BCv1300-CL-M - C-Cam Technologies

BCv1300-CL-M - C-Cam Technologies
 | | Technologies
BCV1300 CMOS CAMERA
* 1280 x 1024 pixels (SXGA)
* Global Pipelined Shutter
o XX full-frames / sec.
e Monochrome or Color
* 8, 10 -bit digital output
« USB 2.0 or Camera Link Base interface
* Opto-isolated trigger input/output
e Area-scan, line-scan and sub-sampled operation
e Multi-slope exposure for extended dynamic range
The BCv1300 camera is a very compact, high
resolution CMOS camera. The camera is equipped
with the VITA 1300 image sensor with 48 um
square pixels producing up to 125 full frames per
second.
Higher frame-rates can be achieved by defining
up to 8 Windows-Of-Interest within the 1280 x
1024 pixel area, and/or specify sub-sampling.
The camera has an excellent signal-to-noise ratio
in combination with superior contrast
performance.
The sensor has a pipelined global shutter and
also a rolling shutter mode. The digital camera
can operate in single shot mode, which makes it
ideal for machine vision applications. In this
mode, the user has the freedom to decide when
the camera has to capture an image, not the
other way around as is the case with most
analogue camera systems. Continuous capture
mode is also supported. Frame-rates up to 150
fps can be achieved, or much higher using the
programmable Window-of-Interest and
subsampling
modes.
In rolling shutter mode a Correlated Double
Sampling (CDS) technique is used to reduce
Fixed Pattern Noise (FPN) and increase dynamic
range.
The image sensor has a Multi-Slope Exposure mode
that prevents over-exposure of brighter parts of an
image while preserving contrast in the darker
areas. In this way the dynamic range is extended
from the normal 60dB up to 90dB. The camera can
be switched between normal and Multi-Slope
mode.
The in-camera memory is used as image FIFO and
can also be used with custom camera logic for
other purposes, such as reference image, camera
calibration data, etc.
C-Cam Technologies currently supply two standard
interfaces: USB 2.0 and Camera Link (Base). All
cameras have an isolated trigger input and output.
The Camera Link interface will also allow for
remote triggering via the interface cable.
The BC family of cameras come with a complete
Software Development Kit (SDK) including drivers,
DLL files and sample code in high-level languages.
Software engineers can easily adapt this code to
integrate into their own applications. Application
libraries are available for Windows and Linux.
BCV1300 CMOS CAMERA
Sensor Specifications
Imager type
Sensor types
Total light-sensitive pixels
Window Of Interest (WOI)
Multiple WOI
Active image area
Pixel pitch
Optical Format
Fill factor
QE * FF
Sensitivity
Spectral Response Range
Temporal noise
Well capacity
Dark current signal
Parasitic Light Sensitivity
Standard dynamic range
High dynamic range
Multi-slope Exposure
Grey level
MTF
PRNU
Pixel rate
Frame speed full resolution
Shutter
Shutter synchronisation
Minimum exposure time
CMOS integrating active
pixel sensor (APS) Vita1300
Manufactured by On
Semiconductor Corp. with
On-chip FPN correction
Monochrome or Bayer
colour
1.3 megapix (1280H x 1024V)
Rectangle or line image
format specified by the user.
Up to 8 windows-of-interest
6.1mm (H) x4.9mm (V)
4.8 x 4.8 um
1/2 inch
80%
52% (QE * FF)
4.64 V / lux.s (0.22 A/ W)
approx. 400-1000nm
(t.b.d.)
Rolling: 0.72 DN
Synchronous: 1.88DN
17000 e
133e/s @25°C
<1/500
55dB linear
90dB in multi-slope mode
Up to 3 slopes, external reset
voltages , fully
programmable
resolution 8 or 10 bits
t.b.d.
2% of signal
4 channel x 620 Mbps
125 fps (10-bit mode)
On-chip electronic shutter
Global (pipelined) and
Rolling curtain type.
Remote via software or
cable
Local via 1/0 interface
Global shutter: t.b.d.
Rolling shutter: 1 line read
time
In-camera Resources
Memory
FPGA Logic
Interface Specifications
Interface types
max. 23 fps
max. 35 fps
Interface connector
USB 2.0
CameraLink
Cable lengths
USB 2.0
Camera Link
Remote Trigger
Local Trigger
Local Trigger Connector
Mechanical Specifications
Dimensions
Weight
Housing
Lens adapter
Tripod mount
Machine mount
Environmental Requirements
Operating temperature
Storage temperature
Power Requirements
USB
Camera Link
Power consumption
32MB DDR2
15k Lut
USB 2.0
Base Camera Link
Mini-USB with screwlocks
Mini Camera Link SDR26p
5m (2)
max 10m
via Camera Link interface
Isolated, 1 input, 1 output
Binder 712 series 5-pole 4)
50 x 50 x 53 mm ‘net incl lens)
< 200 grams ‘rot inel lens)
Aluminium, black anodised
C-mount (standard)
1/4 inch mount (1 off)
M6 x 1 (4x2 off)
0°C to +50°C
-30°C to +80°C (non-condensing)
via interface cable
8 - 12 Volts via separate ©
Binder 712 series 2-pole
<2 Watt
! Trigger-cable 5m included in package
* USB-cable 5m included in package. Other lengths on
request.
*Power-adapter with changeable input plugs for Europe,
UK , USA and Australia.
* Camera-link-cable not included.
Ordering Codes
BCv1300-CL-x Base Camera-link
BCv1300-U-x USB2.0
X = M for Monochrome and B for Bayer Color
The BCemv2000 camera is also available with customized housing or without housing for OEM.
Bundle’s including frame-grabber and camera-link cable available on request.
Please contact C-Cam for more info
um C-Cam
Technologies
A division of vector international bvba, Technologielaan 4, B-3001 Leuven , Belgium
Tel: +32 16 402016 www.c-cam.be
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement