flash: The flash is on in any environment. Press this button to take photographs. 3264 x 2448 5M pixel resolution White balance Setup 3 Scene mode 4000x3000 8 M pixel resolution Daylight Video playback mode. 2 12M pixel resolution 7MHD pixel resolution Self-Timer Item Auto/Night Portrait/Night Scenery/Portrait/Scenery/ Scene Settin Beach/High sensitivity 14M pixel resolution 4416 x 3312 Frequency Mode (0.5m – infinity). Macro mode (25cm – 40cm). Format Default setting 50Hz / 60Hz Internal Memory/ SD card format Cancel / OK Cancel Photo mode: No. of pictures had been taken. Video mode: Recording time in second. Playback mode: No. of pictures or video file. Self-Timer se Quality settin Video size se Date or time Auto power o Select displa Select power location Format the m selection. Default settin Exist Menu Note: The camera will remain the last setting when it is turned off. 5. Using the camera 8 LCD screen Normal mode: Select this mode to take photographs from 0.5m - infinity. Display photographs, video clips, camera setting and menu. 9 Multi-fuction(A) Press this button to digital zoom in. 10 Zoom out 10 Multi-fuction(B) Press this button to digital zoom out. 11 Battery indicator 11 Left / Scene Press it to enter scene menu. 12 Right / Playback Press it to enter playback mode. 12 SD card inserted 13 Menu Button Press it to enter camera setting mode. 14 Up/Flash Press it to enter flash mode. 13 alert-anti-shaking 15 Down/Video Mode 14 Exposure value Show EV±value. 16 USB inside 15 ISO Sensitivity select. 17 SD card slot Press it to start/stop recording video. Via this connection, you can download photographs and video clips to a computer. SD card storage location. 18 Battery door Door for battery. 16 Picture quality Zoom in icon Zoom out icon The battery is full. 5.1 Installing the battery 1. 2. 3. Open the battery door. Insert Lithium battery into the camera. Close the battery door. The battery is empty. Alert user to hold the camera steadily.-on/off Super fine. Fine. Normal. 5.2 Inserting a memory card (not included) This camera has built-in internal memory. This memory can be extended w (not included). Follow the instructions given below to insert the optional SD memory card i 1. 2. Turn off the camera first. Insert the SD card into the camera. Note: There is only one right direction to insert the SD memory card into the slot. Do not force the card into the slot, or else it may damage both the camera and the SD memory card. Note: The SD memory card must be formatted before taking photographs. See the following sections for more information. 5.8 Turn on the camera. 2. For setting the resolution, Press MENU button and select setup menu, then press the up or down button to select the Video Size icon,the press MENU button to comfirm. Two resolution will be displayed. VGA (640 x 480) QVGA( 320 x 240). Press the DOWN button to start recording video, press the DOWN button again to stop recording. The video clip will now be saved as an AVI file in the camera memory. 3. 5.9 1. 2. 3. 4. 5.3 Formatting the memory or SD card Formatting SD card will delete all information in SD card. 1. Turn on the camera ,press the menu button in PHOTO mode. 2. Select the setup mode by press the right or left button. 3. Select the format icon by press the up or down button and press the Menu button to confirm. 4. Select OK icon by press the up or down button and press the Menu button to confirm. 5. Press up or down button to select yes icon and press the Menu button to confirm. 5.4 Setting the Image Size The camera can be set to different resolutions. 1. Press the menu button in PHOTO mode, select the Image Size icon by right or left key and press the up or down butto to select the resolutions. 2. 8 different resolutions will be displayed. Select the desired resolution by using the up or down buttons and press the Menu button to confirm the selection. 5.5 Taking photographs 1. 2. Turn on the camera. Depending on the distance to the object being photographed, use macro switch to adjust the distance. Select the flower symbol ( ) if you wish to take a close-up photograph (30cm –45cm). If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the macro switch to normal mode ( ). 3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing the up(flash) button. (If the battery power is too low, the flash won’t be activated). 4. Use the LCD screen to aim the object you wish to take photograph. Use the face detection to aim the people you wish to take photograph. 6. Press SHUTTER button and wait until the LCD display turn on again. 7. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is detected Caution: 1) Taking picture for fast-moving object is not recommended. 2) Image may be distorted when taking picture in a moving vehicle. 5.6 5.10 Playback video clips 1. 2. 3. 4. Self-timer setting You can use the self-timer function when you wish to take a photograph for yourself or when you wish to take a photograph for an object which the camera must be as still as possible. 1. Set the camera to photo mode. 2. Press the MENU button. The menu will appear. 3. Press the Right or Left button to select Self Timer menu . 4. Press the up or down button to set the delay time: Off/2seconds/5seconds/10seconds. 5. Press the MENU button to confirm. The self-timer function is now ready for use. 6. Aim at the object you wish to take photo. 7. Press the SHUTTER button to take a photograph. 8. The photo will be taken after the timer reaches the delay time that you pre-setted and the self timer LED indicator will flash 2, 5 or 10 seconds ( per you selection) until the photo is taken. 8. System requirement CPU Windows XP / Vista or above Mac 10.5.x or later Pentium III or above RAM At least 128MB Interface USB port CD 4x speed CD ROM or above Operating system Playback photographs Press the RIGHT button to get into playback mode. Press the left or right buttons to see photographs. Press the B button turn to camera mode. Press the A button to delete the image. Press the RIGHT button to get into playback mode , press the RIGHT or LEFT button to select the video and press the UP button to play and press again to stop the playback. When playing the video press right button to puse the playback. Press the B button turn to camera mode. Press the A button to delete the video. 5.11 Delete photographs and video clips You can choose to delete a single photograph / video clip, or delete all the photographs / video clips in the memory. Follow the instructions given below to delete photograph. 1. Press the RIGHT button to enter the playback mode. 2. Press left or right button to select photograph/video clip to be delete. 3. Press the MENU button and press RIGHT OR LEFT button and select Delete Icon.and select Delete This Image(Video) / All . 4. Press the MENU button to confirm. NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be deleted. 6. Connecting to a PC The unit can be connected to the computer as mass storage device and transfer photo/video files for storage. 7. Specifications Sensor Image resolution Zoom in and out Zoom in or out by pressing the Button A or Button B, a Zoom out icon will appear on the display, 4x is the maximum zoom ratio. 5.7 Recording video clips 1. Lens Focus range Macro mode Digital zoom Flash strobe LCD display White balance Video mode External memory card File format Self timer PC interface Power source 5.0 Mega pixel CMOS sensor 14 Mega pixels: (4416 x 3312) 12 Mega pixels: (4000x3000) 8 Mega pixels: (3264 x 2448) 7Mega pixels: (3648 x 2048) 5Mga pixels: (2592 x 1944) 3Mega pixels: (2048 x 1536) 2Mega pixels: (1920 x1080) VGA: (640x480) F/3.0 f = 7mm 0.5m. ~ Infinity 25cm – 40cm 4x Built-in ( Auto / force / off ) 2.7" TFT color display Auto/Daylight/Cloudy/Incandescent/Fluorescent VGA&QVGA SD card supports up to32GB Picture: JPEG, Video: AVI Off/2Seconds/5Seconds/10 seconds USB 2.0 Lithium battery 9. Troubleshooting Problem Cause S Cannot turn on the camera Low battery power. Battery placed at wrong polarities. Replace or correctly. Photos can not be saved when taking pictures. The memory card or built-in Format the m memory hasn’t been mode of the formatted properly. refer to sectio Cannot find removable disk Connection failure. after connecting the camera to the computer. Make sure al are secured computer if n Flash does not work. Battery power is too low. Please charg The photos are blurry 1. The camera is not held steadily 2. The lens of camera is dirty. 1. Hold the c it beeps w photo. 2. Clean the cloth.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project