GEIGER-VariousWireless - GEIGER Antriebstechnik

GEIGER-VariousWireless - GEIGER Antriebstechnik
Product data sheet
GEIGER-VariousWireless –
The all-rounder
Contents
Problem and solution ..................................1
Design and features .....................................2
GEIGER Soft-functions..................................2
Functions ..........................................................2
Setting the end stops....................................3
Technical data..................................................4
■■Problem and solution
Assembly efficiency
Problem:
Radio motors offer much flexibility. And
yet the different installation situations may
require to use different types of motors.
Solution:
The all-rounder GEIGER-Various­Wireless
solves this problem!
It is optimally suited for operation with
rolling shutters, folding arm awnings and
screens and provides another substantial
increase in flexibility.
GEIGER-VariousWireless
Application fields
• Rolling shutters with and with­out
stoppers / anti-lift device
• Open style folding arm awnings
• Facade awnings
• Screens
Lifetime of the rolling shutter system
Problem:
Rolling shutter systems are exposed to
extreme conditions such as sun, wind
and temperature. Moreover many s­ hutter
drives set the curtain under permanent
tensile stress: this can over time damage
the whole system.
Solution:
The GEIGER-VariousWireless has an
intelligent curtain protection function.
It protects the curtain from unnecessary
tension. The rolling shutter remains in
shape much longer – technically and
optically.
GEIGER anti-lift device
One motor for all situations
Problem:
Each rolling shutter is different: either with
upper and lower stop or without stops or
with one stop only. Awnings generally have
no stops for the extended position. Various
types of motors are required to cover the
different situations.
Solution:
The GEIGER-VariousWireless is best
suited for all situations.
Stops and anti-lift device can be used – but
are not obligatory. Maximum versatility is
guaranteed.
Available with 2 or 3 elements
for mini and maxi profiles
Made by GEIGER
GEIGER relies on Germany as
production location:
the GEIGER SOLIDline, like all
GEIGER motors, is developed and
produced in Germany.
This situation allows an optimal
combination of R & D, manu­
facturing processes and quality
management.
Our clients benefit from:
• L ow noise motors
• Low energy consumption,
a big plus factor today
• Low heating of the engine
and therefore an unusual long
running time
■■Design and features
The GEIGER-VariousWireless meets several market requirements in a quite unusual
way:
ffInstallation with manual positioning or
ffInstallation with automatic position detection (Plug & Play)
ffProtection of the rolling shutter and awning systems with Soft-functions
… a well-conceived system: GEIGER-VariousWireless
■■GEIGER Soft-functions
Plug & Play
The GEIGER-VariousWireless simplifies the installation significantly: only one o
­ peration
to the upper and the lower end stop for the rolling shutters with stops and anti-lift device.
Done! Plug & Play!
Soft motor intelligence
The GEIGER-VariousWireless has a very sensitive intelligence which provides the typical
GEIGER „soft shutdown“ in the end positions, in order to achieve optimal protection of the
curtain.
Soft position
Torque shutdowns stress the rolling shutter system more than position shutdowns. Therefore, the GEIGER-VariousWireless uses torque shutdowns only when ­absolute necessary.
Torque shutdowns in the upper end position are only made for the p
­ rogramming run and
the reference runs after 50 cycles. After installation, there are no further torque shutdowns
in the lower end position.
When the end stops are reached, the curtain is no longer submitted to tensile loading –
in 98% of the cases. Damages to the system are thus avoided. M
­ oreover, a freezing over
night of an angle end bar in the upper end position can also be prevented.
■■Functions
Programming the end positions
The programming of the end positions is accomplished through a very sensitive torque
shutdown or through fixed positioning.
Checking the end positions
The correction of the end positions is also accomplished through a sensitive torque
shutdown with reference runs after the first 5 and 20 cycles and then after 50 ­cycles.
Between these reference runs the curtain stops a few millimeters before the shutter box
is reached in the upper end position so that there is no permanent tensile load on the
curtain.
2
Subject to technical modifications | 100W1511 en 0617
Antifreeze protection
SOLIDline motor heads
The GEIGER-VariousWireless is equipped with an antifreeze protection in UP d
­ irection.
The situation «curtain frozen to the window sill overnight» is recognized by the system
and the curtain will not be damaged.
All SOLIDline motors are available
with four different motor heads:
The GEIGER-Soft position also prevents the contact between bottom bar and box so that
a freezing problem in the DOWN direction is excluded.
Obstacle detection
The GEIGER-VariousWireless has a sensitive obstacle detection in UP direction and a
blocking detection in DOWN direction.
An obstacle detection in DOWN direction is available upon request and in c­ oordination
with our customers. This provides an extra safety protection especially in relation with
balcony and patio doors.
Intermediate position
An intermediate position can be used with the GEIGER-VariousWireless. The ­customer
can set it or change it in a very easy way with the remote control.
Setting the end stops
■
■
The GEIGER-VariousWireless gives the technician the opportunity to react flexibly to the
assembly situation on site.
The GEIGER-VariousWireless always fits – whether open style folding arm awnings or
rolling shutters.
Following options are available:
The rolling shutter is equipped with:
Following settings are possible:
End bar with stopper
with anti-lift device
Upper end stop: automatic
Lower end stop: automatic
End bar without stopper
with anti-lift device
Upper end stop: free positioning
Lower end stop: automatic
End bar with stopper
without anti-lift device
Upper end stop: automatic
Lower end stop: free positioning
End bar without stopper
without anti-lift device
Upper end stop: free positioning
Lower end stop: free positioning
The awning is equipped with:
Following settings are possible:
Awning arm used as stop
Upper end stop: automatic
Lower end stop: free positioning
No stops are used
Upper end stop: free positioning
Lower end stop: free positioning
Subject to technical modifications | 100W1511 en 0617
• The extremely narrow KS motor
head made of plastic is best
suited for all GEIGER fixation
systems in order to provide quick
and easy assembly/disassembly
with low space requirement.
• The extremely thin COM ­motor
head – the cloth can also be
wound on the motor head –
offers the possibility to optimize
the fabric width for screens and
facade awnings. The sun protection system can be designed
independently from the selected
drive. Light slots should be minimized or avoided altogether –
as in ZIP screens.
• The SOC motor head is ­optimally
designed for i­nstallation with star
shaped fixation systems.
The motor head is universally
applicable in the rolling shutter
area also together with traditional f­ astening systems.
• With the SIL motor head GEIGER
has found a new solution in order
to prevent noise emis­sions. Due
to special bearings with rubber
inserts noise and vibration are
not transmitted in the system
and the masonry.
3
■■Technical data
Technical data of tubular motor SOLIDline-KS (GU45..)
GU4510
GU4520
GU4530
Voltage
230 V~/50 Hz
Current
0,47 A
0,63 A
0,8 A
Cos Phi (cosj)
>0,95
Inrush current (factor)
x 1,2
Power
105 W
140 W
180 W
Torque
10 Nm
20 Nm
30 Nm
Speed
16 rpm
16 rpm
16 rpm
Protection class
IP 44
Total length1)
516,5 mm
546,5 mm
566,5 mm
Operating mode
S2 4 min
S2 5 min
S2 4 min
Sound pressure level2)
39 dB(A)
41 dB(A)
41 dB(A)
Diameter
45 mm
Weight
approx
approx
approx
1,90 kg
2,20 kg
2,40 kg
Storage temperature/Humidity T = -15°C .. +70°C / dry and non-condensing place
GU4540
GU45503)
1,0 A
1,0 A
220 W
40 Nm
16 rpm
220 W
50 Nm
12 rpm
586,5 mm
S2 4 min
43 dB(A)
586,5 mm
S2 4 min
-
approx
2,70 kg
approx
2,70 kg
SOLIDline-COM: + 3,5 mm / SOLIDline-SOC: + 3 mm / SOLIDline-SIL: ± 0 mm (without trunnion)
1)
The average sound pressure level data are intended for guidance only. The values were determined by GEIGER at a distance of 1 m, with a hanging motor at idle speed
and averaged over 10 seconds. There is no reference to any specific test standard.
2)
GU4550 is only available with motor head KS and SOC and CE-certification.
3)
V
DE
Torque characteristics
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
GU4506
GU4510
GU4520
GU4530
GU4540
GU4550
geprüfte
Sicherheit
Torque shutter
7
GU4506
GU4510
GU4520
GU4530
GU4540
GU4550
Tube:
60er octa.
Slat thickness: 14 mm
Hanging weight: 5.1 kg/m2
6
Height [m]
5
4
3
2
0
5
10
Speed [r/min.]
15
20
1
1
2
3
4
Width [m]
5
6
7
The name GEIGER Antriebstechnik is synonymous
world­wide for drive solutions in the sun protection
area.
Today we are with more than 300 employees one
of the leading manufacturers of mechanical and
electrical drives for Venetian blinds, awnings and
rolling shutters.
GEIGER is a well-known, mid-sized company which
offers world­wide drive components for the sun
protection systems.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6, D-74321 Bietigheim-Bissingen
Phone: +49 (0) 71 42 / 938-0, Fax: +49 (0) 71 42 / 938-230
E-Mail: info@geiger.de, Internet: www.geiger.de
100W1511 en 0617
Torque [Nm]
Subject to technical modifications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising