Internal Compact Flash Memory Card in the

Internal Compact Flash Memory Card in
the EXTER Operator Panels
An internal Compact Flash memory card can be used in the EXTER K70, EXTER K100, EXTER T70, EXTER T100 and EXTER T150 operator panels for expansion of the project memory.
Note:
When using an internal Compact Flash memory card, no external Compact Flash memory card can
be used. An external USB Flash drive can be used for the same functions as an external Compact
Flash card.
Compact Flash cards of type I and II are supported.
Compact Flash cards of the following brands and models are recommended:
SiliconSystems SiliconDrive
SanDisk Industrial Grade
Cactus 203-, 302- and 303–series
Due to product changes and upcoming brands, other Compact Flash cards may be approved as
EXTER accessories even if they are not present in the above list.
Installation
Perform the following steps to install an internal Compact Flash card in the operator panel:
1. Turn off the power to the panel.
Note:
Make sure to use adequate ESD protection.
2. Remove the back cover on the panel, using a torx screwdriver (T10*50).
4 torx screws
1
3. Flip the back cover; the CPU board is mounted inside the back cover.
Product Information EN 0808
4. Insert the Compact Flash memory card in its slot on the CPU board.
Internal Compact Flash memory card slot
www.beijerelectronics.com
www.beijerelectronics.us
2008-12
PIEN153A
Page 1 (2)
Internal Compact Flash Memory Card in the EXTER Operator
Panels
5. Re-attach the back cover to the operator terminal.
6. Turn on the power to the operator terminal.
When the operator terminal starts up, you will be asked if you like to move the files to the internal card; select YES to this question.
Settings in Information Designer
The size of the internal memory card must be entered in the configuration tool for the operator
panel.
1. Select Setup/Terminal Options.
2. Enter the size of the internal memory card under Memory card settings/Internal.
3. Click OK to close the dialog.
www.beijerelectronics.com
www.beijerelectronics.us
2008-12
PIEN153A
Page 2 (2)

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project