1 GHz Spectrum Analyzer HM5511

1 GHz Spectrum Analyzer HM5511
1 GHz Spectrum Analyzer
HM5511
NEW
Frequency range: 150 kHz to 1 GHz
Unmodulated RF signal
Amplitude measurement range: – 100 dBm to + 10 dBm
Phase Synchronous, Direct Digital frequency Synthesis (DDS)
Resolution bandwidths (RBW): 20 kHz and 500 kHz
Amplitude-modulated
RF signal
Keypad for frequency and amplitude setting
Analog signal processing and display
Tracking Generator with output amplitude of – 50 dBm to + 0 dBm
Amplifier frequency response measured using a
tracking generator
1 GHz Spectrum Analyzer HM5511
Valid at 23 °C after a 30 minute warm-up period
Frequency Characteristics
Frequency Range:
0.15 MHz to 1.050 GHz
Stability:
±5 ppm
Ageing:
±1 ppm/year
Frequency Resolution:
1 kHz (6 1 2 -digit in readout)
Center Frequency Range:
0 to 1.050 GHz
LO Frequency Generation:
TCXO with DDS (Digital Frequency Synthesis)
Span Setting Range:
Zero-Span and 1 MHz – 1000 MHz
(1-2-5 Sequence)
Marker:
Frequency Resolution:
1 kHz, 6 1 2 digit,
Amplitude Resolution:
0.5 dB, 3 1 2 digit
Resolution Bandwidths
(RBW) @ 3dB:
500 kHz and 20 kHz
Video filter (VBW):
4 kHz
Sweep Time:
20 ms
Amplitude Characteristics (Marker Related) 150 kHz – 1 GHz
Measurement Range:
–100 dBm to +10 dBm
Scaling:
10 dB/div.
Display Range:
80 dB (10dB/div.)
Amplitude Frequency Response (at 10 dB Attn., Zero Span and RBW
500 kHz, Signal – 20 dBm): ±3 dB
Display (CRT):
8 x 10 division
Amplitude Scale:
logarithmic
Display Units:
dBm
Parameter Display (LCD):
20 Characters per Line, Center Frequency, Span,
Marker Frequency, Reference Level, Marker Level
Input Attenuator Range:
0 - 40 dB (10 dB increments)
Input Attenuator Accuracy
rel. to 10 dB:
±2 dB
Max. Input Level (continuous)
10 - 40 dB attenuation:
+20 dBm (0.1 W)
0 dB attenuation:
+10 dBm
Max. DC Voltage:
±25 V
Max. Reference Level:
+10 dBm
Reference Level Accuracy rel. to 500 MHz, 10 dB Attn., Zero Span and
RBW 500 kHz:
±1 dB
Min. Average Noise Level:
approx. –100 dBm (RBW 20 kHz)
Intermodulation Ratio
typical › 75 dBc (2 Signals: 200 MHz ,
(3rd Order):
203 MHz, – 3 dB below Reference Level)
Harmonic Distortion Ratio
(2nd harm.):
typical › 75 dBc (200 MHz, Reference Level)
Bandwidth Dependent Amplitude Error rel. to RBW 500 kHz and Zero
Span:
±1 dB
Inputs / Outputs
Measurement Input:
Input Impedance:
VSWR: (Attn. ≥ 10 dB)
Supply Voltage
for Probes (HZ530):
Audio output (phone):
Functions
Keyboard Input:
Rotary Encoder Input:
Tracking Generator
Frequency Range:
Output Level:
Frequency response
0 dBm to -9.5 dBm
-10 dBm to -50 dBm
Spurious Outputs:
General information
CRT:
Acceleration Voltage:
Trace Rotation:
Ambient Temperature:
Power Supply:
Power Consumption:
Safety class:
Dimensions (W x H x D):
Color:
Weight:
N-socket
50 Ω
typ. 1.5 : 1
6 V DC
3.5 mm Ø jack
Center Frequency, Reference and
Tracking Generator Level
Center Frequency, Reference and
Tracking Generator Level, Marker,
Intensity (CRT), Contrast (LCD),
0.15 MHz – 1.050 GHz
–50 dBm to 0 dBm
± 4 dB
± 3 dB
better than 20 dBc
D14-363GY, 8 x 10 cm with internal graticule
approx. 2 kV
adjustable on front panel
+10° C to +40° C
105 - 253 V, 50/60 Hz ± 10 %, CAT II
approx. 35 W at 230 V/50 Hz
Safety class I (EN61010-1)
285 x 125 x 380 mm,
with adjustable, lockable tilt handle
techno-brown
approx. 6.0 kg
Accessories supplied: Line Cord, Operators Manual
Optional accessories: Antenna HZ520, Near Field Probe Set for EMI Diagnosis
HZ530
w w w. h a m e g . co m
HM5511E/310505/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · [email protected]
A Rohde & Schwarz Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement