Gooseneck Microphones
Gooseneck
GooseneckMicrophones
Microphones
Gooseneck Microphones
HCS-1857C Series Cardioid Condenser Gooseneck Microphone
11.2
HCS-1857C13
Cardioid Condenser Gooseneck Microphone
11.2
HCS-1857C15
Cardioid Condenser Gooseneck Microphone
11.2
HCS-1857C18
Cardioid Condenser Gooseneck Microphone
11.2
HCS-1857C21
Cardioid Condenser Gooseneck Microphone
11.3
HCS-1857C24
Cardioid Condenser Gooseneck Microphone
11.3
11.4
HCS-1857A Series Tabletop Microphone Stand
HCS-1857A
Tabletop Microphone Stand
11.4
HCS-1857AN
Tabletop Microphone Stand (with non-lock button)
11.5
HCS-1857AS
Tabletop Microphone Stand (with self-lock button)
11.6
11.7
HCS-1857B Series Tabletop Microphone Stand
HCS-1857B
Tabletop Microphone Stand
11.7
HCS-1857BN
Tabletop Microphone Stand (with non-lock button)
11.8
HCS-1857BS
Tabletop Microphone Stand (with self-lock button)
11.9
11.1
11.1
Gooseneck Microphones
HCS-1857C Series Cardioid
Condenser Gooseneck Microphone
Technical Specifications
Electrical
Element
Electret condenser microphone
Cardioid unidirectional
Polar pattern
-40 dBV/Pa
Sensitivity
30 Hz~20 kHz
Frequency response
80 Hz, -18 dB/Max
Low-frequency attenuation
280 Ω
Output impedance
139 dB, THD<1%
Maximum sound pressure
>90 dB
SNR
11 V~ 52 V DC, 2 mA
Phantom power requirements
Flat,low frequency attenuation
Switch
3-pin XLRM-type connector
Output connector
Mechanical
Dimensions
HCS-1857C13: 330.2 mm – long
HCS-1857C15: 381.0 mm – long
HCS-1857C18: 457.2 mm - long
Head diameter: 12.0 mm
HCS-1857C13: 146 g
Weight
HCS-1857C15: 150 g
HCS-1857C18: 156 g
Features
foam windscreen
Accessory
■ Stylish and ergonomic design
■ For quality sound reinforcement, professional recording,
television, conference and other demanding sound pickup
Polar pattern
applications
■ The small diameter double-gooseneck design permits
highly flexible positioning while maintaining a smooth,
wellcontoured appearance
■ An included snap-on foam windscreen effectively reduces
wind and pop noise
■ Uni-directional electret condenser microphone
■ Excellent immunity to RF interference from mobile phones
and comparable devices
■ Built-in
microphone
power
supply
and
amplifier
components can be powered from any external 11 V to 52 V
DC phantom power supply
Frequency response
■ Flat frequency response when switch is set to "―" position.
When switch is set to "
” position the built-in high-quality
low-frequency attenuation circuit cuts-off at 80 Hz, reducing
airflow noise when speaking close to the microphone.
Reduces pick-up of low-frequency ambient noise (such as
traffic, air-conditioning system, etc.), room echo and the
sound of mechanical vibrations
■ Simple and rapid installation. The microphone terminal is a
standard 3-pin XLRM-type connector, which can be
connected to any 3-pin XLRF-type socket or directly to the
Frequency(Hz)
sound mixing console
■
Low-impedance balanced audio output, audio signals
output from Pins 2 and 3 of XLRM-type connector (Pin 2 is
positive phase level, Pin 3 is negative phase level), while
Ordering Information
Pin 1 is for the ground (shield) connection
11.2
HCS-1857C13
Cardioid Condenser Gooseneck Microphone
HCS-1857C15
Cardioid Condenser Gooseneck Microphone
HCS-1857C18
Cardioid Condenser Gooseneck Microphone
Gooseneck Microphones
HCS-1857C Series Cardioid
Condenser Gooseneck Microphone
Technical Specifications
Electrical
Element
Features
■ For
quality
reinforcement,
sound
and
other
demanding
sound
pickup
280 Ω
>90 dB
SNR
Flat,low frequency attenuation
design
flexible
highly
Mechanical
positioning while maintaining
smooth,
3-pin XLRM-type connector
Output connector
diameter
permits
11 V~ 52 V DC, 2 mA
Phantom power requirements
Switch
double-gooseneck
139 dB, THD<1%
Maximum sound pressure
applications
small
80 Hz, -18 dB/Max
Low-frequency attenuation
Output impedance
television,
conference
-40 dBV/Pa
30 Hz~20 kHz
Frequency response
professional
recording,
a
Cardioid unidirectional
Sensitivity
■ Stylish and ergonomic design
■ The
Electret condenser microphone
Polar pattern
Dimensions
HCS-1857C21: 533.4 mm – long
wellcontoured
HCS-1857C24: 609.6 mm – long
appearance
Head diameter: 12.0 mm
■ An included snap-on foam
windscreen
HCS-1857C24: 166 g
effectively
foam windscreen
Accessory
reduces wind and pop noise
■ Uni-directional
HCS-1857C21: 161 g
Weight
electret
condenser microphone
■ Excellent
immunity
interference
phones
from
and
to
Polar pattern
RF
mobile
comparable
devices
■ Built-in
microphone
power
supply
and
amplifier
components can be powered from any external 11 V to 52 V
DC phantom power supply
■ Flat frequency response when switch is set to "―" position.
When switch is set to "
” position the built-in high-quality
Frequency response
low-frequency attenuation circuit cuts-off at 80 Hz, reducing
airflow noise when speaking close to the microphone.
Reduces pick-up of low-frequency ambient noise (such as
traffic, air-conditioning system, etc.), room echo and the
sound of mechanical vibrations
■ Simple and rapid installation. The microphone terminal is a
standard 3-pin XLRM-type connector, which can be
connected to any 3-pin XLRF-type socket or directly to the
sound mixing console
■
Low-impedance balanced audio output, audio signals
Frequency(Hz)
output from Pins 2 and 3 of XLRM-type connector (Pin 2 is
positive phase level, Pin 3 is negative phase level), while
Pin 1 is for the ground (shield) connection
Ordering Information
11.3
HCS-1857C21
Cardioid Condenser Gooseneck Microphone
HCS-1857C24
Cardioid Condenser Gooseneck Microphone
Gooseneck Microphones
HCS-1857A
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type socket on the rear as microphone signal
output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
Technical Specifications
3. Microphone detachment: Press the release tab of the XLR
Electrical
Input connector
Output connector
Phantom power requirements
Insertion loss
Output impedance
socket on the microphone stand and pull out the microphone.
3 pin XLRF-type
3 pin XLRM-type
24 V~ 48 V DC, 3 mA
1 dB (150 Ω input resistance)
380 Ω
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 91 x 131 mm
Weight
808 g
Color
Black
Ordering Information
HCS-1857A
11.4
Tabletop Microphone Stand
Gooseneck Microphones
HCS-1857AN
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type socket on the rear as microphone signal
output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
■
HCS-1857AN with mute (MUTE) key. When pressing the
MUTE button, the red LED indicator lights up and the
microphone is muted; release the MUTE button to activate
the microphone again. The MUTE key can be repeatedly
3. Microphone detachment: Press the release tab of the XLR
pressed to freely control the microphone. The attenuation
socket on the microphone stand and pull out the microphone.
value is 55 dB at 1 kHz
Technical Specifications
Electrical
Input connector
3 XLRF-type
Output connector
3 XLRM-type
MUTE key with red LED
Indicator light
24 V~ 48 V DC, 3 mA
Phantom power requirements
Insertion loss
1 dB (150 Ω input resistance)
Output impedance
Mute attenuation (150 Ω input resistance)
380 Ω
55 dB at 1 kHz
35 dB at 100 Hz
Ordering Information
30 dB at 50 Hz
HCS-1857AN
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 91 x 131 mm
Weight
808 g
Color
Black
11.5
Tabletop Microphone Stand (with non-lock button)
Gooseneck Microphones
HCS-1857AS
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type socket on the rear as microphone signal
output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
■
HCS-1857AS with ON/OFF key. When pressing the ON/OFF
button, the red LED indicator lights up, and the
microphone is activated, press ON/OFF button again to
turn off the microphone. The attenuation value is 55 dB at
3. Microphone detachment: Press the release tab of the XLR
1 kHz
socket on the microphone stand and pull out the microphone.
Technical Specifications
Electrical
Input connector
3 XLRF-type
Output connector
3 XLRM-type
Indicator light
ON/OFF key with red LED
24 V~ 48 V DC, 3 mA
Phantom power requirements
Insertion loss
1 dB (150 Ω input resistance)
Output impedance
Turn off attenuation (150 Ω input resistance)
380 Ω
55 dB at 1 kHz
35 dB at 100 Hz
Ordering Information
30 dB at 50 Hz
HCS-1857AS
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 91 x 131 mm
Weight
808 g
Color
Black
11.6
Tabletop Microphone Stand (with self-lock button)
Gooseneck Microphones
HCS-1857B
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type connector with 2-meter long cable on the rear
as microphone signal output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
3. Microphone detachment: Press the release tab of the XLR
socket on the microphone stand and pull out the microphone.
Technical Specifications
Electrical
Input connector
Output connector
Phantom power requirements
Insertion loss
Output impedance
3 XLRF-type
3 XLRM-type with 2-meter long cable
24 V~ 48 V DC, 3 mA
1 dB (150 Ω input resistance)
380 Ω
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 112 x 140 mm
Weight
820 g
Color
Black
Ordering Information
HCS-1857B
11.7
Tabletop Microphone Stand
Gooseneck Microphones
HCS-1857BN
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type connector with 2-meter long cable on the rear
as microphone signal output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
■
HCS-1857 BN with mute (MUTE) key. When pressing the
MUTE button, the red LED indicator lights up and the
3. Microphone detachment: Press the release tab of the XLR
microphone is muted; release the MUTE button to activate
socket on the microphone stand and pull out the microphone.
the microphone again. The MUTE key can be repeatedly
pressed to freely control the microphone. The attenuation
value is 55 dB at 1 kHz
Technical Specifications
Electrical
Input connector
Output connector
Indicator light
3 XLRF-type
3 XLRM-type with 2-meter long cable
MUTE switch with red LED
24 V~ 48 V DC, 3 mA
Phantom power requirements
Insertion loss
1 dB (150 Ω input resistance)
Output impedance
Mute attenuation (150 Ω input resistance)
Ordering Information
380 Ω
HCS-1857BN
55 dB at 1 kHz
35 dB at 100 Hz
30 dB at 50 Hz
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 112 x 140 mm
Weight
820 g
Color
Black
11.8
Tabletop Microphone Stand (with non-lock button)
Gooseneck Microphones
HCS-1857BS
Tabletop Microphone Stand
Configuration and connection
1. Connecting microphone: Connecting 3-pin XLRM-type
connector at the bottom of the microphone to the 3-pin
XLRF-type socket on the microphone stand.
2. Connecting amplifier: Connecting 3-pin XLRM-type connector to
other devices such as amplifier, audio mixing console, etc.
Features
■
Delicate and elegant structural design, ergonomic and
highly modern
■
3-pin XLRF-type socket as microphone input; 3-pin
XLRM-type connector with 2-meter long cable on the rear
as microphone signal output
■
It can be widely used in meetings, lectures, teaching and
on other occasions when cooperating with gooseneck
microphone
■
Complementary to other 3-pin XLRM-type microphone
devices
■
HCS-1857BS with ON/OFF key. When pressing the ON/OFF
button, the red LED indicator lights up, and the
3. Microphone detachment: Press the release tab of the XLR
microphone is activated, press ON/OFF button again to
socket on the microphone stand and pull out the microphone.
turn off the microphone. The attenuation value is 55 dB at
1 kHz
Technical Specifications
Electrical
Input connector
Output connector
Indicator light
3 XLRF-type
3 XLRM-type with 2-meter long cable
MUTE switch with red LED
24 V~ 48 V DC, 3 mA
Phantom power requirements
Insertion loss
1 dB (150 Ω input resistance)
Output impedance
Turn off attenuation (150 Ω input resistance)
380 Ω
Ordering Information
55 dB at 1 kHz
HCS-1857BS
35 dB at 100 Hz
30 dB at 50 Hz
Mechanical
Installation
Dimensions (h x w x d)
Tabletop
41 x 112 x 140 mm
Weight
820 g
Color
Black
11.9
Tabletop Microphone Stand (with self-lock button)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising