Oscillating Ceiling Fan
Oscillating Ceiling Fan
model no. 052-8399-0
Toll-free 1-866-827-4985
IMPORTANT: For your safety please read and understand
this manual before installing or operating this product.
OWNER’S MANUAL
V1.2016
Toll Free 1-866-827-4985 model no. 052-8399-0
Safety Rules – Read and Save These Instructions
1. To reduce the risk of electric shock, ensure electricity has been t
fuse box before beginning.
2. All wiring must be in accordance with the national and local electrical codes. Electrical installation should be performed by a
qualified licensed electrician.
3. WARNING: To reduce the risk of electric shock or fire, do not use this fan with any solid-state fan-speed control device. It will
permanently damage the electronic circuitry.
4. Do not install this fan with variable speed wall control or wall-mounted dimmer switch. It will permanently damage the fan’s remote
control receiver and cause the fan’s functions to fail.
ON
ON / OFF switch
NO Variable speed wall control
NO Dimmer switch
5. CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.
6. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lb (15.9 kg).
Use only UL listed outlet boxes marked “FOR FAN SUPPORT.”
7. The fan must be mounted with a minimum of 7' (2.13 m) from the trailing edge of the blades to the floor.
8. Avoid placing objects in the path of the blades.
9. To avoid personal injury or damage to the fan and other items be cautious when working around or cleaning the fan.
10. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth will be suitable for most cleaning.
11. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box
and the ungrounded conductor on the other side of the outlet box.
12. All set screws must be checked and retightened where necessary before installation.
13. This product is suitable for installation in damp locations.
!
Warning: To reduce the risk of fire, electric shock or personal injury, mount fan to oulet box marked”acceptable for fan support” with
the screws provided with the outlet box.
!
Warning: To risk of personalinjury, do not bend the blade arms (also referred to as flanges), the brackets,balancing the blades or
or cleaning the fan. Do not insert foreign objects between rotating fan blades.
!
Warning: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "acceptable for fan support of 35 lb
(15.9 kg) or less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of light
fixtures are not acceptable for fan support and may need to be replaced Due to the complexity of the installation of this fan, a
qualified licensed electrician is strongly recommended.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
1
3
Tools Needed (not supplied)
Required
Flathead
screwdriver
Crosshead
screwdriver
Safety glasses
Pliers
Wire cutters
Electrical tape
Step ladder
Helpful
Wire strippers
Soft cloth
2 Toll Free 1-866-827-4985 model no. 052-8399-0
3
Unpacking Your Fan
Unpack and inspect fan carefully to be certain all contents are included.
1.
2.
3.
4.
Hanger Bracket
Canopy
Decorative Cap
Downrod Set (Included Octangle Hanger Ball,
5.
6.
7.
8.
6” Downrod, Hanger Pin & Lock Pin)
Fan Fixture Set
Remote Control
Receiver
Hardware Bag
8
Wood screws
2
1
5
3
4
6
Exploded View Detail
Spring washers
2 pcs
Flat washers
Mounting screws
“J” hook
2 pcs
2 pcs
1 pc
Zip tie
1 pc
7
Hanger Bracket
Octagonal Hanger Ball
Canopy
Decorative Cap
Downrod
Hanger Pin
Lock Pin
Collar
Fan Fixture Set
2 pcs
3
Safety Instructions
Read all safety information and installation instructions before you begin to install the fan and save
instructions.
1. All set screws of the fan must be checked and retightened where necessary before installation.
3. The safeguards provided by these safety instructions and by the separate installation instructions
are not meant to cover all possible conditions and situations that may occur. It must be understood
that common sense, caution and care are factors which can not be built into this product.
4. These factors must be supplied by the person(s) installing, caring for and operating the fan.
Installation instructions
!
!
IMPORTANT: Before you begin installing the fan, carefully read all information on the separate
sheet “safety instructions” as well as the following installation instructions. If in doubt , “if in doubt”,
consult a qualified electrician.
Save all instructions.
NOTE: The fan weight is 11 lb (5 kg). Be sure the outlet box you are using is securely attached
. to the building structure and can support the full weight of the fan. Failing to do so can result
in serious injury.
Installation Steps :
1.Turn OFF the electric circuit at the main fuse or circuit breaker
box (Fig.1).
Fig.1
4
Toll Free : 1-866-827-4985 model no. 052-8399-0
2.(1) Securely attach the mounting bracket to an outlet box marked
“Acceptable for Fan Support ”, using the supplied outlet box
screws with spring washers (Fig. 2a).
Mounting
Bracket
Outlet Box
Spring Washer
(2) Drill two mounting holes in the ceiling joist.
Securely attach the mounting bracket to the ceiling, using the
two sets of long wood screws with flat washers (Fig. 2b).
Outlet Box Screw
Fig. 2a
Mounting
Bracket
Flat Washer
Wood Screw
Fig. 2b
Downrod
installation
!
!
CAUTION: “It fan is being installed outside it
has to be installed under cover (i.e. porch or
veranda). It cannot be installed in an area
where it is exposed due the elements (i.e.
rain and snow)”.
Flush mount
installation
CANNOT be
installed on
angled or
vaulted ceilings.
WARNING: Mount only to an outlet box marked "ACCEPTABLE FOR FAN SUPPORT".
Lock Pin
Hanger Pin
4. Thread the motor wires and safty cable through the decorative cap, canopy and downrod (Fig. 4).
Canopy
Motor Wires
Downrod
Decorative Cap
Collar
5
5. Loosen the collar screws part way. Insert the downrod into the collar.
Slide hanger pin through holes of collar and downrod (Fig. 5).
Canopy
Motor Wires
Downrod
Decorative Cap
Hanger Pin
Collar
Fig. 5
6. Insert and tighten the two collar screws. Slide lock pin into hanger
pin until it is locked into position (Fig. 6).
Lock Pin
Collar Screws
Fig. 6
7. Hang the fan on hanger bracket, and make sure the slot of octagonal
hanger ball is snapped into the clip of hanger bracket exactly (Fig. 7).
Hanger Bracket
Slot
clip
Fig.7
!
NOTE: There are four slots in octagonal hanger ball. Adjust the octagonal hanger
ball to get desired direction, and then snap the clip of hanger bracket
into the slot of octagonal hanger ball.
For added security attach safety cable from fan unit to “J” hook in outlet box.
Secure by looping zip tie through safety cable and “J” hook. Tighten zip tie
securely .
Safety
Cable
“J” hook
Zip Tie
Toll Free : 1-866-827-4985 model no. 052-8399-0
8. Make wire connections using wire nuts: (Fig. 8)
Between fan and receiver:
· Connect the black wire marked “L” from the fan to the black wire marked “TO MOTOR L” from
the receiver.
· Connect the blue wire marked “OSCILLATE L” from the fan to the blue wire marked “FOR
CENTER MOTOR ” from the receiver.
· Connect the white wire marked “N” from the fan to the WHITE wire marked “TO MOTOR N” from
the receiver.
Between receiver and mains:
· Connect the black live wire marked “AC IN L” from the receiver to the live wire (typically black)
from the outlet box.
· Connect the white neutral wire marked “AC IN N” from the receiver to the neutral wire (typically
white) from the outlet box.
· Connect the green ground wires from the mounting bracket and hanger ball to the ground wire
(bare or green) from the outlet box.
Live
Wire
(Black)
Neutral
Wire
(White)
Grounding
Wire
(Green/ bare copper)
Ceiling Outlet
Box
Green
White
Black
Blue
SUR
Black
White
Fan
ON
6
Fig. 8
Remote and Receiver Pairing
Codes are set by pushing the dip switches located on the transmitter and receiver up or
down. It is important that the code used for both the remote and receiver are identical
for the two devices to be able to communicate; otherwise the remote will not be able
to control the fan.
If you plan to install more than one fan then each fan will require the remote and receive to
use a unique code, or else one remote will be able to control more than one fan.
7
Installing Receiver Assembly
Once the connection has been made, the receiver inserts into the drop rod hanging
bracket. The canopy comes up to cover the receiver and bracket .
Leave unconnected and do not cut .
!
VIEW
AFTER INSTALLATION
!
!
9. Loosen two canopy screws part way, and then push the canopy upwards by inserting canopy
screw heads into key hole slots, rotate the canopy till it is locked in place, and finally tighten canopy
screws (Fig. 9).
Fig.10
Attach the decorative cap to canopy, and rotate it clockwise until
Hanger Bracket
tight.
Canopy Screw
Canopy
Key Hole Slot
Decorative Cap
Fig. 9
10. The slide switch on fan fixture sets direction of fan rotation. Select the desired direction of fan
rotation. Push the slide switch down for "Forward" and up for "Reverse" (Fig. 10).
Reverse
Fan Fixture
Slide Switch
Forward
!
!
Fig. 10
Note: Wait for fan to stop before reversing the direction of blade rotation.
IMPORTANT: Reverse switch must be set either completely
up or completely DOWN for fan to function. If the reverse
switch is set in the middle position, fan will not operate.
Toll Free : 1-866-827-4985 model no. 052-8399-0
Operation
11. Turn on the electric circuit at the main fuse or circuit breaker box (Fig. 11).
Fig. 11
ry
12. Install the 9 V battery (included). To prevent damage to transmitter
remove the battery if not used for long periods .
9V
B a tt
e
8
Fig. 12
13. The fan 3-speed control is used to set
the fan speeds as follows: (Fig. 13)
OFF:
HI: Turn on the fan at high speed.
MED: Turn on the fan at medium
speed.
LOW: Turn on the fan at low speed.
OSCILLATION: The fan will stay at
the same sirection where the
oscillations is turn off.
OSCILLATION
FAN OFF
HI
LOW
MED
remote control
Fig. 13
9
MAINTENANCE
.
.
Because of the fan’s natural movement, some connections may become loose. Check the support
connections, brackets and blade attachments twice a year. Ma ke sure they are secure.
There is no need to oil your fan. The motor has permanently-lubricated bearings.
CARE AND CLEANING
.
.
Dust your fan periodically with a soft,dry cloth. Do not use harsh cleaners or materials as they may
damage the unit.
To prevent bending the blades during cleaning, support the blades so that no pressure is applied to
them.
Caution!
Do not allow water to come in contact with fan blades or the ceiling fan. Doing so will create
fire and/or shock hazards, damaging property.
TROUBLESHOOTING
If problems persist,seek help from a certified electrician.
Problem
Fan is noisy
during
operation.
Possible reason
. Blade screws are loose.
. The mounting bracket or canopy is loose.
. Screws securing downrod to hanger are
loose.
. Wire connectors are vibrating against the
inside of canopy.
. Canopy is rattling against ceiling.
. Motor housing screws have come loose.
Fan does not . Fuse or circuit breaker is blown.
start.
. Loose or incorrect power line
connections to the fan or switch wires.
Solution
. Tighten screws on blades with a
screwdriver.
. Check and fasten the screws.
. Check and fasten screws.
. Disconnect power at fuse box, loosen
canopy and re-position connectors.
. Be sure canopy is not touching ceiling.
. Check and fasten the screws.
. Check main fuse and branch circuit
fuses or circuit breaker. Repair as
necessary.
. Check all the wire connections to
fan and housing wiring. Repair as
necessary.
Caution! Make sure the main
10
Toll Free : 1-866-827-4985 model no. 052-8399-0
TROUBLESHOOTING
Problem
Fan does
not seem to
move much
air.
Fan wobbles
or shakes
excessively.
Possible reason
Solution
. Fan is in reverse (blades are moving in
clockwise direction).
. Counter-clockwise (forward) is
recommended in warm weather.
rotation to stop. Use the eraser end
of a pencil to change the forward/
reverse slide switch.
. Fan is not properly located.
. Place fan in the centre of the room
so there is at least 12" (30 cm)
between the end of the blades and
walls or other obstructions.
. Screws securing fan blade clips to motor
are loose.
. Make sure that screws which attach
fan blade clips to motor are fastened
and tightened.
. Tighten screws of fan blade to blade
clip securely.
. Ensure that canopy and mounting
bracket are tightened securely to
ceiling joist.
. Fan blade and its blade clip are not
fastened securely.
. Canopy and mounting bracket are not
tightened securely.
ENVIRONMENTAL PROTECTION
Discarded electrical appliances are recyclable and should not be discarded in your regular
domestic waste! Please actively support us in conserving resources and protecting the
environment by returning this appliance to a collection centre (if available).
Battery reclamation (please keep to comply with the local law).
11
Care of Your Fan
Here are some suggestions to help you maintain your fan.
1. Because of the fan's natural movement, some connections may become loose. Check the support
connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not
necessary to remove fan from ceiling.)
2. Clean your fan periodically to help main tain its new appearanceover the years. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to min imize discolouration
or tarnishing. Do not use water when cleaning. This could damage the motor, the wood, or possibly cause an
an electric shock.
3. You can apply a light coat of furniture polish to the wood blades for additional protection and enhanced
beauty. Cover small scratches with a light application of shoe polish.
4. There is no need to oil your fan. The motor has permanently lubricated sealed ball bearings.
Warranty
This product carries a limited ten (10) year warranty against defects in the motor, and a one (1) year
warranty against defects in workmanship and materials. Noma Canada agrees to replace the defective product
free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by
Noma Canada, Toronto, Canada M4S 2B8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising