H.264 Video Encoder Series VGE-264 | H.264 Video Encoder Series SDE-264 | H.264 Video Encoder Series ADE-264 | H.264 Video Encoder Series ADE-4264 | H.264 Video Encoder Series SDE-4264 | 19” 1 RU Encoder Series HDE-1265 | IRENIS H.264 Video Encoder Series HDE-264, VGE-264, SDE-264, ADE-264, VHE-264, HDE-16264, ADE-16264, HDE-4264, ADE-4264, SDE-4264, 19” 1 RU Encoder Series ADE-1264, HDE-1265, SDE-1265, H.265 (HEVC) Video Encoder Series HDE-265, SDE-265, VDE-265 User Manual

H.264/H.265 (HEVC)

IPTV ENCODER & STREAMER

SERIES

OVERVIEW AND QUICK START

USER MANUAL

IRENIS Encoder & Streamers | User Manual

Thank you for choosing our products. Please contact us if you have any question

– see last page

This manual applies to the following models:

HDE-264

VGE-264

SDE-264

ADE-264

H.264 Video Encoder Series

One channel HDMI H.264 encoder



Support H.264Baseline Profile / H.264Main

Profile / H.264High Profile



Support up to 720P, 1080P HD video input



Support HDCP protocol and HD blue-ray



Support 1080P@60fps



Support protocol HTTP, UTP, RTSP, RTMP,

ONVIF, HLS

One channel VGA H.264 encoder










Support 1080P@60fps




ONVIF

One channel SDI H.264 encoder ,with one channel SDI looping out










Support 1080P@60fps




ONVIF, HLS

Mini HDMI+CVBS H.264 video encoder













Support 1080P@60fps




ONVIF

Author: Rri, May 2017, Version: V1.22

2


VHE-264

HDE-16264

ADE-16264

HDE-4264

H.264 HDMI+VGA decoder

• H.264Baseline/High/Main Profile decoding

• MJPEG/JPEG Baseline decoding

• Audio decoding MPEG1 Audio Layer 2

• Support Network interface full-duplex mode 100M

• 1 channel HDMI/vga/audio output

• Support up to 1080P/60hz HD video output

• Support HTTP, UTP, RTSP protocol

16 channels HDMI H.264 encoder in rack













Support 1080P@60fps




ONVIF

16 channels HDMI + CVBS H.264 encoder in rack













Support 1080P@60fps




ONVIF

4 channels HDMI H.264 video encoder













Support 1080P@60fps




ONVIF



Dimensions : 430mm x 250mm x 45mm

(LxWxH)



Net Weight: 3KG


3


ADE-4264

SDE-4264

4 channels HDMI + CVBS H.264 video encoder













Support 1080P@60fps




ONVIF




(LxWxH)



Net Weight: 3KG

4 channels SDI H.264 video encoder










Support 1080P@60fps




ONVIF




(LxWxH)



Net Weight: 3KG


4


ADE-1264

HDE-1265

SDE-1265

HDE-4264

19

” 1 RU Encoder Series

H.264 Video Encoder into 1 RU case with

HDMI input+BNC input+Independent Audio



Support 1080P@60fps



Single channel IP output



Support HTTP,RTMP,RTSP,UDP,ONVIF protocol



Support unicast and multicast


HDMI input



Support H.264BP/MP/HP



Support H.265 Main Profile










ONVIF, HLS



Support 1080p@60fps


SDI input
















ONVIF, HLS



Support 1080p@60fps


4CH HDMI input



Support 1080P@60fps



4 channel IP output



Support HTTP,RTMP,RTSP,UDP,ONVIF protocol



Support unicast and multicast


5


HDE-265

SDE-265

VDE-265

HDE-1265

H.265 (HEVC) Video Encoder Series

One channel H.265 HDMI video encoder
















ONVIF, HLS



Support 1080p@60fps

One channel H.265 SDI video encoder
















ONVIF, HLS



Support 1080p@60fps

One channel H.265 VGA video encoder
















ONVIF, HLS



Support 1080p@60fps


HDMI input
















ONVIF, HLS



Support 1080p@60fps


6


SDE-1265


SDI input
















ONVIF, HLS



Support 1080p@60fps


7


SWE-264

H.264/H.265 Wireless Video Encoder Series

1 channel SDI input encoder



Connect the internet by Wifi or ethernet port



1 Channel SDI input;



1 channel SDI loop output.



Same specification as SDE-264

SWE-265

1 channel H.265 SDI video encoder with 1 channel SDI loop out with wifi



Connect the internet by Wifi or ethernet port
















ONVIF, HLS



Support 1080p@60fps

One channel HDMI H.264 encoder with wifi

HWE-264



Support H.264Baseline Profile /H.264Main











ONVIF, HLS

Almost all models with ONVIF support can be used with following protocols:

“ONVIF S, “ONVIF C” or “ONVIF G”

Statement:

Text and pictures herein are subject to changes w/o notifications.

The user manual will be updated in real time without special notice.

This user manual is provided only as a reference guide for technicians as examples.


8


Default Values

The factory default administrator account:

The factory-default user password:

The factory default IP address:

admin

admin

192.168.0.31

Please change these account settings according to your local policy and network. -> Do not forget to safe and backup the configuration.

1 PRODUCT OVERVI EW

The H.264/H.265 Encoder is a hardware device used for high-definition video signal (up to 1080p HD resolution) encoding and network transmission, using the latest and high-efficient HD digital video compression technology H.264/H.265, with the characteristics of reliable, high-definition, low bitrate and low latency. Connect the HDMI/SDI/VGA high-definition video signal to start the encoding process, after the compression processing by the DSP chip, the output of the standard TS network stream can be started.

The launch of these devices fills the gap in the industry, which is a direct replacement for the traditional capture card for software coding method, using hard-coded chipsets, the system is more stable, and the picture quality is more perfect. They can be used in a wide variety of demands for high-definition video and high-resolution / high frame rate re-assembling for IP based network transmission. Its powerful scalability makes it more easier to respond to the needs of different industries and can be used as live video encoder. Industrial controlled, precision design, small size, easy installation, the power is less than 5W, which is energy-saving and more stable.

2 PRODUCT FEATURES



High-performance hardware encoding

 h.265 video coding efficiency (depending on Model, downward compatible to h.264)

 h.264 BP/MP/HP



AAC / G.711 Advanced Audio Coding format quality



CBR / VBR rate: 16Kbps ~ 12Mbps



1000Mbit/s network interface using full duplex mode



A mainstream and second stream can be sent to different IP-connections



Supports up to 720P, 1080P @ 60HZ HD video input



Support image parameter settings



HDCP protocol and Blu-ray



HTTP, UTP, RTSP, RTMP, RTP, ONVIF protocol



The mainstream and second stream can be used with different network protocol for their transmissions



WEB interface with 2 Languages: English and optional Chinese for Asian customers



Support remote management in WAN (WEB)



Support customized settings for the resolution



Support one step to restore the factory configuration



Support SDK / individual development


9
























3 APPLI CATI ONS

IPTV

Digital Signage

Video Conference

Hotel IPTV System

Live Broadcast Feeds

Campus IPTV System

IP Recording System

Medical video broadcast and recording system

Live video education system

IP Video Recording (DVR/NVR)

4G mobile broadcast HD front capturing

4 INTERF ACE DESCRI PTI ON

4.1 The interfaces of H.264HDMI encoder and WIFI encoder are the same

：

4.2 The interfaces of H.264SDI encoder and WIFI encoder are the same

：

4.3 H.264VGA Encoder

：


10


4.4 HDMI CVBS HD Encoder

：

4.5 The interfaces of H.265 HDMI encoder and WIFI encoder are the same

：

4.6 The interfaces of H.265 SDI encoder and WIFI encoder are the same

：

4.7 The interfaces of H.264VGA encoder and WIFI encoder are the same

：

From Left to Right:

A. Power input----- 12V/DC

（12V/1A，5V/2A optional）

B. RST=RESET button ------ useful to reset the device to factory defaults . After power on , hold it on for about 15 seconds to reset the device to default IP 192.168.0.31

C. AUDIO/Video input------ Input HD HDMI, SDI, VGA, Audio signals

D. 1000BaseT Ethernet port RJ45

E. Status Indicator

：

1) Will flash while holding on the reset button. Reset is successful when the light is off .

Slow Flashing show: Video input , image capturing and compression is normally working .

2) If the indicator light keeps on, the Video source acquisition and compression has some problem like resolution/format our of Input specification. Sync failed...


11


3) If the indicator flashes slowly but the output stream is not working , there might be a problem with the streaming server unit.

5 WEB SERVER SET TINGS

Step 1: Reset & initialization

Input the power supply to turn on encoder and hold a pin to press RST on the encoder for 10 seconds, it will be restarted and initialized. The default Route IP of the WEB-IF is 192.168.0.31 after initialization.

Step 2: Change the administrator’s computer IP

Set the administrator’s computer IP as: 192.168.0.* to avoid IP conflicting with the units own IP address IP 192.168.0.*: (use an IP setting “*” in the number range between 2-254 except 31)

Remark: .0 is often the network router, .1 often the Gateway of the used router.

Step 3: Login the menu with the web browser:

Enter 192.168.0.31 in URL address.

This default Address may vary depending on model. I.e. the

Default user Name: admin

Default password: admin


12


5.1

STATUS DİSPLAY

When you access to the web-interface, you can choose the language on the right top:

Chinese/English

Input status: when you input the HD signal source, it will show resolution of video input, if it’s blank here: No video input detected .

Main-stream Status: Showing the resolution of the main-stream you set and multicast address.

You can control the multicast address by VLC or other streaming software.

Second stream Status: Showing the resolution of the second-stream and its multicast address.

Main stream Live View: You can play the stream address by your computer if you installed i.e. the VLC Player software.


13


Second stream Live View: You can play the stream address by your computer if you installed the VLC.

CVBS Live View: You can play the stream address by your computer if you installed the VLC.

5.2 NETWORK SETTI NGS

You can set the network with either Ethernet or WIFI. Only devices with WIFI support can use a

WLAN connection.


14

IRENIS Encoder & Streamers | User Manual a. The Default IP of the device is 192.168.0.31. If IP setting is forgotten after changing. You can RST= reset it to default IP follow step 1 above. b. If you don’t need to use a network cable, and when you reboot the device, it will access to

WIFI status if it’s equipped with WIFI . Please kindly note the different features for wifi version .

Instruction of wifi network Setup: 3 different settings can be chosen

A. Ethernet: Only connected by ethernet (default configuration)

B. Wifi: Only connect with WLAN . Hint: If you entered the wrong password or SSID during

WIFI mode will cause the system being unable to connect to Wirelesss LAN. Opening the web-

Interface will fail. Please press the reset button to restore the default settings to solve the problem)

C. Auto: Automatically detect if you have ethernet or wifi connected.


15


5.3 MAI N ST REAM ENCODI NG SETT I NGS :

Main stream setting:



Enc type: h.264 & h.265 is optional ( note: h.264version can only use h.264)



Profile: baseline profile / main profile / high profile ( note: h.265 version choose main profile)



Frame rate: 5-60 (when the input resolution is 720i/50,1080i50, the frame rate will be set to 25)



Bitrate mode: VBR / CBR



Group of picture: 5-200, it shows picture quality, default setting is advisable



Bitrate: 16-1200K (Network bandwidth setting)

Note: You can modify the above parameters without rebooting the encoder


16


Main - Stream protocol settings:

HTTP:

HTTP port:

RTSP:

RTSP port:

Multicast IP:

Multicast port:

RTMP server IP:

RTMP server port:

RTMP app name:

RTMP stream name:

ONVIF :

/main enable/disable

1-65535 optional

/main enable/disable

1-65535 optional

232.255.42.42 disable/RTP/UDP optional

1-65535 optional can set by stream media server .

1-65535 optional can be set by yourself can be set by yourself enable/disable


17


5. 4

OSD SETTI NGS

(OV E RL AY A P I C TURE TO THE E NC ODE D S TRE AM )

Note:

You can insert two couples of words and 3 pictures simultaneously into the mainstream

Tex1 X:

Tex1 X:

0-1920 is optional, display the left and right position of the text

0-1080 is optional, display the up and down position of the text

Font1 size:

Alpha1:

Color1:

Bg1:

Tex1:

8-72 is optional

0-128 is optional, choose the color you want to display choose background color of the text on the video input the content of the text you want


18


OSD insertion Picture Setting

Picture1:

Pictures X:

Pictures Y:

Alphal:

disable/ enable (disable: no images , enable: insert the images)

4-1920 is optional to set the left and right position of the picture

4-1080 is optional to set the up and down position of the picture

0-128 is optional

Picture1 name:

display the name of the picture1

Upload picture1: choose to upload the image, supporting *.bmp format of the picture and limited filesize : less than 1Mbyte

Requirements





The settings of the three pictures to be inserted must be identical.

Transparent background of the picture setting: should be of RGB values: R－177，G－204，B－233

Picture quality setting

Brightness:

Contrast:

Hue:

Saturation:

0-100 is optional (to adjust the brightness of the image)

0-100 is optional (to adjust the contrast of the image)

0-100 is optional (to adjust the hue of the image)

0-100 is optional (to adjust the saturation of the image)


19


5.5 SECOND STREAM OUTPUT SETTI NGS

Note: The method of the setting is same with mainstream code setting:

5.6 CVBS ENCODING SETT I NGS


20


5.7 AUDI O ENCODI NG SETT I NGS

Audio bitrates: 48k, 64k, 128k, 160k, 192k, 256k

Audio type: AAC

Audio digital gain: 2x, 4x, 8x, used to adjust volume

Audio input mode: digital/analog

5.8 SYSTEM SETTING

Change password: You can modify the WEB-user password by this menu:


21


System information: Shows SerialNumber and firmware version .

(the serial numbers of the device are set by factory, if you want to modify it , please contact us)

Upgrade setting:

Note: Choose an appropriate zip rar file, (no need to unzip the file) . Do not refresh the webpage when you upgrade the system .

System setting: Reboot the device and reset the device to default parameters :


22


6 WIFI SETT INGS

Hint shown above: If you want to configure the HD encoder, you need to set the fixed IP of the computer first . See chapter above – similar to Ethernet Settings.

6.1 HD WI RELESS ENCODER SETT I NGS

Connect the HD Encoders by the network cable, then open the browser to enter the network setting chapter. Default setting as shown below can be modified to your needs:

Note:

1) Default IP of wifi can be 192.168.0.32 . When wifi connected successfully, you can access to web control panel by 192.168.0.32 .

2) Wifi Encryption : WPA/WPA2 (Note: Some wireless routers have different encryption mode, please select WPA/WPA2 for the encryption )

3) Input the password of the wireless router


23


7 TECHNI CAL SPEC I F ICATI ONS

Video

Input

Resolution

Encoding

HDMI, SDI, CVBS according to the chosen model

1920×1080_60i/60P, 1920×1080_50i, 1280×720_60p,

1280×720_50p and below

H.264/AVC Main Profile/High Profile ; H.265/HEVC Baseline

Profile; Audio AAC

0.8 Mbps ... 12 Mbps

CBR/VBR

IBBP

De-interlacing, Noise Reduction, Sharpening

Data Rate

Rate Control

GOP Structure

Advanced Pretreatment

Audio

Encoding

Sampling Rate

Bit-rate

Sampling Precision

Data Rate

System

System Support

Ethernet/RJ45

Protocol

Control Interface

Need Support?

AAC, MP3

Auto

48K/64K/96K/128K/160K/192K/256k

16 bit

64 Kbps ~ 384 Kbps

WINDOWS; LINUX

1000Base-T Ethernet interface

HTTP, UDP, RTP, RTSP, RTMP, ONVIF (prot.: S,C,G)

100baseT by WEB-Browser

IRENIS GmbH

Owiesenkehre 1

D-22177 Hamburg - Germany

Web: www.irenis.com

E-Mail: [email protected]

Technical Hotline: +49 40 22864848


24

H.264/H.265 (HEVC)

IPTV ENCODER & STREAMER

SERIES

OVERVIEW AND QUICK START

USER MANUAL

Default Values

Main stream setting:

Main - Stream protocol settings:

OSD insertion Picture Setting

Picture quality setting

Upgrade setting:

IRENIS GmbH

Owiesenkehre 1

D-22177 Hamburg - Germany

Key Features

Related manuals

Frequently Answers and Questions

What is the default IP address of the encoder?

How do I reset the encoder to factory defaults?

What video resolutions and frame rates are supported?

What audio codecs are supported?

What network protocols are supported?

H.264/H.265 (HEVC)

IPTV ENCODER & STREAMER

SERIES

OVERVIEW AND QUICK START

USER MANUAL

Default Values

Main stream setting:

Main - Stream protocol settings:

OSD insertion Picture Setting

Picture quality setting

Upgrade setting:

IRENIS GmbH

Owiesenkehre 1

D-22177 Hamburg - Germany

Key Features

Related manuals

Irenis

VHE-264

Dexin

NDS 3558B

Blankom

ADE-264

TBS

TBS2630-SDI

Irenis

HDE

VTS

VT-7104H

Blankom

ADE-264B

Blankom

HDE-264

KILOVIEW

E1-S

Blankom

VDE-265

Blankom

SDE-265

Blankom

HDE-264/265

Frequently Answers and Questions

What is the default IP address of the encoder?

How do I reset the encoder to factory defaults?

What video resolutions and frame rates are supported?

What audio codecs are supported?

What network protocols are supported?