Wyrestorm NetworkHD™ 200-Series HD Over IP Encoder and

Wyrestorm NetworkHD™ 200-Series HD Over IP Encoder and
WYRESTORM PRODUCT SPECIFICATION SHEET
Wyrestorm NetworkHD™ 200-Series HD Over IP
Encoder and Decoders for video wall
NHD-200 Series
Key Features:
• Highly scalable, visually lossless solution using the most efficient compression technologies
to allow for very large commercial AV deployments
• Plug n’ Play setup with quick networking configuration and auto discovery of components
• Quick Sync™ technology for virtually instantaneous seamless switching
• Full RS232 control of connected displays and CEC One-Touch Play
• Major control systems drivers available including the WyreStorm Enado™ Control System
The NetworkHD™ 200 series solution is WyreStorm’s matrix-based HD over IP AV distribution platform. With its simple system
configuration and robust feature set, it provides the best value in networked video distribution, without compromising quality.
Additional Features & Benefits:
• Supports video previewing on a PC or third party device.
Capable of outputting two simultaneous IP streams. One large
IP stream supports a streaming resolution from 480p @ 60Hz
to 1920 x 1200 @ 60Hz to view a video on the decoder. The
other small one supports resolutions of 352 x 288 @ 5Hz to
easily preview a video from the encoder on a PC or Mac
• Use with the new NetworkHD controller (NHD-000-CTL) for
matrix control and management via the LAN, as well as for
allowing control from third party control system such as AMX,
Crestron, Control4, RTI & Enado.
• Supports PoE to be remotely powered by compatible power
source equipment, eliminating the need for a nearby power
outlet
• Standards-based H.264/MPEG-4 AVC video compression
• Full PC control suite available free of charge at wyrestorm.com
• Supports HDCP
• Supports the H.264 features baseline profile, main profile and
high profile
• Auto input format detection
• Configurable encoding bit rate up to 40 Mbps
• Supports PoE for remote powered from the switch, eliminating
the need for a nearby power outlet
• Supports AutoIP, zero-configuration networking (zeroconf),
a set of technologies that automatically assigns dynamic IP
addresses to the Encoder on start-up and a server-less method
of choosing IP addresses
in the box
NHD-000-CTL
1 x NHD-000-CTL Main Unit
1 x Power Adapter (12V 1A DC)
1 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
5 x IP labels
NHD-200-TX
1 x NHD-200-TX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
1 x HDMI to DVI Converter
2 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
NHD-200-RX
1 x NHD-200-RX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
3 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
US OFFICE:
EMEA OFFICE: TEL: +1 518-289-1293
TEL: + 44 (0) 1793 230 343
NHD-210-RX
1 x NHD-210-RX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
3 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
WYRESTORM PRODUCT SPECIFICATION SHEET
Specifications
NHD-200-TX
Input Video Ports
1 × DVI IN
Input Video Resolutions
HDMI: 640 x 480 @ 60Hz, 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz,
Input Video Type
HDMI, DVI 1.0, VGA, YPbPr, CVBS
800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz,
1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz,
1366 x 768 @ 60Hz, 1400 x 1050 @ 60Hz, 1440 x 900 @60Hz,
1680 x 1050 @ 60Hz, 1080i @ 50Hz, 1080i @ 60Hz, 1080p @ 24Hz,
1080p @ 25Hz, 1080p @ 30Hz, 1080p @ 50Hz, 1080p @ 60Hz,
1920 x 1200 @ 60Hz
DVI:
640 x 480 @ 60Hz, 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576P @ 50Hz,
800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz,
1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz,
1366 x 768 @ 60Hz, 1400 x 1050 @ 60Hz, 1440 x 900 @ 60Hz,
1680 x 1050 @ 60Hz, 1080i @ 50Hz, 1080i @ 60Hz, 1080p @ 24Hz,
1080p @ 25Hz, 1080p @ 30Hz, 1080p @ 50Hz, 1080p @ 60Hz,
1920 x 1200 @ 60Hz
VGA:
640 x 480 @ 60Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 1280 x 1024 @ 60Hz,
1280 x 720 @ 60Hz, 1280 x 768 @ 60Hz, 1280 x 800 @ 60Hz, 1360 x 768 @ 60Hz,
1366 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1400 x 1050 @ 60Hz,
1680 x 1050 @ 60Hz, 1920 x 1080 @ 60Hz, 1920 x 1200 @ 60Hz
YPbPr: 720 x 480i @ 60Hz, 720 x 480p @ 60Hz, 720 x 576i @ 50Hz, 720 x 576p @ 50Hz,
1280 x 720p @ 50Hz, 1280 x 720p @ 60Hz, 1920 x 1080i @ 50Hz,
1920 x 1080i @ 60Hz
CVBS: 480i @ 60Hz, 576i @ 50Hz
Input Video Signal
0.5 ~ 1.2 V p-p
Encoding Data Rate
Up to 30 Mbps, configurable
Output Video Type
H.264/MPEG-4 AVC
Video Impedance
100 Ω
End-to-End Time Latency
About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)
Input Audio Format
Stereo
Output Audio Format
Stereo
Operating Temperature
+32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing
Output Video Ports
Output Video Resolutions
Input DDC Signal
Input Audio Ports
Output Audio Ports
Control Method
1 x LAN
Large IP stream: 480p @ 60Hz ~ 1920 x 1200 @ 60Hz, Small IP stream: 352 x 288 @ 5Hz
5 V p-p (TTL)
1 x Audio Jack
1 x Phoenix Connector
Rear panel source switch, PC configurator and RS232
Storage Temperature
-4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
Power Consumption
6W (Max.)
Power 12V 1A DC
ESD Protection
Human body model: ±8kV (air-gap discharge) ±4kV (contact discharge)
Product Dimensions (WxHxD)
200mm x 25 mm x 94mm / 7.9’’ x 1.0’’ x 3.7’’
Certification
CE, FCC, RoHS compliant
Surge Protection
Voltage ±1 kV
Weight 0.48 Kg
For additional product information visit wyrestorm.com
For technical support contact: North America: +1 1-844-280-WYRE (9973)
EMEA/ROW: +44 (0) 1793 230 343
WYRESTORM PRODUCT SPECIFICATION SHEET
Specifications
NHD-200-RX & NHD-210-RX
Input Video Ports
1 × LAN
Input Video Resolutions 480p @ 60Hz ~ 1920 x 1200 @ 60Hz
Input Video TypeH.264/MPEG-4 AVC
Output Video Ports
1 x HDMI
Output Video TypeHDMI 1.3
Output Video Resolutions HDMI: 480p @ 60Hz, 576p @ 50Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz,
720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz,
1366 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1600 x 1200 @ 60Hz,
1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz,
1080p @ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz
Video Impedance
100 Ω
End-to-End Time Latency
About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)
Input Audio Format
Audio embedded in streaming media input
Input Audio Ports
1 x LAN
Output Audio Ports
1 x Phoenix Connector
Control Method
PC configurator and RS232
Output Audio FormatStereo
Operating Temperature
Storage Temperature
+32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing
-4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
Power 12V 1A DC
Power Consumption6W (Max.)
ESD ProtectionHuman body model: ±8kV (air-gap discharge ±4kV (contact discharge)
Surge Protection
Voltage ±1 kV
Product Dimensions (WxHxD)
228mm x 25 mm x 111mm / 9’.0’ x 1.0’’ x 4.4’’
Certification
CE, FCC, RoHS compliant
Weight0.6 Kg
P o w e r
o v e r
E t h e r n e t
Recommended transmission conditions denote cable run within specified distance range and specification of devices used, including
no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. The presence
of any of these factors may compromise bandwidth and signal strength. US OFFICE:
EMEA OFFICE: TEL: +1 518-289-1293
TEL: + 44 (0) 1793 230 343
WYRESTORM PRODUCT SPECIFICATION SHEET
Key
cat 5e/6
HDMI / VGA
Converter
Blu-Ray
Media Player
hdmi
Multi-zone
Amplifier
LINE LEVEL AUDIO
NHD-200-TX encoder
NHD-200-TX encoder
NHD-000-CTL
NHD-200-rX Decoder
Control
system
P o w e r
o v e r
E t h e r n e t
NHD-210-rX Decoder
NHD-210-rX Decoder
NHD-210-rX Decoder
NHD-210-rX Decoder
For additional product information visit wyrestorm.com
For technical support contact: North America: +1 1-844-280-WYRE (9973)
EMEA/ROW: +44 (0) 1793 230 343
0615
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising