Tripp Lite | SU6000RT3U | Datasheet | Tripp Lite SmartOnline 208/120V or 240/120V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 9U Rack/Tower, USB, DB9 Serial, Hardwire

Tripp Lite SmartOnline 208/120V or 240/120V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 9U Rack/Tower, USB, DB9 Serial, Hardwire
SmartOnline 208/120V or 240/120V 6kVA 4.2kW
On-Line Double-Conversion UPS, Extended Run,
SNMP, Webcard, 9U Rack/Tower, USB, DB9 Serial,
Hardwire
Highlights
6000VA / 6kVA / 4200W on-line
double-conversion UPS
208/120V or 240/120V 50/60Hz
output; Economy mode option
9U Rack/Tower compatible;
MODEL NUMBER: SU6000RT3U
Hot-swap power and battery
modules
RS232 & EPO ports; Support for
SNMP/WEB card options
Front panel LEDs with detailed
LCD monitoring and control
screen
Expandable runtime with optional
external battery packs
Hardwire input (3 wire); Hardwire
output
Package Includes
SU6000RT3UPM 3U power
module
Description
SU6000XFMRRT3U 3U
Tripp Lite SU6000RT3U on-line, double-conversion UPS protects server, networking or telecommunications
step-down isolation transformer
equipment from blackouts, voltage fluctuations and surges in a compact tower/rackmount housing. In a rack
240V 3U external battery pack
configuration, the power module, step-down transformer, and battery pack occupy only 3 rack spaces each (9U
Four post compatible rack rail kit
total). Upright tower placement of entire system supported with included tower stands. Large capacity
(3 sets)
6000VA/4200 watt power module double-conversion technology converts raw input AC to DC, then
PowerAlert software, complete
resynthesizes it back to perfect sine wave AC output within 2% of user-selectable 208V/240V and 120V AC
data cabling and user manual
output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.2 Hz), removing harmonic distortion,
fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero
transfer time offers guaranteed uptime and compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or
PDU style power connections. Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs. Battery support can be
extended through the addition of external battery packs. Includes accessory slot for optional monitoring and management cards, plus DB9 contact-closure,
and DB9 enhanced serial monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.
Features
Tripp Lite SU60000RT3U 6kVA / 6,000VA / 4200 watt on-line, double-conversion UPS system in 9U total rack/tower configuration (3U UPS power module,
3U external battery pack and 3U step-down transformer)
Included step-down transformer with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to
connected networking equipment
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Hardwire input and output connections
Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise
Double-conversion operation converts raw input from AC to DC, then re-synthesizes output power back to perfect sine wave AC with enhanced protection
from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
1/6
from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
Accepts input voltages between 156 and 276, regulating output within 2% of selectable 208/240 and 120V AC output
Standard included 3U battery pack provides 20 minutes runtime at half load (3000VA) and 8 minutes at full load (6000VA)
Expandable runtime is supported with optional BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH
external battery packs
Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs
PowerAlert monitoring software offers detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries
become depleted
Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA (Network
Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other
networking devices
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232 interfaces
Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces
Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification
Supports Emergency Power Off (EPO) via built-in interface
Included rail kit supports 9U 19 inch rackmount installation in 4 post racks
Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks
Front panel LED's and LCD readout with scroll controls and supports visual monitoring of all major UPS functions and advanced UPS settings for nominal
voltage selection, economy mode, and other operational parameters
LED / LCD display panel rotates for viewing in rackmount or tower configurations
Network-grade AC surge and noise suppression
External battery packs are field replaceable and hot swappable
Specifications
General Info
RoHS
Y
OUTPUT
Output Capacity Details
Supports up to 102% load continuously in double conversion mode, 102 to 125% for 1 minute, 126% to 150% for 30
seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power;
Double conversion mode is automatically restored as load levels are reduced to 90% or less
Output Volt Amp Capacity (VA)
6000
Output kVA Capacity (kVA)
6
Output Watt Capacity (Watts)
4200
Output kW Capacity (kW)
4.2
Power Factor
0.7
Crest Factor
3:1
Nominal Output Voltage(s)
Supported
120V; 208V; 240V
Nominal Voltage Details
Voltage selection via front panel LCD interface
2/6
Frequency Compatibility
50 / 60 Hz
Frequency Compatibility Details
Output frequency matches input nominal on startup
Output Voltage Regulation (Line
Mode)
+/- 2%
Output Voltage Regulation
(Economy Line Mode)
+/- 10%
Output Voltage Regulation (Battery
Mode)
+/- 2%
Output Receptacles
Hardwire
Output Receptacle Backplate
Options
Optional backplates SUPDM12 (for 208v nominal), SUPDM14 (for 240v nominal), SUPDM16 (for 208v nominal) add
low and high voltage outlets, plus L6-30P input cord
Output Circuit Breakers
40A double-pole
Output AC Waveform (AC Mode)
Pure Sine wave
Output AC Waveform (Battery Mode)
Pure Sine wave
INPUT
Rated input current (Maximum Load)
30A
Nominal Input Voltage(s) Supported
208V AC; 240V AC
UPS Input Connection Type
Hardwire
UPS Input Connection Description
3 wire single phase input (L1, L2, G); optional, country-specific backplates SUPDM12 (for 208v nominal), SUPDM14
(for 240v nominal), SUPDM16 (for 208v nominal) add low and high voltage outlets, plus L6-30P input cord
Input Circuit Breakers
40A double-pole
Recommended Electrical Service
30A 208V or 240V
Input Phase
Single-Phase
BATTERY
Full Load Runtime (min.)
8 min. (4200w)
Half Load Runtime (min.)
20 min. (2100w)
Expandable Battery Runtime
Supports extended runtime with optional external battery packs
External Battery Pack Compatibility
BP240V10RT3U ; BP240V557C-1PH ; BP240V787C-1PH ; BP240V1037C-1PH ; BP240V1407C-1PH
DC System Voltage (VDC)
240
Battery Recharge Rate (Included
Batteries)
Less than 6 hours from 10% to 80% (typical, full load discharge)
Battery Replacement Description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description
Online, double-conversion power conditioning
Overvoltage Correction
2% output voltage regulation during overvoltages to 276
Undervoltage Correction
2% output voltage regulation during undervoltages to 156
3/6
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats (see manual)
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and
execute scrolling LCD functions; bundled transformer includes bypass switch to enable hot-swap UPS power
module replacement
Alarm Cancel Operation
Alarm cancel switch
Audible Alarm
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
LED Indicators
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD
screen offers additional information and control options
SURGE / NOISE SUPPRESSION
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
ISOLATION
Output Isolation Transformer
120V output includes load isolation transfomer protection
PHYSICAL
Included Mounting Accessory
Description
3 sets of adjustable 4 post rack rails included (for UPS, transformer and battery pack components); 2-9USTAND
tower kit included (supports up to 9U in tower format)
Installation Form Factors Supported
with Optional Accessories
2 post rackmount (2POSTRMKITHD)
Optional Mounting Accessory Notes
3 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate UPS, transformer and battery pack
Primary Form Factor
Rackmount
UPS Power Module Dimensions
(hwd, in.)
5.2 x 17.5 x 26
UPS Power Module Dimensions
(hwd, cm)
13.3 x 44.4 x 66
Installed Whole System Maximum
Rack Depth (in.)
26
Installed Whole System Maximum
Rack Depth (cm)
66
Rack Height (U Spaces)
9
UPS Power Module Weight (lbs.)
43.8
UPS Power Module Weight (kg)
19.9
UPS Dimensions Details
Includes 3U power module, 3U stepdown transformer and 3U battery pack
Stepdown Transformer Dimensions
(hwd / in.)
5.2 x 17.5 x 26
Stepdown Transformer Dimensions
(hwd / cm)
13.3 x 44.4 x 66
4/6
Stepdown Transformer Weight (lbs.)
90
Stepdown Transformer Weight (kg)
40.9
Included Battery Pack Dimensions
(hwd / in.)
5.2 x 17.5 x 25
Included Battery Pack Dimensions
(hwd / cm)
13.3 x 44.4 x 63.5
Included Battery Pack Weight (lbs.)
136.5
Included Battery Pack Weight (kg)
62
UPS Shipping Dimensions (hwd / in.)
36 x 24 x 35
UPS Shipping Dimensions (hwd /
cm)
91.4 x 61 x 88.9
Shipping Weight (lbs.)
436
Shipping Weight (kg)
197.9
Cooling Method
Fan
UPS Housing Material
Steel
ENVIRONMENTAL
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)
1412.3
AC Economy Mode BTU / Hr. (Full
Load)
911.5
AC Mode Efficiency Rating (100%
Load)
91%
AC Economy Mode Efficiency Rating
(100% Load)
96%
Operating Elevation (ft.)
0-3000m (0 to 10,000 ft.)
Audible Noise
53dBA At Front Side 1 Meter
Operating Elevation (m)
0-3000 m
COMMUNICATIONS
Communications Interface
DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description
RS232 and contact closure communications are located on two separate DB9 ports
PowerAlert Software
Included
Communications Cable
DB9 cable included
LINE / BATTERY TRANSFER
Transfer Time
No transfer time (0 ms.) in online, double-conversion mode
5/6
Transfer Time (Economy Mode)
8ms. typical power failure response in optional economy mode
Low Voltage Transfer to Battery
Power (Setpoint)
156
High Voltage Transfer to Battery
Power (Setpoint)
276
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
Economy Mode Operation
Optional economy mode enables high efficiency bypass operation with a maximum output voltage variation of
+/-10%. Double conversion mode is automatically restored as mains voltage varies beyond +/-10% with less than 1
millisecond transfer time between modes.
High Availability UPS Features
Automatic inverter bypass; Manual bypass switch; Hot swappable UPS power module; Hot swappable batteries
Green Energy-Saving Features
High efficiency economy mode operation; Schedulable daily hours of economy mode operation
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); CE; Tested to GOST (Russia);
Tested to SASO (Saudi Arabia); Tested to IRAM (Argentina); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty Period (Worldwide)
2-year limited warranty
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
6/6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising