FiberReach II Rack Mount
Quick Installation and Setup Guide
FiberReach II Rack Mount
®
Single Forward Mount
Single Reverse Mount
2
2
1
1
2
2
3
3
1
1
3
4
3
4
4
4
Single Forward Mount
Single Reverse Mount
1
With the front of the FiberReach II unit facing you, secure each spacer bracket to the inner panel of the unit with
two screws. The screws should be inserted into the oval-shaped holes of each spacer bracket.
1
With the back of the FiberReach II unit facing you, secure each spacer bracket to the inner panel of the unit with
two screws. The screws should be inserted into the oval-shaped holes of each spacer bracket.
2
Secure one side bracket to the opposite panel of the FiberReach II unit. Use two screws for the rear connection
and two screws for the forward connection. Note that there are two threaded openings to use; the third opening,
which is larger and is not threaded, is used for double mounting (described below).
2
Secure one side bracket to the opposite panel of the FiberReach II unit. Use two screws for the rear connection
and two screws for the forward connection. Note that there are two threaded openings to use; the third opening,
which is larger and is not threaded, is used for double mounting (described below).
3
Secure the other side bracket to the opposite ends of the spacer brackets. Use one screw for the rear connection
and one screw for the forward connection. Note that there is only one threaded opening on either end.
3
Secure the other side bracket to the opposite ends of the spacer brackets. Use one screw for the rear connection and one screw for the forward connection. Note that there is only one threaded opening on either end.
4
Secure the entire assembly to a rack using two large rack screws (not included).
4
Secure the entire assembly to a rack using two large rack screws (not included).
Double Reverse Mount
Double Forward Mount
Inside panel of left unit
Inside panel of right unit
Inside panel of left unit
2
Inside panel of right unit
2
1
1
1
2
1
2
2
2
2
2
3
3
3
Double Forward Mount
3
Double Reverse Mount
With the fronts of both FiberReach II units facing you, turn the unit on your left so that the inside panel faces you.
Screw one dual-ended disk screw into the threaded opening within the indented circle on either end of the panel.
Now turn the FiberReach II unit on your right so that the inside panel faces you, and once again, screw one dualended disk screw into the threaded opening within the indented circle on either end of the panel. With the fronts
of both units facing you, fit the non-threaded extensions of each dual-ended disk screw into the openings in the
opposite inside panel so that the units fit together.
1
With the backs of both FiberReach II units facing you, turn the unit on your left so that the inside panel faces you.
Screw one dual-ended disk screw into the threaded opening within the indented circle on either end of the panel.
Now turn the FiberReach II unit on your right so that the inside panel faces you, and once again, screw one dualended disk screw into the threaded opening within the indented circle on either end of the panel. With the backs
of both units facing you, fit the non-threaded extensions of each dual-ended disk screw into the openings in the
opposite inside panel so that the units fit together.
2
Secure one side bracket to each outside panel of the FiberReach II units. Use two screws for the rear connection
and two screws for the forward connection.
2
Secure one side bracket to each outside panel of the FiberReach II units. Use two screws for the rear connection
and two screws for the forward connection.
3
Secure the entire assembly to a rack using two large rack screws (not included). Remember to support the center
connection of the two units until the assembly is securely fastened to the rack.
3
Secure the entire assembly to a rack using two large rack screws (not included). Remember to support the center
connection of the two units until the assembly is securely fastened to the rack.
1
November 2002
255-30-5003
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising