2N SIP SPEAKER Installation manual

Add to my manuals
50 Pages

advertisement

2N SIP SPEAKER Installation manual | Manualzz

Public Address Paging

Version:

Installation Manual

2.9

www.2n.cz

The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications equipment.

The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private branch exchanges (PBX), and door and lift communicators. 2N

TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years and represented a symbol of stability and prosperity on the telecommunications market for almost two decades. At present, we export our products into over 120 countries worldwide and have exclusive distributors on all continents.

names mentioned herein are registered trademarks and/or trademarks or brands protected by law.

2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www.

faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...".

basic requirements and other relevant provisions of the 1999/5/EC directive. For the full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our website at www.2n.cz.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products.

Content:

1. Product Overview

1.1 Components and Associated Products

1.2 Terms and Symbols

2. Description and Installation

2.1 Before You Start

2.2 Mechanical Installation

2.3 Electric Installation

2.4 Product Description

3. Function and Use

3.1 Configuration

3.2 Default Reset

3.3 Basic Functions

3.4 Downloads

4. Technical Parameters

5. Supplementary Information

5.1 Troubleshooting

5.2 Directives, Laws and Regulations

5.3 General Instructions and Cautions

2N TELEKOMUNIKACE a.s., www.2n.cz

4/50

1. Product Overview

In this section, we introduce the Audio Converter product, outline its application options and highlight the advantages following from its use. The section also includes safety precautions.

Here is what you can find in this section:

1.1 Components and Associated Products

1.2 Terms and Symbols

2N TELEKOMUNIKACE a.s., www.2n.cz

5/50

Basic Properties

®

SIP Audio Converter is a versatile sound transmission system for IP networks. It is designed as a universal VoIP telephone with an audio output/input, button and switched circuit connection option. It finds a variety of applications – in schools, hospitals, office buildings, hotels, production halls, shopping centres, bus terminals, airports and so on. You can monitor the events in the 2N

®

SIP Audio Converter area using an integrated streaming server.

2N

®

SIP Audio Converter is a stand-alone SIP-based sound decoder and converter with an amplifier. 2N

®

SIP Audio Converter communicates with the other audio system components via the SIP Proxy or directly via a specified address.

Press the attached button to set up a call to up to three predefined numbers or addresses, with calls being transferred automatically at no answer. Configure the button function using an integrated calendar to make sure that the called subscriber is always accessed.

You can make use of a lot of convenient VoIP services thanks to the integrated SIP such as call forwarding at no answer (to another worksite, recording machine or mobile phone) and call transfer (from the secretary to the required person, e.g.).

2N

®

SIP Audio Converter is equipped with a switch for you to control the electric door lock from any telephone (by tone-entering the password).

You can manage your 2N

®

SIP Audio Converter unit via a configuration web interface, by pushing the unit buttons or with a remote controller.

2N TELEKOMUNIKACE a.s., www.2n.cz

6/50

Advantages of Use

Operable in the Ethernet network

Ethernet-based power supply – PoE

SIP

Integrated administration web server

1 programmable button

Streamed audio support

Integrated calendar with programmable DAY/NIGHT/WEEKEND modes

Applicable as standard VoIP telephone/communicator

DTMF detection according to RFC2833, in-band and SIP-INFO

2N TELEKOMUNIKACE a.s., www.2n.cz

7/50

Basic Features

10/100Base-TX LAN interface

12 V DC / 1,8 A or PoE 802.3af supply

Integrated 30 W amplifier

Line/headset output

Colour LED operational status signalling

Universal galvanically isolated output

Universal galvanically isolated digital input

Two volume control buttons

Infrared remote control

2N TELEKOMUNIKACE a.s., www.2n.cz

8/50

1.1 Components and Associated Products

Basic Unit

Part No. 914401E

®

Audio Converter

IP audio decoder

18 W amplifier

PoE / 12 V

10/100Base Ethernet terminals for connecting loudspeakers 4–16 Ohm support for SIP protocol

Part No. 914490E

Part No. 914490E

®

Audio Converter set with speaker and mic

2N TELEKOMUNIKACE a.s., www.2n.cz

9/50

Power Supply

Part Numbers:

91378100

91378100E

91378100US

PoE injector – without cable

PoE injetor – with EU cable

PoE injector – with US cable

For power supply of intercom via ethernet cable when PoE switch is not available.

Part No. 91341481E

Stabilised 12 V / 2 A power supply needs to be used when no PoE is available.

Part No. 932928

For external power supply of the lock with 12 V AC voltage.

2N TELEKOMUNIKACE a.s., www.2n.cz

10/50

Internal Units

Part Numbers:

91378365

91378366

®

– black

WiFi version (second part no.)

The elegant internal touch panel,

®

, is suitable for all 2N Helios IP intercoms. On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall.

Part Numbers:

91378365WH

91378366WH

®

– white

WiFi version (second part no.)

The elegant internal touch panel, 2N

®

Indoor Touch , is suitable for all 2N Helios IP intercoms. On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall.

2N TELEKOMUNIKACE a.s., www.2n.cz

11/50

VoIP Telephones

Part No. 91378357

Grandstream GXV3240 VoIP video telephone

GXV3240 is the successor to the popular GXV3140 model, which allows comfortable video calls in the IP network.

Touchscreen and keyboard control.

Part No. 91378358

Grandstream GXV3275 VoIP telephone

GXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network.

Touchscreen control.

2N TELEKOMUNIKACE a.s., www.2n.cz

12/50

Electric Locks

Part No. 932071E

BEFO 11211

12 V / 230 mA DC low consumption

Part No. 932081E

BEFO 11221 with momentum pin

12 V / 230 mA DC low consumption

For opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until someone closes the door.

Part No. 932091E

BEFO 11211MB with mechanical blocking

12 V / 230 mA DC low consumption

Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock.

2N TELEKOMUNIKACE a.s., www.2n.cz

13/50

Part No. 932061E

211211 door signalling, low consumption

12 V / 230 mA

A regular lock with a built-in contact to indicate whether the door is open or closed.

Part No. 932072E

31211 fail-safe

12 V / 170 mA DC

The failsafe lock is closed when electricity is switched on.

When electricity is interrupted, the lock is opened.

Part No. 932062E

321211 fail-safe, door signalling

12 V / 170 mA

The failsafe lock is closed when electricity is switched on.

When electricity is interrupted, the lock is opened.

It contains a built-in contact to indicate whether the door is open or closed.

Tip accesories

2N TELEKOMUNIKACE a.s., www.2n.cz

14/50

Accessories

Part No. 9159010

Security Relay

A handy add-on that significantly enhances door entry security as it prevents tampering with the intercom and forced opening of the lock. To be installed between intercom and lock, powered by the intercom.

Part No. 9137410E

External IP Relay – 1 output

Standalone IP device which can be controlled by HTTP commands sent by Helios IP intercom, which can thus control devices on unlimited distance.

Part No. 9137411E

External IP Relay – 4 outputs, PoE

Standalone IP device which can be controlled by HTTP commands sent by Helios IP intercom, which can thus control devices on unlimited distance.

Part No. 9159013

Exit button

(suitable for Security relay)

2N TELEKOMUNIKACE a.s., www.2n.cz

15/50

Part No. 9159014EU/US

/UK

Part No. 9154004

(set of 2 adaptors and power source for EU/US/UK)

The

®

converter allows you to use existing wiring (2 wires) from your original door bell or door intercom to connect any IP device. You don’t have to configure anything, and you only need one

®

unit at each end of the cable and a power source connected to at least one of these units.

The

®

unit then provides PoE power not only to the second converter, but also to all other connected IP end devices.

Water-proof metal button

Hole diameter 19 mm, button diameter 22 mm.

Part No. 914105E

®

Audio Converter

Side legs can be used to attach the device to any base.

2N TELEKOMUNIKACE a.s., www.2n.cz

16/50

Part No. 914034B/W

Wall-mounted loudspeaker

A wall-mounted 8 ohm loudspeaker can be connected as an loudspeaker to the

®

Audio Converter . Available in black and white.

Tip

For more accessories and particular advice please contact your local distributor of 2N products.

2N TELEKOMUNIKACE a.s., www.2n.cz

17/50

1.2 Terms and Symbols

The following symbols and pictograms are used in the manual:

Safety

Always abide by this information to prevent persons from injury.

Warning

Always abide by this information to prevent damage to the device.

Caution

Important information for system functionality.

Tip

Useful information for quick and efficient functionality.

Note

Routines or advice for efficient use of the device.

2N TELEKOMUNIKACE a.s., www.2n.cz

18/50

2. Description and Installation

In this section, we describe the

®

Audio Converter product and its installation.

Here is what you can find in this section:

2.1 Before You Start

2.2 Mechanical Installation

2.3 Electric Installation

2.4 Product Description

2N TELEKOMUNIKACE a.s., www.2n.cz

19/50

2.1 Before You Start

Product Completeness Check

Before installing this product, check whether the product delivery includes:

®

Audio Converter

4x self-adhesive device feet

1x 5-pin terminal block

1x 4-pin terminal block

Quick User Manual

Installation Conditions

®

Audio Converter is to be connected to the LAN.

®

Audio Converter is designed for indoor use.

®

Audio Converter may not be operated in damp environment.

2N TELEKOMUNIKACE a.s., www.2n.cz

20/50

2.2 Mechanical Installation

If you intend to use your

®

Audio Converter unit in various interiors, please stick the four feet included in the delivery onto the bottom side of the device to avoid scratching of the underlying surface.

Surface Mounting

Use the L-profiles (separate accessories – Part No. 914105E) to mount your

®

Audio Converter unit on a wall or another solid surface. Insert the L-profiles in the sides of the assembly and fit them with four screws to keep the device in place.

You can use the dowels and screws included in the delivery for wall mounting. Follow the instructions below while drilling the mounting holes.

Mounting Holes

2N TELEKOMUNIKACE a.s., www.2n.cz

21/50

2.3 Electric Installation

Electric Installation Step by Step

It is very easy to connect

®

Audio Converter electrically. Follow the steps below to avoid equipment damage or electrical injury:

Connect the microphone, loudspeaker, headset or external amplifier.

Connect the digital input and output.

Connect the UTP cable.

Connect a 12 V power supply (unless PoE is used).

Caution

Be sure to connect the Audio Converter power supply as the last step. The same applies to PoE supply from the LAN.

Loudspeaker Connection

2N

®

SIP Audio Converter is equipped with a power amplifier for 1 or 2 loudspeakers.

The loudspeakers to be used must have the nominal impedance of 4–8 Ω each. Refer to the table below for possible configurations and related maximum power outputs

(sinus, THD < 1 %):

Loudspeaker(s) 12 V / 2 A PoE

Two 4 Ω 2x 10 W 2x 5 W

Two 8 Ω

One 4 Ω

One 8 Ω

2x 9 W

1x 18 W

1x 12 W

2x 5 W

1x 10 W

1x 10 W

2N TELEKOMUNIKACE a.s., www.2n.cz

22/50

Caution

Use an external power supply to maximise the power output. Make sure that the maximum Master volume value is +6 dB in the Hardware / Audio menu if you use PoE and 4Ω speaker.

Use the R + and L − or L + and − terminals.

Loudspeaker Connection

Headset/External Amplifier Connection

®

Audio Converter is equipped with a headset/external amplifier output. The 3.5

mm jack is available on the front panel.

Audio Output Connection

2N TELEKOMUNIKACE a.s., www.2n.cz

23/50

Microphone/Line Connection

2N

®

SIP Audio Converter is equipped with a microphone/external supply output. The

3.5mm jack is available on the front panel. Use electret microphone for connection.

Audio Input Connection

Digital Output Connection

2N

®

SIP Audio Converter is equipped with a passive output relay switch for light signalling/external amplifier/alarm activation. The output is available on terminals marked LOGIC OUT and allows for switching of up to 24 V / 1 A AC/DC loads. By default, the output is in the NO (normally open) state.

Digital Output Connection

Warning

Do not exceed the upper voltage and current limits to avoid irreversible damage of the equipment.

2N TELEKOMUNIKACE a.s., www.2n.cz

24/50

Warning

When you connect a device containing a coil, such as a relay or an electromagnetic lock, it is necessary to protect the intercom against voltage peak while switching off the induction load. For this way of protection we recommend a diode 1 A / 1000 V (e.g., 1N4007, 1N5407, 1N5408) connected antiparallel to the device.

Digital Input Connection

®

Audio Converter is equipped with a digital input for an optional button. This input is available on the LOGIC IN terminal. Only external contact needed.

Digital Input Connection

LAN Connection

Audio Converter can be connected to a standard local area network using a

LAN interface via the RJ-45 connector on the back panel. Always use CAT-5d or higher class cables for reliability reasons.

LAN Connection

2N TELEKOMUNIKACE a.s., www.2n.cz

25/50

The LAN interface is equipped with the Auto MDIX function for automatic straight

/ c r o s s - o v e r c a b l e d e t e c t i o n .

The LAN interface can also be used for the

®

Audio Converter power supply through active network elements or injectors meeting the IEEE 802.3af standard.

Note

With PoE, the integrated amplifier power output is limited to 10 W. To utilise the maximum power output of the amplifier, feed 2N

®

SIP Audio

Converter from a 12 V DC / 1.8 A external power supply.

Caution

We recommend the use of a LAN surge protection.

Power Supply Connection

2N

®

SIP Audio Converter can be fed using active network elements or PoE injectors via the LAN interface. In case this option is unavailable, use a 12 V DC / 2 A (Part No.

914102E) power supply or another power supply on condition that you keep the nominal values included in the Mechanical and Electrical Parameters subsection.

Connect the 12 V DC power supply either to the back panel supply connector marked

DC IN , or terminals marked DC IN + and DC IN – .

2N TELEKOMUNIKACE a.s., www.2n.cz

26/50

Power Supply Connection

Warning

If you use an adapter other than the recommended one, do not exceed the nominal supply voltage value of 12 V. Also make sure that the supply voltage polarity is correct. Exceeding nominal values and/or incorrect connection may lead to irreversible damage of the equipment.

2N TELEKOMUNIKACE a.s., www.2n.cz

27/50

2.4 Product Description

®

Audio Converter is an Ethernet audio converter designed for public sound distribution. It is connected to and communicates with the SIP Proxy server via telephone calls. This guarantees compatibility with all SIP-based systems.

The main principle of the

®

Audio Converter operation is to convert an audio signal between the Ethernet and audio interfaces. Therefore,

®

Audio Converter is equipped with an integrated 2x 10 W amplifier for direct loudspeaker connection.

You can control

®

Audio Converter with two buttons on the front panel or using an infrared remote controller.

Audio Converter is equipped with a digital input and output, which extend the converter options and may be helpful in special applications.

Use an integrated web interface for

® connected.

®

Audio Converter configuration. Apply the

to search all the

®

Audio Converter units

2N ® SIP Audio Converter Front and Back Panels

®

Audio Converter Front and Back Panel

2N TELEKOMUNIKACE a.s., www.2n.cz

28/50

Connectors and Controls:

1. 12 V DC / 2 A power supply adapter connector

2. Alternative power supply connection terminals −

3. Alternative power supply connection terminals +

4. Passive output relay with galvanic isolation for external 24 V / 1 A AC/DC load switching

5. Digital input with galvanic isolation for external sensor/button, etc. connection

6. 10/100BASE-TX LAN RJ-45 connector

7. Integrated amplifier output terminals for 1 or 2 loudspeakers

8. Headset/line output for standard earphones/external amplifier

9. − and + volume control buttons

10. Microphone input (use electrolytic microphone)

11. Power up LED indicator

12. Operational status LED indicators

13. RESET button

14. Infrared signal receiver for remote control and signal reception LED

2N TELEKOMUNIKACE a.s., www.2n.cz

29/50

3. Function and Use

Converter product.

Here is what you can find in this section:

3.1 Configuration

3.2 Default Reset

3.3 Basic Functions

3.4 Downloads

®

Audio

2N TELEKOMUNIKACE a.s., www.2n.cz

30/50

3.1 Configuration

2N

®

SIP Audio Converter is configured through an integrated administration web server. Connect 2N

®

SIP Audio Converter to the IP network and make sure that

2N

®

SIP Audio Converter is powered.

Description of 2N ® Helios IP Network Scanner

The purpose of this application is to find the dynamic IP address of

2N

®

SIP Audio Converter in the local IP network. The application can be downloaded from the 2N web sites www.2n.cz

.

1. Run the

®

installer.

2. The installation wizard will guide you through the installation.

®

Installation Wizard

3. After installing the

®

application, run the application using the

Start

menu of the Microsoft Windows operating system.

2N TELEKOMUNIKACE a.s., www.2n.cz

31/50

4. Upon launch, the application starts searching the LAN automatically for all

®

Audio Converter s with an assigned or statically set IP address. The devices are then listed in a table.

®

Window

5. Select the

®

Audio Converter to be configured. Click on it with the righthand mouse button and select

Browse...

to open the web browser window, log in to Audio Converter and start configuring as described in the Login subsection below. To change the device IP address select

Config

. Set the requested static IP address or enable DHCP in the window. Default password for configuration: 2n. It is not possible to change the IP address of the devices on the grey backgroud. Select

Refresh

to find the devices again and verify that multicast is enabled in your network.

Change the device IP address via

®

application

2N TELEKOMUNIKACE a.s., www.2n.cz

32/50

Login

In the web browser enter the IP address of Audio Converter . Subsequently, a login screen will be displayed. The default login username and password are as follows:

Username: Admin

Password: 2n

If the login screen does not appear, an incorrect IP address was entered into the web browser or the 2N

®

SIP Audio Converter administration web server was turned off. If you are not sure of the IP address of 2N

®

SIP Audio Converter , use the

2N

®

Helios IP Network Scanner application as described in the Description of

2N

®

Helios IP Network Scanner subsection.Find how to switch on the administration web server in the Administration Web Server Switch-On subsection. Please check the

IP address entered, or, if applicable, check the way the IP address was obtained as described at the beginning of subsection

Default Reset

.

Language Selection

You can select the language using the tag menu in the right-hand upper corner as shown in Figure below.

Language Selection

2N TELEKOMUNIKACE a.s., www.2n.cz

33/50

3.2 Default Reset

Factory Default

The following factory default parameters are available:

Parameter Default

DHCP

IP address

Mask

Off

192.168.1.100

255.255.255.0

Default gateway 192.168.1.1

User name Admin

Password 2n

Factory Default Reset

In some cases, it may be useful to reset the

®

Audio Converter factory default values using the RESET button on the back panel. Do so, for example, if

2N

®

SIP Audio Converter ceases to respond due to, for example, incorrect LAN settings, LAN configuration changes, forgotten password and so on.

Factory Default Reset with Static IP Address

1. Use a thin rigid tool (toothpick or paperclip) to press the RESET button on the front panel. Do not disconnect the device from the power supply while resetting.

Reset with Static IP Address

2N TELEKOMUNIKACE a.s., www.2n.cz

34/50

2. Keep the RESET button pressed until the RDY/ACT LED stops flashing red and you can hear a beep (for approx. 18 s).

3. Now release the RESET button.

Factory Default Reset with DHCP Client ON

1. Use a thin rigid tool (toothpick or paperclip) to press the RESET button on the front panel and push the - volume button at the same. Do not disconnect the device from the power supply while resetting.

Reset with DHCP ON

2. Keep the RESET and - volume buttons pressed until the RDY/ACT LED stops flashing red and you can hear a beep (for approx. 18 s).

3. Now release both the buttons.

2N TELEKOMUNIKACE a.s., www.2n.cz

35/50

3.3 Basic Functions

2N ® SIP Audio Converter Button Control

®

Audio Converter is equipped with two buttons on the front panel.

Use these buttons to adjust the

Volume Buttons

®

Audio Converter volume.

2N ® SIP Audio Converter Remote Control

®

Audio Converter is equipped with an infrared remote control receiver.

Remote Control Receiver

Use the remote controller (Part No. 914103E) for volume adjustment.

Tip

The remote controller is not part of the standard delivery. Order it under

Part No. 914103E.

Be sure to set the remote controller into the Audio Converter compatible mode before the first use or after every battery replacement. Follow the steps below:

2N TELEKOMUNIKACE a.s., www.2n.cz

36/50

Remote Controller Setting

1. Press and hold the MAGIC button until the controller flashes twice.

2. Press the following buttons sequentially: once the left button, once the right button, twice the middle button and once the left button.

2N ® SIP Audio Converter Status Signalling

Audio Converter is equipped with colour LEDs on the front panel, which indicate operational statuses.

Status LEDs

Refer to the table below for the list of available operational statuses:

POWER Status

OFF Device powered off

Green (permanent light)

Power on, device in operation

RDY/ACT Status

OFF

Green (fast flashing)

Normal operational status

Call in progress

Red (slow flashing) After power up – start of the device.

If default values are set – device deletes configuration

Red (permanent light)

Device error

2N TELEKOMUNIKACE a.s., www.2n.cz

37/50

Remote Control Status

OFF Normal operational status

Red (one flash) Infrared remote control signal received

Operational Status Signalling

®

Audio Converter signals acoustically changes of and transitions between variable operational statuses. There are different tone combinations for each status change. Refer to table below for the list of signals.

Tones Meaning

User activated

Used when the user activation code is entered. The activation code is used for user (telephone directory position) activation. Refer to the Users subsection in configuration manual for activation code settings.

User deactivated

Used when the user deactivation code is entered. The deactivation code is used for user (telephone directory position) deactivation. An inactive user cannot be called, but the call may be forwarded to the user substitute if predefined. Refer to the Users subsection in configuration manual for deactivation code settings.

Calendar activated

Used for calendar activation. Use this function, for example, to enable user group ringing in an office. Refer to the Time Profiles subsection in configuration manual for activation code settings.

Calendar deactivated

Used for calendar deactivation. Use this function, for example, to disable user group ringing in an office and forward the call(s) to a predefined telephone number (reception desk or user mobile phones). Refer to the

Time Profiles subsection in configuration manual for deactivation code settings.

2N TELEKOMUNIKACE a.s., www.2n.cz

38/50

Tones Meaning

Call prolongation confirmation signalling

The maximum call duration is set in

®

Audio Converter for security reasons; refer to Phone subsection in configuration manual.

Internal application launched

Upon

®

Audio Converter power up or restart, the

®

Audio

Converter internal application is launched. A successful launch is signalled by this tone combination.

Connected to LAN, IP address received

®

Audio Converter logs into the LAN. A successful login is signalled by this tone combination.

Disconnected from LAN, IP address lost

This tone combination signals that the UTP cable has been disconnected from

®

Audio Converter .

Invalid telephone number or invalid switch activation code

®

Audio Converter allows you to store an extension number or enter the switch opening code. If the number/code is invalid, this tone combination is used.

Default reset of network parameters

Enter the default reset code for the network parameters within a 30second timeout after power up. Refer to Factory Default Reset with Static

IP Address and Factory Default Reset with DHCP Client ON for details.

2N TELEKOMUNIKACE a.s., www.2n.cz

39/50

Tones Meaning

Call end advance signalling

You can set a call time limit in

®

Audio Converter to avoid call blocking. Push a button on your VoIP telephone to prolong the call.

®

Audio Converter

When calling from your VoIP telephone to

®

Audio Converter , you get a short call connection tone.

2N TELEKOMUNIKACE a.s., www.2n.cz

40/50

Software

2N TELEKOMUNIKACE a.s., www.2n.cz

41/50

Mechanical and Electrical

Parameters

Dimensions: (105 x 34 x 86) mm

Dimensions L-profiles: (130 x 34 x 86) mm (separate accessories – Part No.

914105E)

Weight: 300 g

External power supply: 12 V DC / 1,8 A

LAN supply: PoE IEEE 802.3af

LAN connection: RJ-45 connector on back panel, 10/100BASE-TX with Auto-

MDIX function

Operating temperature: 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)

Operating humidity: 10 to 85 % (not condensing)

Permitted temperature range for product transport: -25 ˚C to 60 ˚C (-13 ˚F to

140 ˚F)

Status signalling: 3 RG LEDs on front panel

Local control: 3 buttons on front panel

Remote control: 1 infrared sensor on front panel

Power amplifier output: 4 terminals on back panel

Loudspeaker impedance: 4–16 Ω

Amplifier power output:

Loudspeaker 12 V / 2 A PoE

2x 4 Ω

2x 8 Ω

2x 10 W

2x 9 W

2x 5 W

2x 5 W

1x 4 Ω 1x 18 W 1x 10 W

2N TELEKOMUNIKACE a.s., www.2n.cz

42/50

Loudspeaker 12 V / 2 A PoE

1x 8 Ω 1x 12 W 1x 10 W

Frequency range: 20 Hz – 20 kHz (±0,5 dB)

Harmonic distortion: 0,05 % @ 1 kHz

Signal-to-noise ratio: 91 dB

Headset/Line output: 3,5 mm jack on front panel

Microphone input: Standard electret microphone, max. Vpp = 1V, Rin = 50 kΩ,

Vbias = 1,525 V

Digital output: 24 V / 1 A AC/DC passive output relay, galvanically isolated

Digital input: Only external contact needed

Supported protocols: SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP,

HTTP, HTTPS, Syslog, ONVIF

Audiocodecs: G.711 (PCMA, PCMU), G.729 (Annex A, B), G.722, L16 / 16 kHz

2N TELEKOMUNIKACE a.s., www.2n.cz

43/50

5. Supplementary Information

Here is what you can find in this section:

5.1 Troubleshooting

5.2 Directives, Laws and Regulations

5.3 General Instructions and Cautions

2N TELEKOMUNIKACE a.s., www.2n.cz

44/50

5.1 Troubleshooting

For the most frequently asked questions refer to faq.2n.cz

.

2N TELEKOMUNIKACE a.s., www.2n.cz

45/50

5.2 Directives, Laws and Regulations

Europe

®

conforms to the following directives and regulations:

Directive 1999/5/EC of the European Parliament and of the Council, of 9 March 1999 - on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity

Directive 2006/95/EC of the European Parliament and of the Council of 12 December

2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits

Directive 2004/108/EC of the Council of 15 December 2004 on the harmonisation of the laws of Member States relating to electromagnetic compatibility

Commission Regulation (EC) No. 1275/2008, of 17 December 2008, implementing

Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment

Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Regulation (EC) No. 1907/2006 of the European Parliament and of the Council of 18

December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending

Directive 1999/45/EC and repealing Council Regulation (EEC) No. 793/93 and

Commission Regulation (EC) No. 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC

Directive 2012/19/EC of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment.

Industry Canada

This Class B digital apparatus complies with Canadian ICES-003. / Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

2N TELEKOMUNIKACE a.s., www.2n.cz

46/50

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

2N TELEKOMUNIKACE a.s., www.2n.cz

47/50

5.3 General Instructions and Cautions

Please read this User Manual carefully before using the product. Follow all instructions and recommendations included herein.

Any use of the product that is in contradiction with the instructions provided herein may result in malfunction, damage or destruction of the product.

The manufacturer shall not be liable and responsible for any damage incurred as a result of a use of the product other than that included herein, namely undue application and disobedience of the recommendations and warnings in contradiction herewith.

Any use or connection of the product other than those included herein shall be considered undue and the manufacturer shall not be liable for any consequences arisen as a result of such misconduct.

Moreover, the manufacturer shall not be liable for any damage or destruction of the product incurred as a result of misplacement, incompetent installation and/or undue operation and use of the product in contradiction herewith.

The manufacturer assumes no responsibility for any malfunction, damage or destruction of the product caused by incompetent replacement of parts or due to the use of reproduction parts or components.

The manufacturer shall not be liable and responsible for any loss or damage incurred as a result of a natural disaster or any other unfavourable natural condition.

The manufacturer shall not be held liable for any damage of the product arising during the shipping thereof.

The manufacturer shall not make any warrant with regard to data loss or damage.

The manufacturer shall not be liable and responsible for any direct or indirect damage incurred as a result of a use of the product in contradiction herewith or a failure of the product due to a use in contradiction herewith.

All applicable legal regulations concerning the product installation and use as well as provisions of technical standards on electric installations have to be obeyed. The manufacturer shall not be liable and responsible for damage or destruction of the product or damage incurred by the consumer in case the product is used and handled contrary to the said regulations and provisions.

The consumer shall, at its own expense, obtain software protection of the product.

The manufacturer shall not be held liable and responsible for any damage incurred as a result of the use of deficient or substandard security software.

2N TELEKOMUNIKACE a.s., www.2n.cz

48/50

The consumer shall, without delay, change the access password for the product after installation. The manufacturer shall not be held liable or responsible for any damage incurred by the consumer in connection with the use of the original password.

The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff.

Electric Waste and Used Battery Pack Handling

Do not place used electric devices and battery packs into municipal waste containers.

An undue disposal thereof might impair the environment!

Deliver your expired electric appliances and battery packs removed from them to dedicated dumpsites or containers or give them back to the dealer or manufacturer for environmental-friendly disposal. The dealer or manufacturer shall take the product back free of charge and without requiring another purchase. Make sure that the devices to be disposed of are complete.

Do not throw battery packs into fire. Battery packs may not be taken into parts or short-circuited either.

2N TELEKOMUNIKACE a.s., www.2n.cz

49/50

2N TELEKOMUNIKACE a.s.

Modřanská 621, 143 01 Prague 4, Czech Republic

Phone: +420 261 301 500, Fax: +420 261 301 599

E-mail: [email protected]

Web: www.2n.cz

2N TELEKOMUNIKACE a.s., www.2n.cz

v2.9

50/50

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals