Nokia N82 Silver
Nokia N82 User Guide
Issue 6
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-313 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nseries, N82, Navi, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
Ltd.
This product includes software licensed from Symbian Software Ltd © 1998-2008. Symbian and Symbian OS are trademarks of Symbian
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Portions of the Nokia Maps software are copyright © 1996-2008 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related
to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty
for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Issue 6
Contents
Contents
For your safety ..........................................10
About your device.........................................................11
Network services...........................................................12
Enhancements, batteries, and chargers.....................12
Get connected............................................14
Useful information.....................................15
Help.................................................................................15
Get started.....................................................................15
Nokia support and contact information.....................15
Additional applications................................................15
Software updates..........................................................16
Settings..........................................................................16
Access codes..................................................................16
Prolong battery life.......................................................17
Free memory.................................................................18
Your device.................................................20
Welcome........................................................................20
Switch.............................................................................20
Transfer content.........................................................20
Synchronise, retrieve, or send content....................21
Display indicators..........................................................22
Fast downloading.........................................................23
Lock the keypad............................................................23
Shortcuts........................................................................24
Multimedia menu..........................................................24
Mobile Search................................................................25
N-Gage............................................................................25
About N-Gage..............................................................25
N-Gage views..............................................................26
Get started..................................................................27
Create a player name..............................................27
Start a game.............................................................27
Track your progress.................................................27
Play with friends......................................................28
Play and manage games...........................................28
Edit profile details......................................................28
Connect with other players.......................................29
Find and add friends...............................................29
View friend information.........................................29
Sort friends list.........................................................29
Rate a player............................................................30
Send messages........................................................30
N-Gage settings..........................................................30
Headset..........................................................................31
Volume and loudspeaker control................................31
Offline profile.................................................................32
Camera.......................................................33
About the camera.........................................................33
Image capture...............................................................33
Still image camera indicators...................................33
Active toolbar.............................................................34
Take pictures..............................................................35
After taking a picture.................................................36
Location information.................................................36
Flash.............................................................................37
Scenes..........................................................................37
Gallery........................................................45
View and organise files................................................45
Images and video clips.................................................46
View images and videos............................................46
Organise images and videos.....................................46
Active toolbar.............................................................47
Albums.........................................................................47
Print basket.................................................................48
Slide show...................................................................48
Edit images....................................................................48
Image editor...............................................................48
Crop image..................................................................49
Reduce red-eye...........................................................49
Useful shortcuts..........................................................49
Edit videos.....................................................................49
TV-out mode..................................................................50
Presentations................................................................51
Print images..................................................................51
Image print.................................................................51
Printer selection......................................................51
Print preview...........................................................51
Print settings............................................................52
Print online.................................................................52
Share images and videos online..................................52
Home network...............................................................53
About home network.................................................53
Important security information................................53
Settings for home network.......................................54
Set sharing on and define content...........................54
View and share media files.......................................55
Copy media files.........................................................56
Positioning (GPS)........................................57
About GPS.......................................................................57
GPS receiver...................................................................58
About satellite signals..................................................58
Position requests..........................................................59
Maps...............................................................................59
About Maps.................................................................59
Browse maps..............................................................60
Download maps..........................................................62
Find a place.................................................................63
Extra services for Maps..............................................63
Navigation................................................................64
Traffic information..................................................65
Guides.......................................................................65
Landmarks.....................................................................66
GPS data.........................................................................67
Route guidance..........................................................67
Retrieve position information..................................67
Trip meter...................................................................68
Web browser..............................................69
Browse the web............................................................69
Browser toolbar............................................................70
Navigate pages..............................................................71
Contents
Take pictures in a sequence......................................37
You in the picture—self-timer..................................38
Tips on taking good photographs............................38
Video recording.............................................................39
Video capture indicators...........................................39
Record videos.............................................................40
After recording a video..............................................41
Camera settings.............................................................41
Still image camera settings.......................................42
Setup settings—adjust colour and lighting............42
Video settings.............................................................43
Contents
Web feeds and blogs....................................................71
Widgets..........................................................................71
Content search...............................................................72
Download and purchase items....................................72
Bookmarks.....................................................................72
Empty the cache............................................................73
End the connection.......................................................73
Connection security......................................................74
Web settings..................................................................74
Connections................................................76
Wireless LAN..................................................................76
About WLAN................................................................76
WLAN connections......................................................76
WLAN wizard...............................................................77
WLAN internet access points.....................................77
Operating modes........................................................78
Connection manager....................................................78
Active data connections.............................................78
Available WLAN networks..........................................78
Bluetooth connectivity.................................................79
About Bluetooth connectivity...................................79
Settings.......................................................................79
Security tips................................................................80
Send data using Bluetooth connectivity..................80
Pair devices.................................................................81
Receive data using Bluetooth connectivity.............81
Remote SIM mode......................................................81
USB..................................................................................82
PC connections..............................................................82
Nokia Video Centre.....................................83
Find and view videos....................................................83
Internet videos..............................................................84
Play downloaded videos..............................................84
Transfer videos from your PC.......................................84
Settings..........................................................................85
Music folder................................................86
Music player...................................................................86
Play a song or a podcast episode.............................86
Music menu.................................................................87
Playlists.......................................................................87
Podcasts......................................................................88
Home network with music player............................88
Transfer music to your device...................................89
Transfer music from PC...........................................89
Transfer with Windows Media Player....................89
Nokia Music Store..........................................................90
Radio..............................................................................91
Listen to the radio......................................................91
View visual content....................................................92
Saved stations.............................................................92
Settings.......................................................................92
Nokia Podcasting..........................................................92
Settings.......................................................................93
Search..........................................................................94
Directories...................................................................94
Downloads..................................................................95
Play and manage podcasts........................................95
Media folder...............................................97
RealPlayer .....................................................................97
Play video clips...........................................................97
Stream content over the air......................................97
RealPlayer settings.....................................................97
Adobe Flash Player........................................................98
Nokia Lifeblog...............................................................98
Personalise your device...........................101
Themes.........................................................................101
Profiles—set tones.....................................................101
3-D tones......................................................................102
Modify the standby mode..........................................103
Modify the main menu...............................................103
Time management...................................104
Clock ............................................................................104
Alarm clock................................................................104
World clock...............................................................104
Calendar.......................................................................105
Create a calendar entry............................................105
Calendar views.........................................................105
Manage calendar entries.........................................106
Messaging................................................107
Messaging main view.................................................107
Write text.....................................................................108
Traditional text input..............................................108
Predictive text input................................................108
Tips on text input.....................................................109
Change the writing language.................................109
Edit text and lists......................................................109
Write and send messages..........................................109
Messaging inbox.........................................................111
Receive messages....................................................111
Multimedia messages..............................................111
Data, settings, and web service messages............112
Mailbox.........................................................................112
Define the e-mail settings.......................................112
Open the mailbox.....................................................113
Retrieve e-mail messages.......................................113
Delete e-mail messages...........................................114
Disconnect from the mailbox..................................114
View messages on a SIM card....................................114
Messaging settings.....................................................114
Text message settings.............................................114
Multimedia message settings.................................115
E-mail settings..........................................................116
Manage mailboxes................................................116
Connection settings..............................................116
User settings..........................................................117
Retrieval settings..................................................117
Automatic retrieval settings................................118
Web service message settings................................118
Cell broadcast settings.............................................118
Other settings...........................................................119
Make calls.................................................120
Voice calls....................................................................120
Options during a call...................................................120
Voice and video mailboxes........................................121
Answer or decline a call.............................................121
Make a conference call...............................................121
Speed dial a phone number.......................................122
Call waiting..................................................................122
Voice dialling...............................................................122
Make a video call.........................................................123
Options during a video call........................................124
Answer or decline a video call...................................124
Video sharing..............................................................125
Requirements...........................................................125
Settings.....................................................................125
Share live video or video clips................................126
Contents
Activation keys..............................................................98
Recorder.........................................................................99
Contents
Accept an invitation.................................................127
Internet calls................................................................127
Create an internet call profile.................................128
Connect to the internet call service........................128
Make internet calls ..................................................129
Service settings........................................................129
Log................................................................................130
Recent calls...............................................................130
Call duration.............................................................130
Packet data...............................................................130
Monitor all communication events........................130
Contacts (phonebook)..............................132
Save and edit names and numbers...........................132
Manage names and numbers....................................132
Default numbers and addresses................................133
Add ringing tones for contacts..................................133
Copy contacts..............................................................133
SIM directory and other SIM services........................134
Manage contact groups..............................................134
Office folder..............................................136
Quickoffice...................................................................136
Quickword.................................................................136
Quicksheet................................................................136
Quickpoint.................................................................136
Quickmanager..........................................................137
Notes............................................................................137
Adobe PDF reader........................................................137
Converter.....................................................................137
Zip manager................................................................138
Barcode reader............................................................138
Applications folder...................................140
Calculator.....................................................................140
Application manager..................................................140
Install applications and software ..........................141
Remove applications and software........................142
Settings.....................................................................142
Tools folder..............................................144
File manager................................................................144
Memory card tool........................................................144
Voice commands.........................................................144
Sync..............................................................................145
Device manager..........................................................145
Settings....................................................147
General settings..........................................................147
Personalisation settings..........................................147
Enhancement settings.............................................148
Security settings.......................................................149
Phone and SIM.......................................................149
Certificate management.......................................150
Security module.....................................................151
Restore original settings.........................................151
Positioning settings.................................................151
Phone settings............................................................152
Call settings...............................................................152
Call divert..................................................................153
Call barring................................................................153
Network settings......................................................154
Connection settings....................................................154
Data connections and access points......................154
Access points............................................................155
Create a new access point....................................155
Packet data access points.....................................155
WLAN internet access points................................156
Troubleshooting......................................160
Battery information.................................164
Charging and discharging..........................................164
Nokia battery authentication guidelines.................165
Authenticate hologram...........................................165
What if your battery is not authentic?...................165
Care and maintenance.............................167
Disposal........................................................................168
Additional safety information.................169
Small children..............................................................169
Operating environment..............................................169
Medical devices...........................................................169
Implanted medical devices.....................................169
Hearing aids..............................................................170
Vehicles........................................................................170
Potentially explosive environments.........................171
Emergency calls...........................................................171
Certification information (SAR)..................................172
Index........................................................173
Contents
Packet data settings................................................157
Wireless LAN settings..............................................158
SIP settings...............................................................158
Internet call settings................................................158
Configurations..........................................................158
Access point name control......................................159
Application settings....................................................159
For your safety
For your safety
Read these simple guidelines. Not following them
may be dangerous or illegal. Read the complete user
guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off
near medical equipment.
SWITCH OFF IN AIRCRAFT
10
Follow any restrictions. Wireless devices can
cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do
not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the
device where blasting is in progress.
USE SENSIBLY
Use only in the positions as explained in the
product documentation. Do not touch the
antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
Remember to make back-up copies or keep
a written record of all important information
stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read
its user guide for detailed safety
instructions. Do not connect incompatible
products.
EMERGENCY CALLS
Ensure the phone function of the device is
switched on and in service. Press the end key
as many times as needed to clear the display
and return to the standby mode. Enter the
emergency number, then press the call key.
Give your location. Do not end the call until
given permission to do so.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, and 1900 and
UMTS 2100 networks. Contact your service provider for
more information about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protections may prevent some images,
music (including ringing tones), and other content
from being copied, modified, transferred, or
forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device
may be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise
caution and open messages, accept connectivity
requests, download content, and accept installations
only from trustworthy sources. To increase the security
of your devices, consider installing, using, and
regularly updating antivirus software, firewall, and
other related software on your device and any
connected computer.
For your safety
BACK-UP COPIES
Warning: To use any features in this device,
other than the alarm clock, the device must be
switched on. Do not switch the device on when
wireless device use may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
During extended operation, such as an active video
sharing session or high-speed data connection, the
device may feel warm. In most cases, this condition is
normal. If you suspect the device is not working
11
For your safety
properly, take it to the nearest authorized service
facility.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
The images in this guide may differ from your device
display.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
12
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as MMS, browsing, and e-mail require
network support for these technologies.
Enhancements, batteries,
and chargers
Always switch the device off and disconnect the
charger before removing the battery.
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the DC-4, AC-4, or AC-5
charger and from an AC-1, ACP-8, ACP-9, ACP-12, or
LCH-12 charger when used with the CA-44 charger
adapter.
The exact charger model number may vary depending
on the type of plug. The plug variant is identified by
one of the following: E, EB, X, AR, U, A, C, or UB.
The battery intended for use with this device is
BP-6MT.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
For availability of approved enhancements, please
check with your dealer. When you disconnect the
power cord of any enhancement, grasp and pull the
plug, not the cord.
For your safety
invalidate any approval or warranty, and may be
dangerous.
13
Get connected
Get connected
Nokia N82 supports the following connectivity
methods:
● 2G and 3G networks
● Bluetooth connectivity — to transfer files and
connect to compatible enhancements. See
"Bluetooth connectivity", p. 79.
● Nokia AV Connector (3.5 mm) — to connect to
compatible headsets, headphones, TVs, or home
stereo sets. See "TV-out mode", p. 50.
● USB data cable — to connect to compatible
devices, such as printers and PCs. See
"USB", p. 82.
● Wireless LAN (WLAN) — to connect to the internet
and WLAN enabled devices. See "Wireless
LAN", p. 76.
● GPS — to connect to GPS satellites to measure
your location. See "Positioning (GPS)", p. 57.
14
Model number: Nokia N82-1
Hereinafter referred to as Nokia N82.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to
access help for the current view.
When you are reading the instructions, to switch
between help and the application that is open in the
background, press and hold
.
To open help from the main menu, select Tools >
Utilities > Help. Select the desired application to
view its help topics.
Get started
See the get started guide for keys and parts
information, instructions for setting up the device
and for other essential information.
Nokia support and contact
information
Check www.nseries.com/support or your local
Nokia website for the latest guides, additional
information, downloads, and services related to
your Nokia product.
Useful information
Useful information
If you need to contact customer service, check the
list of local Nokia Care contact centres at
www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia
Care point at www.nokia.com/repair.
Additional applications
There are various applications provided by Nokia
and different third-party software developers that
help you do more with your device. These
applications are explained in the guides that are
available on the product support pages at
www.nseries.com/support or your local Nokia
website.
15
Useful information
Software updates
Nokia may produce software updates that may offer
new features, enhanced functions, or improved
performance. You may be able to request these
updates through the Nokia Software Updater PC
application. To update the device software, you
need the Nokia Software Updater application and a
compatible PC with Microsoft Windows 2000, XP, or
Vista operating system, broadband internet access,
and a compatible data cable to connect your device
to the PC.
To get more information and to download the Nokia
Software Updater application, visit
www.nokia.com/softwareupdate or your local
Nokia website.
Tip: To check the software version in your
device, enter *#0000# in the standby mode.
Settings
16
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured
in the device, based upon your network service
provider information. You may have settings from
your service providers already installed in your
device, or you may receive or request the settings
from the network service providers as a special
message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings. See "General
settings", p. 147.
Access codes
If you forget any of the access codes, contact your
service provider.
● Personal identification number (PIN) code — This
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
● UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
phones.
● PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
● Lock code (also known as security code) — The
lock code helps you to protect your device
against unauthorised use. You can create and
change the code, and set the device to request
the code. Keep the new code secret and in a safe
place separate from your device. If you forget the
Prolong battery life
Many features in your device increase the demand
on battery power and reduce the battery life time.
To save battery power, note the following:
● Features that use Bluetooth technology, or
allowing such features to run in the background
while using other features, increase the demand
on battery power. Turn Bluetooth technology off
when you do not need it.
● Features that use wireless LAN (WLAN), or
allowing such features to run in the background
while using other features, increase the demand
on battery power. WLAN on your Nokia device
switches off when you are not trying to connect,
not connected to an access point, or not scanning
for available networks. To further reduce battery
consumption, you can specify that your device
does not scan, or scans less often, for available
networks in the background. See "Wireless
LAN", p. 76. When Scan for networks is set to
Never, the WLAN availability icon is not shown
in the standby mode. However, you can still
manually scan for available WLAN networks and
connect to WLAN networks as usual.
Useful information
code and your device is locked, your device will
require service and additional charges may
apply. For more information, contact a Nokia Care
point or your device dealer.
● Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
● UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.
● If you have set Packet data connection to
When available in connection settings, and
there is no packet data coverage (GPRS), the
device periodically tries to establish a packet
data connection. To prolong the operating time
of your device, select Packet data connection >
When needed.
● The Maps application downloads new map
information when you scroll to new areas on the
map, which increases the demand on battery
power. You can prevent the automatic download
of new maps. See "Maps", p. 59.
● If the signal strength of the cellular network
varies much in your area, your device must scan
for the available network repeatedly. This
increases the demand on battery power.
If the network mode is set to dual mode in the
network settings, the device searches for the
17
Useful information
UMTS network. To only use the GSM network,
press
, and select Tools > Settings >
Phone > Network > Network mode >
GSM.
● The backlight of the display increases the
demand on battery power. In the display
settings, you can change the time-out after
which the backlight is switched off, and adjust
the light sensor that observes lighting conditions
and adjusts the display brightness. Press
, and
select Tools > Settings > General >
Personalisation > Display and Light timeout or Light sensor.
● Leaving applications running in the background
increases the demand on battery power. To close
the applications you do not use, press and hold
, scroll to an application in the list, and press
C.
Pressing C does not close Music player. To close
Music player, select it from the list and Options >
Exit.
Free memory
18
Many features of the device use memory to store
data. The device notifies you if the device or the
memory card (if available) memory is low.
To view the types of data you have in the device and
how much memory the different data types
consume, press
, and select Tools > File
mgr. > Options > Memory details. The amount
of available memory is shown in Free memory.
To free device memory, transfer data to a
compatible memory card (if available) or to a
compatible PC.
To remove data to free memory, use File manager
to delete files you no longer need, or go to the
respective application. You can remove the
following:
● Messages in the folders in Messaging and
retrieved e-mail messages from the mailbox
● Saved web pages
● Contact information
● Calendar notes
● Applications shown in Application manager that
you do not need
● Installation files (.sis or .sisx) of applications you
have installed to a compatible memory card (if
available).
● Images and video clips in Gallery. Back up the files
to a compatible PC using Nokia Nseries PC Suite.
If you are deleting multiple items and one of the
following notes is shown, delete items, one by one,
beginning with the smallest item:
● Memory low. Delete some data from phone
memory.
Useful information
● Not enough memory to perform operation.
Delete some data first.
19
Your device
Your device
Welcome
Switch
Select from the following:
With the Switch application, you can transfer
content, such as contacts, between two compatible
Nokia devices using Bluetooth connectivity.
When you switch on your device, the Welcome
application is displayed.
● Sett. wizard — to configure various settings,
such as e-mail. For more information on the
Settings wizard application, see the guides
available at the Nokia product support pages or
your local Nokia website.
● Switch — to transfer content, such as contacts
and calendar entries, from a compatible Nokia
device. See "Transfer content", p. 20.
There may also be a demonstration about your
device available in the Welcome application.
To access the Welcome application later, press
,
and select Tools > Utilities > Welcome. You can
also access the individual applications from their
menu locations.
20
Transfer content
The type of content that can be transferred depends
on the model of the device from which you want to
transfer content. If the other device supports
synchronisation, you can also synchronise data
between the other device and your device. Your
device notifies you if the other device is not
compatible.
If the other device cannot be powered on without
a SIM card, you can insert your SIM card in it. When
your device is switched on without a SIM card, the
offline profile is automatically activated.
Transfer content
1. To retrieve data from the other device for the
first time, on your device, select Switch in the
Welcome application, or press
, and select
Tools > Utilities > Switch.
3. If you select Bluetooth connectivity: To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device
from which you want to transfer content. You
are asked to enter a code on your device. Enter
a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK.
The devices are now paired. See "Pair
devices", p. 81.
For some device models, the Switch application
is sent to the other device as a message. To
install the Switch application on the other
device, open the message, and follow the
instructions on the display.
4. From your device, select the content you want to
transfer from the other device.
Once the transfer has started, you can cancel it
and continue later.
Transferring time depends on the amount of data
to be transferred.
Content is transferred from the memory of the other
device to the corresponding location in your device.
Synchronise, retrieve, or send
content
After the first transfer, select from the following to
start a new transfer, depending on the model of the
other device:
to synchronise content between your device
and the other device, if the other device supports
synchronisation. The synchronisation is two-way. If
an item is deleted in one device, it is deleted in both.
You cannot restore deleted items with
synchronisation.
Your device
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
to retrieve data from the other device to your
device. With retrieval, data is transferred from the
other device to your device. You may be asked to
keep or delete the original data in the other device,
depending on the device model.
to send data from your device to your other
device
If Switch cannot transfer an item, depending on the
type of the other device, you can add the item to the
Nokia folder to C:\Data\Nokia or E:\Data\Nokia
and transfer it from there. When you select the
folder to transfer, the items are synchronised in the
corresponding folder in the other device, and vice
versa.
21
Your device
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with
the transfer settings to the main view to repeat the
same transfer later.
To edit the shortcut, scroll to it, and select
Options > Shortcut settings. You can, for
example, create or change the name of the shortcut.
A transfer log is shown after every transfer. To view
the log of a previous transfer, scroll to a shortcut in
the main view, and select Options > View log.
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a
transfer conflict. Select Check one by one, Priority
to this phone, or Priority to other phone to solve
the conflict. For further instructions, select
Options > Help.
Display indicators
The device is being used in a GSM network
(network service).
The device is being used in a UMTS network
(network service).
22
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder.
You have missed calls.
The ringing type is set to silent, and the message
alert tone and e-mail alert tone are set to off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network
service).
All calls to the device are diverted to another
number (network service). If you have two phone
lines, a number indicates the active line.
A compatible headset is connected to the device.
A compatible TV out cable is connected to the
device.
A compatible text phone is connected to the
device.
A data call is active (network service).
A GPRS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
A packet data connection is active in a part of the
network that supports EGPRS (network service).
Fast downloading
High-speed downlink packet access (HSDPA) is
supported and active (network service). indicates
the connection is on hold and that a connection
is available. See "Fast downloading", p. 23.
High-speed downlink packet access (HSDPA, also
called 3.5G, indicated by
) is a network service
in UMTS networks and provides high-speed data
downloads. When HSDPA support in the device is
activated and the device is connected to a UMTS
network that supports HSDPA, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster. An
active HSDPA connection is indicated by . See
"Display indicators", p. 22.
A wireless LAN connection is active in a
network that has encryption.
For availability and subscription to data connection
services, contact your service provider.
A UMTS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
You have set the device to scan for wireless LANs,
and a wireless LAN is available (network service).
See "About WLAN", p. 76.
A wireless LAN connection is active in a network
that does not have encryption.
Bluetooth connectivity is on. See "Bluetooth
connectivity", p. 79.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
A USB connection is active.
Your device
indicates the connection is on hold and that a
connection is available. The icons indicate that
EGPRS is available in the network, but your device is
not necessarily using EGPRS in the data transfer.
You can activate or deactivate support for HSDPA in
the device settings. See "Packet data
settings", p. 157.
HSDPA only affects the download speed; sending
data to the network, such as messages and e-mail,
is not affected.
Lock the keypad
To lock the keys, press the left selection key, then
*.
To unlock the keys, press the left selection key, then
*.
23
Your device
You can select to lock the keypad automatically after
a time-out. See "Security settings", p. 149.
Shortcuts
When in the menus, instead of using the scroll key,
you can use the number keys, #, and * to quickly
access the applications. For example, in the main
menu, press 2 to open Messaging, or # to open the
application or folder in the corresponding location
in the menu.
To switch between open applications, press and
hold
. Leaving applications running in the
background increases the demand on battery
power and reduces the battery life.
To open Gallery, press
once.
To open the multimedia menu to view the
multimedia content you have used most frequently
in your device, press the multimedia key.
To start a web connection (network service), in the
standby mode, press and hold 0.
In many applications, to view the most used option
items, press the scroll key.
To change the profile, press the power key, and
select a profile.
24
To switch between the General and Silent profiles,
in the standby mode, press and hold #. If you have
two phone lines (network service), this action
switches between the two lines.
To call your voice mailbox (network service), in the
standby mode, press and hold 1.
To open the last dialled numbers list, in the standby
mode, press the call key.
To use voice commands, in the standby mode, press
and hold the right selection key.
Multimedia menu
With the multimedia menu, you can view your most
frequently used multimedia content. The selected
content is shown in the appropriate application.
1. To open or close the multimedia menu, press the
multimedia key.
2. To browse the tiles, scroll left or right.
● Music — Enter Music
player and the Now
playing view,
browse your songs
and play lists, or
download and
manage podcasts.
● Gallery — View
your last taken
picture, start a slide
show of your images, or view media files in
albums.
● Maps — View your favourite locations in the
Maps application.
● Internet — View your favourite web links in
the browser.
● Contacts — Add your own contacts, send
messages, or make voice calls. To add a new
contact to an empty position on the list, press
the scroll key, and select a contact. To send a
message, in the multimedia menu, select a
contact, and Send text message or Send
multimedia msg..
3. To scroll up or down in a tile, press the scroll key
up or down. To select items, press the scroll key.
To change the order of the tiles, select Options >
Arrange tiles.
To return to the multimedia menu from an open
application, press the multimedia key.
Mobile Search
Press
, and select Search.
Use Mobile Search to get access to search engines
and find and connect to local services, websites,
images, and mobile content. You can also search
content in your device, such as calendar entries, email, and other messages.
Your device
The tiles are the
following:
Web search (network service)
1. In the main view, select Search the Internet.
2. Select a search engine.
3. Enter your text to search.
My content search
To search content in your device, in the main view,
enter your text into the search field. The search
results are displayed on the screen as you write.
N-Gage
About N-Gage
N-Gage is a mobile gaming platform available for a
range of compatible Nokia mobile devices. You can
access N-Gage games, players, and content through
25
Your device
the N-Gage application on your device. You can also
download games and access some features on your
computer at www.n-gage.com.
With N-Gage, you can download and buy games,
and play them by yourself or with friends. You can
download game trials to try out new games, and
buy the ones you like. N-Gage also provides a way
to keep in touch with other players, and to track and
share your scores and other gaming achievements.
To use N-Gage, you need a GPRS or 3G connection.
You can also use WLAN if available. You also need
the connection to access online features such as
downloading games, game licenses, multiplayer
gaming, or chat. You also need the connection to
participate in online or multiplayer games, or to
send messages to other players.
All N-Gage services, where connection to N-Gage
servers is required, such as game file downloading,
game purchase, online games, multiplayer gaming,
creating a player name, chat, and messaging,
involve transmission of large amounts of data.
Your service provider will charge for data transfer.
For more information about data transfer plans,
contact your mobile service provider.
N-Gage views
26
The N-Gage application consists of five different
modules. Menu tabs represent each module.
Home is the default view when you start the NGage application. You can start playing or resume
the game you played last, check your current N-Gage
points, find more games, read your messages, or
connect with an N-Gage Friend who is available to
play.
In My Games, you can play and manage games
you have downloaded to your device. You can install
and delete games, rate and review games you have
played, and recommend them to your N-Gage
Friends.
In My Profile, you can manage your profile
information and details, and keep a record of your
N-Gage gaming history.
In My Friends, you can invite other N-Gage
players to your friends list, and see if they are online
and available to play. You can also connect with
your N-Gage Friends by using private messaging.
In Showroom, you can find information about
N-Gage games, including screenshots and Player
Reviews. You can also try out new games by
downloading game trials, or enhance your gaming
experience with Game Extras for games already on
your device.
Create a player name
You can download, purchase, and play games
without a Player Name, but creating one is
recommended for the full N-Gage experience. A
Player Name enables you to participate in the NGage community, connect with other players, and
share your gaming achievements,
recommendations, and reviews.
You also need a Player Name to transfer your profile
details and N-Gage Points to another device.
When you start the N-Gage application and connect
to the N-Gage service for the first time, you are
prompted to create an N-Gage Player Name. You can
connect to the network, for example, by setting
your availability by selecting Options > Set
Availability > Available to Play.
If you already have an N-Gage Player Name, select I
have an account, and enter your user name and
password to log in.
To create a new Player Name:
1. Select Register New User.
2. In the registration screen, enter your date of
birth, desired Player Name, and password. If the
Player Name is already taken, N-Gage suggests a
list of available similar names.
3. To register your Player Name, enter your details,
read and accept the Terms and Conditions, and
select Register.
You can also create your Player Name on the N-Gage
web site at www.n-gage.com.
When you have created a Player Name, you can edit
your settings and personal information by going to
the Private tab of the My Profile module.
Your device
Get started
Data transfer charges may apply for Player Name
creation on your device. For more information
about data transfer plans, contact your mobile
service provider.
Start a game
If one or more games are installed on your device,
the Start Game option appears in the Home module.
To start playing the game you last played, go to the
Home module, and select Start Game or Options >
Start Game.
To resume a paused game, select Options >
Resume Game.
Track your progress
To view your current N-Gage Points, go to the Home
module, and select Track My Progress or
Options > View My Points. You can also view your
profile by selecting Options > View My Profile.
27
Your device
Play with friends
If you have one or more N-Gage Friends on your
Friends List, the Play With Friends option appears in
the Home module. To connect with N-Gage Players
and to invite them to a game, select Play With
Friends. N-Gage suggests a Friend to play with
based on your previous gaming history and the
availability of your N-Gage Friends.
To find a different Friend to play with, select
Options > View My Friends to go to the My Friends
module.
This item is not displayed if there are no Friends on
your Friends List. See "Connect with other
players", p. 29.
Play and manage games
To play and manage your games, go to My Games
where you can view a list of the games downloaded
and installed on your device. The games are sorted
by the last-played date with the most recent first.
There are five possible types of games in My Games:
28
● Full Games — These are games you have
purchased with a full licence. There may be
several licence types available, depending on the
game and your region.
● Trial Games — These are full game files to which
you have access only for a limited time or which
have limited content. When the trial expires, you
must purchase a licence to unlock the full game
and continue. These games are marked with a
pink TRIAL banner in the games list.
● Demo Games — These are smaller sections of the
game with only a very limited set of features and
levels. These games are marked with a purple
DEMO banner in the games list.
● Full Expired — These are games that you have
purchased with a limited licence, which is now
expired. These games are marked with a clock
and an arrow in the games list.
● Not available — These are full games which you
have removed, or which you have downloaded
but the installation was not completed. These
games are shown as unavailable in the games
list. Also, games installed on the memory card are
shown as unavailable when the memory card has
been removed.
If a Game Extra has been downloaded but not fully
installed, the respective game graphic is also
unavailable and the game cannot be played until
the Game Extra has been installed.
Edit profile details
To edit public profile details, select Options > Edit
Profile, scroll to the Public tab and select one of the
following options:
● User icon — Add an image to represent you.
When you change the icon, N-Gage shows a list
●
●
●
After you update your profile, log in to the service
with your Player Name to ensure that the changes
you made to your profile are synchronised with the
N-Gage server.
Connect with other players
To connect with other N-Gage players and to
manage your Friends list, go to My friends. You can
search for a particular N-Gage player, invite them to
your Friends list, and then see which of your friends
are online and available to play. You can also send
and receive private messages and game
recommendations.
Find and add friends
To add an N-Gage Player to your Friends List, enter
their Player Name to the Add a Friend field when
viewing your Friends List. You can add a
personalised message to the invitation. To send the
invitation, select Send.
The recipient can then accept or decline your
invitation. If they accept, the player appears on your
Friends List.
Your device
●
of all the images in your device Gallery that can
be used as the icon. Select the image you want
from the list, or use the search to find it.
Motto — Add a short personal message. To edit
the text, select Change.
Favorite Game(s) — The names of your favourite
games. To edit the text, select Change.
Device Model — The model number of your
device. This is defined automatically and cannot
be edited.
Show Location — Select the box to display your
city and country in your public profile. By default,
the location is not displayed. You can change
your location in the Private tab.
If you do not have any N-Gage Friends and want to
meet other players, go to N-Gage Arena at www.ngage.com to visit the Chatrooms and Forums.
View friend information
To view information about a Friend, such as current
N-Gage Points totals or their most recently played
games, scroll to the player on your Friends List. You
must be online and connected to the N-Gage service
to see the current online status of your friends.
The indicator next to the Player Name shows the
player’s availability.
You can still send private messages to your N-Gage
Friends even if you are unavailable or offline.
Sort friends list
To sort your Friends by availability, Player Name, or
N-Gage Points total, select Options > Sort Friends
By.
29
Your device
Rate a player
To rate a player, scroll to the player on your Friends
List, and select Options > Rate Player. You can
give a player a rating from one to five stars. The
rating you give affects the player’s reputation in the
community, or Rep as displayed in their profile.
Send messages
In My Friends, you can exchange private messages
with players in your Friends List. If your Friend is
currently logged in to the N-Gage service, the Friend
can respond to your message and you can chat oneon-one, similar to instant messaging.
To view new messages received from an N-Gage
Friend, scroll to the friend on your Friends list, and
select Options > View Message. Read messages
are deleted automatically when you exit N-Gage.
To view Game recommendations, select Options >
View Recommendation. Game recommendations
are deleted automatically a week after you receive
them.
To send a message to a N-Gage Friend, scroll to the
Friend on your Friends List, and select Options >
Send message. The maximum size of a Private
Message is 115 characters. To send the message,
select Submit.
30
You need a GPRS, 3G, or wireless LAN connection to
be able to use the messaging feature. Data transfer
charges may apply. For more information, contact
your mobile service provider.
N-Gage settings
To change your N-Gage settings, select Options >
Edit Profile and scroll to the Private tab. To edit
the settings throughout the N-Gage application,
select Options > N-Gage Settings.
Select from the following:
● Player Name — You can edit the Player Name
only until you log in to the network for the first
time. After that, you cannot edit it.
● Personal Settings — You can define personal
details, which are not shown in your public
profile, and subscribe to the N-Gage newsletter.
You can also define whether you want to receive
notifications from your N-Gage Friends while you
are playing games.
● Connection Settings — You can allow N-Gage
to connect to the network automatically when
needed, and define your preferred access point
and the data transfer limit that triggers an alert.
● Account Details — Your purchase preferences.
When you purchase a game, you are asked if you
want to save your billing details, including your
credit card number, for faster purchasing in the
future.
You can connect a compatible headset or
compatible headphones to your device. You may
need to select the cable mode.
Warning: When you use
the headset, your ability to hear
outside sounds may be affected.
Do not use the headset where it
can endanger your safety.
Some headsets come in two parts,
a remote control unit and
headphones. A remote control
unit has a microphone and keys to
answer or end a phone call, adjust
the volume, and play music or
video files. To use the headphones with a remote
control unit, connect the unit to the Nokia AV
Connector (3.5 mm) in the device, then connect the
headphones to the unit.
If a headset does not include a microphone, for
handsfree phone calls, use such a headset with a
compatible remote control unit or the microphone
of the device.
When using certain headset enhancements, to
adjust the volume during a call, use the volume key
in the device. Some headset enhancements have
multimedia volume controls that are used to adjust
the volume only for music or video playback.
You can also connect a compatible TV-out cable to
the Nokia AV Connector (3.5 mm) of your device.
Do not connect products that create an output
signal as this may cause damage to the device. Do
not connect any voltage source to the Nokia AV
Connector.
Your device
Headset
When connecting any external device or any
headset, other than those approved by Nokia for
use with this device, to the Nokia AV Connector, pay
special attention to volume levels.
Volume and loudspeaker
control
To increase or decrease the volume level when you
have an active call or are listening to a sound, use
the volume key.
The built-in loudspeaker
allows you to speak and
listen from a short
distance without having to hold the device to your
ear.
Warning: Do not hold the device near your
ear when the loudspeaker is in use, because the
volume may be extremely loud.
31
Your device
To use the loudspeaker during a call, select
Options > Activate loudspeaker.
To turn off the loudspeaker, select Options >
Activate handset.
Offline profile
To activate the offline profile, press the power key
briefly, and select Offline. Or, press
, and select
Tools > Profiles > Offline.
The offline profile lets you use the device without
connecting to the wireless network. When you
activate the offline profile, the connection to the
wireless network is turned off, as indicated by in
the signal strength indicator area. All wireless RF
signals to and from the device are prevented. If you
try to send messages, they are placed in the outbox
to be sent later.
When the offline profile is active, you can use your
device without a SIM card.
32
Important: In the offline profile you cannot
make or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock
code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your
e-mail or browse on the internet. Remember to
comply with any applicable safety requirements
when establishing and using a wireless LAN
connection. You can also use Bluetooth connectivity
while in the offline profile.
To leave the offline profile, press the power key
briefly, and select another profile. The device reenables wireless transmissions (providing there is
sufficient signal strength).
About the camera
Your Nokia N82 has two cameras, a high resolution
camera on the back of the device (the main camera,
up to 5 megapixels, in landscape mode) and a lower
resolution camera on the front (the secondary
camera in portrait mode). You can use both cameras
to take still pictures and record videos.
Your device supports an image capture resolution
of 2592x1944 pixels. The image resolution in this
guide may appear different.
The images and video clips are automatically saved
in Images & videos in Gallery. The cameras
produce .jpeg images. Video clips are recorded in
the MPEG-4 file format with the .mp4 file extension,
or in the 3GPP file format with the .3gp file
extension (sharing quality). See "Video
settings", p. 43.
You can send images and video clips in a multimedia
message, as an e-mail attachment, or by using other
connection methods, such as Bluetooth
connectivity or wireless LAN connection. You can
also upload them to a compatible online album. See
"Share images and videos online", p. 52.
Image capture
Camera
Camera
To activate the main camera, open the lens cover by
using the camera activation switch.
To activate the main camera when the lens cover is
already open, press and hold the capture key.
To close the main camera, close the lens cover.
Still image camera indicators
The still image camera viewfinder displays the
following:
1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed
during image capture. See "Active
toolbar", p. 34.
33
Camera
3 — Battery charge level indicator
4 — Image resolution indicator, which indicates the
quality of the image. The quality of a digitally
zoomed picture is lower than that of an unzoomed
picture.
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use. The
counter is not displayed during image capture.
6 — The device memory ( ) and memory card ( )
indicators, which show where images are saved.
7 — Xenon flash indicator, which is shown blinking
only when the xenon flash is charging.
8 — GPS indicator, which is only shown when
Record location is activated in the camera settings.
See "Location information", p. 36.
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after taking
a picture or recording a video. Scroll to items, and
select them by pressing the scroll key. You can also
define when the active toolbar is visible on the
display.
34
The settings in the active toolbar return to the
default settings after you close the camera.
To view the active toolbar before and after taking a
picture or recording a video, select Options >
Show icons. To view the active toolbar only when
you need it, select Options > Hide icons. Only the
capture mode and battery level indicators are
shown on the display. To activate the active toolbar,
press the scroll key. The toolbar is visible for 5
seconds.
Before taking a picture or recording a video, in the
active toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See "You
in the picture—self-timer", p. 38.
to activate the sequence mode (images only).
See "Take pictures in a sequence", p. 37.
to select a colour effect
to show or hide the viewfinder grid (images
only)
to adjust white balance
to adjust the exposure compensation (images
only)
to adjust sharpness (images only)
to adjust contrast (images only)
to adjust light sensitivity (images only)
The available options vary depending on the
capture mode and view you are in. See "After taking
a picture", p. 36. See "After recording a
video", p. 41. The active toolbar in Gallery has
different options. See "Active toolbar", p. 47.
Take pictures
Before taking a picture, note the following:
● You cannot take pictures until the xenon flash is
fully charged, unless you have set the flash to
Off. When the flash is charging,
blinks on the
display. Charging the xenon flash usually takes a
couple of seconds.
● To make lighting and colour adjustments, use the
scroll key to scroll through the active toolbar. See
"Setup settings—adjust colour and
lighting", p. 42. Saving the captured image may
take longer if you change the zoom, lighting, or
colour settings.
● To free memory for new pictures, transfer files to
a compatible PC using a compatible USB data
cable, for example, and delete the files from your
device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
When taking a picture, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed picture is lower
than that of a nonzoomed picture.
● The camera goes into the battery saving mode if
there are no keypresses for a moment. To
continue taking pictures, press the capture key.
Camera
The icons change to reflect the current status of the
setting.
To take a picture, do the following:
1. If the camera is in the video mode, select the
image mode from the active toolbar.
2. To lock the focus on an
object, press the
capture key halfway
down (main camera
only, not available in
landscape and sports
scenes). The green
locked focus indicator
appears on the display. If the focus was not
locked, the red focus indicator appears. Release
the capture key, and press it halfway down
again. You can, however, take the picture
without locking the focus.
3. To take a picture, press the capture key. Do not
move the device before the image is saved.
To zoom in or out when taking a picture, use the
zoom key in your device.
35
Camera
Tip: To open Gallery and view the pictures you
have taken, press
on the side of your
device twice.
To activate the front camera, select Options > Use
secondary camera. To take a picture, press the
scroll key. To zoom in or out, scroll up or down.
To leave the camera open in the background and
use other applications, press
. To return to the
camera, press and hold the capture key.
After taking a picture
Select the following from the active toolbar
(available only if you select Show captured
image > On in the still image camera settings):
● If you do not want to keep the image, select
Delete ( ).
● To send the image using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or
select Send ( ). See "Write and send
messages", p. 109. This option is not available
during an active call.
You can also send the image to a call recipient
during an active call. Select Send to caller ( )
(only available during an active call).
36
● To tag images to the print basket for later
printing, select Add to Print basket ( ).
● To send the image to a compatible online album,
select
(available only if you have set up an
account for a compatible online album). See
"Share images and videos online", p. 52.
to
To zoom in an image after taking it, press
open the image in Gallery, and select the zooming
option from the options list.
To use the image as wallpaper in the active standby,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select
Options > Set as contact call img. > Assign to
contact.
To return to the viewfinder to capture a new image,
press the capture key.
Location information
Add location information automatically to pictures
when taking them. You can use this information, for
example, in Gallery to view the location where a
picture was taken.
To set the camera to add location information to
pictures, select Options > Settings > Record
location > Yes.
The following location information indicators are
shown at the bottom of the display:
●
— Location information is unavailable. If the
GPS finds a satellite connection within several
See "Still image camera settings", p. 42.
In Gallery, pictures with location information are
indicated by .
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
The camera of your device has a xenon flash for low
light conditions. The xenon flash is not available in
the sports scene mode or when Burst is selected in
the sequence mode.
You cannot take pictures if the xenon flash is not
fully charged, unless you have set the flash to Off.
When the flash is charging, blinks on the display.
Charging the xenon flash usually takes a couple of
seconds.
The following flash modes are available for the still
image camera: Automatic ( ), Red-eye ( ), On
( ), and Off ( ).
To change the flash mode, in the active toolbar,
select the desired flash mode.
Scenes
Camera
minutes, the indicator changes to . The device
adds the current positioning information to all
pictures that you took during that time
●
— Location information is available and
added to all pictures you take.
Scenes are only available in the main camera.
A scene helps you to find the right colour and
lighting settings for the current environment. The
settings of each scene have been set according to a
certain style or environment.
The default scene in the image mode is Auto, and
in the video mode Automatic (both indicated with
).
To change the scene, in the active toolbar, select
Scene modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select
Options > Change. In the user defined scene you
can adjust different lighting and colour settings. To
copy the settings of another scene, select Based on
scene mode and the desired scene. To save the
changes and return to the scenes list, press Back.
To activate your own scene, scroll to User
defined, press the scroll key, and select Select.
Take pictures in a sequence
The sequence mode is available only in the main
camera.
37
Camera
The xenon flash is only available in the sequence
mode if you define a time interval for taking
pictures.
To set the camera to take six pictures or the desired
number of pictures in sequence (if enough memory
is available), in the active toolbar, select Sequence
mode.
To take six pictures, select Burst. To capture the
pictures, press the capture key.
To take two or more pictures in a sequence, select
the desired time interval. To capture pictures using
the selected time interval, press the capture key. To
stop taking pictures, select Cancel. The number of
pictures taken depends on the available memory.
After you take the pictures in the burst mode, they
are shown in a grid on the display. To view a picture,
press the scroll key to open it. If you used a time
interval, only the last taken picture is shown on the
display. You can view the other pictures in Images
& videos in Gallery.
You can also use the sequence mode with the selftimer.
To return to the sequence mode viewfinder, press
the capture key.
38
To switch off the sequence mode, in the active
toolbar, select Sequence mode > Single shot.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you
can include yourself in the picture.
To set the self-timer delay, in the active toolbar,
select Self timer > 2 seconds, 10 seconds, or 20
seconds.
To activate the self-timer, select Activate. The
device beeps when the timer is running and the
quadrangle blinks just before the image capture.
The camera takes the picture after the selected
delay elapses.
To switch off the self-timer, in the active toolbar,
select Self timer > Off.
Tip: In the active toolbar, select Self timer >
2 seconds to keep your hand steady when
taking a picture.
Tips on taking good photographs
Picture quality
Use the appropriate picture quality. The camera has
several picture quality modes. Use the highest
setting to make sure that the camera produces the
best picture quality available. Note however, that
better picture quality requires more storage space.
For multimedia message (MMS) and e-mail
attachments it may be necessary to use the smallest
● Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too
much contrast.
Use a simple background. For portraits and other
pictures with people, avoid having your subject in
front of a cluttered, complex background that may
distract attention from the subject. Move the
camera, or the subject, when these conditions
cannot be met. Move the camera closer to the object
to take clearer portraits.
● Optimal lighting is found in situations where
there is plenty of diffused, soft light available, for
example, on a bright, partially cloudy day or on
a sunny day in the shadow of trees.
Background
Depth
When shooting landscapes and sceneries, add
depth to your pictures by placing objects in the
foreground. If the foreground object is too close to
the camera, it may be blurred.
Lighting conditions
Changing the source, amount, and direction of light
can change photographs dramatically. Here are
some typical lighting conditions:
● Light source behind the subject. Avoid placing
your subject in front of a strong light source. If
the light source is behind the subject or visible in
the display, the resulting picture may have weak
contrast, may be too dark, and may contain
unwanted light effects.
● Light source in front of the subject. Harsh
sunlight may cause the subjects to squint their
eyes. The contrast may also be too high.
Camera
picture quality mode optimised for MMS sending.
You can define the quality in the camera settings.
See "Still image camera settings", p. 42.
Video recording
To activate the main camera, open the lens cover by
using the camera activation switch.
To activate the main camera when the lens cover is
already open, press and hold the capture key.
To close the main camera, close the lens cover.
Video capture indicators
The video viewfinder displays the following:
39
Camera
To display all viewfinder indicators, select
Options > Show icons. Select Hide icons to
display only the video status indicators, and during
the recording, the available record time, zoom bar
when zooming, and the selection keys.
Record videos
Before recording a video, note the following:
1 — Capture mode indicator
2 — Audio mute on indicator
3 — Active toolbar. The toolbar is not displayed
during recording. See "Active toolbar", p. 34.
4 — The battery charge level indicator
5 — Video quality indicator that indicates whether
the quality of the video is TV high quality, TV
normal quality, E-mail high quality, E-mail
norm. quality, or Sharing quality
6 — The video clip file type
7 — Total available video recording time. When you
are recording, the current video length indicator
also shows the elapsed time and time remaining.
8 — The device memory ( ) and memory card ( )
indicators that show where videos are saved
40
9 — The video stabilisation is turned on (
"Video settings", p. 43.
). See
● To make lighting and colour adjustments, scroll
through the active toolbar. See "Setup settings—
adjust colour and lighting", p. 42. See
"Scenes", p. 37.
● To free memory for new video clips, transfer files
to a compatible PC using a compatible USB data
cable, for example, and remove the files from
your device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
To record a video, do the following:
1. If the camera is in the image mode, select the
video mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon ( ) is shown and a tone sounds,
indicating that recording has started.
3. To pause recording at any time, press Pause.
Video recording automatically stops if recording
is set to pause and there are no keypresses
To zoom in or out of the subject, use the zoom
key in your device.
4. To stop recording, select Stop. The video clip is
automatically saved to the Images & videos
folder of Gallery. The maximum length of the
video clip depends on the available memory.
To activate the front camera, select Options > Use
secondary camera. To start recording a video,
press the scroll key. To zoom in or out, scroll up or
down.
After recording a video
After you record a video clip, select the following
from the active toolbar (available only if Show
captured video is set to On in the video settings):
● To immediately play the video clip you just
recorded, select Play ( ).
● If you do not want to keep the video, select
Delete ( ).
● To send the video clip using a multimedia
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
or select Send ( ). See "Write and send
messages", p. 109. See "Send data using
Bluetooth connectivity", p. 80. This option is
not available during an active call. You may not
be able to send video clips saved in the .mp4 file
format in a multimedia message.
You can also send the video clip to a call recipient
during an active call. Select Send to caller ( )
(only available during an active call).
Camera
within a minute. Select Continue to resume
recording.
● To upload the video clip to a compatible online
album, select (only available if you have set up
an account for a compatible online album). See
"Share images and videos online", p. 52.
● To return to the viewfinder to record a new video
clip, press the capture key.
Camera settings
There are two kinds of settings for the camera:
setup settings and main settings. The setup settings
return to the default settings after you close the
camera, but the main settings remain the same
until you change them again. To adjust the setup
settings, use the options in the active toolbar. See
"Setup settings—adjust colour and
lighting", p. 42. To change the main settings, in
the image or video mode, select Options >
Settings.
41
Camera
42
Still image camera settings
To change the main settings, in the image mode,
select Options > Settings and from the following:
● Image quality — Select Print 5M - Large
(2592x1944 resolution), Print 3M - Medium
(2048x1536 resolution), Print 2M - Medium
(1600x1200 resolution), E-mail 0.8M - Med.
(1024x768 resolution), or MMS 0.3M - Small
(640x480 resolution). The better the image
quality, the more memory the image consumes.
If you want to print the image, select Print 5M Large, Print 3M - Medium, or Print 2M Medium. If you want to send it using e-mail,
select E-mail 0.8M - Med.. To send the image
using a multimedia message, select MMS 0.3M Small.
These resolutions are only available in the main
camera.
● Add to album — Select whether you want to
save the image to a certain album in Gallery. If
you select Yes, a list of available albums opens.
● Record location — To add GPS location
coordinates to each image file, select Yes.
Receiving a GPS signal may take time or the signal
may not be available.
● Show captured image — Select On if you want
to see the captured image after it is taken or
●
●
●
●
●
●
Off if you want to continue taking pictures
immediately.
Default image name — Define the default
name for the captured images.
Extended digital zoom (main camera only)
— On (continuous) allows the zoom increments
to be smooth and continuous between digital
and extended digital zoom, On (paused) allows
the zoom increments to pause at the digital and
extended digital step point, and Off allows a
limited amount of zoom while retaining the
image resolution.
Capture tone — Select the tone you want to
hear when you take a picture.
Memory in use — Select where you want to
store your images.
Rotate image — Select whether you want
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
Restore camera settings — Select Yes to return
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings are also shooting mode specific; if
you change the settings in the image mode, the
settings in the video mode do not change.
Switching between the modes does not reset the
defined setup settings.
Camera
● Flash mode ( ) (images only) — Select the
desired flash mode.
● Colour tone ( ) — Select a colour effect from
the list.
● White balance ( ) — Select the current
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
● Exposure compensation ( ) (images only) — If
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
● Sharpness ( ) (images only) — Adjust the
sharpness of the image.
● Contrast ( ) (images only) — Adjust the
difference between the lightest and darkest
parts of the image.
● Light sensitivity ( ) (images only) — Increase
the light sensitivity in low light conditions to
decrease the risk of images that are too dark.
The setup settings return to the default settings
when you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode,
select Options > Settings and from the following:
● Video quality — Set the quality of the video clip
to TV high quality, TV normal quality, E-mail
high quality, E-mail norm. quality (standard
quality for playback through your handset), or
Sharing quality. If you want to view the video
on a compatible TV or PC, select TV high
quality or TV normal quality, which have VGA
resolution (640x480) and the .mp4 file format.
You may not be able to send video clips saved in
the .mp4 file format in a multimedia message. To
send the video clip using a multimedia message,
select Sharing quality, which has QCIF
resolution and the .3gp file format.
43
Camera
44
● Video stabilisation — Select On to reduce
camera shaking when recording the video.
● Audio recording — Select Mute if you do not
want to record sound.
● Add to album — Select whether you want to
add the recorded video clip to a certain album in
Gallery. Select Yes to open a list of available
albums.
● Show captured video — Select whether you
want the first frame of the recorded video clip to
be displayed after the recording stops. Select
Play from the active toolbar (main camera) or
Options > Play (secondary camera) to view the
video clip.
● Default video name — Define the default name
for the captured video clips.
● Memory in use — Select where you want to
store your videos.
● Restore camera settings — Select Yes to return
the default values to the camera settings.
Gallery
Gallery
To store and organise your images, video clips,
sound clips, and streaming links, or share your files
with other compatible Universal Plug and Play
(UPnP) devices through wireless LAN (WLAN), press
, and select Gallery.
Tip: If you are in another application, to view
the last saved picture or video clip in Gallery,
press
on the side of your device. To
enter the Images & videos folder main view,
press the review key again.
View and organise files
Press
, and select Gallery.
In Gallery, select Images & videos , Tracks ,
,
Sound clips , Streaming links
Presentations , or All files , and press the scroll
key to open it.
You can browse and open
folders; and mark, copy,
and move items to folders.
You can also create albums
and mark, copy, and add
items to albums. See
"Albums", p. 47.
Files stored on your
compatible memory card
(if inserted) are indicated
with
.
To open a file, press the
scroll key. Video clips, .ram files, and streaming links
open and play in RealPlayer, and music and sound
clips in Music player. See "RealPlayer ", p. 97. See
"Music player", p. 86.
To copy or move files to the memory card (if
inserted) or to device memory, select a file and
Options > Move and copy > Copy to memory
card or Move to memory card, or Copy to phone
mem. or Move to phone mem..
45
Gallery
Images and video clips
View images and videos
To view your images and video clips, press
select Gallery > Images & videos.
key on the side of your device. The zooming ratio is
not stored permanently.
, and
Pictures taken and video clips recorded with the
camera of your device are stored in Images &
videos. Images and video clips can also be sent to
you in a multimedia message, as an e-mail
attachment, or through Bluetooth connectivity. To
be able to view a received image or video clip in
Gallery or in the RealPlayer, you must first save it.
The video clips saved in Nokia Video Centre are not
shown in Images & videos in Gallery. See "Nokia
Video Centre", p. 83.
46
The images and
video clip files in
Images & videos
are in a loop and
ordered by date
and time. The
number of files is
displayed. To
browse the files
one by one, scroll left or right. To browse files in
groups, scroll up or down.
To open a file, press the scroll key. When an image
is opened, to zoom in the image, press the zoom
If you want the display to be automatically rotated
based on the orientation of the device, set the
display rotation on in the settings. See
"Personalisation settings", p. 147.
To edit a video clip or a photo, select Options >
Edit. See "Edit images", p. 48.
was
To see where an image marked with
captured, select Options > Show on map.
To print your images on a compatible printer, or to
store them on a compatible memory card (if
inserted) for printing, select Options > Print. See
"Image print", p. 51. You can also tag images for
later printing to the print basket in Gallery. See
"Print basket", p. 48.
Organise images and videos
To add an image or a video clip to an album in
Gallery, select Options > Albums > Add to
album. See "Albums", p. 47.
To tag an image for later printing, select the image
and Add to Print basket from the active toolbar.
See "Print basket", p. 48.
To use the picture as a background image, select the
picture and Options > Use image > Set as
wallpaper.
Some of the options may also be available through
the active toolbar (available when you open an
image or a video clip). See "Active
toolbar", p. 47.
Active toolbar
In the Images & videos folder, you can use the
active toolbar as a shortcut to different tasks. The
active toolbar is available only when you have
selected an image or a video clip.
In the active toolbar, scroll up or down to different
items, and select them by pressing the scroll key.
The available options vary depending on the view
you are in and whether you have selected an image
or a video clip.
The settings in the active toolbar return to the
default settings after you close the camera.
If you want the active toolbar to always be visible
on the display, select Options > Show icons.
To view the active toolbar only when you need it,
select Options > Hide icons. To activate the active
toolbar, press the scroll key.
Select from the following:
to play the selected video clip
to send the selected image or video clip
to upload the selected image or video clip to a
compatible online album (only available if you have
set up an account for a compatible online album).
See "Share images and videos online", p. 52.
Gallery
To delete an image or video clip, select Options >
Delete.
or
to add or remove an image from the print
basket. See "Print basket", p. 48.
to print the viewed image
to start a slide show of your images
to delete the selected image or video clip
The available options may vary depending on the
view you are in.
Albums
With albums, you can conveniently manage your
images and video clips. To view the albums list in
Gallery, select Images & videos > Options >
Albums > View albums.
To create a new album, in the albums list view,
select Options > New album.
To add a picture or a video clip to an album in
Gallery, scroll to a picture or video clip, and select
Options > Albums > Add to album. A list of
albums opens. Select the album to which you want
to add the picture or video clip. The item you added
to the album is still visible in Images & videos in
Gallery.
47
Gallery
To remove a file from an album, open the album,
scroll to the file, and press C. The file is not deleted
from Images & videos in Gallery.
images, and Options > Slide show > Start to
start the slide show.
Print basket
● Pause — to pause the slide show
● Continue — to resume the slide show, if paused
● End — to close the slide show
You can tag images to the print basket, and print
them later with a compatible printer or in a
compatible printing kiosk, if available. See "Image
print", p. 51. The tagged images are indicated
with
in Images & videos and albums.
To tag an image for later printing, select an image,
and Add to Print basket from the active toolbar.
To view the images in the print basket, select
from Images & videos (available only when you
have added pictures to the print basket), or
Options > Print > View Print basket.
To remove an image from the print basket, select
an image in Images & videos or in an album, and
Options > Remove from basket.
Slide show
To view your images as a slide show, select an
image in Gallery, and Start slide show ( ) in the
active toolbar. The slide show starts from the
selected file.
48
To view only the selected images as a slide show,
select Options > Mark/Unmark > Mark to mark
Select from the following:
To browse the images, scroll left or right.
Before starting the slide show, adjust the slide show
settings. Select Options > Slide show >
Settings, and from the following:
● Music — to add sound to the slide show. Select
On or Off.
● Song — to select a music file from the list
● Delay between slides — to adjust the tempo
of the slide show
● Zoom and pan — to make the slide show move
smoothly from one slide to another, and let
Gallery randomly zoom in and out in the images
To decrease or increase the volume during the slide
show, use the volume key in your device.
Edit images
Image editor
To edit the pictures after taking them or the ones
already saved in Gallery, select Options > Edit. The
image editor opens.
Crop image
To crop an image, select Options > Apply
effect > Crop, and a predefined aspect ratio from
the list. To crop the image size manually, select
Manual.
If you select Manual, a cross appears in the upper
left corner of the image. Use the scroll key to select
the area to crop, and select Set. Another cross
appears in the lower right corner. Again select the
area to be cropped. To adjust the first selected area,
select Back. The selected areas form a rectangle
that forms the cropped image.
If you select a predefined aspect ratio, select the
upper left corner of the area to be cropped. To resize
the highlighted area, use the scroll key. To freeze
the selected area, press the scroll key. To move the
area within the picture, use the scroll key. To select
the area to be cropped, press the scroll key.
Reduce red-eye
To reduce red-eye in an image, select Options >
Apply effect > Red eye reduction.
Gallery
Select Options > Apply effect to open a grid
where you can select different edit options
indicated by small icons. You can crop and rotate
the image; adjust the brightness, colour, contrast,
and resolution; and add effects, text, clip art, or a
frame to the picture.
Move the cross onto the eye, and press the scroll key.
A loop appears on the display. To resize the loop to
fit the size of the eye, use the scroll key. To reduce
the redness, press the scroll key. When you finish
editing the image, press Done.
To save the changes, and return to Images &
videos, press Back.
Useful shortcuts
You can use the following shortcuts when editing
images:
● To view a full-screen image, press *. To return to
the normal view, press * again.
● To rotate an image clockwise or
counterclockwise, press 3 or 1.
● To zoom in or out, press 5 or 0.
● To move on a zoomed image, scroll up, down,
left, or right.
Edit videos
To edit video clips in Gallery, scroll to a video clip,
and select Options > Edit and an editing option.
49
Gallery
The video editor supports .3gp and .mp4 video file
formats, and .aac, .amr, .mp3, and .wav audio file
formats. It does not necessarily support all features
of a file format or all the variations of file formats.
TV-out mode
To view the captured images and video clips on a
compatible TV, use a Nokia Video Connectivity Cable.
Before viewing the images and video clips on TV,
you may need to configure the TV-out settings for
the applicable TV system and TV aspect ratio. See
"Enhancement settings", p. 148.
To watch images and video clips on TV, do the
following:
1. Connect a Nokia Video Connectivity Cable to the
video input of a compatible TV.
2. Connect the other end of the Nokia Video
Connectivity Cable to the Nokia AV Connector of
your device.
3. You may need to select the cable mode.
4. Press
, and select Gallery > Images &
videos and the file you want to view.
50
The images are
shown in the
image viewer,
and the video
clips are played
in RealPlayer.
All audio,
including the
active calls, stereo video clip sound, key tone, and
ringing tone is routed to the TV when the Nokia
Video Connectivity Cable is connected to the device.
You can use the device microphone normally.
For all applications other than the Images &
videos folder in Gallery and RealPlayer, the TV
screen displays what is displayed on the screen of
your device.
The opened image is displayed in full-screen on the
TV. When you open an image in the thumbnail view
while it is viewed on the TV, zooming in is not
available.
When you open a highlighted video clip, RealPlayer
starts playing the video clip on the device display
and the TV screen. See "RealPlayer ", p. 97.
You can view images as a slide show on TV. All items
in an album or marked images are displayed on the
TV in full-screen while the selected music plays. See
"Slide show", p. 48.
With presentations, you can view SVG (scalable
vector graphics) files, such as cartoons and maps.
SVG images maintain their appearance when
printed or viewed with different screen sizes and
resolutions.
To view SVG files, press
, and select Gallery >
Presentations. Scroll to an image, and select
Options > Play. To pause playing, select
Options > Pause.
To zoom in, press 5. To zoom out, press 0.
To rotate the image 90 degrees clockwise or
counterclockwise, press 1 or 3, respectively. To
rotate the image 45 degrees, press 7 or 9.
To switch between full and normal screen, press *.
Print images
Image print
To print images with Image print, select the image
you want to print, and the print option in Gallery,
camera, image editor, or image viewer.
Use Image print to print your images using a
compatible USB data cable, or Bluetooth
connectivity. You can also print images using
wireless LAN. If a compatible memory card is
inserted, you can store the images to the memory
card, and print them using a compatible printer.
You can only print images that are in .jpeg format.
The pictures taken with the camera are
automatically saved in .jpeg format.
Gallery
Presentations
Printer selection
To print images with Image print, select the image
you want to print, and the print option in Gallery,
camera, image editor, or image viewer.
When you use Image print for the first time, a list of
available compatible printers is displayed after you
select the image. Select a printer. The printer is set
as the default printer.
To print to a printer compatible with PictBridge,
connect the compatible data cable before you select
the print option, and check that the data cable mode
is set to Image print or Ask on connection. See
"USB", p. 82. The printer is automatically displayed
when you select the print option.
If the default printer is not available, a list of
available printing devices is displayed.
To change the default printer, select Options >
Settings > Default printer.
Print preview
After you select the printer, the selected images are
displayed using predefined layouts.
51
Gallery
To change the layout, scroll left or right to browse
through the available layouts for the selected
printer. If the images do not fit on a single page,
scroll up or down to display the additional pages.
Print settings
The available options vary depending on the
capabilities of the printing device you selected.
To set a default printer, select Options > Default
printer.
To select the paper size, select Paper size, the size
of paper from the list, and OK. Select Cancel to
return to the previous view.
Print online
With Print online, you can order prints of images
online directly to your home or to a store where you
can pick them up. You can also order different
products with the selected image, such as mugs or
mouse pads. The available products depend on the
service provider.
To use Print online, you must have at least one
printing service configuration file installed. The files
can be obtained from printing service providers that
support Print online.
52
For more information on the application, see the
guides available at the Nokia product support pages
or your local Nokia website.
Share images and videos
online
You can share images and video clips in compatible
online albums, weblogs, or in other compatible
online sharing services on the web. You can upload
content, save unfinished posts as drafts and
continue later, and view the content of the albums.
The supported content types may vary depending
on the service provider.
Before sharing images and videos online, you must
subscribe to the service with an online image
sharing service provider, and create a new account.
You can usually subscribe to the service on the web
page of the service provider. Contact your service
provider for details on subscribing to the service.
To upload a file from Gallery to the online service,
press
, and select Gallery > Images & videos.
Scroll to the desired file, and select Options >
Send > Post to web, or select the file and from
the active toolbar.
For more information on the application and
compatible service providers, see the Nokia product
support pages or your local Nokia website.
About home network
Your device is compatible with Universal Plug and
Play architecture (UPnP). Using a wireless LAN
(WLAN) access point device or a WLAN router, you
can create a home network and connect compatible
UPnP devices that support WLAN to the network,
such as your device, a compatible PC, a compatible
printer, and a compatible sound system or TV, or a
sound system or TV equipped with a compatible
wireless multimedia receiver.
To use the WLAN function of your device in a home
network, you must have a working WLAN home
connection setup and have other UPnP enabled
home devices to connect to the same home
network. See "Wireless LAN", p. 76.
The home network uses the security settings of the
WLAN connection. Use the home network feature in
a WLAN infrastructure network with a WLAN access
point device and encryption enabled.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network.
To manage your home network settings, press
, and select Tools > Connectivity > Home
media. You can also use the home network to view,
play, copy, or print compatible media files from
Gallery. See "View and share media files", p. 55.
Your device is connected to the home network only
if you accept a connection request from another
compatible device, or in Gallery, select the option to
view, play, print, or copy media files on your device
or search for other devices in the Home network
folder.
Gallery
Home network
Important security information
When you configure your WLAN home network,
enable an encryption method on your access point
device, then on the other devices you intend to
connect to your home network. Refer to the
documentation of the devices. Keep any passcodes
secret and in a safe place separate from the devices.
You can view or change the settings of the WLAN
internet access point in your device. See "Access
points", p. 155.
If you use the ad hoc operating mode to create a
home network with a compatible device, enable
one of the encryption methods in WLAN security
mode when you configure the internet access
point. See "Connection settings", p. 154. This step
reduces the risk of an unwanted party joining the
ad hoc network.
Your device notifies you if another device attempts
to connect to it and the home network. Do not
accept connection requests from an unknown
device.
53
Gallery
If you use WLAN in a network that does not have
encryption, switch off sharing your files with other
devices, or do not share any private media files. See
"Settings for home network", p. 54.
Configure settings
Settings for home network
● Home access point — Select Always ask if you
want the device to ask for the home access point
every time you connect to the home network,
Create new to define a new access point that is
used automatically when you use the home
network, or None. If your home network does
not have WLAN security settings enabled, you get
a security warning. You can continue and switch
the WLAN security on later; or cancel defining the
access point and first switch on the WLAN
security. See "Access points", p. 155.
● Device name — Enter a name for your device
that is shown to the other compatible devices in
the home network.
● Copy to — Select the memory where you want
to save copied media files.
To share media files saved in Gallery with other
compatible UPnP devices through WLAN, you must
create and configure your WLAN home internet
access point, then configure the settings for home
network in the Home media application. See
"WLAN internet access points", p. 77. See
"Connection settings", p. 154.
The options related to home network are not
available in applications before the settings in the
Home media application have been configured.
When you access the Home media application for
the first time, the setup wizard opens and helps you
define the home network settings for your device.
To use the setup wizard later, in the Home media
main view, select Options > Run wizard, and
follow the instructions on the display.
54
To connect a compatible PC to the home network,
on the PC, you must install the related software. You
get the software from the CD-ROM or DVD-ROM
supplied with your device, or you can download it
from the device support pages on the Nokia
website.
To configure the settings for home network, select
Tools > Connectivity > Home media >
Settings and from the following:
Set sharing on and define content
Select Tools > Connectivity > Home media >
Share content and from the following:
● Content sharing — Allow or deny sharing media
files with compatible devices. Do not set content
sharing on before you have configured all the
other settings. If you set content sharing on, the
View and share media files
To share your media files with other UPnP
compatible devices in the home network, set
content sharing on. See "Set sharing on and define
content", p. 54. If content sharing is off in your
device, you can still view and copy the media files
stored in another home network device if it is
allowed by the other device.
Show media files stored in your device
To show your images, videos, and sound clips in
another home network device, such as a compatible
TV, do the following:
1. In Gallery, select an image, video clip, or sound
clip, and Options > Show via home
network.
2. Select a compatible device in which the media
file is shown. The images are shown both in the
other home network device and your device, and
the video clips and sound clips are played only
in the other device.
Gallery
other UPnP compatible devices in the home
network can view and copy your files you have
selected for sharing in the Images & videos
folder. If you do not want the other devices to
access your files, set content sharing off.
● Images & video — Select media files for sharing
with other devices, or view the sharing status of
images and videos. To update the content of the
folder, select Options > Refresh content.
● Music — Select playlists for sharing with other
devices, or view the sharing content of playlists.
To update the content of the folder, select
Options > Refresh content.
3. To stop sharing, select Options > Stop
showing.
Show media files stored in the other device
To show media files that are stored on another
home network device in your device (or in a
compatible TV, for example), do the following:
1. Press
, and select Tools > Connectivity >
Home media > Browse home. Your device
starts the search of other compatible devices.
Device names start to appear on the display.
2. Select a device from the list.
3. Select the type of media you want to view from
the other device. The available file types depend
on the features of the other device.
To search files with different criteria, select
Options > Find. To sort the found files, select
Options > Sort by.
4. Select the media file or folder you want to view.
55
Gallery
5. Press the scroll key, and select Play or Show, and
On device or Via home network.
6. Select the device in which the file is shown.
To adjust the volume when playing a video or sound
clip, scroll left or right.
To stop sharing the media file, select Back or Stop
(available when playing videos and music).
Tip: You can print images saved in Gallery
through a home network with a UPnP
compatible printer. See "Image print", p. 51.
Content sharing does not have to be switched
on.
Copy media files
To copy or transfer media files from your device to
another compatible device, such as a UPnP
compatible PC, select a file in Gallery and Options >
Move and copy > Copy to home network or
Move to home net.. Content sharing does not have
to be switched on.
To copy or transfer files from the other device to
your device, select a file in the other device and the
desired copying option from the options list.
Content sharing does not have to be switched on.
56
About GPS
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites
and their ground stations that monitor the
operation of the satellites. Your device has an
internal GPS receiver.
A GPS terminal receives low-power radio signals
from the satellites and measures the travel time of
the signals. From the travel time, the GPS receiver
can calculate its location to the accuracy of meters.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by
the government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United
States government and is subject to change with
the United States Department of Defense civil GPS
policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals
may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver
should only be used outdoors to allow reception of
GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular
radio networks for positioning or navigation.
Positioning (GPS)
Positioning (GPS)
Your device also supports Assisted GPS (A-GPS).
Assisted GPS (A-GPS) is used to retrieve assistance
data over a packet data connection, which assists in
calculating the coordinates of your current location
when your device is receiving signals from
satellites.
A-GPS is a network service.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider specific A-GPS settings
are available. The assistance data is retrieved from
the Nokia A-GPS service server only when needed.
You must have a packet data internet access point
defined in the device to retrieve assistance data
from the Nokia A-GPS service. To define an access
point for A-GPS, press
, and select Tools >
Settings > General > Positioning >
Positioning server > Access point. A wireless LAN
57
Positioning (GPS)
access point cannot be used for this service. The
packet data internet access point is asked when GPS
is used for the first time in your device.
To enable or disable different positioning methods,
such as Bluetooth GPS, press
, and select Tools >
Settings > General > Positioning >
Positioning methods.
GPS receiver
The GPS receiver is located in the top of the device.
When using the receiver, from an upright position,
move the device to an angle of about 45 degrees,
with an unobstructed view of the sky.
Establishing a
GPS connection
may take from a
couple of
seconds to
several minutes.
Establishing a
GPS connection
in the car may
take longer.
58
The GPS receiver draws its power from the device
battery. Using the GPS receiver may drain the
battery faster.
About satellite signals
If your device cannot find the satellite signal,
consider the following:
● If you are indoors, go outdoors to receive a better
signal.
● If you are outdoors, move to a more open space.
● Ensure that
your hand does
not cover the
GPS antenna of
your device.
See "GPS
receiver"
, p. 58.
● If the weather
conditions are bad, the signal strength may be
affected.
● If the power saver turns on while the device is
attempting to establish a GPS connection, the
attempt is interrupted.
● Establishing a GPS connection may take from a
couple of seconds to several minutes.
Satellite status
To check how many satellites your device has found,
and whether your device is receiving satellite
signals, press
, and select Tools >
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The
longer the bar, the
stronger the satellite
signal. When your device
has received enough data
from the satellite signal to
calculate the coordinates
of your location, the bar
turns black.
Initially your device must
receive signals from at
least four satellites to be
able to calculate the
coordinates of your
location. When the initial
calculation has been made,
it may be possible to
continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Position requests
You may receive a request from a network service
to receive your position information. Service
providers may offer information about local topics,
such as weather or traffic conditions, based on the
location of your device.
When you receive a position request, a message is
displayed showing the service that is making the
request. Select Accept to allow your position
information to be sent or Reject to deny the
request.
Positioning (GPS)
Connectivity > GPS data > Position >
Options > Satellite status. Or, in the Maps
application, select Options > Map view > GPS
info.
Maps
About Maps
Press
, and select Maps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, view
traffic details, and save locations as favourites and
send them to compatible devices.
You can also purchase extra services, such as guides,
a turn-by-turn Drive & Walk navigation service with
voice guidance, and a traffic information service.
Maps uses GPS. See "Positioning (GPS)", p. 57. You
can define the positioning methods used with your
59
Positioning (GPS)
device in the device settings. See "Positioning
settings", p. 151. For the most accurate location
information, use either the internal GPS or a
compatible external GPS receiver.
When you use Maps for the first time, you may need
to define an internet access point for downloading
map information for your current location. To
change the default access point later, in Maps, select
Options > Tools > Settings > Internet >
Default access point (shown only when you are
online).
When you browse a map in Maps, the map data for
the area is automatically downloaded to your
device through the internet. A new map is
downloaded only if you scroll to an area which is
not covered by maps already downloaded. Some
maps may be pre-loaded on the memory card in
your device.
You can download more maps to your device using
Nokia Map Loader PC software. See "Download
maps", p. 62.
Tip: You can also download maps by using a
wireless LAN connection.
60
Downloading maps may involve the transmission of
large amounts of data through your service
provider's network. Contact your service provider
for information about data transmission charges.
If you want the Maps application to establish an
internet connection automatically when you start
the application, in Maps, select Options > Tools >
Settings > Internet > Go online at start-up >
Yes.
To receive a note when your device registers to a
network outside your home cellular network, select
Options > Tools > Settings > Internet >
Roaming warning > On (shown only when you
are online). Contact your network service provider
for details and roaming costs.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography provided for use in this device.
Browse maps
The map coverage varies by country.
When you open the Maps application, Maps zooms
in to the location that was saved from your last
session. If no position was saved from the last
session, the Maps application zooms in to the
capital city of the country you are in based on the
information the device receives from the cellular
network. At the same time, the map of the location
is downloaded, if it has not been downloaded
during previous sessions.
To establish a GPS connection and zoom in to your
current location, select Options > My position, or
press 0. If the power saver turns on while the device
is attempting to establish a GPS connection, the
attempt is interrupted.
A GPS indicator
is shown on the display.
One bar is one satellite. When the device tries to find
a satellite, the bar is yellow. When the device
receives enough data from the satellite to establish
a GPS connection, the bar turns green. The more
green bars, the stronger the GPS connection.
When the GPS connection is active, your current
location is indicated on the map with .
Move and zoom
To move on the map, scroll
up, down, left, or right. The
map is oriented towards
north by default. The
compass rose displays the
orientation of the map and
rotates during navigation
when the orientation
changes.
When you browse the map
on the display, a new map
is automatically downloaded if you scroll to an area
which is not covered by maps already downloaded.
These maps are free of charge, but downloading
may involve the transmission of large amounts of
data through your service provider's network. For
more information on data transmission charges,
contact your service provider.
The maps are automatically saved on a compatible
memory card (if inserted and set as the default
maps storage).
To zoom in or out, press * or #. Use the scale bar to
estimate the distance between two points on the
map.
Positioning (GPS)
Your current location
Adjust the map view
To define the metric system used in the maps, select
Options > Tools > Settings > Map > System
of measurement > Metric or Imperial.
To define what kinds of points of interest are shown
on the map, select Options > Tools > Settings >
Map > Categories and the desired categories.
To select whether you want to view maps in 2-D
mode, 3-D mode, as satellite image, or hybrid, select
Options > Map mode > Map, Map 3D,
Satellite, or Hybrid. Satellite images may not be
available for all geographic locations.
To define whether you want the map view to be a
day view or a night view, select Options > Tools >
Settings > Map > Colours > Day mode or Night
mode.
61
Positioning (GPS)
To adjust other internet, navigation, routing, and
general map settings, select Options > Tools >
Settings.
Download maps
When you browse a map on the display in Maps, a
new map is automatically downloaded if you scroll
to an area which is not covered by maps already
downloaded. You can view the amount of
transferred data from the data counter (kB) shown
on the display. The counter shows the amount of
network traffic when you browse maps, create
routes, or search for locations online. Downloading
maps data may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for
information about data transmission charges.
To prevent the device from automatically
downloading maps through the internet, for
example, when you are outside your home cellular
network, or other map related data required by the
extra services, select Options > Tools >
Settings > Internet > Go online at start-up >
No.
62
To define how much memory card space you want
to use for saving maps or voice guidance files, select
Options > Tools > Settings > Map >
Maximum memory use > Max. memory card
use. This option is available only when a compatible
memory card is inserted and set as the default maps
storage. When the memory is full, the oldest map
data is deleted. The saved maps data can be deleted
using Nokia Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps from the internet to a
compatible memory card. You can also use it to
download voice files for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to
a compatible PC. You can download the PC software
from the internet at www.nokia.com/maps. Follow
the instructions on the screen.
You must use the Maps application and browse
maps at least once before using Nokia Map Loader.
Nokia Map Loader uses the Maps history
information to check the version of map data to be
downloaded.
After you have installed the PC software to your PC,
to download maps, do the following:
1. Connect your device to the PC by using a
compatible USB data cable. Select Data
transfer as the USB connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Find a place
To search for a location or point of interest by
keyword, in the main view, enter the name of the
place or the desired keyword in the search field, and
select Search.
To import a location address from your contact
information, select Options > Select from
Contacts.
To use a location on the map, for example, as a
starting point for a nearby search, to plan a route,
view its details, or start navigation (extra service),
press the scroll key, and select the desired option.
To browse through places and attractions by
categories in your area, select Options > Search,
and a category. If you search by an address, you
must enter the city and country. You can also use an
address you have saved to a contact card in
Contacts.
To save a location as a favourite place, in the desired
location, press the scroll key, select Add to My
places, enter a name for the place, and select OK.
You can also save the location to a route or a
collection. To view your saved places, select
Options > Favourites > My places.
To send a saved place to a compatible device, in the
Places view, press the scroll key, and select Send. If
you send the place in a text message, the
information is converted to plain text.
To take a screen shot of your location, select
Options > Tools > Save map screen shot. The
screen shot is saved in Photos. To send the screen
shot, open Photos, and select the send option from
the active toolbar or the options menu, and the
method.
Positioning (GPS)
Tip: Use Nokia Map Loader to save on mobile
data transfer fees.
To view your browsing history, places you have
viewed on a map, and routes and collections you
have created, select Options > Favourites, and
the desired option.
Plan a route
To plan a route to a destination, scroll to the desired
destination, press the scroll key, and select Add to
route. The location is added to the route.
To add more locations to the route, select
Options > Add route point. The first selected
stopover is the starting point. To change the order
of the stopovers, press the scroll key, and select
Move.
Extra services for Maps
You can purchase a licence and download different
kinds of guides, such as city and travel guides, for
63
Positioning (GPS)
different cities to your device. You can also purchase
a licence for a turn-by-turn Drive & Walk navigation
service with voice guidance, and a traffic
information service to use it in Maps. A navigation
licence is region specific (region selected when
purchasing the licence), and it can be used only on
the selected area. The downloaded guides are
automatically saved to your device.
The licence you purchase for a guide or navigation
can be transferred to another device, but the same
licence can only be active in one device at a time.
Traffic and guide information and related services
are generated by third parties independent of
Nokia. The information may be inaccurate and
incomplete to some extent and is subject to
availability. Never rely solely on the
aforementioned information and related services.
Navigation
To purchase a Drive & Walk navigation service with
voice guidance or Walk navigation only, select
Options > Extras > 1 Drive & Walk or 2 Walk.
You can pay for the service through a credit card or
have the amount charged to your phone bill (if
supported by your cellular network service
provider).
Drive navigation
64
To purchase a Drive & Walk navigation service,
select Options > Extras > 1 Drive & Walk.
When you use drive navigation for the first time,
you are prompted to select the language of the
voice guidance and download the voice guidance
files of the selected language. You can also
download voice guidance files using Nokia Map
Loader. See "Download maps", p. 62.
To change the language later, in the Maps main
view, select Options > Tools > Settings >
Navigation > Voice guidance and a language,
and download the voice guidance files for the
selected language.
Walk navigation
To purchase a Walk navigation service, select
Options > Extras > 2 Walk.
Walk navigation differs from drive navigation in
many ways: The walking route ignores any possible
limitations to car navigation, such as one-way
streets and turn restrictions, and includes areas
such as pedestrian zones and parks. It also
prioritises walkways and smaller roads, and omits
highways and motorways. The length of a walking
route is limited to a maximum of 50 kilometres (31
miles) and the travelling speed to a maximum of 30
km/h (18 miles/h). If the speed limit is exceeded,
navigation stops and is resumed once the speed is
back within limits.
Turn-by-turn navigation or voice guidance are not
available for Walk navigation. Instead, a big arrow
Navigate to the desired destination
To start navigation to the desired destination with
GPS, select any location on the map or in a results
list, and Options > Drive to or Walk to.
To switch between different views during
navigation, scroll left or right.
To stop navigation, press Stop.
To select navigation options, press Options during
navigation. If driving navigation is active, a menu
view with twelve options is displayed.
Each keypad key corresponds to one option in the
view. Press 2 to repeat a voice command, 3 to
switch between day mode and night mode, 4 to
save the current place, and so on.
Traffic information
To purchase a licence for a real-time traffic
information service, select Options > Extras >
Traffic info. The service provides information
about traffic events that may affect your travel.
Downloading extra services may involve the
transmission of large amounts of data through your
service provider’s network. Contact your service
provider for information about data transmission
charges.
To view information about traffic events that can
cause delays or prevent you from reaching the
destination, select Options > Traffic info. The
events are shown on the map as warning triangles
and line indicators. You can use automatic rerouting
to avoid them.
To view more information about an event and the
possible rerouting options, press the scroll key.
To update the traffic information, select Update
traffic info. To define how often the traffic
information is updated automatically, select
Options > Tools > Settings > Navigation >
Traffic info update.
Positioning (GPS)
shows the route and a small arrow at the bottom of
the screen points directly to destination. Satellite
view is only available for Walk navigation.
To automatically create an alternative route in case
of a traffic event that would cause delays or prevent
you from reaching the destination, select
Options > Tools > Settings > Navigation >
Reroute due to traffic > Automatic.
Guides
To purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device, select Options > Extras > 0
Guides.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The
guides must be downloaded and purchased before
use.
65
Positioning (GPS)
To browse a downloaded guide, on the My guides
tab in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
select the desired guide and Download > Yes. The
purchase process starts automatically. You can pay
for the guides using a credit card or have the
amount charged to your phone bill (if supported by
your cellular network service provider).
To confirm the purchase, select OK twice. To receive
a confirmation of the purchase through e-mail,
enter your name and e-mail address, and select
OK.
Landmarks
Press
, and select Tools > Connectivity >
Landmarks.
With Landmarks, you can save the position
information of specific locations in your device. You
can sort the saved locations into different
categories, such as business, and add other
information to them, such as addresses. You can use
your saved landmarks in compatible applications,
such as GPS data and Maps.
66
GPS coordinates are expressed in degrees and
decimal degrees format using the international
WGS-84 coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for your
current location, select Current position. To enter
the position information manually, select Enter
manually.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and
select Options > Edit. Scroll to the desired field,
and enter the information.
To view the landmark on the map, select Options >
Show on map. To create a route to the location,
select Options > Navigate using map.
You can sort your landmarks into preset categories,
and create new categories. To edit and create new
landmark categories, scroll right in Landmarks, and
select Options > Edit categories.
To add a landmark to a category, scroll to the
landmark in Landmarks, and select Options > Add
to category. Scroll to each category to which you
want to add the landmark, and select it.
To send one or several landmarks to a compatible
device, select Options > Send. Your received
landmarks are placed in the Inbox folder in
Messaging.
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and
traveling information, such as the approximate
distance to the destination and approximate
duration of travel.
Press
data.
, and select Tools > Connectivity > GPS
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device
must initially receive position information from at
least four satellites to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Route guidance
Press
, and select Tools > Connectivity > GPS
data > Navigation.
Start the route guidance outdoors. If started
indoors, the GPS receiver may not receive the
necessary information from the satellites.
Route guidance uses a rotating compass on the
device display. A red ball shows the direction to the
destination, and the approximate distance to it is
shown inside the compass ring.
Route guidance is designed to show the straightest
route and the shortest distance to the destination,
measured in a straight line. Any obstacles on the
route, such as buildings and natural obstacles, are
ignored. Differences in altitude are not taken into
account when calculating the distance. Route
guidance is active only when you move.
Positioning (GPS)
GPS data
To set your trip destination, select Options > Set
destination and a landmark as the destination, or
enter the latitude and longitude coordinates. Select
Stop navigation to clear the destination set for
your trip.
Retrieve position information
Press
, and select Tools > Connectivity > GPS
data > Position.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved
locations with more information, and they can be
used in other compatible applications and
transferred between compatible devices.
67
Positioning (GPS)
Trip meter
Press
, and select Tools > Connectivity > GPS
data > Trip distance.
Select Options > Start to activate trip distance
calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this
feature outdoors to receive a better GPS signal.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start
a new calculation. Select Restart to set the
odometer and total time to zero.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
68
With the Web browser, you can view hypertext
markup language (HTML) web pages on the internet
as originally designed. You can also browse web
pages that are designed specifically for mobile
devices, and use extensible hypertext markup
language (XHTML), or the wireless markup language
(WML).
To browse the web, you need to have an internet
access point configured in your device.
Browse the web
Press
, and select Web.
Shortcut: To start the browser, press and
hold 0 in the standby mode.
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
To browse a web page, in the bookmarks view,
select a bookmark, or enter the address in the field
( ), and press the scroll key.
Tip: Use pre-saved Nokia bookmarks in the
bookmarks view to view information about
different services provided by Nokia.
Web browser
Web browser
Some web pages may contain material, such as
graphics and sounds, that requires a large amount
of memory to view. If your device runs out of
memory while loading such a page, the graphics on
the page are not shown.
To browse web pages without graphics, to save
memory, select Options > Settings > Page >
Load content > Text only.
To enter a new web page address you want to visit,
select Options > Go to web address.
Tip: To visit a web page saved as a bookmark
in the bookmarks view, while browsing, press
1, and select a bookmark.
To retrieve the latest content of the page from the
server, select Options > Navigation options >
Reload.
69
Web browser
To save the web address of the current page as a
bookmark, select Options > Save as bookmark.
To use visual history to view snapshots of the pages
you have visited during the current browsing
session, select Back (available if History list is set
on in the browser settings and the current page is
not the first page you visit). To go to a previously
visited page, select the page.
To save a page while browsing, select Options >
Tools > Save page.
You can save pages and browse them later when
offline. You can also group these saved pages into
folders. To access the pages you have saved, select
Options > Bookmarks > Saved pages.
To open a sublist of commands or actions for the
page that is open, select Options > Service
options (if supported by the web page).
To allow or prevent the automatic opening of
multiple windows, select Options > Window >
Block pop-ups or Allow pop-ups.
Shortcuts while browsing
● Press 1 to open your bookmarks.
● Press 2 to search for keywords in the current
page.
70
● Press 3 to return to the previous page.
● Press 5 to list all open windows.
● Press 8 to show the page overview of the current
page. Press 8 again to zoom in and view the
desired section of the page.
● Press 9 to enter a new web address.
● Press 0 to go to the home page (if defined in
settings).
● Press * and # to zoom in or out on the page.
Tip: To return to the standby mode with the
browser open in the background, press
twice or the end key. To return to the browser,
press and hold
, and select the browser
from the list.
Browser toolbar
The browser toolbar helps you select frequently
used functions of the browser.
To open the toolbar, press and hold the scroll key
on an empty spot on a web page. To move within
the toolbar, scroll left or right. To select a feature,
press the scroll key.
In the toolbar, select from the following:
● Frequently used links — View a list of the web
addresses you visit frequently.
● Page overview — See an overview of the
current web page.
● Find — Search for keywords within the current
page.
Navigate pages
Mini Map and page overview help you navigate web
pages that contain a large amount of information.
When Mini Map is set on in the browser settings and
you scroll through a large web page, Mini Map opens
and shows an overview of the web page you
browse.
To set Mini Map on, select Options > Settings >
General > Mini map > On.
To move in Mini Map, scroll left, right, up, or down.
When you find the desired location, stop scrolling.
Mini Map disappears and leaves you at the selected
location.
When you are browsing a web page that contains a
large amount of information, you can also use Page
overview to view what kind of information the
page contains.
To show the page overview of the current page,
press 8. To find the desired spot on the page, scroll
up, down, left, or right. Press 8 again to zoom in and
view the desired section of the page.
Web feeds and blogs
Web feeds are xml files on web pages that are used
by the weblog community and news organisations
to share the latest headlines or text, for example,
news feeds. Blogs or weblogs are web diaries. Most
of the web feeds use RSS and Atom technologies. It
is common to find web feeds on web, blog, and wiki
pages.
Web browser
● Reload — Refresh the page.
● Subscribe to web feeds (if available) — View a
list of available web feeds on the current web
page, and subscribe to a web feed.
The Web application automatically detects if a web
page contains web feeds.
To subscribe to a web feed, select Options >
Subscribe.
To view the web feeds to which you have
subscribed, in the bookmarks view, select Web
feeds.
To update a web feed, select it and Options >
Refresh.
To define how the web feeds are updated, select
Options > Settings > Web feeds.
Widgets
The web browser supports widgets (network
service). Widgets are small, downloadable web
applications that deliver multimedia, news feeds,
and other information, such as weather reports, to
71
Web browser
your device. Installed widgets appear as separate
applications in the Applications folder.
You can download widgets using the Download!
application or from the web.
The default access point for widgets is the same as
in the web browser. When active in the background,
some widgets may update information
automatically to your device.
Content search
To search for keywords, phone numbers, or e-mail
addresses within the current web page, select
Options > Find and the desired option. To go to
the previous match, scroll up. To go to the next
match, scroll down.
Tip: To search for keywords within the page,
press 2.
Download and purchase
items
72
You can download items such as ringing tones,
images, operator logos, themes, and video clips.
These items can be provided free of charge, or you
can purchase them. Downloaded items are handled
by the respective applications in your device, for
example, a downloaded photo or an .mp3 file can
be saved in Gallery.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
To download an item, do the following:
1. Select the link.
2. Select the appropriate option to purchase the
item (for example, "Buy").
3. Carefully read all the information provided.
4. To continue or cancel the download, select the
appropriate option (for example, "Accept" or
"Cancel").
When you start a download, a list of ongoing and
completed downloads from the current browsing
session is displayed.
To modify the list, select Options > Downloads.
In the list, scroll to an item, and select Options to
cancel ongoing downloads, or open, save, or delete
completed downloads.
Bookmarks
The bookmarks view opens when you open the Web
application. You can select web addresses from a list
indicates the starting page defined for the
default access point.
You can save URL addresses as bookmarks while
browsing on the internet. You can also save
addresses received in messages to your bookmarks
and send saved bookmarks.
To open the bookmarks view while browsing, press
1, or select Options > Bookmarks.
To edit the details of a bookmark, such as the title,
select Options > Bookmark manager > Edit.
In the bookmarks view, you can also open other
browser folders. The Web application allows you to
save web pages during browsing. In the Saved
pages folder, you can view the content of the pages
you have saved offline.
Web also keeps track of the web pages you visit
during browsing. In the Auto. bookmarks folder,
you can view the list of visited web pages.
In Web feeds, you can view saved links to web
feeds and blogs to which you have subscribed. Web
feeds are commonly found on major news
organisation web pages, personal weblogs, online
communities that offer the latest headlines, and
article summaries. Web feeds use RSS and Atom
technologies.
Empty the cache
The information or services you have accessed are
stored in the cache memory of the device.
A cache is a memory location that is used to store
data temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
information or services you have accessed are
stored in the cache.
Web browser
or from a collection of bookmarks in the Auto.
bookmarks folder. You can also enter the URL
address of the web page you want to visit directly
into the field ( ).
To empty the cache, select Options > Clear
privacy data > Clear cache.
End the connection
To end the connection and view the browser page
offline, select Options > Tools > Disconnect; or
to end the connection and close the browser, select
Options > Exit.
To take the browser to the background, press the
end key once. To end the connection, press and hold
the end key.
To delete the information the network server
collects about your visits to various web pages,
73
Web browser
select Options > Clear privacy data > Delete
cookies.
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the
device and the internet gateway or server is
encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the
data transmission between the gateway and the
content server.
Security certificates may be required for some
services, such as banking services. You are notified
if the identity of the server is not authentic or if you
do not have the correct security certificate in your
device. For more information, contact your service
provider.
Web settings
Press
, and select Web.
Select Options > Settings and from the following:
74
General settings
● Access point — Change the default access point.
Some or all access points may be preset for your
device by your service provider; you may not be
able to change, create, edit, or remove them.
● Homepage — Define the home page.
● Mini map — Set Mini Map on or off. See "Navigate
pages", p. 71.
● History list — While browsing, to select Back to
see a list of the pages you have visited during the
current browsing session, set History list on.
● Security warnings — Hide or show security
notifications.
● Java/ECMA script — Enable or disable the use of
scripts.
Page settings
● Load content — Select whether you want to
load images and other objects while browsing. If
you select Text only, to load images or objects
later during browsing, select Options > Tools >
Load images.
● Screen size — Select between full screen and the
normal view with the options list.
● Default encoding — If text characters are not
shown correctly, you can select another encoding
according to language for the current page.
● Block pop-ups — Allow or block automatic
opening of different pop-ups while browsing.
Privacy settings
● Auto. bookmarks — Enable or disable
automatic bookmark collecting. If you want to
continue saving the addresses of the visited web
pages into the Auto. bookmarks folder, but hide
the folder from the bookmarks view, select Hide
folder.
● Form data saving — If you do not want the data
you enter to different forms on a web page to be
saved and used the next time you open the page,
select Off.
● Cookies — Enable or disable the receiving and
sending of cookies.
● Acc. point for auto-update — Select the
desired access point for updating. This option is
only available when Automatic updates is on.
Web browser
● Automatic reload — If you want the web pages
to be refreshed automatically while browsing,
select On.
● Font size — Define the font size that is used for
web pages.
Web feed settings
● Automatic updates — Define whether you want
the web feeds to be updated automatically and
how often you want to update them. Setting the
application to retrieve web feeds automatically
may involve the transmission of large amounts
of data through your service provider's network.
Contact your service provider for information
about data transmission charges.
75
Connections
Connections
Your device offers several options to connect to the
internet or to another compatible device or PC.
Wireless LAN
Your device supports wireless local area network
(WLAN). With WLAN, you can connect your device to
the internet and compatible devices that have
WLAN.
About WLAN
To use WLAN, it must be available in the location,
and your device must be connected to the WLAN.
Some places, like France, have restrictions on the
use of wireless LAN. Check with your local
authorities for more information.
Features that use WLAN, or that are allowed to run
in the background while using other features,
increase the demand on battery power and reduce
the battery life.
Your device supports the following WLAN features:
76
● IEEE 802.11b/g standard
● Operation at 2.4 GHz
● Wired equivalent privacy (WEP) with keys up to
128 bits, Wi-Fi protected access (WPA), and
802.1x encryption methods. These functions can
be used only if they are supported by the
network.
WLAN connections
To use WLAN, you must create an internet access
point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
See "WLAN internet access points", p. 77.
Important: Always enable one of the
available encryption methods to increase the
security of your wireless LAN connection. Using
encryption reduces the risk of unauthorized access
to your data.
A WLAN connection is established when you create
a data connection using a WLAN internet access
point. The active WLAN connection ends when you
end the data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example, WLAN
network found is displayed, to create an internet
access point (IAP) and start the web browser using
this IAP, select the status and Start Web
browsing.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
create a new access point for a hidden WLAN, select
New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and Continue Web browsing. To
end the connection in the WLAN, select the status
and Disconnect WLAN.
If WLAN scanning is off and you are not connected
to any WLAN, WLAN scanning off is displayed. To
set scanning on and search for available WLANs,
select the status and press the scroll key.
Connections
WLAN access point device at a time, but several
applications can use the same internet access point.
To start a search for available WLANs, select the
status and Search for WLAN. To set WLAN scanning
off, select the status and select WLAN scanning
off.
To access the WLAN wizard application in the menu,
press
, and select Tools > WLAN wiz..
WLAN internet access points
Press
, and select Tools > WLAN wiz.
Select Options and from the following:
● Filter WLAN networks — Filter out WLANs in
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
● Details — View the details of a network shown
in the list. If you select an active connection, the
connection details are displayed.
● Define access point — Create an internet access
point (IAP) in a WLAN.
77
Connections
● Edit access point — Edit the details of an
existing IAP.
You can also use connection manager to create
internet access points. See "Active data
connections", p. 78.
Operating modes
There are two operating modes in WLAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two
kinds of communication: wireless devices are
connected to each other through a WLAN access
point device, or wireless devices are connected to a
wired LAN through a WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Connection manager
Active data connections
Press
, and select Tools > Connectivity >
Conn. mgr. > Active data connections.
In the active data connections view, you can see the
open data connections:
78
data calls
packet data connections
WLAN connections
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and so
forth.
To end a connection, select Options >
Disconnect. To close all open connections, select
Options > Disconnect all.
To view the details of a connection, select
Options > Details. The details shown depend on
the connection type.
Available WLAN networks
Press
, and select Tools > Connectivity >
Conn. mgr. > Available WLAN networks.
The available WLAN view shows a list of WLANs
within range, their network mode (infrastructure or
ad hoc), and signal strength indicator. is shown
if your device
for networks with encryption, and
has an active connection in the network.
To view the details of a network, select Options >
Details.
To create an internet access point in a network,
select Options > Define access point.
About Bluetooth connectivity
You can make a wireless connection to other
compatible devices with Bluetooth connectivity.
Compatible devices may include mobile phones,
computers, and enhancements such as headsets
and car kits. You can use Bluetooth connectivity to
send images, video clips, music and sound clips, and
notes; make a wireless connection to your
compatible PC (for example, to transfer files); and
connect to a compatible printer to print images
with Image print.
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need
to be in direct line-of-sight. However, they must be
within 10 metres (33 feet) of each other, although
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth
Specification 2.0 supporting the following profiles:
Advanced Audio Distribution Profile, Audio/Video
Remote Control Profile, Basic Imaging Profile, Basic
Printing Profile, Dial-up Networking Profile, File
Transfer Profile, Hands-Free Profile, Headset Profile,
Human Interface Device Profile, Object Push Profile,
SIM Access Profile, and Synchronization Profile. To
ensure interoperability between other devices
supporting Bluetooth technology, use Nokia
approved enhancements for this model. Check with
the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Connections
Bluetooth connectivity
Features using Bluetooth technology, or allowing
such features to run in the background while using
other features, increase the demand on battery
power and reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See "Phone and SIM", p. 149.
Settings
Press
, and select Tools > Bluetooth.
When you open the application for the first time,
you are asked to define a name for your device. You
can change the name later on.
Select from the following:
● Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On, then establish a connection. To
switch off Bluetooth connectivity, select Off.
● My phone's visibility — To allow your device to
be found by other devices with Bluetooth
wireless technology, select Shown to all. To set
a time after which the visibility is set from shown
79
Connections
to hidden, select Define period. To hide your
device from other devices, select Hidden.
● My phone's name — Edit the name shown to
other devices with Bluetooth wireless
technology.
● Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On. See "Remote SIM
mode", p. 81.
Security tips
Press
, and select Tools > Bluetooth.
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
select Bluetooth > Off or My phone's visibility >
Hidden.
Do not pair with or accept connection requests from
an unknown device. This protects your device from
harmful content.
Send data using Bluetooth
connectivity
80
Several Bluetooth connections can be active at a
time. For example, if you are connected to a
compatible headset, you can also transfer files to
another compatible device at the same time.
1. Open the application where the item you want
to send is stored. For example, to send an image
to another compatible device, open Gallery.
2. Select the item and Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are
as follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to
connect.
4. If the other device requires pairing before data
can be transmitted, a tone sounds, and you are
asked to enter a passcode. See "Pair
devices", p. 81.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some
devices may show only the unique address
(device address). To find the unique address
of your device, enter *#2820# in the standby
mode.
To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
3. Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
Options > Connect to audio device.
Paired devices are indicated by
search.
in the device
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
● Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust. indicates authorised
devices in the paired devices view.
● Set as unauthorised — Connection requests
from this device must be accepted separately
every time.
Connections
Pair devices
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select Options >
Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if
you want to accept the message. If you accept,
is displayed, and the item is placed in the
Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
.
Remote SIM mode
Before the remote SIM mode can be activated, the
two devices must be paired and the pairing initiated
from the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
81
Connections
To use the remote SIM mode with a compatible car
kit enhancement, activate Bluetooth connectivity,
and enable the use of the remote SIM mode with
your device. Activate the remote SIM mode from the
other device.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby
mode. The connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area, and you cannot use SIM card services
or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls
while in this mode, except to the emergency
numbers programmed into your device. To make
calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code
to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
USB
82
Press
USB.
, and select Tools > Connectivity >
To have the device ask the purpose of the
connection each time a compatible data cable is
connected, select Ask on connection > Yes.
If Ask on connection is set to off or you want to
change the mode during an active connection,
select USB mode and from the following:
● PC Suite — Use Nokia PC applications such as
Nokia Nseries PC suite, Nokia Lifeblog, and Nokia
Software Updater.
● Data transfer — Transfer data between your
device and a compatible PC. Use this mode also
for downloading maps with the Nokia Map
Loader PC application.
● Image print — Print images on a compatible
printer.
● Media player — Synchronise music with
Windows Media Player.
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications
applications. With Nokia Nseries PC Suite you can,
for example, transfer images between your device
and a compatible PC.
Always create the connection from the PC to
synchronise with your device.
Nokia Video Centre
Nokia Video Centre
With Nokia Video Centre (network service), you can
download and stream video clips over the air from
compatible internet video services using packet
data or WLAN. You can also transfer video clips from
a compatible PC to your device and view them in
Video Centre.
Video Centre supports the same file formats as
RealPlayer. All videos are played in the landscape
mode by default.
Your device may have predefined services.
Service providers may provide free content or
charge a fee. Check the pricing in the service or from
the service provider.
Find and view videos
1. Press
, and select Video centre.
2. To connect to a service, scroll left or right, and
select the desired video service.
The device updates and displays the content
available in the service.
3. To view videos by categories (if available), scroll
left or right to view the other tabs.
4. To view information about a video, select
Options > Video details.
5. Some video clips can be streamed over the air,
but others must be first downloaded to your
device. To download a video clip, select
Options > Download.
To stream a video clip or view a downloaded clip,
select Options > Play.
83
Nokia Video Centre
6. When the clip is playing, use the scroll key and
the selection keys to control the player. To adjust
the volume, press the volume key.
Downloads continue in the background if you exit
the application. The downloaded videos are saved
in Video centre > My videos.
To connect to the internet to browse available
services that you can add to the main view, select
Add new services.
Internet videos
Internet videos are video clips distributed in the
internet using RSS-based feeds. You can add new
feeds to Internet videos in the settings.
You can view your feeds in the Internet videos
folder in Video Centre.
To add or delete feeds, select Options > Feed
subscriptions.
To view the videos available in a feed, scroll to it,
and press the scroll key.
To view information about a video, select
Options > Video details.
84
To download a video, scroll to it, and select
Options > Download.
To play the downloaded video, press the scroll key.
Play downloaded videos
The downloaded videos are saved in Video
centre > My videos.
To play a downloaded video, press the scroll key.
To play a downloaded video in the home network,
select Options > Show via home network. Home
network must be configured first. See "About home
network", p. 53.
When the clip is playing, use the scroll key and the
selection keys to control the player.
If there is not enough free space in the device
memory and compatible memory card, the
application automatically deletes some of the
oldest videos when new videos are downloaded.
indicates videos that may soon be deleted.
To prevent a video from being automatically
deleted ( ), select Options > Protect.
Transfer videos from your PC
Transfer your own videos to Video Centre from
compatible devices using a compatible USB data
cable.
To transfer videos from a compatible PC to the
memory card in your device, do the following:
2. Select Data transfer as the connection mode. A
compatible memory card needs to be inserted in
the device.
3. Select the videos you want to copy from your PC.
4. Transfer the videos to E:\My Videos in the
memory card.
The transferred videos appear in the My
videos folder in Video Centre. Video files in other
folders of your device are not displayed.
Settings
the transmission of large amounts of data
through your service provider's network. Contact
your service provider for information about data
transmission charges.
● Parental control — Activate the parental lock
for video services.
● Preferred memory — Select whether
downloaded videos are saved in the device
memory or on a compatible memory card. If the
selected memory becomes full, the device saves
the content in the other memory, if available. If
there is not enough space in the other memory,
the application automatically deletes some of
the oldest videos.
● Thumbnails — Select whether to view
thumbnail images in video lists.
Nokia Video Centre
1. To view your device on a PC as a mass memory
device (E:\) where you can transfer any data
files, make the connection with a compatible
USB data cable.
In the Video Centre main view, select Options >
Settings and from the following:
● Video service selection — Select the video
services you want to appear in the main view of
the application. You can also view the details of
a video service.
Some services require a user name and a
password that you receive from the service
provider.
● Default access points — Select the access
points used for the data connection. Using packet
data access points to download files may involve
85
Music folder
Music folder
Music player
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Music player supports files formats such as AAC, AAC
+, eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering
audio or video content over the internet using
either RSS or Atom technologies for playback on
mobile devices and PCs.
You can transfer music from other compatible
devices to your device. See "Transfer music to your
device", p. 89.
Play a song or a podcast episode
86
You may have to refresh the music and podcast
libraries after you have updated the song or podcast
selection in your device. To add all available items
to the library, in the Music player main view, select
Options > Refresh.
To play a song or a podcast episode, do the
following:
1. Press
, and select Music > Music player.
2. Select Music or Podcasts.
3. Select categories to navigate to the song or
podcast episode you want to hear.
4. To play the selected files, press the scroll key.
To pause playback, press the scroll key; to resume,
press the scroll key again. To stop playback, scroll
down.
To fast forward or rewind, press and hold the scroll
key to the right or left.
To go to the next
item, scroll right.
To return to the
beginning of the
item, scroll left. To
skip to the
previous item,
scroll left again
To switch random play (
Options > Shuffle.
) on or off, select
To repeat the current item ( ), all items ( ), or
to switch repeat off, select Options > Repeat.
If you play podcasts, shuffle and repeat are
automatically switched off.
To adjust the volume, press the volume key.
To modify the tone of the music playback, select
Options > Equaliser.
To modify the balance and stereo image or to
enhance bass, select Options > Audio settings.
To view a visualisation during playback, select
Options > Show visualisation.
To return to the standby mode and leave the player
playing in the background, press the end key, or to
switch to another open application, press and hold
.
To close the player, select Options > Exit.
Music menu
Press
Music.
, and select Music > Music player >
The music menu shows the available music. Select
the desired option in the music menu to view all
songs, sorted songs, or playlists.
When the Music player is playing in the background,
to open the Now playing view, press and hold the
multimedia key.
Music folder
within 2 seconds after a song or podcast has started.
Playlists
Press
Music.
, and select Music > Music player >
To view and manage playlists, in the music menu,
select Playlists.
To view details of the playlist, select Options >
Playlist details.
Create a playlist
1. Select Options > Create playlist.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes; or to add the
songs later, select No.
4. If you select Yes, select artists to find the songs
you want to include in the playlist. Press the
scroll key to add items.
To show the song list under an artist title, scroll
right. To hide the song list, scroll left.
5. When you have made your selections, select
Done.
87
Music folder
If a compatible memory card is inserted, the
playlist is saved to the memory card.
To add more songs later, when viewing the playlist,
select Options > Add songs.
To add songs, albums, artists, genres, and
composers to a playlist from the different views of
the music menu, select an item and Options > Add
to a playlist > Saved playlist or New playlist.
To remove a song from a playlist, select Options >
Remove. This does not delete the song from the
device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select Options > Reorder list.
To grab songs and drop them to a new position, use
the scroll key.
Podcasts
Press
, and select Music > Music player >
Podcasts.
The podcast menu displays the podcasts available
in the device.
88
Podcast episodes have three states: never played,
partially played, and completely played. If an
episode is partially played, it plays from the last
playback position the next time it is played. If an
episode is never played or completely played, it
plays from the beginning.
Home network with music player
You can play content stored in your Nokia device
remotely on compatible devices in a home network.
You can also copy files from your Nokia device to
other devices that are connected to the home
network. Home network must be configured first.
See "About home network", p. 53.
Play a song or a podcast remotely
1. Press
, and select Music > Music player.
2. Select Music or Podcasts.
3. Select categories to navigate to the song or
podcast episode you want to hear.
4. Select the desired song or podcast and
Options > Play > Via home network.
5. Select the device in which the file is played.
Copy songs or podcasts wirelessly
To copy or transfer media files from your device to
another compatible device in a home network,
select a file and Options > Move and copy > Copy
to home network or Move to home net.. Content
sharing does not have to be switched on in the
home network settings. See "Set sharing on and
define content", p. 54.
You can transfer music from a compatible PC or
other compatible devices using a compatible USB
data cable or Bluetooth connectivity.
PC requirements for music transfer:
● Microsoft Windows XP operating system (or
later)
● A compatible version of the Windows Media
Player application. You can get more detailed
information about Windows Media Player
compatibility from your device's product pages
on the Nokia website.
● Nokia Nseries PC Suite 1.6 or later
Windows Media Player 10 may cause playback
delays to WMDRM technology protected files after
they have been transferred to your device. Check
Microsoft support website for a hotfix to Windows
Media Player 10 or get a newer compatible version
of Windows Media Player.
Transfer music from PC
You can use three different methods to transfer
music:
● To view your device on a PC as a mass memory
device where you can transfer any data files,
make the connection with a compatible USB data
cable or Bluetooth connectivity. If you are using
the USB cable, select Data transfer as the
connection mode. A compatible memory card
needs to be inserted in the device.
● To synchronise music with Windows Media
Player, connect the compatible USB data cable
and select Media player as the connection
mode. A compatible memory card needs to be
inserted in the device.
Music folder
Transfer music to your device
● To use Nokia Music Manager in Nokia Nseries PC
Suite, connect the compatible USB data cable and
select PC Suite as the connection mode.
Use Data transfer and Media player modes to
transfer files to a compatible memory card.
To change the default USB connection mode, press
, and select Tools > Connectivity > USB >
USB mode.
Both Windows Media Player and Nokia Music
Manager in Nokia Nseries PC Suite have been
optimised to transfer music files. For information
about transferring music with Nokia Music
Manager, see the help function on Nokia Nseries PC
Suite or visit the Nokia support pages.
Transfer with Windows Media Player
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and
help.
89
Music folder
Manual synchronisation
With manual synchronisation, you can select the
songs and playlists that you want to move, copy, or
remove.
1. After your device is connected with Windows
Media Player, select your device in the
navigation pane on the right, if more than one
device is connected.
2. In the left navigation pane, browse the music
files on your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the
right.
You can see the amount of available memory in
your device above the Sync List.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
3. To finalise the setup for automatic
synchronisation, click Finish.
When the Sync this device automatically check
box is checked and you connect your device to the
PC, the music library in your device is automatically
updated based on the playlists you select for
synchronisation in Windows Media Player. If no
playlists have been selected, the whole PC music
library is selected for synchronisation. If there is not
enough free memory in your device, Windows
Media Player selects manual synchronisation
automatically.
To stop automatic synchronisation, click the Sync
tab, and select Stop Sync to 'Nokia Handset'.
5. To start the synchronisation, click Start Sync.
Nokia Music Store
1. To activate the automatic synchronisation
function in Windows Media Player, click the
Sync tab, select Nokia Handset > Set Up
Sync..., and check the Sync this device
automatically check box.
To check the Nokia Music Store availability in your
country, visit music.nokia.com.
Automatic synchronisation
90
The selected items are transferred to the
Playlists to sync pane.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane,
and click Add.
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you first need to
register for the service.
To access the Nokia Music Store, you must have a
valid internet access point in the device.
, and select
To find more music in different categories of the
music menu, select Options > Find in Music
store.
Nokia Music Store settings
The availability and appearance of the music store
settings may vary. The settings may also be
predefined and not editable. If the settings are not
predefined, you may be asked to select the access
point to use when connecting to the music store. To
select the access point, select Default acc. pt..
In the music store, you may be able to edit the
settings by selecting Options > Settings.
Radio
You can use the radio as a traditional FM radio with
automatic tuning and saved stations or with
parallel visual information related to the radio
programme on the display if you tune to stations
that offer Visual Radio service. The Visual Radio
service uses packet data (network service).
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
When you open the radio for the first time, a wizard
helps you to save local radio stations (network
service).
If you do not have access to the Visual Radio service,
the operators and radio stations in your area may
not support Visual Radio.
Music folder
To open Nokia Music Store, press
Music > Music store.
Listen to the radio
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for
the FM radio to function properly.
Press
, and select Music > Radio.
Note that the quality of the radio broadcast
depends on the coverage of the radio station in that
particular area.
You can normally make a call or answer an incoming
call while listening to the radio. The radio is muted
when there is an active call.
To start a station search, select
or
. To
change the frequency manually, select Options >
Manual tuning.
If you have previously saved radio stations, to go to
the next or previous saved station, select
or
.
91
Music folder
To adjust the volume, press the volume key.
To listen to the radio using the loudspeaker, select
Options > Activate loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of
your saved stations, select Options > Stations.
To return to the standby mode and allow the FM
radio to play in the background, select Options >
Play in background.
To change station details, select Options >
Station > Edit.
Settings
Press
, and select Music > Radio.
Select Options > Settings and from the following:
When the connection to the visual service is
established, the current visual content is displayed.
● Start-up tone — Select whether a tone is played
when the application is started.
● Auto-start service — To start Visual Radio
automatically when you select a saved station
that offers Visual Radio service, select Yes.
● Access point — Select the access point used for
the data connection. You do not need an access
point to use the application as an ordinary FM
radio.
● Current region — Select the region in which you
are currently located. This setting is displayed
only if there is no network coverage when the
application is started.
Saved stations
Nokia Podcasting
View visual content
To check availability and costs and to subscribe to
the service, contact your service provider.
To view available visual content for a tuned station,
select
or Options > Start visual service. If the
visual service ID has not been saved for the station,
enter it, or select Retrieve to search for it in the
station directory (network service).
92
To listen to a saved station, select Options >
Station > Listen. To view available visual content
for a station with Visual Radio service, select
Options > Station > Start visual service.
To open the list of your saved stations, select
Options > Stations.
With the Nokia Podcasting application (network
service), you can search, discover, subscribe to, and
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Settings
Before using Nokia Podcasting, set your connection
and download settings.
The recommended connection method is WLAN.
Check with your service provider for terms and data
service fees before using other connections. For
example, a flat rate data plan can allow large data
transfers for one monthly fee.
Connection settings
To edit the connection settings, press
, and
select Music > Podcasting > Options >
Settings > Connection. Define the following:
● Default access point — Select the access point
to define your connection to the internet.
● Search service URL — Define the podcast search
service to be used in searches.
Download settings
To edit the download settings, press
, and select
Music > Podcasting > Options > Settings >
Download. Define the following:
● Save to — Define the location where you want
to save your podcasts.
● Update interval — Define how often podcasts
are updated.
● Next update date — Define the date of the next
automatic update.
● Next update time — Define the time of next
automatic update.
Music folder
download podcasts over the air, and play, manage,
and share audio and video podcasts with your
device.
Automatic updates only occur if a specific default
access point is selected and Nokia Podcasting is
running. If Nokia Podcasting is not running, the
automatic updates are not activated.
● Download limit (%) — Define the size of the
memory that is used for podcast downloads.
● If limit exceeds — Define what to do if the
downloads exceed the download limit.
Setting the application to retrieve podcasts
automatically may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for
information about data transmission charges.
To restore the default settings, select Options >
Restore default in the settings view.
93
Music folder
Search
Directories
The search engine uses the podcast search service
you set up in Podcasting > Options > Settings >
Connection > Search service URL.
To open directories, press
, and select Music >
Podcasting > Directories.
Search helps you to find podcasts by keyword or
title.
To search for podcasts, press
, select Music >
Podcasting > Search, and enter the desired
keywords.
Tip: Search looks for podcast titles and
keywords in descriptions, not specific
episodes. General topics, such as football or
hip-hop, usually give better results than a
specific team or artist.
To subscribe to marked channels and add them to
your podcasts, select Options > Subscribe. You
can also add a podcast by selecting one.
To start a new search, select Options > New
search.
To go the website of the podcast, select Options >
Open web page (network service).
To see the details of a podcast, select Options >
Description.
94
To send selected podcasts to another compatible
device, select Options > Send.
Directories help you to find new podcast episodes
to which to subscribe.
Contents of the directories change. Select the
desired directory folder to update it (network
service). When the colour of the folder changes,
press the scroll key again to open it.
Directories can include top podcasts listed by
popularity or themed folders.
To open the desired folder topic, press the scroll key.
A list of podcasts is displayed.
To subscribe to a podcast, select the title, and press
the scroll key. After you have subscribed to episodes
of a podcast, you can download, manage, and play
them in the podcasts menu.
To add a new directory or folder, select Options >
New > Web directory or Folder. Select a title, URL
of the .opml (outline processor markup language)
file, and Done.
To edit the selected folder, web link, or web
directory, select Options > Edit.
To import an .opml file stored on your device, select
Options > Import OPML file. Select the location of
the file, and import it.
When you receive a message with an .opml file
using Bluetooth connectivity, open the file to save
the file into the Received folder in directories. Open
the folder to subscribe to any of the links to add to
your podcasts.
Downloads
After you have subscribed to a podcast, from
directories, search, or by entering a URL, you can
manage, download, and play episodes in
Podcasts.
To see the podcasts you have subscribed to, select
Podcasting > Podcasts.
To see individual episode titles (an episode is a
particular media file of a podcast), select the
podcast title.
To start a download, select the episode title. To
download or to continue to download selected or
marked episodes, select Options > Download or
Continue download. You can download multiple
episodes at the same time.
To play a portion of a podcast during download or
after partial downloading, select the podcast and
Options > Play preview.
Fully downloaded podcasts can be found in the
Podcasts folder, but are not shown until the library
is refreshed.
Play and manage podcasts
To display the available episodes from the selected
podcast, select Options > Open. Under each
episode, you see the file format, the size of the file,
and time of the upload.
Music folder
To send a directory folder as a multimedia message
or using Bluetooth connectivity, select the folder
and Options > Send.
When the podcast is fully downloaded, to play the
full episode, select Podcasts > Options > Play, or
press
and select Music > Music player >
Podcasts.
To update the selected podcast or marked podcasts,
for a new episode, select Options > Update.
To stop the updating, select Options > Stop
update.
To add a new podcast by entering the URL of the
podcast, select Options > New podcast. If you do
not have an access point defined or if during packet
data connection you are asked to enter a user name
and password, contact your service provider.
To edit the URL of the selected podcast, select
Options > Edit.
To delete a downloaded podcast or marked
podcasts from your device, select Options >
Delete.
95
Music folder
To send the selected podcast or marked podcasts to
another compatible device as .opml files as a
multimedia message or by Bluetooth connectivity,
select Options > Send.
To update, delete, and send a group of selected
podcasts at once, select Options > Mark/
Unmark, mark the desired podcasts, and select
Options to choose the desired action.
To open the website of the podcast (network
service), select Options > Open web page.
Some podcasts provide the opportunity to interact
with the creators by commenting and voting. To
connect to the internet to do this, select Options >
View comments.
96
RealPlayer
Stream content over the air
RealPlayer supports files with extensions such as .
3gp, .mp4, or .rm. However, RealPlayer does not
necessarily support all file formats or all the
variations of file formats.
In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer plays a .ram file if you
open an http link to it in a browser.
With RealPlayer, you can play video clips or stream
media files over the air without saving them to the
device first.
Play video clips
Press
, and select Applications > Media >
RealPlayer.
1. To play a saved media file, select Options >
Open and from the following:
● Most recent clips — Play one of the last six
files played in RealPlayer.
● Saved clip — Play a file saved in Gallery.
2. Scroll to a file, and press the scroll key to play the
file.
To adjust the volume, use the volume key.
Many service providers require you to use an
internet access point (IAP) for your default access
point. Other service providers allow you to use a
WAP access point.
Media folder
Media folder
To stream content over the air (network service),
select a streaming link saved in Gallery, on a web
page, or received in a text message or multimedia
message. Before live content begins streaming,
your device connects to the site and starts loading
the content. The content is not saved in your device.
RealPlayer settings
Press
, and select Applications > Media >
RealPlayer.
You may receive RealPlayer settings in a special
message from the service provider. For more
information, contact your service provider.
Select Options > Settings and from the following:
97
Media folder
● Video — Select whether video clips are
automatically repeated after they finish playing.
● Streaming — Select whether to use a proxy
server, change the default access point, and set
the port range used when connecting. Contact
your service provider for the correct settings.
Adobe Flash Player
Press
, and select Applications > Media >
Flash Player.
Use Adobe Flash Player to view, play, and interact
with compatible flash files made for mobile devices.
To open a flash file, scroll to it, and select it.
Nokia Lifeblog
Nokia Lifeblog keeps a multimedia diary of the
items that you collect with your device. Lifeblog
organises your photos, videos, sounds, text
messages, multimedia messages, and weblog posts
into a chronology that you can browse, search,
share, publish, and back up.
98
Lifeblog mobile automatically keeps track of your
multimedia items. Use Lifeblog on your device to
browse your items, send them to others, or publish
them on the web.
For safekeeping, you can back up your Nokia
Lifeblog database using the hard disk of your
compatible PC or compatible CDs, DVDs, removable
drive, or network drive. Additionally, you can post
items to your compatible weblog (blog).
For more information on weblog services and their
compatibility with Nokia Lifeblog, visit
www.nokia.com/lifeblog.
Press
, and select Applications > Media >
Lifeblog. The time line view opens and shows your
multimedia items.
To open your saved favourites, select Options >
View Favourites.
Activation keys
To view digital rights activation keys, press
, and
select Applications > Media > Actv. keys.
Digital rights management
Content owners may use different types of digital
rights management (DRM) technologies to protect
their intellectual property, including copyrights.
This device uses various types of DRM software to
access DRM-protected content. With this device you
can access content protected with WMDRM 10, OMA
DRM 1.0, and OMA DRM 2.0. If certain DRM software
fails to protect the content, content owners may ask
that such DRM software's ability to access new DRM-
Digital rights management (DRM) protected content
comes with an associated activation key that
defines your rights to use the content.
If your device has OMA DRM protected content, to
back up both the activation keys and the content,
use the backup feature of Nokia PC Suite. Other
transfer methods may not transfer the activation
keys which need to be restored with the content for
you to be able to continue the use of OMA DRM
protected content after the device memory is
formatted. You may also need to restore the
activation keys in case the files on your device get
corrupted.
If your device has WMDRM protected content, both
the activation keys and the content will be lost if the
device memory is formatted. You may also lose the
activation keys and the content in case the files on
your device get corrupted. Losing the activation
keys or the content may limit your ability to use the
same content on your device again. For more
information, contact your service provider.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
In the main view, select from the following:
● Valid keys — View keys that are connected to
media files or whose validity period has not
begun.
● Invalid keys — View keys that are not valid; the
time period for using the media file is exceeded
or there is a protected media file in the device
but no connected activation key.
● Not in use — View keys that have no media files
connected to them in the device.
Media folder
protected content be revoked. Revocation may also
prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM
software does not affect the use of content
protected with other types of DRM or the use of nonDRM-protected content.
To buy more usage time for a media file, select an
invalid activation key and Options > Get new
key (web service messages must be enabled). See
"Web service message settings", p. 118.
To view detailed information, such as the validity
status and ability to send the file, scroll to an
activation key, and press the scroll key.
Recorder
Press
, and select Applications > Media >
Recorder.
With Recorder, you can record voice memos and
telephone conversations.
99
Media folder
100
To record a telephone conversation, open Recorder
during a voice call. Both parties hear a tone every 5
seconds during recording.
You can personalise your device by changing the
standby mode, main menu, tones, themes, or font
size. Most of the personalisation options, such as
changing the font size, can be accessed through the
device settings. See "Personalisation
settings", p. 147.
Themes
Press
, and select Tools > Settings >
General > Personalisation > Themes.
You can change the look of the display, such as the
wallpaper and icons.
To change the theme that is used for all the
applications in your device, select General.
To preview a theme before activating it, select
Options > Preview. To activate the theme, select
Options > Set. The active theme is indicated by
.
The themes on a compatible memory card (if
inserted) are indicated by
. The themes on the
memory card are not available if the memory card
is not inserted in the device. If you want to use the
themes saved in the memory card without the
memory card, save the themes in the device
memory first.
To change the layout of the main menu, select Menu
view.
To open a browser connection and download more
themes, in General or Menu view, select
Download themes (network service).
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Personalise your device
Personalise your device
To edit the wallpaper and power saver of the
current theme that appear in the standby mode,
select Wallpaper to change the background image
or Power saver to change the power saver.
Profiles—set tones
Press
, and select Tools > Profiles.
You can set and customise the ringing tones,
message alert tones, and other tones for different
events, environments, or caller groups.
101
Personalise your device
To change the profile, select a profile, and
Options > Activate. To also change the profile,
press the power key in the standby mode. Scroll to
the profile you want to activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored on a compatible memory card
(if inserted) are indicated with
.
In the tones list, select Download sounds (network
service) to open a list of bookmarks. You can select
a bookmark and start connection to a web page to
download more tones.
If you want the caller’s name to be spoken when
your device rings, select Options > Personalise,
and set Say caller's name to On. The caller’s name
must be saved in Contacts.
To create a new profile, select Options > Create
new.
3-D tones
102
Press
, select Tools > Utilities > 3-D tones.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select Sound trajectory and the
desired effect.
To modify the effect, select from the following
settings:
● Trajectory speed — Scroll left or right to adjust
the speed at which sound moves from one
direction to another. This setting is not available
for all ringing tones.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing
tone sound louder when you are closer to your
device, and softer when you are farther away.
When you get closer to the device, the ringing
tone appears to become louder, and softer when
you move away from it. This setting is not
available for all ringing tones.
To listen to the ringing tone with the 3-D effect,
select Options > Play tone. If you enable the 3-D
tones but do not select any 3-D effect, stereo
widening is applied to the ringing tone.
You can also change the standby mode background
image or what is shown in the power saver. See
"Themes", p. 101.
Modify the standby mode
Modify the main menu
To switch the active standby on or off, press
,
and select Tools > Settings > General >
Personalisation > Standby mode > Active
standby. The active standby display shows
application shortcuts, and
events from applications
such as calendar and
player.
To change the selection
key shortcuts or the
default shortcut icons in
the active standby mode,
select Tools > Settings >
General >
Personalisation >
Standby mode. Some
shortcuts may be fixed, and you cannot change
them.
To change the clock shown in the standby mode,
press
, and select Applications > Clock >
Options > Settings > Clock type.
To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or
List.
To rearrange the main menu, in the main menu,
select Options > Move, Move to folder, or New
folder. You can move less used applications into
folders and place applications that you use more
often into the main menu.
Personalise your device
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing
volume.
To use animated icons in your device, in the main
menu, select Options > Icon animation > On.
103
Time management
Time management
Clock
Alarm clock
Press
, and select Applications > Clock.
To set a new quick alarm, select Options > New
quick alarm. Quick alarms are set for the next 24
hours and they cannot be repeated.
To view your active and inactive alarms, scroll right
to the alarm tab. To set a new alarm, select
Options > New alarm. Define the repetition, if
needed. When an alarm is active,
is shown.
To turn off the sounding alarm, select Stop. To stop
the alarm for 5 minutes, select Snooze.
If the alarm time is reached while the device is
switched off, the device switches itself on and starts
sounding the alarm tone. If you select Stop, the
device asks whether you want to activate the device
for calls. Select No to switch off the device or Yes to
make and receive calls. Do not select Yes when
wireless phone use may cause interference or
danger.
104
To cancel an alarm, select Options > Remove
alarm.
To change the time, date, and clock type settings,
select Options > Settings.
To allow the mobile phone network to update the
time, date, and time zone information to your
device (network service), in the settings, select
Network operator time > Auto-update.
World clock
Press
, and select Applications > Clock.
To open the world clock view, scroll right to the
world clock tab. In the world clock view, you can
view the time in different cities. To add cities to the
list, select Options > Add city. You can add a
maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed
in the clock main view, and the time in your device
is changed according to the city selected. Ensure
that the time is correct and matches your time zone.
Create a calendar entry
Press
, and select Applications > Calendar.
1. To add a new calendar
entry, scroll to the
desired date, and select
Options > New
entry and one of the
following:
● Meeting — to
remind you of an
appointment that
has a specific date
and time
● Memo — to write a
general entry for a day
● Anniversary — to remind you of birthdays or
special dates (entries are repeated annually)
● To-do — to remind you of a task that must be
done by a specific date
2. Fill in the fields. To set an alarm, select Alarm >
On, and enter the alarm time and date.
To add a description for an entry, select
Options > Add description.
3. To save the entry, select Done.
Tip: In the day, week, or month calendar
view, press any key (1-0). An appointment
entry opens, and the characters you enter are
added to the subject field. In the to-do view,
a to-do note entry opens.
When the calendar alarm sounds for a note, select
Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. To stop the
calendar alarm, select Stop. To set the alarm to
snooze, select Snooze.
Time management
Calendar
Calendar views
To change the starting day of the week or the view
that is shown when you open the calendar, select
Options > Settings.
To go to a certain date, select Options > Go to
date. To jump to today, press #.
To switch between the month view, week view, day
view, and to-do view, press *.
To send a calendar note to a compatible device,
select Options > Send.
If the other device is not compatible with
Coordinated Universal Time (UTC), the time
information of received calendar entries may not be
displayed correctly.
105
Time management
To modify the calendar, select Options >
Settings > Calendar alarm tone, Default view,
Week starts on, or Week view title.
Manage calendar entries
To delete several events at a time, go to the month
view, and select Options > Delete entry > Before
date or All entries.
To mark a task as completed, scroll to it in the to-do
view, and select Options > Mark as done.
You can synchronise your calendar with a
compatible PC using Nokia Nseries PC Suite. When
creating a calendar entry, set the desired
synchronisation option.
106
Only devices that have compatible features can
receive and display multimedia messages. The
appearance of a message may vary depending on
the receiving device.
Messaging main view
Press
, and select Messaging (network service).
To create a new message, select New message.
Messaging contains the following folders:
Inbox — Received messages, except e-mail
and cell broadcast messages, are stored here.
●
My folders — Organise your messages into
folders.
●
Tip: To avoid rewriting messages that you
send often, use texts in the Templates folder
in My folders. You can also create and save
your own templates.
Mailbox — Connect to your remote mailbox
to retrieve your new e-mail messages, or view
your previously retrieved e-mail messages
offline.
●
Drafts — Draft messages that have not been
sent are stored here.
●
Sent — The last messages that have been
sent, excluding messages sent using Bluetooth
connectivity, are stored here. You can change the
number of messages to save in this folder.
●
Outbox — Messages waiting to be sent are
temporarily stored in the outbox, for example,
when your device is outside network coverage.
●
Reports — You can request the network to
send you a delivery report of the text messages
and multimedia messages you have sent
(network service).
●
Messaging
Messaging
To enter and send service requests (also known as
USSD commands), such as activation commands for
network services, to your service provider, select
Options > Service command in the Messaging
main view.
Cell broadcast (network service) allows you to
receive messages on various topics, such as
weather or traffic conditions, from your service
provider. For available topics and relevant topic
numbers, contact your service provider. In the
Messaging main view, select Options > Cell
broadcast.
107
Messaging
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent
cell broadcast reception.
Write text
Your device supports traditional text input and
predictive text input. With predictive text, you can
enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which
you can add new words.
When you write text,
is displayed when you
write text using traditional text input and
when using predictive text input.
Traditional text input
Press a number key (1–9) repeatedly until the
desired character appears. There are more
characters available for a number key than are
printed on the key.
If the next letter is located on the same key as the
present one, wait until the cursor appears (or scroll
right to end the time-out period), and enter the
letter.
108
To insert a space, press 0. To move the cursor to the
next line, press 0 three times.
Predictive text input
With predictive input, you can enter any letter with
a single keypress. Predictive text input is based on
a built-in dictionary to which you can add new
words.
1. To turn predictive text input on for all editors in
the device, quickly press # twice. To turn
predictive text input on or off in the general
settings, press
, and select Tools >
Settings > General > Personalisation >
Language > Predictive text.
2. To write the desired word, press the keys 2–9.
Press each key only once for one letter. For
example, to write "Nokia" when the English
dictionary is selected, press 6 for N, 6 for o, 5 for
k, 4 for i, and 2 for a.
The word suggestion changes after each
keypress.
3. When you finish writing the word correctly,
scroll right to confirm it, or press 0 to add a
space.
If the word is not correct, press * repeatedly to
view the matching words the dictionary has
found one by one.
If the ? character is shown after the word, the
word is not in the dictionary. To add a word to
the dictionary, select Spell, enter the word using
traditional text input, and select OK. The word is
4. Start writing the next word.
Tips on text input
To insert a number in the letter mode, press and
hold the desired number key.
To switch between the different character modes,
press #.
To delete a character, press C. To delete more than
one character, press and hold C.
The most common punctuation marks are available
under 1. To scroll them through one by one, if you
use traditional text input, press 1 repeatedly. If you
use predictive text input, press 1, and then *
repeatedly.
To open a list of special characters, press and hold
*.
Tip: To select several special characters from
the special characters list, press 5 after each
highlighted character.
Change the writing language
When you are writing text, you can change the
writing language. For example, if you are writing
text using a non-Latin alphabet and want to write
Latin characters, such as e-mail or web addresses,
you may need to change the writing language.
To change the writing language, select Options >
Writing language and a writing language that
uses Latin characters.
After changing the writing language, for example,
if you press 6 repeatedly to reach a specific
character, changing the writing language gives you
access to characters in a different order.
Messaging
added to the dictionary. When the dictionary is
full, a new word replaces the oldest added word.
Edit text and lists
To copy and paste text, while pressing and holding
#, scroll left or right to highlight text. To copy the
text to the clipboard, while still holding #, select
Copy. To insert the text into a document, press and
hold #, and select Paste.
To mark an item in a list, scroll to it, and press #.
To mark multiple items in a list, press and hold #
while you scroll up or down. To end the selection,
stop scrolling, and release #.
Write and send messages
Press
, and select Messaging.
Before you can create a multimedia message or
write an e-mail, you must have the correct
109
Messaging
connection settings in place. See "Define the e-mail
settings", p. 112.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit,
the device may make it smaller so that it can be sent
by MMS.
Check the size limit of e-mail messages with your
service provider. If you attempt to send an e-mail
message that exceeds the size limit of the e-mail
server, the message is left in the Outbox folder, and
the device attempts to resend it periodically.
Sending an e-mail requires a data connection, and
continuous attemps to resend the e-mail may
increase your phone bill. In the Outbox folder, you
can delete such a message or move it to the
Drafts folder.
1. Select New message > Text message to send
a text message, Multimedia message to send a
multimedia message (MMS), Audio message to
send an audio message (a multimedia message
that includes one sound clip), or E-mail to send
an e-mail.
2. In the To field, press the
scroll key to select
recipients or groups
from contacts, or enter
the recipient’s phone
number or e-mail
address. To add a
semicolon (;) that
separates the
recipients, press *. You
can also copy and paste
the number or address
from the clipboard.
3. In the Subject field, enter the subject of the
multimedia message or e-mail. To change the
fields that are visible, select Options > Address
fields.
4. In the message field, write the message. To
insert a template, select Options > Insert or
Insert object > Template.
5. To add a media object to a multimedia message,
select Options > Insert object > Image,
Sound clip, or Video clip.
6. To take a new picture or record sound or video
for a multimedia message, select Insert new >
Image, Sound clip, or Video clip.
110
To insert a new slide to the message, select
Slide.
Tip: You can combine images, video, sound,
and text to a presentation and send it in a
multimedia message. Start to create a
multimedia message, and select Options >
Create presentation. The option is shown
only if MMS creation mode is set to Guided
or Free. See "Multimedia message
settings", p. 115.
7. To add an attachment to an e-mail, select
Options > Insert > Image, Sound clip, Video
clip, Note, or Other for other file types. E-mail
attachments are indicated by .
8. To send the message, select Options > Send,
or press the call key.
Note: Your device may indicate that your
message was sent to the message center number
programmed into your device. Your device may not
indicate whether the message is received at the
intended destination. For more details about
messaging services, contact your service provider.
Your device supports the sending of text messages
beyond the character limit for a single message.
Longer messages are sent as a series of two or more
messages. Your service provider may charge
accordingly. Characters that use accents or other
marks, and characters from some language options,
take up more space, limiting the number of
characters that can be sent in a single message.
You may not be able to send video clips that are
saved in the .mp4 format or that exceed the size
limit of the wireless network in a multimedia
message.
Messaging
To see what the multimedia message looks like,
select Options > Preview.
Messaging inbox
Receive messages
Press
, and select Messaging > Inbox.
In the Inbox folder, indicates an unread text
an
message, an unread multimedia message,
data received
unread audio message, and
through Bluetooth connectivity.
When you receive a message,
and 1 new
message are shown in the standby mode. To open
the message, select Show. To open a message in
Inbox, scroll to it, and press the scroll key. To reply
to a received message, select Options > Reply.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may
111
Messaging
contain malicious software or otherwise be harmful
to your device or PC.
To save the data from the message, select
Options and the corresponding option.
When you open a multimedia message ( ), you
is shown if
may see an image and a message.
if video is included. To play
sound is included, or
the sound or the video, select the indicator.
Mailbox
You may receive a notification that a multimedia
message is waiting in the multimedia message
centre. To start a packet data connection to retrieve
the message to your device, select Options >
Retrieve.
To see the media objects that have been included
in the multimedia message, select Options >
Objects.
If the message includes a multimedia presentation,
is displayed. To play the presentation, select the
indicator.
Data, settings, and web service
messages
112
Your device can receive many kinds of messages
that contain data, such as business cards, ringing
tones, operator logos, calendar entries, and e-mail
notifications. You may also receive settings from
your service provider or company information
management department in a configuration
message.
Web service messages are notifications (for
example, news headlines) and may contain a text
message or a link. For availability and subscription,
contact your service provider.
Define the e-mail settings
Tip: Use Settings wizard to define your
mailbox settings. Press
, and select
Tools > Utilities > Sett. wizard.
To use e-mail, you must have a valid internet access
point (IAP) in the device and define your e-mail
settings correctly. See "Access points", p. 155. See
"E-mail settings", p. 116.
You must have a separate e-mail account. Follow
the instructions given by your remote mailbox and
internet service provider (ISP).
If you select Mailbox in the Messaging main view
and have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
When you create a new mailbox, the name you give
to the mailbox replaces Mailbox in the Messaging
main view. You can have up to six mailboxes.
Press
, and select Messaging and a mailbox.
When you open the mailbox, the device asks if you
want to connect to the mailbox (Connect to
mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected
to a remote mailbox using a data connection.
To view previously retrieved e-mail messages
offline, select No.
To create a new e-mail message, select New
message > E-mail in the Messaging main view or
Options > Create message > E-mail in your
mailbox. See "Write and send messages", p. 109.
Retrieve e-mail messages
Press
, and select Messaging and a mailbox.
If you are offline, select Options > Connect to start
a connection to the remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or
PC.
1. When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail >
New to retrieve all new messages, Selected to
retrieve only the messages that have been
marked, or All to retrieve all messages from the
mailbox.
Messaging
Open the mailbox
To stop retrieving messages, select Cancel.
2. To close the connection and view the e-mail
messages offline, select Options >
Disconnect.
3. To open an e-mail message, press the scroll key.
If the e-mail message has not been retrieved and
you are offline, you are asked if you want to
retrieve this message from the mailbox.
To view e-mail attachments, open the message, and
select the attachment field indicated by . If the
attachment has a dimmed indicator, it has not been
retrieved to the device; select Options >
Retrieve.
To retrieve e-mail messages automatically, select
Options > E-mail settings > Automatic
retrieval. See "Automatic retrieval
settings", p. 118.
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
113
Messaging
Delete e-mail messages
Press
, and select Messaging and a mailbox.
To delete the contents of an e-mail message from
the device while still retaining it in the remote
mailbox, select Options > Delete. In Delete
message from:, select Phone only.
The device mirrors the e-mail headings in the
remote mailbox. Although you delete the message
content, the e-mail heading stays in your device. If
you want to remove the heading as well, you must
first delete the e-mail message from your remote
mailbox, then make a connection from your device
to the remote mailbox again to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete > Phone and
server.
To cancel deleting an e-mail from the device and
server, scroll to an e-mail that has been marked to
be deleted during the next connection , and
select Options > Restore.
Disconnect from the mailbox
When you are online, to end the data connection to
the remote mailbox, select Options >
Disconnect.
114
View messages on a SIM card
Press
, and select Messaging.
Before you can view SIM messages, you must copy
them to a folder in your device.
1. In the Messaging main view, select Options >
SIM messages.
2. Select Options > Mark/Unmark > Mark or
Mark all to mark messages.
3. Select Options > Copy. A list of folders opens.
4. To start copying, select a folder and OK. To view
the messages, open the folder.
Messaging settings
The settings may be preconfigured in your device,
or you may receive them in a message. To enter
settings manually, fill in all fields marked with Must
be defined or an asterisk.
Some or all message centres or access points may
be preset for your device by your service provider,
and you may not be able to change, create, edit, or
remove them.
Text message settings
Press
, and select Messaging > Options >
Settings > Text message.
● Message centres — View a list of all text
message centres that have been defined.
● Message centre in use — Select which message
centre to use to deliver text messages.
● Character encoding — To use character
conversion to another encoding system when
available, select Reduced support.
● Receive report — Select whether the network
sends delivery reports on your messages
(network service).
● Message validity — Select how long the
message centre resends your message if the first
attempt fails (network service). If the message
cannot be sent within the validity period, the
message is deleted from the message centre.
● Message sent as — Contact your service
provider to learn if your message centre is able
to convert text messages into these other
formats.
● Preferred connection — Select the connection
to use.
● Reply via same centre — Select whether you
want the reply message to be sent using the
same text message centre number (network
service).
Multimedia message settings
Press
, and select Messaging > Options >
Settings > Multimedia message.
Select from the following:
● Image size — Define the size of the image in a
multimedia message.
● MMS creation mode — If you select Guided, the
device informs you if you try to send a message
that may not be supported by the recipient. If you
select Restricted, the device prevents you from
sending messages that may not be supported. To
include content in your messages without
notifications, select Free.
● Access point in use — Select which access point
is used as the preferred connection.
● Multimedia retrieval — Select how you want
to receive messages. To receive messages
automatically in your home cellular network,
select Auto in home netw.. Outside your home
cellular network, you receive a notification that
there is a message to retrieve in the multimedia
message centre.
Messaging
Select from the following:
Outside your home cellular network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrieval > Always
automatic, your device automatically makes an
active packet data connection to retrieve the
115
Messaging
message both in and outside your home cellular
network.
● Allow anon. msgs. — Select whether you want
to reject messages from an anonymous sender.
● Receive adverts — Define whether you want to
receive multimedia message advertisements.
● Receive report — Select whether you want the
status of the sent message to be shown in the log
(network service).
● Deny report sending — Select whether you
want to deny your device sending delivery
reports of received messages.
● Message validity — Select how long the
message centre resends your message if the first
attempt fails (network service). If the message
cannot be sent within the validity period, the
message is deleted from the message centre.
E-mail settings
Manage mailboxes
Press
, and select Messaging > Options >
Settings > E-mail.
To select which mailbox you want to use to send email, select Mailbox in use and a mailbox.
116
To remove a mailbox and its messages from your
device, select Mailboxes, scroll to the desired
mailbox, and press C.
To create a new mailbox, in Mailboxes, select
Options > New mailbox. The name you give to
the new mailbox replaces Mailbox in the Messaging
main view. You can have up to six mailboxes.
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval
settings, and automatic retrieval settings.
Connection settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Connection settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
● User name — Enter your user name given to you
by your service provider.
● Password — Enter your password. If you leave
this field blank, you are prompted for the
password when you try to connect to your
remote mailbox.
● Incoming mail server — Enter the IP address
or host name of the mail server that receives your
e-mail.
● Access point in use — Select an internet access
point (IAP). See "Access points", p. 155.
● Mailbox name — Enter a name for the mailbox.
● Mailbox type — Defines the e-mail protocol that
your remote mailbox service provider
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
● My e-mail address — Enter the e-mail address
given to you by your service provider.
● Outgoing mail server — Enter the IP address or
host name of the mail server that sends your email. You may only be able to use the outgoing
server of your service provider. Contact your
service provider for more information.
The settings for User name, Password, Access
point in use, Security (ports), and Port are similar
to the ones in Incoming e-mail.
User settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
User settings.
Select from the following:
● My name — Enter your own name. Your name
replaces your e-mail address in the recipient’s
device when the recipient’s device supports this
function.
● Send message — Define how e-mail is sent from
your device. Select Immediately for the device
to connect to the mailbox when you select Send
message. If you select During next conn., email is sent when the connection to the remote
mailbox is available.
● Send copy to self — Select whether you want
to send a copy of the e-mail to your own mailbox.
● Include signature — Select whether you want
to attach a signature to your e-mail messages.
● New e-mail alerts — Select whether you want
to receive the new e-mail indications (a tone, a
note, and a mail indicator) when new mail is
received.
Messaging
recommends. The options are POP3 and IMAP4.
This setting cannot be changed.
● Security (ports) — Select the security option
used to secure the connection to the remote
mailbox.
● Port — Define a port for the connection.
● APOP secure login (for POP3 only) — Use with
the POP3 protocol to encrypt the sending of
passwords to the remote e-mail server while
connecting to the mailbox.
Retrieval settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Retrieval settings.
Select from the following:
● E-mail to retrieve — Define which parts of the
e-mail are retrieved: Headers only, Size limit
(POP3), or Msgs. & attachs. (POP3).
● Retrieval amount — Define how many new email messages are retrieved to the mailbox.
117
Messaging
● IMAP4 folder path (for IMAP4 only) — Define
the folder path for folders to be subscribed.
● Folder subscriptions (for IMAP4 only)
— Subscribe to other folders in the remote
mailbox, and retrieve content from those folders.
Automatic retrieval settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Automatic retrieval.
Select from the following:
● E-mail notifications — To automatically
retrieve the headings to your device when you
receive new e-mail in your remote mailbox,
select Auto-update or Only in home netw..
● E-mail retrieval — To automatically retrieve the
headings of new e-mail messages from your
remote mailbox at defined times, select
Enabled or Only in home netw.. Define when
and how often the messages are retrieved.
E-mail notifications and E-mail retrieval cannot
be active at the same time.
118
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
Web service message settings
Press
, and select Messaging > Options >
Settings > Service message.
Select whether you want to receive service
messages. If you want to set the device to
automatically activate the browser and start a
network connection to retrieve content when you
receive a service message, select Download
messages > Automatically.
Cell broadcast settings
Check the available topics and related topic
numbers with your service provider.
Press
, and select Messaging > Options >
Settings > Cell broadcast.
Select from the following:
● Reception — Select whether you want to
receive cell broadcast messages.
● Language — Select the languages in which you
want to receive messages: All, Selected, or
Other.
● Topic detection — Select whether the device
automatically searches for new topic numbers,
and saves the new numbers without a name to
the topic list.
Press
, and select Messaging > Options >
Settings > Other.
Select from the following:
● Save sent messages — Select whether you
want to save a copy of the text messages,
multimedia messages, or e-mail that you send to
the Sent folder.
● Number of saved msgs. — Define how many
sent messages are saved to the sent folder at a
time. When the limit is reached, the oldest
message is deleted.
● Memory in use — Select the memory where you
want to save your messages.
Messaging
Other settings
119
Make calls
Make calls
Voice calls
1. In the standby mode, enter the phone number,
including the area code. To remove a number,
press C.
For international calls, press * twice for the +
character (replaces the international access
code), and enter the country code, area code
(omit the leading zero if necessary), and phone
number.
2. Press the call key to call the number.
3. Press the end key to end the call (or to cancel the
call attempt).
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, press
, and select
Contacts. Scroll to the desired name, or enter the
first letters of the name to the search field. Matching
contacts are listed. To call, press the call key. If you
have saved several numbers for a contact, select the
desired number from the list.
120
Options during a call
To adjust the volume during a call, use the volume
key on the side of your device. You can also use the
scroll key. If you have set the volume to Mute, select
Unmute first.
To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options > Send MMS (in UMTS networks only). You
can edit the message and change the recipient
before sending. Press the call key to send the file to
a compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select Options > Hold. To
switch between the active and the held call, select
Options > Swap.
To send DTMF tone strings (for example, a
password), select Options > Send DTMF. Enter the
DTMF string or search for it in Contacts. To enter a
wait character (w) or a pause character (p), press *
repeatedly. To send the tone, select OK. You can add
DTMF tones to the phone number or DTMF fields in
a contact card.
During an active call, to route the sound from the
handset to the loudspeaker, select Options >
Activate loudspeaker. If you have attached a
compatible headset with Bluetooth connectivity, to
route the sound to the headset, select Options >
Activate handsfree. To switch back to the handset,
select Options > Activate handset.
Answer or decline a call
To answer the call, press the call key.
To mute the ringing tone of an incoming call, select
Silence.
If you do not want to answer a call, press the end
key. If you activate the Call divert > Voice calls >
If busy function in phone settings to divert calls,
declining an incoming call also diverts the call.
Many of the options that you can use during a voice
call are network services.
When you select Silence to mute the ringing tone
of an incoming call, you can send a text message
without rejecting the call, informing the caller that
you cannot answer the call. Select Options > Send
text message. To set up this option and write a
standard text message, select Tools > Settings >
Phone > Call > Reject call with SMS.
Voice and video mailboxes
Make a conference call
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all,
select Options > End all calls.
To call your voice or video mailbox (network
services, video mailbox available only in the UMTS
network), press and hold 1 in the standby mode,
and select Voice mailbox or Video mailbox.
To change the phone number of your voice or video
mailbox, press
, and select Tools > Utilities >
Call mailbox, a mailbox, and Options > Change
number. Enter the number (obtained from your
network service provider), and select OK.
Make calls
Tip: When you have only one active voice call,
to put the call on hold, press the call key. To
activate the call, press the call key again.
1. Make a call to the first participant.
2. To make a call to another participant, select
Options > New call. The first call is
automatically put on hold.
3. When the new call is answered, to join the first
participant in the conference call, select
Options > Conference.
121
Make calls
To add a new person to the call, repeat step 2,
and select Options > Conference > Add to
conference. Your device supports conference
calls between a maximum of six participants,
including yourself.
To have a private conversation with one of the
participants, select Options > Conference >
Private. Select a participant, and select
Private. The conference call is put on hold on
your device. The other participants can still
continue the conference call. After you finish the
private conversation, select Options >
Conference to return to the conference call.
To drop a participant, select Options >
Conference > Drop participant, scroll to the
participant, and select Drop.
4. To end the active conference call, press the end
key.
Speed dial a phone number
To activate the feature, press
, and select
Tools > Settings > Phone > Call > Speed
dialling.
122
To assign a phone number to one of the number
keys (2-9), press
, and select Tools > Utilities >
Speed dial. Scroll to the key to which you want to
assign the phone number, and select Options >
Assign. 1 is reserved for the voice or video mailbox,
and for starting the web browser.
To call in the standby mode, press the assigned key
and the call key.
Call waiting
You can answer a call while you have another call in
progress if you have activated call waiting in
Settings > Phone > Call > Call waiting
(network service).
To answer the waiting call, press the call key. The
first call is put on hold.
To switch between the two calls, select Swap. To
connect an incoming call or a call on hold with an
active call and to disconnect yourself from the calls,
select Options > Transfer. To end the active call,
press the end key. To end both calls, select
Options > End all calls.
Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on
the speaker’s voice, so the user does not record
voice tags in advance. Instead, the device creates a
voice tag for the entries in contacts, and compares
the spoken voice tag to it. The voice recognition in
The voice tag for a contact is the name or nickname
that is saved on the contact card. To listen to the
synthesised voice tag, open a contact card, and
select Options > Play voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a
noisy environment or during an emergency, so you
should not rely solely upon voice dialing in all
circumstances.
When you use voice dialling, the loudspeaker is in
use. Hold the device at a short distance away when
you say the voice tag.
1. To start voice dialling, in the standby mode,
press and hold the right selection key. If a
compatible headset with the headset key is
attached, press and hold the headset key to start
voice dialling.
2. A short tone is played, and Speak now is
displayed. Say clearly the name or nickname that
is saved on the contact card.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device
language, and displays the name and number.
After a timeout of 2.5 seconds, the device dials
the number. If the recognised contact was not
correct, select Next to view a list of other
matches or Quit to cancel voice dialling.
If several numbers are saved under the name, the
device selects the default number if it has been set.
Otherwise the device selects the first available
number in a contact card.
Make calls
the device adapts to the main user’s voice to
recognise the voice commands better.
Make a video call
When you make a video call (network service), you
can see a real-time, two-way video between you
and the recipient of the call. The live video image,
or video image captured by the camera in your
device is shown to the video call recipient.
To be able to make a video call, you must have a
USIM card and be in the coverage of a UMTS network.
For availability of and subscription to video call
services, contact your network service provider.
A video call can only be made between two parties.
The video call can be made to a compatible mobile
device or an ISDN client. Video calls cannot be made
while another voice, video, or data call is active.
Icons
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your
device. To send a still image instead, select Tools >
123
Make calls
Settings > Phone > Call > Image in video
call.
Options during a video call
1. To start a video call, enter the phone number in
the standby mode, or select Contacts and a
contact.
To zoom your image in or out, scroll up or down.
Even if you denied video sending during a video call,
the call is still charged as a video call. Check the
pricing with your service provider.
To change between showing video or hearing only
sound, select Options > Enable, or Disable and
the desired option.
2. Select Options > Call > Video call.
To route the audio to a compatible headset with
Bluetooth connectivity attached to your device,
select Options > Activate handsfree. To route the
audio back to the loudspeaker of your device, select
Options > Activate handset.
The secondary camera on the front is used by
default for video calls. Starting a video call may
take a while. Waiting for video image is
shown. If the call is not successful (for example,
video calls are not supported by the network, or
the receiving device is not compatible), you are
asked if you want to try a normal call or send a
text or multimedia message instead.
The video call is active when you see two video
images, and hear the sound through the
loudspeaker. The call recipient may deny video
sending ( ), in which case you only hear the
sound and may see a still image or a grey
background graphic.
3. To end the video call, press the end key.
124
To adjust the volume during a video call, use the
volume key on the side of the device.
To use the main camera to send video, select
Options > Use main camera. To switch back to
the secondary camera, select Options > Use
secondary camera.
Answer or decline a video
call
When a video call arrives,
is displayed.
To answer the video call, press the call key. Allow
video image to be sent to caller? is displayed. To
start sending live video image, select Yes.
If you do not activate the video call, video sending
is not activated, and you only hear the sound of the
To end the video call, press the end key.
Video sharing
Use video sharing (network service) to send live
video or a video clip from your mobile device to
another compatible mobile device during a voice
call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker
for the voice call while you share video, you can also
use a compatible headset.
Requirements
Video sharing requires a UMTS connection. Your
ability to use video sharing depends on the
availability of the UMTS network. Contact your
service provider for more information on the service
and network availability and fees associated with
using this service.
To use video sharing you must do the following:
● Ensure that your device is set up for person-toperson connections.
● Ensure you have an active UMTS connection and
are within UMTS network coverage. If you start
the sharing session while you are within UMTS
network coverage and a hand over to GSM occurs,
the sharing session is discontinued, but your
voice call continues. You cannot start video
sharing if you are not within UMTS network
coverage.
Make calls
caller. A grey screen replaces the video image. To
replace the grey screen with a still image captured
by the camera in your device, select Tools >
Settings > Phone > Call > Image in video
call.
● Ensure that both the sender and recipient are
registered to the UMTS network. If you invite
someone to a sharing session and the recipient’s
device is not within UMTS network coverage,
does not have video sharing installed, or personto-person connections set up, the recipient does
not know that you are sending an invitation. You
receive an error message that indicates that the
recipient cannot accept the invitation.
Settings
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them
in your device. Your service provider may send you
125
Make calls
the settings over the air or give you a list of the
needed parameters.
To add a SIP address to a contact card, do the
following:
1. Press
, and select Contacts.
2. Open the contact card (or start a new card for
that person).
3. Select Options > Add detail or Share view.
4. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the
contact, you can use the phone number of the
recipient, including the country code, to share
video (if supported by the network service
provider).
UMTS connection settings
To set up your UMTS connection, do the following:
● Contact your service provider to establish an
agreement for you to use the UMTS network.
● Ensure that your device UMTS access point
connection settings are configured properly.
Share live video or video clips
126
1. When a voice call is active, select Options >
Share video > Live video.
To share a video clip, select Options > Share
video > Recorded clip. A list of video clips
saved on the device memory or compatible
memory card opens. Select a clip you want to
share. To preview the clip, select Options >
Play.
2. If you share live video, your device sends the
invitation to the SIP address you have added to
the contact card of the recipient.
If you share a video clip, select Options >
Invite. You may need to convert the video clip
into a suitable format to be able to share it. Clip
must be converted for sharing. Continue?
appears. Select OK.
If the contact information of the recipient is
saved in Contacts, and the contact has several SIP
addresses or phone numbers including the
country code, select the desired address or
number. If the SIP address or phone number of
the recipient is not available, enter the SIP
address or the phone number of the recipient
including the country code, and select OK to
send the invitation.
3. Sharing begins automatically when the recipient
accepts the invitation.
4. To pause the sharing session, select Pause. To
resume sharing, select Continue. To fast
forward or rewind the video clip, scroll up or
down. To play the clip again, press the end key.
To save the live video you shared, select Save to
accept the Save shared video clip? query. The
shared video is saved in the Images & videos folder
in Gallery.
If you access other applications while you are
sharing a video clip, the sharing is paused. To return
to the video sharing view and continue sharing, in
the active standby mode, select Options >
Continue.
Accept an invitation
When someone sends you a video sharing
invitation, the invitation message displays the
sender’s name or SIP address. If your device is not
set to silent, it rings when you receive an invitation.
If someone sends you a share invitation and you are
not within UMTS network coverage, you will not
know that you received an invitation.
When you receive an invitation, select from the
following:
● Accept — Activates the sharing session.
● Reject — Declines the invitation. The sender
receives a message that you rejected the
invitation. You can also press the end key to
decline the sharing session and disconnect the
voice call.
When you receive a video clip, to mute the sound of
the clip, select Mute.
To end video sharing, select Stop. Video sharing
also ends if the active voice call ends.
Make calls
5. To end the sharing session, select Stop. To end
the voice call, press the end key. Video sharing
also ends if the active voice call ends.
Internet calls
With the internet call service (network service), you
can make and receive calls over the internet.
Internet calls can be established between
computers, between mobile phones, and between
a VoIP device and a traditional telephone. To make
or receive an internet call, your device must be
connected to an internet call service.
To connect to an internet call service, your device
must be in the coverage of a connection network,
such as a WLAN access point.
Your device supports voice calls over the internet
(net calls). Your device attempts emergency calls
primarily over cellular networks. If an emergency
call using cellular networks is not successful, your
device attempts an emergency call through your net
call provider. Due to the established nature of
cellular telephony, you should use cellular networks
for emergency calls, if possible. If you have cellular
network coverage available, make sure that your
127
Make calls
cellular phone is switched on and ready to make
calls before you attempt an emergency call. The
capability for an emergency call using internet
telephony depends on the availability of a WLAN
network and your net call provider's
implementation of emergency call capabilities.
Contact your net call provider to check the internet
telephony emergency call capability.
To log in to the internet call service manually, select
Registration > When needed, and Transport
type > UDP or TCP in the SIP settings when
creating an internet call profile.
Create an internet call profile
Connect to the internet call
service
1. Press
, select Tools > Settings >
Connection > SIP settings > Options > New
SIP profile, and enter the required information.
Ensure that Registration is set to Always on.
Contact your internet call provider for the correct
settings.
When you are connected to an internet call service,
is shown in the standby mode.
Before you can make internet calls, you must create
an internet call profile.
2. Select Proxy server > Transport type >
Auto.
3. Select Back until you return to the main view of
connection settings.
4. Select Internet tel. > Options > New
profile. Enter a name for the profile, and select
the SIP profile you just created.
128
select Tools > Connectivity > Internet tel. >
Preferred profile.
To use the created profile for connecting to the
internet call service automatically, press
, and
To make or receive an internet call, your device must
be connected to an internet call service. If you have
selected automatic login, your device automatically
connects to the internet call service. If you log in to
the service manually, select an available network
from the list and Select.
The list of networks is refreshed automatically every
15 seconds. To refresh the list manually, select
Options > Refresh. Use this option if your WLAN
access point is not shown.
To select an internet call service for outgoing calls
if the device is connected to more than one service,
select Options > Change service.
To configure new services, select Options >
Configure service. This option is shown only if
there are services that have not been configured.
To connect to an internet call service using a hidden
WLAN, select Options > Use hidden network.
To end the connection to an internet call service,
select Options > Disconnect from serv..
Make internet calls
When you have activated the internet call feature,
you can make an internet call from all applications
where you can make a regular voice call. For
example, in Contacts, scroll to the desired contact,
and select Call > Options > Internet call.
To make an internet call in the standby mode, enter
the phone number or internet address, and press
the call key.
To make an internet call to an address that does not
start with a digit, press any number key when the
device is in the standby mode, then press # for a
few seconds to clear the display and to switch the
device from the number mode to the letter mode.
Enter the address, and press the call key.
To make an internet call from Contacts, press
,
select Contacts, scroll to the desired contact, and
select Options > Internet call.
To make an internet call from the log, press
,
select Tools > Log and the log type, scroll to the
desired contact, and select Options > Internet
call.
Service settings
Make calls
To save the network to which you are currently
connected, select Options > Save network. The
saved networks are marked with a star in the list of
networks.
Press
, select Tools > Connectivity > Internet
tel. > Options > Settings, and select the default
settings or service-specific settings.
To set internet call as the preferred call type for all
outgoing calls, select Default call type > Internet
call. When your device is connected to an internet
call service, all calls are made as internet calls.
To log in automatically to the internet call service,
select Login type > Automatic. If you use the
automatic login type for WLANs, the device
periodically scans for WLANs, which increases the
demand on battery power and reduces the battery
life.
To log in manually to the internet call service, select
Login type > Manual.
To view the networks you have saved for the
internet call service and the networks detected by
the internet call service, select Saved conn.
networks.
To define the service-specific settings, select Edit
service settings. This option is only available if a
129
Make calls
service-specific software plug-in has been installed
in the device.
To monitor the approximate duration of your
incoming and outgoing calls, select Call duration.
Log
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and so
forth.
The log stores information about the
communication history of the device. The device
registers missed and received calls only if the
network supports these functions, the device is
switched on, and within the network service area.
Recent calls
Press
, and select Tools > Log.
To monitor the phone numbers of missed, received,
and dialled voice calls, select Recent calls. The
device registers missed and received calls only if the
network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select Options > Clear
recent calls in the recent calls main view. To clear
one of the call registers, open the register you want
to erase, and select Options > Clear list. To clear
an individual event, open a register, scroll to the
event, and press C.
130
Call duration
Press
, and select Tools > Log.
To clear call duration timers, select Options >
Clear timers. For this you need the lock code.
Packet data
Press
, and select Tools > Log.
To check the amount of data sent and received
during packet data connections, select Packet
data. For example, you may be charged for your
packet data connections by the amount of data sent
and received.
Monitor all communication
events
Press
calls.
, and select Tools > Log > Recent
Icons in the log are as follows:
Incoming
Outgoing
Missed communication events
outgoing event indicated by Pack., and select
Options > View details.
Make calls
To open the general log where you can monitor all
voice calls, text messages, or data and WLAN
connections registered by the device, scroll right.
Subevents, such as a text message sent in more than
one part and packet data connections, are logged
as one communication event. Connections to your
mailbox, multimedia messaging centre, or web
pages are shown as packet data connections.
To add an unknown phone number from the log to
your contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls
register, and messaging delivery reports
permanently, select Options > Clear log. Select
Yes to confirm. To remove a single event from one
of the recent calls logs, press C.
To set the log duration, select Options >
Settings > Log duration. If you select No log, all
the log contents, recent calls register, and
messaging delivery reports are permanently
deleted.
Tip: In the details view, you can copy a phone
number to the clipboard, and paste it into a
text message, for example. Select Options >
Copy number.
To view from the packet data counter how much
data is transferred and how long a certain packet
data connection lasts, scroll to an incoming or
131
Contacts (phonebook)
Contacts (phonebook)
In Contacts, you can save and update contact
information, such as phone numbers, home
addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail
image to a contact card. You can also create contact
groups, which allow you to send text messages or
e-mail to many recipients at the same time.
Save and edit names and
numbers
1. Press
, and select Contacts > Options >
New contact.
2. Fill in the fields that you want, and select Done.
To edit contact cards, scroll to the contact card you
want to edit, and select Options > Edit. You can
also search for the desired contact by entering the
first letters of the name to the search field. A list of
the contacts starting with the letters appear on the
display.
132
Tip: To add and edit contact cards, you can
also use Nokia Contacts Editor available in
Nokia Nseries PC Suite.
To attach a small thumbnail image to a contact card,
open the contact card, and select Options > Edit >
Options > Add thumbnail. The thumbnail image
is shown when the contact calls.
Manage names and numbers
To add a contact to a group, select Options > Add
to group (shown only if you have created a group).
To check to which groups a contact belongs, select
the contact and Options > Belongs to groups.
To delete a contact card, select a card, and press C.
To delete several contact cards at the same time,
select Options > Mark/Unmark to mark the
desired contact cards, and press C to delete.
To send contact information, select the card you
want to send, Options > Send, and the desired
option.
To listen to the voice tag assigned to the contact,
select a contact card and Options > Play voice
tag.
1. Press the scroll key to open a contact card or go
to the groups list, and select a contact group.
You can assign default numbers or addresses to a
contact card. In this way if a contact has several
numbers or addresses, you can easily call or send a
message to the contact to a certain number or
address. The default number is also used in voice
dialling.
3. Select the ringing tone you want to use for the
individual contact or the members of the
selected group.
2. Select Options > Defaults.
To remove the ringing tone, select Default tone
from the list of ringing tones.
Press
, and select Contacts.
1. In the contacts list, select a contact.
3. Select a default to which you want to add a
number or an address, and select Assign.
4. Select a number or an address you want to set
as a default.
The default number or address is underlined in the
contact card.
Add ringing tones for
contacts
Press
, and select Contacts.
To define a ringing tone for a contact or a contact
group, do the following:
2. Select Options > Ringing tone. A list of ringing
tones opens.
When a contact or group member calls you, the
device plays the chosen ringing tone (if the caller’s
telephone number is sent with the call and your
device recognises it).
Contacts (phonebook)
Default numbers and
addresses
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options >
SIM contacts > SIM directory, the names you
want to copy, and Options > Copy to Contacts.
To copy contacts to your SIM card, in Contacts, select
the names you want to copy and Options > Copy
to SIM directory, or Options > Copy > To SIM
directory. Only the contact card fields supported by
your SIM card are copied.
133
Contacts (phonebook)
SIM directory and other SIM
services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be
the service provider or other vendor.
To see the names and numbers stored on the SIM
card, select Options > SIM contacts > SIM
directory. In the SIM directory you can add, edit, or
copy numbers to contacts, and you can make calls.
To view the list of fixed dialling numbers, select
Options > SIM contacts > Fixed dial contacts.
This setting is only shown if supported by your SIM
card.
To restrict calls from your device to selected phone
numbers, select Options > Activate fixed
dialling. You need your PIN2 code to activate and
deactivate fixed dialling or edit your fixed dialling
contacts. Contact your service provider if you do not
have the code. To add new numbers to the fixed
dialling list, select Options > New SIM contact.
You need the PIN2 code for these functions.
134
When you use fixed dialling, packet data
connections are not possible, except when sending
text messages over a packet data connection. In this
case, the message centre number and the
recipient’s phone number must be included on the
fixed dialling list.
When fixed dialling is activated, calls may be
possible to the official emergency number
programmed into your device.
Manage contact groups
Create contact groups
1. In Contacts, scroll right to open the groups list.
2. Select Options > New group.
3. Write a name for the group or use the default
name, and select OK.
4. Select the group and Options > Add
members.
5. Scroll to a contact, and press the scroll key to
mark it. To add multiple members at a time,
repeat this action on all the contacts you want
to add.
6. To add the contacts to the group, select OK.
To rename a group, select Options > Rename,
enter the new name, and select OK.
Remove members from a group
1. In the groups list, select the group you want to
modify.
2. Scroll to the contact, and select Options >
Remove from group.
Contacts (phonebook)
3. To remove the contact from the group, select
Yes.
135
Office folder
Office folder
Quickoffice
With Quickoffice, you can view .doc, .xls, .ppt,
and .txt documents. All file formats or features are
not supported. Apple Macintosh is not supported.
To use the Quickoffice applications, press
, and
select Applications > Office > Quickoffice. A list
of available files in the .doc, .xls, .ppt, and .txt file
formats opens.
To open Quickword, Quicksheet, Quickpoint, or
Quickmanager, use the scroll key to scroll to the
tabs.
If you experience problems with Quickword,
Quicksheet, Quickpoint, or Quickmanager, visit
www.quickoffice.com for more information.
Support is also available by sending an e-mail to
supportS60@quickoffice.com.
Quickword
With Quickword, you can view native Microsoft
Word documents with your device.
136
Quickword supports the viewing of documents
saved in .doc and .txt formats created with Microsoft
Word 97, 2000, XP, and 2003. Not all variations or
features of the mentioned file formats are
supported.
To upgrade to a version of Quickword that supports
editing, when you have a file open, select
Options > Upgrade to edit. The upgrade is
chargeable.
Quicksheet
With Quicksheet, you can view native Microsoft
Excel files with your device.
Quicksheet supports the viewing of spreadsheet
files saved in .xls format created with Microsoft
Excel 97, 2000, XP, or 2003. Not all variations or
features of the mentioned file formats are
supported.
To upgrade to a version of Quicksheet that supports
editing, when you have a file open, select
Options > Upgrade to edit. The upgrade is
chargeable.
Quickpoint
With Quickpoint, you can view native Microsoft
PowerPoint presentations with your device.
To upgrade to a version of Quickpoint that supports
editing, when you have a file open, select
Options > Upgrade to edit. The upgrade is
chargeable.
Quickmanager
With Quickmanager, you can download software,
including updates, upgrades, and other useful
applications. You can pay for the downloads by
phone bill or credit card.
Notes
Press
Notes.
, and select Applications > Office >
To write a note, start entering the text. The note
editor opens automatically.
To open a note, scroll to it, and press the scroll key.
To send a note to other compatible devices, select
Options > Send.
To delete a note, press C.
Tip: To delete several notes, select Options >
Mark/Unmark and the notes, and press C.
To synchronise or to define synchronisation
settings for a note, select Options >
Synchronisation. Select Start to start
synchronisation or Settings to define the
synchronisation settings for the note.
Office folder
Quickpoint supports the viewing of presentations
saved in .ppt format created with Microsoft
PowerPoint 2000, XP, and 2003. Not all variations
or features of the mentioned file formats are
supported.
Adobe PDF reader
Press
, and select Applications > Office >
Adobe PDF.
With the PDF reader you can read PDF documents
on the display of your device; search for text in the
documents; modify settings, such as zoom level and
page views; and send PDF files using e-mail.
Converter
Press
, and select Applications > Office >
Converter.
With Converter, you can convert measures from one
unit to another.
The converter has limited accuracy, and rounding
errors may occur.
1. In the Type field, select the measure you want to
use.
137
Office folder
2. In first Unit field, select the unit from which you
want to convert.
Barcode reader
4. In the first Amount field, enter the value you
want to convert. The other Amount field changes
automatically to show the converted value.
Use the Barcode reader application to decode
different types of codes (such as codes in
magazines). The codes may contain information
such as URL links, e-mail addresses, and phone
numbers.
3. In the next Unit field, select the unit to which you
want to convert.
Set base currency and exchange rates
Select Type > Currency > Options > Currency
rates. Before you can make currency conversions,
you must select a base currency and add exchange
rates. The rate of the base currency is always 1.
Note: When you change base currency, you
must enter new exchange rates because all
previously set exchange rates are cleared.
Zip manager
Press
Zip.
138
, and select Applications > Office >
With Zip manager, you can create new archive files
to store compressed .zip files; add single or multiple
compressed files or directories to an archive; set,
clear, or change the archive password for protected
archives; and change settings, such as compression
level and file name encoding.
Press
, and select Applications > Office >
Barcode.
1. To scan a code, select Scan code.
2. Set the code to fit the display.
The application attempts to scan and decode the
code, and the decoded information appears on
the display.
When viewing the decoded information, the
different links, URL links, phone numbers, and email addresses are indicated by icons on the top
of the display in the direction they appear in the
decoded information.
3. To save the scanned data, select Options >
Save.
The data is saved in .bcr format in the Saved
data folder.
To select the memory where the information is
saved, select Options > Settings > Memory
in use.
The device reverts to the standby mode to save
battery power if the barcode reader cannot be
activated or if no keys are pressed for 1 minute.
Office folder
4. To use the decoded information, select
Options and the desired action.
139
Applications folder
Applications folder
Calculator
Press
, and select Applications > Calculator.
Note: This calculator has limited accuracy
and is designed for simple calculations.
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract
from the function map. Enter the second number of
the calculation, and select =.
The calculator performs operations in the order
they are entered. The result of the calculation
remains in the editor field and can be used as the
first number of a new calculation.
To save the results of a calculation, select Options >
Memory > Save. The saved result replaces the
previously stored result in the memory.
To retrieve the results of a calculation from the
memory and use them in a calculation, select
Options > Memory > Recall.
140
To view the last saved result, select Options > Last
result. Exiting the Calculator application or
switching off the device does not clear the memory.
You can recall the last saved result the next time you
open the Calculator application.
Application manager
With Application manager, you can see the software
packages installed in your device. You can view
details of installed applications, remove
applications, and define installation settings.
Press
, and select Applications > App. mgr..
You can install two types of applications and
software to your device:
● J2ME applications based on Java technology with
the extension .jad or .jar
● Other applications and software suitable for the
Symbian operating system with the
extension .sis or .sisx
Only install software specifically designed for your
device: Nokia N82. Software providers will often
refer to the official model number of this product:
Nokia N82-1.
Installation files may be transferred to your device
from a compatible computer, downloaded during
browsing, or sent to you in a multimedia message
as an e-mail attachment or using other connectivity
methods, such as Bluetooth connectivity. You can
use Nokia Application Installer in Nokia Nseries PC
Suite to install an application to your device. If you
use Microsoft Windows Explorer to transfer a file,
save the file to a compatible memory card (local
disk).
indicates a .sis or .sisx application, a Java
that the application is not fully
application,
that the application is installed on
installed, and
the memory card.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
Before installation, note the following:
● To view the application type, version number,
and the supplier or manufacturer of the
application, select Options > View details.
To display the security certificate details of the
application, in Details:, scroll to Certificates,
and select View details. See "Certificate
management", p. 150.
● If you install a file that contains an update or
repair to an existing application, you can only
restore the original application if you have the
original installation file or a full backup copy of
the removed software package. To restore the
original application, remove the application, and
install the application again from the original
installation file or the backup copy.
The .jar file is required for installing Java
applications. If it is missing, the device may ask
you to download it. If there is no access point
defined for the application, you are asked to
select one. When you are downloading the .jar
file, you may need to enter a user name and
password to access the server. You obtain these
from the supplier or manufacturer of the
application.
Applications folder
Install applications and software
To install an application or software, do the
following:
1. To locate an installation file, press
, and
select Applications > App. mgr.. Alternatively,
search the device memory or a compatible
memory card (if inserted) in File manager, or
open a message in Messaging > Inbox that
contains an installation file.
2. In Application manager, select Options >
Install. In other applications, scroll to the
installation file, and select it to start the
installation.
141
Applications folder
During installation, the device shows
information about the progress of the
installation. If you install an application without
a digital signature or certification, the device
displays a warning. Continue installation only if
you are sure of the origin and contents of the
application.
To start an installed application, locate it in the
menu, and select it. If the application does not have
a default folder defined, it is installed in the
Applications folder in the main menu.
To see which software packages are installed or
removed and when, select Options > View log.
Important: Your device can only support one
antivirus application. Having more than one
application with antivirus functionality could affect
performance and operation or cause the device to
stop functioning.
142
After you install applications to a compatible
memory card, installation files (.sis) remain in the
device memory. The files may use large amounts of
memory and prevent you from storing other files.
To maintain sufficient memory, use Nokia PC Suite
to back up installation files to a compatible PC, then
use the file manager to remove the installation files
from the device memory. If the .sis file is a message
attachment, delete the message from the
Messaging inbox.
See "File manager", p. 144.
Remove applications and
software
Press
, and select Applications > App. mgr..
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if
you have the original software package or a full
backup of the removed software package. If you
remove a software package, you may no longer be
able to open documents created with that software.
If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package
for details.
Settings
Press
, and select Applications > App. mgr..
Select Options > Settings and from the following:
● Software installation — Select whether
Symbian software that has no verified digital
signature can be installed.
● Online certificate check — Select to check the
online certificates before installing an
application.
Some Java applications may require that a message
be sent or a network connection be made to a
specific access point to download extra data or
components. In the Application manager main
view, scroll to an application, and select Options >
Open to change settings related to that specific
application.
Applications folder
● Default web address — Set the default address
used when checking online certificates.
143
Tools folder
Tools folder
File manager
To browse files and folders in the memory, press
, and select Tools > File mgr..
When you open File manager, the device memory
view (
) opens. Scroll right to open the memory
card view ( ), if available.
To see how much memory different data types use,
select Options > Memory details.
To find a file, select Options > Find and the
memory from which to search. Enter a search text
that matches the file name.
To mark files, select Options > Mark/Unmark >
Mark or Mark all. To move or copy the files, select
Options > Move to folder or Copy to folder.
Memory card tool
A compatible memory card may already be inserted
in your device.
144
Press
, and select Tools > Utilities >
Memory.
To see how much memory different data types use,
select Options > Memory details.
To back up information from the device memory to
a compatible memory card, select Options > Back
up phone memory. The device notifies you if there
is not enough free space to create a backup.
To restore information from the compatible
memory card to the device memory, select
Options > Restore from card.
When a memory card is reformatted, all data on the
card is permanently lost. Some memory cards are
supplied preformatted and others require
formatting; consult your retailer. The memory card
supplied with your device does not need to be
formatted.
To format a memory card, select Options >
Format memory card and Yes to confirm.
Voice commands
Press
, and select Tools > Utilities > Voice
comm..
You can use enhanced voice commands to control
your device. See "Voice dialling", p. 122.
To add more applications to the list, in the Voice
commands main view, select Options > New
application. To add a second voice command that
can be used to start the application, select
Options > Change command, and enter the new
voice command as text. Avoid very short names,
abbreviations, and acronyms.
To listen to the synthesised voice tag, select
Options > Playback.
To change voice command settings, select
Options > Settings. To switch off the synthesiser
that plays recognised voice tags and commands in
the selected device language, select Synthesiser >
Off. To reset voice recognition learning, for
example, when the main user of the device has
changed, select Remove voice adapts..
Sync
Press
, and select Tools > Sync.
Sync enables you to synchronise your notes,
calendar entries, text messages, or contacts with
various compatible applications on a compatible
computer or on the internet.
You may receive synchronisation settings in a
special message.
In the Sync main view, you can see the different
synchronisation profiles. A synchronisation profile
contains the necessary settings to synchronise data
in your device with a remote database on a server
or compatible device.
Tools folder
To activate enhanced voice commands to start
applications and profiles, you must open the Voice
commands application and its Profiles folder; the
device creates voice tags for the applications and
profiles. To use enhanced voice commands, press
and hold the right selection key in the standby
mode, and speak a voice command. The voice
command is the name of the application or profile
displayed in the list.
To synchronise data, select Options >
Synchronise. To cancel synchronisation before it
finishes, select Cancel.
Device manager
Press
mgr..
, and select Tools > Utilities > Device
Use Device manager to connect to a server and
receive configuration settings for your device, to
create new server profiles, or to view and manage
existing server profiles.
You may receive server profiles and different
configuration settings from your service providers
and company information management
department. These configuration settings may
145
Tools folder
include connection and other settings used by
different applications in your device.
Scroll to a server profile, and select Options and
from the following:
● Start configuration — Connect to the server
and receive configuration settings for your
device.
● New server profile — Create a server profile.
To delete a server profile, scroll to it, and press C.
146
Some settings may be preset for the device by your
service provider, and you may not be able to change
them.
General settings
In general settings, you can edit the general
settings of your device or restore the device to
original default settings.
You can adjust time and date settings also in the
clock. See "Clock ", p. 104.
Personalisation settings
Press
, and select Tools > Settings >
General > Personalisation.
You can edit settings related to the display, standby
mode, and general functions of your device.
Themes allows you to change the look of the
display. See "Themes", p. 101.
Voice comms. opens the settings for the Voice
commands application. See "Voice
commands", p. 144.
Tones allows you to change the tones of the
calendar, clock, and currently active profile.
Settings
Settings
Display
● Light sensor — Scroll left or right to adjust the
light sensor that observes the lighting conditions
and adjusts the brightness of the display. The
light sensor may cause the display to flicker in
low light.
● Font size — Adjust the size of the text and icons
on the display.
● Power saver time-out — Select the time-out
period after which the power saver is activated.
● Welcome note / logo — The welcome note or
logo is displayed briefly each time you switch on
the device. Select Default to use the default
image, Text to write a welcome note, or Image
to select an image from Gallery.
● Light time-out — Select a time-out after which
the backlight of the display is switched off.
● Rotate screen — Change the setting for
automatic display rotation. In most applications,
the display rotates automatically between
portrait and landscape modes based on the
orientation of the device. To ensure that the
automatic display rotation works, hold the
147
Settings
device in an upright position. Automatic rotation
is not functioning, if you change the display
rotation setting manually in an application.
When you exit the application, automatic
rotation is activated again.
Standby mode
● Active standby — Activate shortcuts to
applications in the standby mode.
● Shortcuts — Assign a shortcut to the selection
keys in the standby mode.
If the active standby is set off, you can also assign
keypad shortcuts for the different presses of the
scroll key.
● Active standby apps. — If the active standby is
set on, select the application shortcuts you want
to appear in the active standby.
● Operator logo — This setting is only available
if you have received and saved an operator logo.
Select Off if you do not want the logo to be
shown.
Language
Changing the settings for the phone language or
writing language affects every application in your
device, and the change remains effective until you
change these settings again.
148
● Phone language — Change the language of the
display text in your device. This also affects the
format used for date and time and the separators
used, for example, in calculations. Automatic
selects the language according to the
information on your SIM card. After you change
the display text language, the device restarts.
● Writing language — Change the writing
language. This affects the characters available
when writing text and the predictive text
dictionary used.
● Predictive text — Set predictive text input on
or off for all editors in the device. The predictive
text dictionary is not available for all languages.
Enhancement settings
Press
, and select Tools > Settings >
General > Enhancement.
Some enhancement connectors indicate which type
of enhancement is connected to the device. See
"Display indicators", p. 22.
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
● Default profile — Set the profile that you want
activated each time you connect a certain
compatible enhancement to your device.
● Automatic answer — Select whether you want
the device to answer an incoming call
automatically after 5 seconds. If the ringing type
TV-out settings
To change the settings for a TV-out connection,
select TV-Out and from the following:
● Default profile — Set the profile that you want
activated each time you connect a Nokia Video
Connectivity Cable to your device.
● TV screen size — Select the aspect ratio of the
TV: Normal or Widescreen for widescreen TVs.
● TV system — Select the analogue video signal
system that is compatible with your TV.
● Flicker filter — To improve image quality on the
screen of your TV, select On. The flicker filter may
not diminish image flicker on all TV screens.
Security settings
Phone and SIM
Press
, and select Tools > Settings >
General > Security > Phone and SIM card.
● PIN code request — When active, the code is
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
● PIN code, PIN2 code, and Lock code — You can
change the lock code, PIN code, and PIN2 code.
These codes can only include the numbers from
0 to 9.
If you forget the PIN or the PIN2 code, contact
your service provider. If you forget the lock code,
contact a Nokia Care point or your service
provider.See "Access codes", p. 16.
Settings
is set to Beep once or Silent, automatic answer
is disabled.
● Lights — Set whether lights remain on or are
switched off after the time-out. This setting is not
available for all enhancements.
Avoid using access codes similar to the
emergency numbers to prevent accidental
dialling of the emergency number.
● Keypad autolock period — Select whether the
keypad is locked when your device has been idle
for a certain period of time.
Tip: To lock or unlock the keypad manually,
press the left selection key, then *.
● Phone autolock period — To avoid
unauthorised use, you can set a time-out after
which the device automatically locks. A locked
device cannot be used until the correct lock code
is entered. To turn off the autolock period, select
None.
Tip: To lock the device manually, press the
power key. A list of commands opens.
Select Lock phone.
● Lock if SIM card changed — You can set the
device to ask for the lock code when an unknown
SIM card is inserted into your device. The device
149
Settings
maintains a list of SIM cards that are recognised
as the owner’s cards.
● Closed user group — You can specify a group of
people to whom you can call and who can call
you (network service).
● Confirm SIM services — You can set the device
to display confirmation messages when you are
using a SIM card service (network service).
Certificate management
Press
, and select Tools > Settings >
General > Security > Certificate management.
Digital certificates do not guarantee safety; they are
used to verify the origin of software.
In the certificate management main view, you can
see a list of authority certificates that are stored in
your device. Scroll right to see a list of personal
certificates, if available.
Digital certificates should be used if you want to
connect to an online bank or another site or remote
server for actions that involve transferring
confidential information. They should also be used
if you want to reduce the risk of viruses or other
malicious software and be sure of the authenticity
of software when downloading and installing
software.
150
Important: Even if the use of certificates
makes the risks involved in remote connections and
software installation considerably smaller, they
must be used correctly in order to benefit from
increased security. The existence of a certificate
does not offer any protection by itself; the
certificate manager must contain correct,
authentic, or trusted certificates for increased
security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or
"Certificate not valid yet" is shown even if the
certificate should be valid, check that the current
date and time in your device are correct.
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to
the listed owner.
View certificate details—check authenticity
You can only be sure of the correct identity of a
server when the signature and the period of validity
of a server certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate,
and select Options > Certificate details. When
you open certificate details, the validity of the
certificate is checked, and one of the following
notes may be displayed:
Change the trust settings
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to
the listed owner.
Scroll to an authority certificate, and select
Options > Trust settings. Depending on the
certificate, a list of the applications that can use the
selected certificate is shown. For example:
● Symbian installation: Yes — The certificate is
able to certify the origin of a new Symbian
operating system application.
● Internet: Yes — The certificate is able to certify
servers.
● App. installation: Yes — The certificate is able
to certify the origin of a new Java™ application.
Select Options > Edit trust setting to change the
value.
Security module
Press
, and select Tools > Settings >
General > Security > Security module.
To view or edit a security module (if available), scroll
to it, and press the scroll key.
Settings
● Certificate not trusted — You have not set any
application to use the certificate.
● Expired certificate — The period of validity has
ended for the selected certificate.
● Certificate not valid yet — The period of validity
has not yet begun for the selected certificate.
● Certificate corrupted — The certificate cannot
be used. Contact the certificate issuer.
To view detailed information about a security
module, scroll to it, and select Options > Security
details.
Restore original settings
Press
, and select Tools > Settings >
General > Factory settings.
You can reset some of the settings to their original
values. To do this, you need the lock code.
After resetting, the device may take a longer time
to power on. Documents and files are unaffected.
Positioning settings
Press
, and select Tools > Settings >
General > Positioning.
Positioning methods
● Integrated GPS — Use the integrated GPS
receiver of your device.
● Assisted GPS — Use Assisted GPS (A-GPS).
● Bluetooth GPS — Use a compatible external GPS
receiver with Bluetooth connectivity.
151
Settings
● Network based — Use information from the
cellular network (network service).
Positioning server
To define an access point, and positioning server for
A-GPS, select Positioning server. The positioning
server may be preset by your service provider, and
you may not be able to edit the settings.
Phone settings
In phone settings, you can edit settings related to
phone calls and network.
Call settings
Press
Call.
152
, and select Tools > Settings > Phone >
● Send my caller ID — You can set your phone
number to be displayed to (Yes) or hidden from
(No) the person to whom you are calling, or the
value may be set by your service provider when
you make a subscription (Set by network)
(network service).
● Call waiting — If you have activated call waiting
(network service), the network notifies you of a
new incoming call while you have a call in
progress. Set the function on (Activate) or off
(Cancel), or check whether the function is
activated (Check status).
● Internet call waiting — Select Activated to be
notified of a new incoming internet call while
you have a call in progress.
● Internet call alert — Select On to be alerted for
incoming internet calls. If you select Off, you are
not alerted, but a notification about missed calls
appears.
● Default call type — To set internet calls as the
default call type when making calls, select
Internet call. If an internet call service is not
available, a regular voice call is started instead.
● Reject call with SMS — To send a text message
to a caller informing why you could not answer
the call, select Yes.
● Message text — Write a text to be sent in a text
message when you reject a call.
● Image in video call — If video is not sent during
a video call, you can select a still image to be
displayed instead.
● Automatic redial — Select On, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
● Show call duration — Activate this setting if
you want the length of a call to be displayed
during the call.
● Speed dial — Select On, and the numbers
assigned to the number keys (2 to 9) can be
dialled by pressing and holding the key. See
"Speed dial a phone number", p. 122.
Tip: To switch between the phone lines,
press and hold # in the standby mode.
● Line change — To prevent line selection
(network service), select Disable if supported by
your SIM card. To change this setting, you need
the PIN2 code.
Call divert
Press
, and select Tools > Settings > Phone >
Call divert.
Call divert allows you to divert your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to divert and the desired
diverting option. Set the option on (Activate) or off
(Cancel), or check whether the option is activated
(Check status).
Several diverting options can be active at the same
time. When all calls are diverted,
is shown in
the standby mode.
Settings
● Anykey answer — Select On, and you can
answer an incoming call by briefly pressing any
keypad key, except the left and right selection
keys, the power key, and the end key.
● Line in use — This setting (network service) is
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you select Line 2 and have not
subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
shown in the standby mode.
Call barring and call diverting cannot be active at
the same time.
Call barring
Press
, and select Tools > Settings > Phone >
Call barring.
Call barring (network service) allows you to restrict
the calls that you make or receive with the device.
To change the settings, you need the barring
password from your service provider.
Call barring and call diverting cannot be active at
the same time.
When calls are barred, calls may be possible to
certain official emergency numbers.
Voice call barring
Select the desired barring option, and set it on
(Activate) or off (Cancel), or check whether the
option is active (Check status). Call barring affects
all calls, including data calls.
153
Settings
Internet call barring
To select whether anonymous calls are allowed
from the internet, set Anonymous call barring on
or off.
Network settings
Press
, and select Tools > Settings > Phone >
Network.
Your device can automatically switch between the
GSM and UMTS networks. The GSM network is
indicated with in the standby mode. The UMTS
.
network is indicated with
154
● Network mode — Select which network to use.
If you select Dual mode, the device uses the GSM
or UMTS network automatically, according to the
network parameters and the roaming
agreements between the wireless service
providers. Contact your network service provider
for details and roaming costs. This option is
shown only if supported by the wireless service
provider.
● Operator selection — Select Automatic to set
the device to search for and select one of the
available networks, or Manual to manually
select the network from a list. If the connection
to the manually selected network is lost, the
device sounds an error tone and asks you to
reselect a network. The selected network must
have a roaming agreement with your home
cellular network.
A roaming agreement is an agreement between
two or more service providers to enable the users
of one service provider to use the services of
other service providers.
● Cell info display — Select On to set the device
to indicate when it is used in a cellular network
based on microcellular network (MCN)
technology and to activate cell info reception.
Connection settings
In connection settings, you can edit access points
and other connectivity settings.
You can also edit settings for Bluetooth connectivity
in the Bluetooth connectivity application. See
"Settings", p. 79.
You can also edit settings for data cable connections
in the USB application. See "USB", p. 82.
Data connections and access
points
Your device supports packet data connections
(network service), such as GPRS in the GSM network.
When you use your device in GSM and UMTS
networks, multiple data connections can be active
at the same time, and access points can share a data
You can also use a WLAN data connection. Only one
connection in one wireless LAN can be active at a
time, but several applications can use the same
internet access point.
indicates a protected access point.
indicates a packet data access point.
indicates a WLAN access point.
Tip: You can create internet access points in
a wireless LAN with the WLAN wizard.
To establish a data connection, an access point is
required. You can define different kinds of access
points, such as the following:
To create a new access point, select Options >
New access point.
● Internet access point (IAP) to send and receive email and connect to the internet
● Connection name — Enter a descriptive name
for the connection.
● Data bearer — Select the data connection type.
● MMS access point to send and receive multimedia
messages
Check the type of access point you need with your
service provider for the service you want to access.
For availability and subscription to packet data
connection services, contact your service provider.
Access points
Create a new access point
Press
, and select Tools > Settings >
Connection > Access points.
You may receive access point settings in a message
from a service provider. Some or all access points
may be preset for your device by your service
provider, and you may not be able to change, create,
edit, or remove them.
Settings
connection. In the UMTS network, data connections
remain active during voice calls.
To edit the settings of an access point, select
Options > Edit. Follow the instructions from your
service provider.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined or with a red
asterisk. Other fields can be left empty, unless you
have been instructed otherwise by your service
provider.
To be able to use a data connection, your service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Press
, and select Tools > Settings >
Connection > Access points > Options > Edit
or New access point.
155
Settings
Follow the instructions from your service provider.
● Access point name — You obtain the access
point name from your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided
by the service provider.
● Prompt password — If you must enter the
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
● Password — A password may be needed to
make a data connection and is usually provided
by the service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send
your password encrypted when possible.
● Homepage — Depending on the access point
you are setting up, enter the web address or the
address of the multimedia messaging centre.
Select Options > Advanced settings to change
the following settings:
156
● Network type — Select the internet protocol
type to transfer data to and from your device. The
other settings depend on the selected network
type.
● Phone IP address (for IPV4 only) — Enter the IP
address of your device.
● DNS address — Enter the IP addresses of the
primary and secondary DNS servers, if required
by your service provider. Contact your internet
service provider to obtain these addresses.
● Proxy server address — Enter the address of
the proxy server.
● Proxy port number — Enter the port number
of the proxy server.
WLAN internet access points
Press
, and select Tools > Settings >
Connection > Access points > Options > Edit
or New access point.
Follow the instructions from the WLAN service
provider.
● WLAN network name — Select Enter
manually or Search for networks. If you select
an existing network, WLAN network mode and
WLAN security mode are determined by the
settings of its access point device.
● Network status — Define whether the network
name is displayed.
● WLAN network mode — Select Ad-hoc to
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same WLAN network
name.
● WLAN security mode — Select the encryption
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select Open network, no
To enter the settings for the selected security mode,
select WLAN security settings.
Security settings for WEP
● WEP key in use — Select the wired equivalent
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
● Authentication type — Select Open or
Shared for the authentication type between
your device and the WLAN access point device.
● WEP key settings — Enter WEP encryption
(length of the key), WEP key format (ASCII or
Hexadecimal), and WEP key (the WEP key data
in the selected format).
Security settings for 802.1x and WPA/WPA2
● WPA/WPA2 — Select the means of
authentication: EAP to use an extensible
authentication protocol (EAP) plug-in, or Preshared key to use a password. Complete the
appropriate settings:
● EAP plug-in settings — Enter the settings as
your service provider instructs.
● Pre-shared key — Enter a password. The
same password must be entered on the WLAN
access point device.
● WPA2 only mode — Only WPA2 enabled devices
are allowed to establish a connection in this
mode.
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
Settings
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
● IPv4 settings — Enter the IP address of your
device, the subnet IP address, the default
gateway, and the IP addresses of the primary and
secondary DNS servers. Contact your internet
service provider for these addresses.
● IPv6 settings — Define the type of DNS address.
● Ad-hoc channel (only for Ad-hoc) — To enter a
channel number (1-11) manually, select User
defined.
● Proxy server address — Enter the address for
the proxy server.
● Proxy port number — Enter the proxy port
number.
Packet data settings
Press
, and select Tools > Settings >
Connection > Packet data.
The packet data settings affect all access points
using a packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet
157
Settings
data network. Starting an active packet data
connection (for example, to send and receive email) is quicker. If there is no packet data
coverage, the device periodically tries to
establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or
action that needs it.
● Access point — The access point name is needed
to use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable
the use of HSDPA (network service) in UMTS
networks.
Wireless LAN settings
Press
, and select Tools > Settings >
Connection > Wireless LAN.
● Show WLAN availability — Select whether
is displayed in the standby mode when a wireless
LAN is available.
● Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates
the indicator.
158
To view advanced settings, select Options >
Advanced settings. Changing wireless LAN
advanced settings is not recommended.
SIP settings
Press
, and select Tools > Settings >
Connection > SIP settings.
Session Initiation Protocol (SIP) settings are needed
for certain network services using SIP. You may
receive the settings in a special text message from
your service provider. You can view, delete, or
create these setting profiles in SIP settings.
Internet call settings
Press
, and select Tools > Settings >
Connection > Internet tel..
To create a new internet call profile, select
Options > New profile.
To edit an existing profile, select Options > Edit.
Configurations
Press
, and select Tools > Settings >
Connection > Configurations.
You may receive trusted server settings from your
service provider in a configuration message. You
can save view or delete these settings in
configurations.
Press
, and select Tools > Settings >
Connection > APN control.
With the access point name control service, you can
restrict packet data connections and allow your
device to use only certain packet data access points.
Settings
Access point name control
This setting is only available if your SIM card
supports the access point control service.
To set the control service on or off or to change the
allowed access points, select Options and the
corresponding option. To change the options, you
need your PIN2 code. Contact your service provider
for the code.
Application settings
To edit the settings of some of the applications in
your device, press
, and select Tools >
Settings > Applications.
To edit the settings, you can also select Options >
Settings in each application.
159
Troubleshooting
Troubleshooting
To view frequently asked questions about your
device, visit the product support pages at
www.nseries.com/support .
Q: What is my password for the lock, PIN, or
PUK codes?
A: The default lock code is 12345. If you forget or
lose the lock code, contact a Nokia Care point or your
service provider. If you forget or lose a PIN or PUK
code, or if you have not received such a code,
contact your network service provider. For
information about passwords, contact your access
point provider, for example, a commercial internet
service provider (ISP) or network service provider.
Q: How do I close an application that is not
responding?
A: Press and hold
. To close an application, scroll
to it, and press C . Pressing C does not close Music
player. To close Music player, select it from the list,
and Options > Exit.
Q: Why do images look smudgy?
160
A: Ensure that the camera lens protection windows
are clean.
Q: Why do missing, discoloured, or bright
dots appear on the screen every time I turn
on my device?
A: This is a characteristic of this type of display.
Some displays may contain pixels or dots that
remain on or off. This is normal, not a fault.
Q: Why can't my device establish a GPS
connection?
A: Find more information about GPS, GPS receiver,
satellite signals, and location information in this
user guide. See "Positioning (GPS)", p. 57.
Q: Why can’t I find my friend’s device while
using Bluetooth connectivity?
A: Check that both devices are compatible, have
activated Bluetooth connectivity, and are not in
hidden mode. Check also that the distance between
the two devices is not over 10 metres (33 feet) and
that there are no walls or other obstructions
between the devices.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you
can either end the connection using the other
device or by deactivating Bluetooth connectivity.
Q: Why can’t the other device see the files
stored on my device in the home network?
A: Make sure that you have configured the home
network settings, content sharing is turned on in
your device, and the other device is UPnP
compatible.
Q: What can I do if my home network
connection stops working?
A: Switch off the wireless LAN (WLAN) connection
from your compatible PC and your device, and
switch it on again. If this does not help, restart your
compatible PC and your device. If the connection
still does not work, reconfigure the WLAN settings
in both your compatible PC and device. See
"Wireless LAN", p. 76. See "Connection
settings", p. 154.
Q: Why can't I see my compatible PC in my
device in the home network?
A: If you are using a firewall application in your
compatible PC, check that it allows home media
server to use the external connection (you can add
Home media server to the firewall application's
exceptions list). Check from the firewall settings
that the firewall application allows traffic to the
following ports: 1900, 49152, 49153, and 49154.
Some WLAN access point devices have a built-in
firewall. In such cases, check that the firewall in the
access point device does not block traffic to the
following ports: 1900, 49152, 49153, and 49154.
Check that the WLAN settings are the same in your
device and compatible PC.
Q: Why can't I see a wireless LAN (WLAN)
access point even though I know I'm within
its range?
A: The WLAN access point may use a hidden service
set identifier (SSID). You can only access networks
that use a hidden SSID if you know the correct SSID,
and have created a WLAN Internet access point for
the network on your Nokia device.
Troubleshooting
Press
, and select Tools > Bluetooth >
Bluetooth > Off.
Q: How do I switch wireless LAN (WLAN) off
on my Nokia device?
A: The WLAN on your Nokia device switches off
when you are not trying to connect, not connected
to another access point, or not scanning for
available networks. To further reduce battery
consumption, you can specify that your Nokia
device does not scan, or scans less often, for
available networks in the background. WLAN
switches off in between background scans.
To change the background scan settings:
1. Press
, and select Tools > Settings >
Connection > Wireless LAN.
161
Troubleshooting
2. To increase the background scan time interval,
adjust the time in Scan for networks. To stop
background scans, select Show WLAN
availability > Never.
3. To save your changes, press Back.
When Scan for networks is set to Never, the
WLAN availability icon is not shown in the
standby mode. However, you can still manually
scan for available WLAN networks, and connect
to WLAN networks as usual.
Q: How can I save my data before deleting it?
A: To save data, use Nokia Nseries PC Suite to make
a back-up copy of all data to a compatible computer;
send images to your e-mail address, then save the
images to your computer; or send data using
Bluetooth connectivity to a compatible device. You
can also store data on a compatible memory card.
Q: Why can’t I select a contact for my
message?
A: The contact card does not have a phone number,
an address, or an e-mail address. Press
, select
Contacts, and edit the contact card.
Q: How can I end the data connection when
the device starts a data connection again and
again?
162
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To
stop the device from making a data connection,
press
, and select Messaging > Options >
Settings > Multimedia message > Multimedia
retrieval and Manual to have the multimedia
messaging centre save messages to be retrieved
later, or Off to ignore all incoming multimedia
messages. If you select Manual, you receive a
notification when there is a new multimedia
message that you can retrieve in the multimedia
message centre. If you select Off, the device does
not make any network connections related to
multimedia messaging. To set the device to use a
packet data connection only if you start an
application or action that needs it, press
, and
select Tools > Settings > Connection > Packet
data > Packet data connection > When
needed. If this does not help, switch the device off,
and switch it on again.
Q: Why do I have problems connecting the
device to my PC?
A: Ensure that you have the latest version of Nokia
Nseries PC Suite and that it is installed and running
on your compatible PC. For further information on
how to use Nokia Nseries PC Suite, see the help
function on Nokia Nseries PC Suite or visit the Nokia
support pages.
A: You cannot use your device as a fax modem.
However, with call diverting (network service), you
can divert incoming fax calls to another phone
number.
Troubleshooting
Q: Can I use my device as a fax modem with
a compatible PC?
163
Battery information
Battery information
Charging and discharging
Your device is powered by a rechargeable battery.
The battery can be charged and discharged
hundreds of times, but it will eventually wear out.
When the talk and standby times are noticeably
shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your
battery only with Nokia approved chargers
designated for this device.
If a replacement battery is being used for the first
time or if the battery has not been used for a
prolonged period, it may be necessary to connect
the charger, then disconnect and reconnect it to
begin charging the battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully
charged battery will lose its charge over time.
164
If the battery is completely discharged, it may take
several minutes before the charging indicator
appears on the display or before any calls can be
made.
Use the battery only for its intended purpose. Never
use any charger or battery that is damaged.
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object such as
a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the
battery. (These look like metal strips on the
battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Shortcircuiting the terminals may damage the battery or
the connecting object.
Leaving the battery in hot or cold places, such as in
a closed car in summer or winter conditions, will
reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15°C and
25°C (59°F and 77°F). A device with a hot or cold
battery may not work temporarily, even when the
battery is fully charged. Battery performance is
particularly limited in temperatures well below
freezing.
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste.
Nokia battery
authentication guidelines
Always use original Nokia batteries for your safety.
To check that you are getting an original Nokia
battery, purchase it from an authorised Nokia
dealer, and inspect the hologram label using the
following steps:
Successful completion of the steps is not a total
assurance of the authenticity of the battery. If you
have any reason to believe that your battery is not
an authentic, original Nokia battery, you should
refrain from using it, and take it to the nearest
authorised Nokia service point or dealer for
assistance. Your authorised Nokia service point or
dealer will inspect the battery for authenticity. If
authenticity cannot be verified, return the battery
to the place of purchase.
Authenticate hologram
1. When you look at the
hologram on the label, you
should see the Nokia
connecting hands symbol
from one angle and the
Nokia Original
Enhancements logo when
looking from another angle.
2. When you angle the
hologram left, right, down
and up, you should see 1, 2,
3 and 4 dots on each side
respectively.
Battery information
Do not dismantle or shred cells or batteries. In the
event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. In the event
of such a leak, flush your skin or eyes immediately
with water, or seek medical help.
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with
the hologram on the label is an authentic Nokia
battery, please do not use the battery. Take it to the
nearest authorised Nokia service point or dealer for
assistance. The use of a battery that is not approved
by the manufacturer may be dangerous and may
result in poor performance and damage to your
device and its enhancements. It may also invalidate
any approval or warranty applying to the device.
165
Battery information
166
To find out more about original Nokia batteries,
visit www.nokia.com/battery.
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
● Keep the device dry. Precipitation, humidity, and
all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If
your device does get wet, remove the battery,
and allow the device to dry completely before
replacing it.
● Do not use or store the device in dusty, dirty
areas. Its moving parts and electronic
components can be damaged.
● Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
● Do not store the device in cold areas. When the
device returns to its normal temperature,
moisture can form inside the device and damage
electronic circuit boards.
● Do not attempt to open the device other than as
instructed in this guide.
● Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and
fine mechanics.
● Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
● Do not paint the device. Paint can clog the
moving parts and prevent proper operation.
● Use a soft, clean, dry cloth to clean any lenses,
such as camera, proximity sensor, and light
sensor lenses.
Care and maintenance
Care and maintenance
● Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
device and may violate regulations governing
radio devices.
● Use chargers indoors.
● Always create a backup of data you want to keep,
such as contacts and calendar notes.
● To reset the device from time to time for
optimum performance, power off the device and
remove the battery.
These suggestions apply equally to your device,
battery, charger, or any enhancement. If any device
167
Care and maintenance
168
is not working properly, take it to the nearest
authorized service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union all electrical and
electronic products, batteries, and
accumulators must be taken to separate collection
at the end of their working life. Do not dispose of
these products as unsorted municipal waste.
Return the products to collection to prevent
possible harm to the environment or human health
from uncontrolled waste disposal and to promote
the sustainable reuse of material resources.
Collection information is available from the product
retailer, local waste authorities, national producer
responsibility organizations, or your local Nokia
representative. For more information, see product
Eco-Declaration or country-specific information at
www.nokia.com.
Small children
Your device and its enhancements may contain
small parts. Keep them out of the reach of small
children.
Operating environment
This device meets RF exposure guidelines when
used either in the normal use position against the
ear or when positioned at least 1.5 centimeters (5/8
inch) away from the body. When a carry case, belt
clip, or holder is used for body-worn operation, it
should not contain metal and should position the
device the above-stated distance from your body.
To transmit data files or messages, this device
requires a quality connection to the network. In
some cases, transmission of data files or messages
may be delayed until such a connection is available.
Ensure the above separation distance instructions
are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials
may be attracted to the device. Do not place credit
cards or other magnetic storage media near the
device, because information stored on them may be
erased.
Medical devices
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of
the medical device to determine if they are
adequately shielded from external RF energy or if
you have any questions. Switch off your device in
health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Additional safety information
Additional safety information
Implanted medical devices
Manufacturers of medical devices recommend that
a minimum separation of 15.3 centimeters (6
inches) should be maintained between a wireless
device and an implanted medical device, such as a
pacemaker or implanted cardioverter defibrillator,
to avoid potential interference with the medical
device. Persons who have such devices should:
169
Additional safety information
● Always keep the wireless device more than 15.3
centimeters (6 inches) from the medical device
when the wireless device is turned on.
● Not carry the wireless device in a breast pocket.
● Hold the wireless device to the ear opposite the
medical device to minimize the potential for
interference.
● Turn the wireless device off immediately if there
is any reason to suspect that interference is
taking place.
● Read and follow the directions from the
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult
your health care provider.
Hearing aids
Some digital wireless devices may interfere with
some hearing aids. If interference occurs, consult
your service provider.
Vehicles
170
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag
systems. For more information, check with the
manufacturer, or its representative, of your vehicle
or any equipment that has been added.
Only qualified personnel should service the device
or install the device in a vehicle. Faulty installation
or service may be dangerous and may invalidate any
warranty that may apply to the device. Check
regularly that all wireless device equipment in your
vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive
materials in the same compartment as the device,
its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with
great force. Do not place objects, including installed
or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is
prohibited. Switch off your device before boarding
an aircraft. The use of wireless teledevices in an
aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network,
and may be illegal.
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Potentially explosive
atmospheres include areas where you would
normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off
the device at refuelling points such as near gas
pumps at service stations. Observe restrictions on
the use of radio equipment in fuel depots, storage,
and distribution areas; chemical plants; or where
blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on
boats, chemical transfer or storage facilities and
areas where the air contains chemicals or particles
such as grain, dust, or metal powders. You should
check with the manufacturers of vehicles using
liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely
used in their vicinity.
Emergency calls
Important: Wireless phones, including this
device, operate using radio signals, wireless
networks, landline networks, and userprogrammed functions. Because of this,
connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device
for essential communications like medical
emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for
adequate signal strength.
Some networks may require that a valid SIM card
is properly inserted in the device.
Additional safety information
Potentially explosive
environments
2. Press the end key as many times as needed to
clear the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
If certain features are in use, you may first need to
turn those features off before you can make an
emergency call. If the device is in the offline or flight
profile mode, you may need to change the profile
to activate the phone function before you can make
171
Additional safety information
172
an emergency call. Consult this guide or your service
provider for more information.
When making an emergency call, give all the
necessary information as accurately as possible.
Your wireless device may be the only means of
communication at the scene of an accident. Do not
end the call until given permission to do so.
Certification information
(SAR)
This mobile device meets guidelines for
exposure to radio waves.
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ
a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with
the device transmitting at its highest certified
power level in all tested frequency bands. The actual
SAR level of an operating device can be below the
maximum value because the device is designed to
use only the power required to reach the network.
That amount changes depending on a number of
factors such as how close you are to a network base
station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.62 W/
kg.
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements and the network band. Additional SAR
information may be provided under product
information at www.nokia.com.
A
access codes 16
access points 77, 155
accessories
See enhancements
activation keys 98
active standby mode 103,
148
active toolbar
in camera 34
in gallery 47
address book
See contacts
alarm clock 104
alarm, calendar note 105
albums, media 47
anniversary notes 105
answering calls 121
application manager 140
applications 140
attachments 112, 113
audio messages 109
auto-update for time/
date 104
B
backlight time-out 147
barcodes 138
battery
power saver setting 147
saving power 17
birthday notes 105
blogs 71, 98
Bluetooth connectivity
device address 80
device visibility 80
pairing devices 81
receiving data 81
security 80
sending data 80
settings 79
switching on/off 79
bookmarks 72
brightness, display 147
browser
bookmarks 72
browsing pages 69, 71
cache memory 73
downloads 72
security 74
settings 74
C
widgets
71
cable connection 82
cache memory 73
calculator 140
calendar 105
call waiting 122
calls 120
answering 121
conference 121
duration of 130
internet calls 129
log for 130
options during 120
recording 99
rejecting 121
settings 152
camera
colour 42
flash 37
geotagging 36
image quality 42
imaging mode 35
lighting 42
location information 36
scenes 37
Index
Index
173
Index
174
self-timer 38
sequence mode 37
settings 41
video mode 40
video quality 43
cell broadcast messages 107
certificates 150
character encoding 109
charts, spreadsheet 136
clipboard, copying to 109
clock 103, 104
computer connections 82
See also data connections
conference calls 121
configuration
See settings
connection manager 78
contact information 15
contacts
copying 133
default information 133
deleting 132
editing 132
groups 134
images in 132
ringing tones 133
saving 132
sending 132
synchronising 145
voice tags 132
converter
currency 137
copying text to
clipboard 109
copyright protection 98
currency
converter 137
customer service 15
D
data connections
cable 82
device manager 145
PC connectivity 82
synchronisation 145
date and time 104
declining calls 121
device manager 145
dialled numbers 130
dismissing calls 121
display settings 147
document applications 136
downloads 72
DRM (digital rights
management) 98
duration of calls 130
E
e-mail messages 112
end all calls option 122
enhancements settings
Excel, Microsoft 136
148
F
factory settings,
restoring 151
feeds, news 71
Flash Player 98
FM radio 91
font settings 147
formatting memory
cards 144
G
gallery 45
games 25
general information 15
GPS (Global Positioning
System) 57
grid view of menus 103
H
headset 31
help application 15
home network 53
HSDPA (high-speed downlink
packet access) 23
IAPs (internet access
points) 77
images
editing 48
printing 51, 52
sharing online 52
inbox, message 111
indicators and icons 22
installation of
applications 141
internet calls 127, 129
connecting 128
making 129
profiles 128, 158
settings 158
internet connection 69
See also browser
J
J2ME Java application
support 140
Java scripts/
applications 140
K
keyguard 23, 149
keypad 23, 149
L
landmarks 66
language settings 148
light settings 147
list view of menus 103
location information 36, 57
lock code 16
locking
keypad 23, 149
loudspeaker 31
M
mailbox
e-mail 112
video 121
voice 121
main menu 103
Maps 59
media
Flash Player 98
music player 86
radio 91
RealPlayer 97
streaming 97
voice recorder 99
meeting notes 105
meetings, setting up 105
memo notes 105, 137
memory
clearing 18
web cache 73
messages
e-mail 112
folders for 107
icon for incoming 111
multimedia 111
settings 114
voice 121
Mini Map 71
MMS (multimedia message
service) 109, 111
multimedia menu 24
multimedia messages 109,
111
music player 86
muting sound 121
my numbers 132
Index
I
N
N-Gage 25
settings 30
N-Gage views 26
navigation tools 57
network settings 154
news feeds 71
Nokia contact
information 15
Nokia Lifeblog 98
notes 137
175
Index
O
offline mode 32
operator logo 148
options menu for calls 120
outbox, message 107
P
176
packet data connection
access point settings 155
counters 130
settings 157
page overview 71
PDF reader 137
personal certificates 150
personalisation 101, 147
phonebook
See contacts
photographs
See camera
PictBridge 51
PIN code 16
PIN2 code 16
positioning information 57
positioning settings 151
power saver 147
PowerPoint, Microsoft 136
predictive text entry
mode 108
presentations,
multimedia 51, 112, 136
printing
images 51
print basket 48
product support pages 15
profiles
internet call profile 128,
158
offline restrictions 32
proxy settings 156
PUK codes 16
punctuation, text entry 109
Q
Quickmanager 137
Quickpoint 136
Quicksheet 136
Quickword 136
R
radio 91
RealPlayer 97
recording
calls 99
sounds 99
recording video clips 40
redial feature 152
rejecting calls 121
remote mailbox 112
remote SIM mode 81
ringing tones 101, 102
roaming
S
154
scenes, image and video 37
screen settings 147
security
certificates 150
web browser 74
WEP 157
WPA 157
security code 16
security module 151
self-timer, camera 38
sent messages folder 107
service commands 107
service messages 112
setting wizard 20
settings
access point name
control 159
access points 155
applications 159
Bluetooth connectivity 79
call barring 153
call divert 153
calls 152
camera 41
certificates 150
configuration 158
display 147
slide show 48
SMS (short message
service) 109
software applications 140
software update 16
songs 86
speaker phone 31
special characters, text
entry 109
speed dialling 122
standby mode 103, 148
streaming media 97
support 15
Symbian applications 140
synchronisation of data 145
T
37
templates, message 110
text entry 108
text messages
receiving and reading 111
replying to 111
sending 109
settings 114
SIM messages 114
themes 101
time and date 104
time zone settings 104
time-out for backlight 147
tones
ring settings 101, 102
settings 147
toolbar 34, 47
transferring data 20
transferring music 89
troubleshooting 160
trust settings 151
TV configuration 149
tv-out mode 50
Index
enhancements 148
home network 54
internet call 158
language 148
network 154
packet data 157
packet data access
points 155
personalisation 147
positioning 151
RealPlayer 97
shortcuts 148
SIP 158
standby 148
tv-out 149
Video Centre 85
video sharing 125
web browser 74
WLAN 157, 158
WLAN internet access
points 156
shared video 125
shooting modes, camera
shortcuts 148
signature, digital 150
SIM card
contacts 134
messages 114
SIM card security 149
SIP 158
U
unlocking keypad 23, 149
UPIN code 16
UPnP (Universal Plug and Play
architecture) 53
UPUK code 16
USB cable connection 82
V
video calls 123, 124
options during 124
video clips
shared 125
Visual Radio 91
voice applications 144
voice calls
See calls
voice commands 122, 144
voice over IP 129
177
Index
voice over IP (VOIP) 127
voice recorder 99
VoIP 129
volume controls 31
W
wallpaper 101
web connection 69
web logs 71, 98
week settings, calendar 105
welcome 20
welcome note 147
WEP 157
widgets 71
wireless LAN (WLAN) 76
wireless LAN settings 158
Word, Microsoft 136
world clock 104
WPA 157
Z
zip manager 138
zooming 35, 41
178
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising