null null

RP-WR5442HB
Wireless-N 4-P High-Power AP Router,
2T2R
The Router is suitable for Small Office/Home
Office (SOHO) Wireless network solution. It is a 4 in
1 network device, which combines wireless access
point, firewall, 4-port Switch and the NAT-Router. It provides up to 300Mbps data transmission
rate in 2.4GHz frequency, complies with IEEE802.11n, IEEE802.11g and IEEE802.11b. The
router supports wireless LAN for up to 128-bit WEP, WPA/WPA2 encryption security. The device
provides WEB and Remote Management and system log so that network administrators can
manage and monitor the network in real time.
The Router provides a hardware WPS (Wi-Fi protected setup) button, which helps you setup
a secured wireless network in a minute and activate the wireless protection easily.
Feature




















2.4GHz IEEE 802.11n 2x2 MIMO
Complies with IEEE 802.11bg
Data-rate up to 300Mbps
High power and High sensitivity
Wide coverage
RF output power adjustable
Firewall, URL/IP/Port/MAC filtering
Firmware upgrade via HTTP
Support Gateway, Bridge and WISP mode
Multiple ESSID
QoS enhancement-WMM
TCP/UDP/ICMP/ARP protocol stack
Virtual DMZ, Port forwarding
Easy setup wizard
Web-based utility
Passive PoE
Telnet supported
Country code selectable
WAN Remote Port configuration
Support 12V Passive PoE onboard

Specification
Standards



Interface



Antenna
Frequency Band
Access Protocol




Data Rates



Output Power


Receive
sensitivity



Operation mode
Security




Management
Features





Router Features



Ethernet Features


Power Supply


Environment


Dimension
Certifications


IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
IEEE 802.3 and 802.3u 10/100 Mbps
4* RJ-45 10/100Mbps LAN Port (LAN1 passive PoE in, LAN4
passive PoE out)
1* RJ-45 WAN Port (Passive PoE in)
Reset Button
WPS Button
Two detachable 5dBi antennas
2.400GHz ~ 2.484GHz
CSMA/CA
802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n(20MHz): up to 144Mbps
802.11n(40MHz): up to 300Mbps
802.11b: up to 28 ± 1dBm
802.11g: up to 26 ± 1dBm
802.11n: up to 26 ± 1dBm
-96dBm @ 802.11b
-91dBm @ 802.11g
-91dBm @ 802.11n
AP, Client, WDS, AP+WDS, Gateway, Bridge, Wireless ISP
WEP: WEP(64/128bit),
WPA/ WPA2: TKIP / AES, WPS
Firmware upgrade via HTTP
WAN and LAN side connection statistics
Configuration of NAT / NAPT
Selection of Bridge or Router Mode
PPP user ID and password
DHCP Server and Client
NAPT (Network Address and Port Translation)
ICMP (Internet Control Message Protocol)
DDNS (Dynamic Domain Name Service)
Compliant with IEEE 802.3 and 802.3u 10/100 Mbps
All Ethernet ports support auto-crossover (MDI/MDI-X)
External power adapter DC12V 1A
12V Passive PoE onboard
Operating Temperature: -20°C ~ 60°C
Operating Humidity: 10%~90% (Non-Condensing)
147 * 98 * 30 mm
FCC, CE
Application
Ordering information
RP-WR5442HB
Wireless-N/b/g 4-P High-Power 28dBm AP Router, 2T2R,
with 5dBi antenna
REPOTEC CO., LTD.
3F, No.258, Lian Cheng Rd., Chung Ho City, Taipei Hsien 235, TAIWAN
TEL: 886-2-8227-1888 FAX: 886-2-8227-1818

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project