Displayport 1.2 splitters/distribution amplifiers

Displayport 1.2 splitters/distribution amplifiers
•
•
•
•
•
•
•
DisplayPort 1.2 (DP 1.2) compliant
Supports HBR2/HBR/RBR
Supports SST or MST
Supports 1, 2 or 4 lanes
HDCP compliant
*Supports In/out DP++ (DisplayPort ++ / Dual-mode DisplayPort)
Supports all 3D formats defined in HDMI 1.4 and Display Port 1.2a
* Dual-mode DisplayPort (also known as DisplayPort++) can directly output single-link HDMI and
DVI signals using a simple passive adapter that adjusts from the different connector and the lower voltages used by DisplayPort. When a dual-mode chipset detects that a DVI or HDMI passive
adapter is attached, it switches to DVI/HDMI mode which uses the 4-lane main DisplayPort link and
the AUX channel link to transmit three TMDS signals, a clock signal and Display Data Channel data/
clock. Dual-mode ports are marked with the DP++ logo; most DisplayPort graphics cards, as well as
all Thunderbolt ports with mDP connector, support this mode.
DP-1x2
DP-1x4
1x2 DisplayPort DA
1x4 DisplayPort DA
12V DC
12V DC
Power Status
Reset
MODEL
HDMI Input
Output 1
Output 2
Output 1,2
Power Status
DP-1x2
Description
DisplayPort Splitter/Distribution Amplifer
1 x DisplayPort
2 DisplayPort
LED Indicators
5 meters
Maximum Resolution
4K 60Hz
300g
Power
34
4 DisplayPort
Power
Maximum Distance
Weight
Dimension
Output 3,4
DP-1x4
Input
Output
DisplayPort Input
Reset
DP1.2
Displayport 1.2 splitters/distribution amplifiers
500g
DC 12V 1200 mA
120 x 75 x 25 mm
171 x 120 x 25 mm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement