Advertisement
Advertisement
SHDSL Network Extender 2020
SNE2020G-S, SNE2020G-P, SNE2020G-Kit1
Dual Port SHDSL Network Extender/CPE with Loop
Bonding
✓
Extends Ethernet services over simple twisted copper pairs using SHDSL
✓
Supports loop bonding over 2-pairs with selectable data rates up to
4.6 Mbps (symmetrical)
✓
Loop Bonded links have automatic failover and recovery for increased network resilience
✓
Minimizes truck rolls with
'Plug & Play' operation with NO configuration requirements
✓
Connects directly to any
10/100 Mbps Ethernet port on a PC or LAN
✓
Can be used with other
SNE's, EtherXtend CPE, the
SUD2011-12, or the
SMD2000-24 in point-to-point configurations
✓
Can be used with the
Zhone MALC, EtherXtend, or IPD4000E/12000E
IP-DSLAM products
The SNE2020G allows Carriers, ISPs and PTTs to deliver Ethernet services to virtually anywhere, using standard SHDSL circuits. The SNE2020G offers up to
4.6 Mbps of extremely reliable and efficient Ethernet service over the WAN, delivering the bandwidth required to support a sophisticated new generation of small and medium business customers.
The SNE2020G features two (2) SHDSL ports, each capable of up to 2.3 Mbps bandwidth, and can be connected directly to any 10/100 Mbps Ethernet port on a PC or LAN to extend Ethernet over simple twisted-wire pairs. The SNE2020G can be used in a point-to-point configuration with other SHDSL Network
Extenders as well as with EtherXtend Ethernet in the First Mile (EFM) CPE, or it can be used to terminate SHDSL lines from both Zhone's MALC Multi-service
Access Loop Carrier or the IPD4000E/12000E IP-DSLAM.
When used with a compatible product, one or two ports may be used to deliver high-speed bandwidth at any given distance. The loop bonding technology used is automatic, efficient and resilient, providing configuration-free deployment and a greater total throughput than traditional SHDSL lines.
Zhone's family of EFM based Network Extenders provide an extremely cost-effective, flexible and easy to use solution for providing Ethernet based services to subscribers throughout the service providers network. Ethernet over bonded SHDSL is ideal for delivering highly reliable and resilient. With the
SNE2020G rates of up to 4.6 Mbps are supported, and bonded groups are automatically created, removed and repaired, providing both ease of use as well as maximum uptime.
The SNE2020G is designed for ease-of-use; configuration requirements are removed completely, allowing this device to be installed into the customer premise quickly and cost-effectively. The SNE2020G is based on Ethernet transport technology over standard SHDSL lines, providing a 100%
Ethernet-based access technology for optimum usability, throughput and reliability.
Technical Specifications
Dimensions
■
1.25" x 5.5" x 4.5" (HxWxD)
■
3.2cm x 14cm x 11.5cm (HxWxD)
Weight
■ 0.6 lbs (0.28 kg)
Power
■
100-125VAC @ 0.15A
■
200-240VAC @ 0.08A
SHDSL Network Extender 2020
Interfaces
■
2 SHDSL Hybrid RJ11/RJ45
■
1 Ethernet RJ45
Standards Support
■ IEEE 802.3 Ethernet
■ ITU G.991.2 G.SHDSL
Bandwidth/Distance
■
Up to 2.3 Mbps per SDSL port (up to 4.6 Mbps
■ loop bonded)
Lower speeds supported up to 24,000 feet/7.3Km
Regulatory Compliance
■
EMC: FCC Part 15; CSA/C108.8; EN55022;
■
EN55024
Safety: UL1950, CSA C22.2 No. 950; EN60950
■
CE Marking
Operating Requirements
■ Temperature: 32ºF to 122ºF (0ºC to 50ºC)
■ Non-operating: -40ºF to 158ºF (-40ºC to 70ºC)
■ Humidity: 5% to 95%, non-condensing
■ Altitude: -200ft to 16,500ft (-60m to 5,000m)
Ordering Information
SHDSL Network Extenders - Single Units
SNE2020G-S-US 2-Port SHDSL Subscriber Unit for Loop Bonding with NA Power Supply
SNE2020G-S-EU
SNE2020G-S-UK
SNE2020G-P-US
SNE2020G-P-EU
2-Port SHDSL Subscriber Unit for Loop Bonding with EU Power Supply
2-Port SHDSL Subscriber Unit for Loop Bonding with UK Power Supply
2-Port SHDSL Provider for Loop Bonding with NA Power Supply
2-Port SHDSL Provider for Loop Bonding with EU Power Supply
2-Port SHDSL Provider for Loop Bonding with UK Power Supply SNE2020G-P-UK
SHDSL Network Extender Kits
SNE2020G-KIT1US
SNE2020G-KIT1EU
SNE2020G-KIT1UK
2-Port SHDSL Kit Includes (1) SNE2020G-P and (1) SNE2020G-S with NA Power Supplies
2-Port SHDSL Kit Includes (1) SNE2020G-P and (1) SNE2020G-S with EU Power Supplies
2-Port SHDSL Kit Includes (1) SNE2020G-P and (1) SNE2020G-S with UK Power Supplies
2009/04/28 11:45:42

Public link updated
The public link to your chat has been updated.
Advertisement