Tripp Lite | SU5000RT4U | Datasheet | Tripp Lite SmartOnline 208/120V or 240/120V 5kVA 3.8kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 4U Rack/Tower, Bypass Switch

Tripp Lite SmartOnline 208/120V or 240/120V 5kVA 3.8kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 4U Rack/Tower, Bypass Switch
SmartOnline 208/120V or 240/120V 5kVA 3.8kW
On-Line Double-Conversion UPS, Extended Run,
SNMP, Webcard, 4U Rack/Tower, Bypass Switch
Highlights
5000VA / 5kVA / 3800W on-line
double-conversion UPS
Included maintenance bypass
switch enables live replacement
MODEL NUMBER: SU5000RT4U
of UPS with zero downtime
208/120V or 240/120V +/-3%
output at 60Hz
4U Rack/Tower compatible;
Hot-swappable power and
battery modules
USB, RS232 & EPO ports;
support for SNMP/WEB card
options
Front panel LEDs with detailed
LCD monitoring and control
screen
Expandable runtime with optional
external battery packs
Description
NEMA L14-30P input (4 wire split
Tripp Lite 5kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS. 5000VA on-line, double-conversion
phase); L6-30R, L6-20R &
UPS for server, network and telecommunications equipment. Maintains battery-derived AC output during
5-15/20R outlets
blackouts with active, full-time power conditioning. Fault tolerant auto-bypass prevents unexpected service
interruptions during overload or internal fault conditions. Single all-in-one housing installs in 4 rack spaces (4U).
Upright tower installation with optional 2-9USTAND accessory. 2-post rackmount installation with optional
2POSTRMKITHD. Full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects
brownouts and overvoltages from 65V to 140V (L-N). Expandable runtime with optional external battery packs.
Dual-conversion UPS converts raw input from AC to DC, then back to perfect sine wave AC output with
enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems
System Requirements
Electrical Service: 125/250V,
4-wire, split phase, 30A
Communication Interface: serial
DB-9 or USB
Compatible with all standard
19-in. equipment
not addressed by other UPS types. Highly efficient operation in optional economy mode setting, saving BTU heat
output and energy costs. Network-grade AC surge and noise suppression. Network management interfaces
Package Includes
include combination RS-232 enabled and contact closure serial port, enhanced USB port and SNMPWEBCARD
SU5000RT4U UPS System (with
slot. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring
SUPDMB56 detachable PDU
data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power
module)
management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed
USB, DB9 and EPO cabling
monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces.
Rackmount installation kit for 4
Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front
post rack enclosures
panel LEDs and LCD readout with scroll controls support visual monitoring of all major UPS functions. LED/LCD
Owner's manual and warranty
display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self test. 4-post
information
rackmount accessories. Includes NEMA L14-30P split phase 4 wire input plug and 12 total output receptacles (2
L6-30R, 2 L6-20R and 8 5-15/20R). Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS
replacement without powering off connected equipment. Optional SUPDM56HW detachable backplate accessory enables hardwire input-output connections to
the UPS. Additional external Power Distribution Unit (PDU) options available. Internal batteries and optional external battery packs are field replaceable and
hot swappable. Attractive all-black color scheme. $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).
1/6
Features
True on-line, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
5000VA/3800 watt output power capacity with dual voltage output of 208/120 or 240/120V
4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces
Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic
distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off
connected equipment
Optional SUPDM56HW detachable backplate accessory enables hardwire input-output connections to the UPS
Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical
servers, networking and telecommunications equipment
Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages
Supports connected equipment during blackouts for 14/6 minutes at half/full load levels, runtime is further expandable with optional external battery packs
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number
of additional servers over IP
Communication ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery
capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability.
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Built-in Emergency Power Off (EPO) interface with cable
Includes 12 built-in output receptacles (2 L6-30R, 2 L6-20R, 8 NEMA 5-15/20R)
L14-30P split phase, 4 wire plug-in connection (featured on included detachable PDU). Optional SUPDM56HW hardwire input/output PDU available
separately
Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
Front panel switches enable power on/off control, self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19-inch rack enclosures
Optional 2-9USTAND set of tower stands supports upright tower installation
Optional 2POSTRMKITHD accessory enables 2-post rackmount installation
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment
$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
Specifications
General Info
RoHS
Y
OUTPUT
2/6
Output Capacity Details
Supports up to 105% load continuously in double conversion mode, 106 to 125% for 3 minutes, 126 to 150% for 30
seconds; Loads over 150% trigger immediate bypass mode operation to support equipment directly from mains
power; Double conversion mode is automatically restored as the overload is cleared
Output Volt Amp Capacity (VA)
5000
Output kVA Capacity (kVA)
5
Output Watt Capacity (Watts)
3800
Output kW Capacity (kW)
3.8
Power Factor
0.8
Crest Factor
3:1
Nominal Output Voltage(s)
Supported
120V; 208V; 240V
Nominal Voltage Details
240/120V or 208/120V split phase output
Frequency Compatibility
60 Hz
Output Voltage Regulation (Line
Mode)
+/- 3%
Output Voltage Regulation
(Economy Line Mode)
+/- 10%
Output Voltage Regulation (Battery
Mode)
+/- 3%
Output Receptacles
(8) 5-15/20R; (2) L6-20R; (2) L6-30R
Output Circuit Breakers
20A branch rated breakers (x4) protect 2 5-15/20R outlets each, 20A double pole breakers (x2) protect one L6-20R
each, L6-30R outlets are unbreakered
Output AC Waveform (AC Mode)
Pure Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
INPUT
Rated input current (Maximum Load)
21A
Nominal Input Voltage(s) Supported
208V AC / 120V AC (4 wire split single phase); 240V AC /120V AC (4 wire split single phase)
UPS Input Connection Type
L14-30P
UPS Input Connection Description
4 wire split-phase input (L1, L2, N, G)
UPS Input Cord Length (ft.)
10
UPS Input Cord Length (m)
3
Recommended Electrical Service
30A 208/120V Split Phase
Input Cord Length (m)
3
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
6 min. (3800w)
Half Load Runtime (min.)
14 min. (1900w)
3/6
Expandable Battery Runtime
Supports extended runtime with optional external battery packs
External Battery Pack Compatibility
BP192V1037C-1PH ; BP192V12-3U ; BP192V1407C-1PH ; BP192V557C-1PH ; BP192V787C-1PH ;
BP192V5RT2U (limit 1)
DC System Voltage (VDC)
192
Battery Recharge Rate (Included
Batteries)
Less than 6 hours from 10% to 80% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge
RBC9-192
Battery Access
Front panel battery access door
Battery Replacement Description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description
+/-3% output voltage regulation in online, double-conversion mode
Overvoltage Correction
Corrects overvoltages to 140 (measured L1-N : L2-N)
Undervoltage Correction
Corrects undervoltages to 65 (measured L1-N : L2-N)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats
Switches
Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass
switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without
disrupting power to connected loads. Battery Charge level switch allows the charger output to be adjusted to a
higher charge rate when additional battery packs are added.
Alarm Cancel Operation
Alarm cancel switch
Audible Alarm
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
LED Indicators
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD
screen offers additional information and control options
SURGE / NOISE SUPPRESSION
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
PHYSICAL
Included Mounting Accessory
Description
Includes 4 post rackmount installation accessories
Installation Form Factors Supported
with Optional Accessories
2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)
Primary Form Factor
Rackmount
UPS Power Module Dimensions
(hwd, in.)
7 x 17.5 x 30.8
4/6
UPS Power Module Dimensions
(hwd, cm)
17.8 x 44.4 x 78.1
Installed Whole System Maximum
Rack Depth (in.)
30.8
Installed Whole System Maximum
Rack Depth (cm)
78.1
Rack Height (U Spaces)
4
UPS Power Module Weight (lbs.)
149.6
UPS Power Module Weight (kg)
67.9
UPS Dimensions Details
Installed Whole System Maximum Rack Depth refers to the installed depth with the included Bypass PDU attached
to the UPS power module
UPS Shipping Dimensions (hwd / in.)
13.2 x 37 x 23
UPS Shipping Dimensions (hwd /
cm)
33.7 x 94 x 58.4
Shipping Weight (lbs.)
189.2
Shipping Weight (kg)
85.9
Cooling Method
Fan
UPS Housing Material
Steel
ENVIRONMENTAL
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
1435.6
AC Mode Efficiency Rating (100%
Load)
90%
Operating Elevation (ft.)
0-3000m (0 to 10,000 ft.)
Audible Noise
60 dBA at front side 1 meter
Operating Elevation (m)
0-3000 m
COMMUNICATIONS
Communications Interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description
RS232 and contact closure communications are supported on one DB9 port
PowerAlert Software
Included
Communications Cable
USB and DB9 cabling included
LINE / BATTERY TRANSFER
Transfer Time
No transfer time (0 ms.) in online, double-conversion mode
5/6
Low Voltage Transfer to Battery
Power (Setpoint)
65V (L1-N:L2-N)
High Voltage Transfer to Battery
Power (Setpoint)
140V (L1-N:L2-N)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features
Automatic inverter bypass; Manual bypass switch; Detachable hot-swap PDU; Hot swappable UPS power module;
Hot swappable batteries
Green Energy-Saving Features
High efficiency economy mode operation; Schedulable daily hours of economy mode operation
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty Period (Worldwide)
2-year limited warranty
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
6/6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising