Dell Latitude 12-14 Rugged Dock - Precision Mounting Technologies

Dell Latitude 12-14 Rugged Dock - Precision Mounting Technologies
TrimLine Vehicle Dock For:
• Dell Latitude 14 Rugged
• Dell Latitude 12 Rugged Extreme
• Dell Latitude 14 Rugged Extreme
User Guide
Description
Part Number
LATITUDE RUGGED BASIC NPT DOCK
AS7.D900.200
LATITUDE RUGGED BASIC TPT (triple RF pass thru) DOCK
AS7.D900.203
LATITUDE RUGGED ADVANCED NPT DOCK
AS7.D900.100
LATITUDE RUGGED ADVANCED TPT (triple RF pass thru) DOCK
AS7.D900.103
www.precisionmounts.com
Description of Parts and Layout
Top View
RF pass thru
connectors (3)
(optional)
Docking Connector
Locating Pin (2)
Rear Clamp
Actuating Pin
Docking
Lever
Lock
Front Clamp (2)
Lifter Button (4)
Description of Parts Continued
Bottom View
Cable Tie Rail
Front Clamp (2)
Port Replicator
Front Clamp
Positioning
Holes
Description of Parts Continued
Port Layout
RF pass thru (3)
(optional)
-TNC style
connectors*
Power
20v dc
*SMA adapters available
USB 3.0 (3)
Ethernet
HDMI**
Serial (2)**
VGA**
**With Advanced port replication only
Description of Parts Continued
Port Layout Continued
Speaker
USB 2.0
Mic
Power Light
Adjusting the Front Clamps
Step 1:
Remove the two screws with a 1/8” hex
key/Allen wrench.
Step 2:
Position the front clamp as required.
Step 3:
Replace and tighten the two screws.
Step 4:
Repeat for the other front clamp.
Docking the Computer
Step 1:
Ensure rear clamp is in the open
position.
Step 2:
To open rear clamp
• Insert key, unlock, remove key
• Push docking lever in until it clicks
into position
Step 3:
Insert the computer front first into the
front clamps of the docking station,
carefully lower and align the
computer on the guide pins.
Front Clamps
Docking the Computer Continued
Step 4:
When the computer is properly aligned,
simultaneously push down on the rear
of the computer while pulling the
docking lever out
Step 5:
Confirm secure docking by pulling up on
the rear of the computer to ensure that
the rear clamp is fully engaged into the
computer. Computer should be held
solidly in place
Step 6:
For added security the dock can be
locked
• Insert key, lock, remove key
Removing the Computer From the Docking Station
Step 1:
Ensure dock is unlocked
• Insert key
• Unlock (key in horizontal orientation)
• Remove key
Step 2:
Simultaneously push docking lever in
while lifting the rear of the computer
Step 3:
Remove the computer by lifting and
sliding it out of the dock.
The dock should now in it’s “open”
configuration and ready for easy redocking of the computer.
Wiring/Cable Management
Connect all cables securely to dock
connections, and use tie straps to
secure cables to the cable tie rail.
Ensure to leave enough slack in
wires exiting dock so that any
positioning adjustments will not
strain the cables or connections.
Use tie straps to secure opposite
cable ends to another location in
the vehicle.
Wiring Tip:
PMT does not recommend relying on a cigarette socket adaptor for
powering vehicle docks. We recommend hard wiring using a good clean
ground direct from the vehicle battery (-) post, and (+) supply from a
fused 12v location also directly from the vehicle battery. All peripherals
connecting to the docking station should get power and ground from
the same location as the dock.
Visit www.precisionmounts.com/installation-instructions.html for a copy of our general wiring and
troubleshooting guide
Mounting
Once all cables and connections are made to the docking station, connect the
interface plate to the dock using the supplied #10-24 x ½” hardware. Depending
on the mounting infrastructure you are attaching to, you may need to attach
the interface plate to the mount first, then place the dock on top of the plate
and secure the dock to the plate.
The universal interface plate pictured above has many of the common
mounting hole patterns for mounts on the market today. Contacts us to learn
more about the many other mounting options available.
For more info visit: www.precisionmounts.com
Or call us at 1-888-869-7652
info@precisionmounts.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising