passive high power subwoofer
TTS18
PASSIVE HIGH POWER SUBWOOFER
DESCRIPTION
The TTS18 is a high performance sub-bass system designed for use with
small to medium sound reinforcement systems, in both touring and install
applications. It features a 1000 watt 18” drive unit with magnet structure
and suspension engineered for maximum linear excursion. The low-frequency
transducer is an RCF Precision high-power 18” woofer with a 4” inside/
outside voice coil to minimize power compression and extend the life of the
product. This new woofer design is the result of the latest refinements in RCF
experiences in compact active and passive subwoofer design, resulting in a
fast and controlled reproduction of the bass frequency range.
Top quality cone drivers provide the highest output and best sonic
performance possible for a given form factor. TTS18 is direct radiating, with
optimally tuned, vented enclosure. TTS18 is the choice where the best sonic
performance, highest reliability, and most robust physical construction are
required
The Baltic birch plywood enclosure is painted with black, heavy duty, textured
epoxy and is fitted with six handles. It features large area porting to reduce air
noise. The front is protected from a strong powder coated metal grille.
An optional top hat fitting allows mid-top cabinets to be mounted on the sub
using an adjustable pole.
MAIN APPLICATIONS
MAIN FEATURES
•
•
•
•
• Very compact size
• Maximum output per size available on market
• Minimum weight
• Wide, constant directivity, horizontal coverage angle
• High power full neodymium 18” transducer
• Baltic birch cabinet
Touring sound reinforcement for small and mid-sized venues
Portable and installed audio-visual systems
Theatres and night clubs
Stage monitor side fill reinforcement
ACOUSTICAL SPECIFICATIONS
Frequency response:
30 Hz ÷ 150 Hz
Max SPL:
136 dB
Sensitivity 1W/1m:
100 dB
Coverage angle:
Compression driver:
Midrange:
Woofer:
18” neo, 4” voice coil
Power handling:
2000W
INPUT SECTION
Input signal (Impedance):
Input connector:
Output signal connector:
8Ω
Speakon NL4
Speakon NL4
PROCESSOR SECTION
Crossover frequencies:
Protections:
-
PHYSICAL
Cabinet:
Dimensions (HxWxD):
Weight:
Hardware:
Handles:
Pole Mount / Cap:
Colour:
Baltic birch
520 700x 860mm (20.47”x 27.55”x 33.85”)
52 kg (116.84 lbs)
Fittings ready
6 on side
ready
Black
TTS18
(processed)
1.0-J-N
TTS18
PART NUMBERS
13000136
DIMENSIONS (All data are in mm)
520
[20.47"]
700
[27.55"]
30
[1.18"]
860
[33.85"]
M10
66
[2.60"]
M10
289.5
[11.40"]
30
[1.18"]
289.5
[11.40"]
M6
60
[2.36"]
50.8
[2.00"]
70.4
[2.77"]
M6
60
[2.36"]
M10
M10
M6
408.66
[16.09"]
66.02
[2.60"]
M6
50.8
[2.00"]
70.4
[2.77"]
ACCESSORIES
COVER TTS18
Protection cover for TTS18 and TTS18-A.
AC PMA
Speaker pole mount.
AC PRO-PM
Steel pole mount accessory for a satellite loudspeaker on a subwoofer. Both ends of the pole mount are fitted with an expanding
mandrel system for a tight and vibration-free fit for the base and satellite speakers.
AC TT PMA
Pole mount cap for TTS18, TTS18-A, TTS28 and TTS28-A subwoofer.
AC M20-PLATE
Threaded plate for M20 pole mount.
AC PM M20
M20 pole mount for TT22, TT22-A, TT25 and TT25-A speakers.
AC NL4F 4X
Kit of 4 male speakon connectors 4 poles.
RCF products are continually improved. All specifications are therefore subject to change without notice.
www.rcf.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising