FST-130 PE-Continuity Tester

FST-130 PE-Continuity Tester
FST-130 PE-Continuity Tester
FST-130 is a high power continuity tester for PE-grounding (Ground Bond) testing. It’s easy to use and
single fly wheel programming allows you to preprogram full test sequences also in manual or PLCcontrolled automatic testing.
• In-line calibrated measuring module
• GPIB, RS-232, Ethernet or USB interface
• Communication interface between testers
• Timer functions also available in manual mode
• Alphanumeric display for easy programming
• Measuring ranges 0 - 100mΩ or 0 - 500mΩ
• 4-wire / true rms measurements
FST-130 PE-Continuity Tester
Technical Specification
Input
230V AC or optionally 115V AC; 50Hz / 60Hz;
330VA
Output
2 ranges, 6 and 12V AC
Maximum test current
2 ranges, 10A and 25A, setting accuracy -0+20%
Accuracy
Resistance + 0.5% from the range plus 5 digits
Current + 0.5% from the range plus 5 digits
Analog display + 2% from the range
Measuring Ranges
Standard 0 - 500mΩ
Optional 0 - 100mΩ
Timer function
OFF or 0,3 - 60s with 0,1s steps
Internal safety circuit
NC circuit 24V DC
External connections
Input 24V DC Start, Stop, External safety loop, 2 programmable
inputs
Output, closing relay Test On, Test Failed
Output, change over relay Discharge
Output NPN 24V DC / 100mA 2 programmable
Auxiliary power 24V DC, max. 100mA
Interfaces
GPIB, Ethernet, RS-232, USB
Dimensions
483mm x 410mm x 148mm (w x d x h)
Rack19”, 3U, 133mm without feet
Weight
23kg
ORDERING INFORMATION
Product Name
Art. No.
PE-Continuity Tester FST-130
2748
Measuring module for FST-130
3940
All specifications are subject to change without notice
FST-130 PE-Continuity Tester - Optional Equipment
Picture
Description and Type
Article
Number
FST RS-232
Interface RS-232 for FST Series
2752
- Baud rate 19200, 8, N, 1
- RS-232 connector: D-9 female
- RS-485 connector CAT 5 female
FST GPIB
Interface IEEE-488 for FST Series
2753
- IEEE-488.1-1987 and HS488 compatible
- self adapting
- 24 pole female connector
- RS-485 connector CAT5 female
USB Interface for FST Series
2159
- USB 1.1 and 2.0 compatible
- USB connecor type B female
- RS-485 connector CAT5 female
Interface Ethernet for FST Series
5458
- 10 / 100 Mbit Ethernet compatible
- Ethernet connector CAT5 female
- RS-485 connector CAT5 female
PR1 / HV, ISO, PE, FU Schuko-Socket, 2m cable
1296
- PE-wire has separate sense line for 4-wire
measurement
- Separate HV-leads for functional testing
- Max voltage 2500V
- Instead of schuko socket other types can be used
Pe Probe, remote controlled
0121
FST-130 PE-Continuity Tester - Optional Equipment
Picture
Description and Type
Article
Number
PE-cable 2m, red with crocodile clip
5950
Pe-cable 2m, black with crocodile clip
1731
Crocodile clip
All specifications are subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement