Kingston Technology | KVR667D2N5K2-4G | Datasheet | Kingston Technology ValueRAM DDR2 667MHz 4GB-kit

Kingston Technology ValueRAM DDR2 667MHz 4GB-kit
Memory Module Specification
KVR667D2N5K2/4G
4GB (2GB 256M x 64-Bit x 2 pcs.)
DDR2-667 CL5 240-Pin DIMM Kit
DESCRIPTION:
ValueRAM's KVR667D2N5K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR2-667
CL5 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 4GB (4096MB).
The components on each module include sixteen 128M x 8-bit (16M x 8-bit x 8 Bank) DDR2667 SDRAM in FBGA packages. Each 240-pin DIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
3ns (min.) / 8ns (max.)
54ns (min.)
127.5ns
39ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
2.225 W (operating per module)
94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
133.35
Units : Millimeters
(2X)4.00
131.35
10.00
128.95
30.00
(2)
2.50
A
17.80
2.30
SPD
B
63.00
4.0
55.00
1.270 ± 0.10
4.00
3.00
2.50±0.20
5.00
4.00
0.80±0.05
3.80
2.50
1.50±0.10
Detail A
0.20
1.00
4.00
Detail B
Figure 1: KVR667D2N5K2/4G 240-Pin DIMM
Document No. VALUERAM0497-001.A00
06/27/06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising