HPE OfficeConnect 1420 Switch Series

HPE OfficeConnect 1420 Switch Series
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
HPE OfficeConnect 1420 Switch Series
Models
HPE OfficeConnect 1420 16G Switch
HPE OfficeConnect 1420 24G 2SFP Switch
HPE OfficeConnect 1420 24G 2SFP+ Switch
HPE OfficeConnect 1420 24G PoE+ (124W) Switch
HPE OfficeConnect 1420 5G Switch
HPE OfficeConnect 1420 5G PoE+ (32W) Switch
HPE OfficeConnect 1420 8G Switch
HPE OfficeConnect 1420 8G PoE+ (64W) Switch
HPE OfficeConnect 1420 24G Switch
JH016A
JH017A
JH018A
JH019A
JH327A
JH328A
JH329A
JH330A
JG708B
Key features
Unmanaged plug-and-play Gigabit Ethernet switching
Green features for low power consumption
Fanless design for silent operation
Quality of Service capabilities for improved network efficiency
Limited lifetime warranty
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 1
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
Product overview
The HPE OfficeConnect 1420 Switch Series consists of unmanaged Gigabit Ethernet switches, for small
business and others looking for plug-and-play basic Layer 2 connectivity for their network, including lowcost PoE+ and 10-Gigabit uplink models.
The HPE OfficeConnect 1420 Switch Series includes nine Gigabit switches. All have 10/100/1000 ports for
affordable Gigabit connections using copper Cat 5e cabling. There is a 16-port RJ45-only model. There is a
24-port model with two SFP Gigabit ports, ideal where long distances require fiber-based connections.
Another 24-port model supports IEEE 802.3at PoE+ on 12 of its ports, able to forward up to 30 W power on
these ports to power access points, IP phones, IP cameras, and other PoE-enabled devices. For costeffective high-speed fiber-based server connections, there is a 24-port 10/100/1000 switch with two SFP+
10-Gigabit ports.
HPE OfficeConnect 1420 switches have quality of service (QoS) support and IEEE 802.3x flow control
features that improve network efficiency. Simplified plug-and-play convenience is supported by features
such as auto-MDIX and auto-speed negotiation. Hewlett Packard Enterprise has innovated and combined
the latest advances in silicon technology to bring you some of the most power-efficient switches. All models
support the Energy Efficient Ethernet IEEE 802.3az standard, as well as auto power-down mode on idle
ports and power saving on short-distance cables. With their fanless silent operation, these switches are
ideal for office deployment. HPE OfficeConnect 1420 switches come with a limited lifetime warranty
covering the unit and power supplies.
Features and benefits
Ease of use
Unmanaged
provides plug-and-play simplicity
Auto-speed negotiation
selects individual port speed automatically, depending on client capabilities; removing the need for
manual intervention enables simple plug-and-play operation
Comprehensive LED display with per-port indicators
provides an at-a-glance view of the status, activity, speed, and full-duplex operation of the switches
Flow control
helps ensure reliable communications during full-duplex operation
HPE/IEEE Auto-MDIX
automatically adjusts for straight-through or crossover cables on all RJ-45 ports
Connectivity
Gigabit Ethernet 10/100/1000 Connectivity
supports high-speed Ethernet connections over highly affordable copper Category 5 cabling.
10-Gigabit fiber connectivity
Future-proof 10-Gigabit technology allows high-speed fiber connection to servers or other switches,
with connection flexibility using optional SFP+ or SFP transceivers.
IEEE 802.3at Power over Ethernet (PoE+)
provides up to 30 W per port, which allows support of the latest PoE+-capable devices such as IP
phones, wireless access points, and security cameras, as well as any IEEE 802.3af compliant end
device; reduces the cost of additional electrical cabling and circuits that would otherwise be necessary
in IP phone and WLAN deployments (for PoE model)
Performance
Energy-efficient Ethernet support
supports new IEEE 802.3az standard; and allows lower power consumption, when operated with
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 2
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
IEEE-compliant client devices in 100 Mb/s mode only
Half-/full-duplex auto-negotiating capability on every port
doubles the throughput of every port.
Jumbo frame support
allows frames up to 9,216 bytes to be switched through the network
Flexibility
Fanless design
enables quiet operation for deployment in open spaces
Internal power supply
delivers operational convenience and an environment suitable for business operations
Quality of Service (QoS)
IEEE 802.1p prioritization
delivers data to devices, based on the priority and type of traffic
DiffServ Code Point (DSCP) support
allows real-time traffic prioritization, based on L3 TOS/DSCP parameters
Warranty and support
Limited Lifetime Warranty
HPE OfficeConnect 1420 Switch Series includes a Limited Lifetime Warranty. This warranty provides
advance hardware replacement with next business day shipment in most countries, limited 24x7
telephone support available from HPE for the first 90 days, and limited electronic and business hours
telephone support is available from HPE for the entire warranty period
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 3
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not
part of a CTO or Rack-Shippable solution.
HPE OfficeConnect 1420 24G Switch
24 RJ-45 autosensing 10/100/1000 ports
1U - Height
JG708B
See
Configuration
NOTE:3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG708B#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JG708B#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG708B#B2E
HPE OfficeConnect 1420 5G Switch
5 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH327A
See
Configuration
NOTE:3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH327A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH327A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH327A#B2E
HPE OfficeConnect 1420 5G PoE+ (32W) Switch
5 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH328A
See
Configuration
NOTE:3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH328A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH328A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH328A#B2E
HPE OfficeConnect 1420 8G Switch
8 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH329A
See
Configuration
NOTE: 3
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 4
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH329A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH329A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH329A#B2E
HPE OfficeConnect 1420 8G PoE+ (64W) Switch
8 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH330A
See
Configuration
NOTE: 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH330A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH330A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH330A#B2E
HPE OfficeConnect 1420 16G Switch
16 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH016A
See
Configuration
NOTE: 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH016A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH016A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH016A#B2E
HPE OfficeConnect 1420 24G 2SFP Switch
24 RJ-45 autosensing 10/100/1000 ports
2 SFP 100/1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
JH017A
See
Configuration
NOTE:1, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH017A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH017A#B2C
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 5
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH017A#B2E
HPE OfficeConnect 1420 24G 2SFP+ Switch
24 RJ-45 autosensing 10/100/1000 ports
2 fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
1U - Height
JH018A
See
Configuration
NOTE: 1, 2
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH018A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH018A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH018A#B2E
HPE OfficeConnect 1420 24G PoE+ (124W) Switch
24 RJ-45 autosensing 10/100/1000 ports
1U - Height
JH019A
See
Configuration
NOTE: 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JH019A#B2B
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (ROW)
JH019A#B2C
High Volt Switch/Router to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JH019A#B2E
Configuration Rules:
Note 1
Note 2
Note 3
The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
J4858C
J4859C
J8177C
JD089B
JD118B
JD119B
The following Transceivers install into this switch:
HPE X132 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9150A
JD092B
JD094B
J9281B
J9283B
Localization (Wall Power Cord) required on orders without #B2B, #B2C
(PDU Power Cord) or #B2E. (See Localization Menu)
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 6
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
J4858C
J4859C
J8177C
JD089B
JD118B
JD119B
SFP+ Transceivers
HPE X132 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9150A
JD092B
JD094B
J9281B
J9283B
Internal or External Power Supplies (Model Dependant)
Power Supplies included
Cables
Multi-Mode Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 7
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
HPE OfficeConnect 1420 16G Switch (JH016A)
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 16 autosensing 10/100/1000 ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Reliability
Environment
Electrical
characteristics
Dimensions
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U
height)
Weight
2.65 lb (1.2 kg)
1 MB flash; Packet buffer size: 512 KB
Mounts in an EIA standard 19-inch telco rack (hardware included); Wall, desktop
and under-table mounting
100 Mb Latency
< 8 µs (LIFO 64-byte packets)
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 23.8 Mpps (64-byte packets)
Switching capacity
32 Gbps
MAC address table
8192 entries
size
MTBF (years)
153.3
Operating
32°F to 104°F (0°C to 40°C)
temperature
Operating relative
5% to 95%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.2 A
Maximum power
12 W
rating
Maximum power rating and maximum heat dissipation are the worstNotes
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 8
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
Services
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-3-2
IEC 61000-3-3
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G 2SFP Switch (JH017A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Reliability
Environment
Electrical
characteristics
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U
height)
Weight
4.85 lb (2.2 kg)
1 MB flash; Packet buffer size: 512 KB
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop
mounting
100 Mb Latency
< 8 µs (LIFO 64-byte packets)
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 38.7 Mpps (64-byte packets)
Switching capacity
52 Gbps
MAC address table
8192 entries
size
MTBF (years)
126.1
Operating
32°F to 104°F (0°C to 40°C)
temperature
Operating relative
5% to 95%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.3 A
Maximum power
18 W
rating
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 9
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
Services
Use only supported genuine HPE transceivers with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G 2SFP+ Switch (JH018A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed 1000/10000 SFP+ ports
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP+ ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Reliability
Environment
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U
height)
Weight
6.39 lb (2.9 kg)
8 MB flash; Packet buffer size: 1.5 MB
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop
mounting
100 Mb Latency
< 8 µs (LIFO 64-byte packets)
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
10 Gbps Latency
< 2 µs (LIFO 64-byte packets)
Throughput
up to 65.5 Mpps (64-byte packets)
Switching capacity
88 Gbps
MAC address table
16384 entries
size
MTBF (years)
109.4
Operating
32°F to 104°F (0°C to 40°C)
temperature
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 10
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Electrical
characteristics
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Frequency
Voltage
Current
Maximum power
rating
Notes
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Power: 0 dB No fan
50/60 Hz
100 - 240 VAC, rated
0.4 A
21 W
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
Services
Use only supported genuine HPE transceivers with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G PoE+ (124W) Switch (JH019A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical
characteristics
Memory and
processor
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U
height)
Weight
7.28 lb (3.3 kg)
1 MB flash; Packet buffer size: 512 KB
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 11
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Mounting and
enclosure
Performance
Reliability
Environment
Electrical
characteristics
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop
mounting
100 Mb Latency
< 8 µs (LIFO 64-byte packets)
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 35.7 Mpps (64-byte packets)
Switching capacity
48 Gbps
MAC address table
8192 entries
size
MTBF (years)
69.9
Operating
32°F to 104°F (0°C to 40°C)
temperature
Operating relative
5% to 95%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.3/1.8 A
Maximum power
160 W
rating
PoE power
124 W PoE+
Maximum power rating and maximum heat dissipation are the worstNotes
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
This product provides PoE or PoE+ power across 12 of 24 ports, with a
total power budget of 124W. This model is designed with internal power
supply. Please select the correct power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 12
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Flicker
Services
IEC 61000-3-3
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 5G Switch (JH327A)
5 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Environment
Electrical
characteristics
Safety
Emissions
Immunity
Dimensions
4.52(w) x 3.18(d) x 1.06(h) in (11.48 x 8.08 x 2.69 cm)
Weight
0.66 lb (0.3 kg)
Packet buffer size: 1 Mb
Desktop (rear port)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
MAC address table
size
Operating
temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Frequency
Voltage
Maximum power
rating
Notes
< 3 μs
< 2.6 μs
up to 7.4 Mpps
10 Gbps
2048 entries
32°F to 104°F (0°C to 40°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95%, noncondensing
Fanless
50/60 Hz
100 - 240 VAC, rated
3.0 W
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 13
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
Services
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-3-2
IEC 61000-3-3
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 5G POE+ (32W) Switch (JH328A)
5 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Environment
Electrical
characteristics
Dimensions
6.21(w) x 4.13(d) x 1.06(h) in (15.77 x 10.49 x 2.69 cm)
Weight
1.10 lb (0.5 kg)
Packet buffer size: 1 Mb
Desktop (rear port)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
MAC address table
size
Operating
temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Frequency
Voltage
Maximum power
rating
Notes
< 3 μs
< 2.6 μs
up to 7.4 Mpps
10 Gbps
2048 entries
32°F to 104°F (0°C to 40°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95%, noncondensing
Fanless
50/60 Hz
100 - 240 VAC, rated
Powered by PoE
40 W
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 14
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power
supplied by External Power Supply (EPS). This product provides PoE
or PoE+ power across 4 of 5 ports, with a total power budget of 32W.
Please select the correct power cord country option.
Safety
Emissions
Immunity
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 8G Switch (JH329A)
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Environment
Dimensions
6.21(w) x 4.13(d) x 1.06(h) in (15.77 x 10.49 x 2.69 cm)
Weight
1.10 lb (0.5 kg)
Packet buffer size: 1.5 Mb
Desktop (rear port)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
MAC address table
size
Operating
temperature
Operating relative
humidity
Nonoperating/Storage
temperature
< 3 μs
< 2.6 μs
up to 11.8 Mpps
16 Gbps
4096 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 15
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Immunity
Services
Nonoperating/Storage
relative humidity
Acoustic
Frequency
Voltage
Maximum power
rating
Notes
15% to 95% @ 104°F (40°C), noncondensing
Fanless
50/60 Hz
100 - 240 VAC, rated
4.5 W
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
EN 60950/IEC 60950; UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1-03
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 8G PoE+ (64W) Switch (JH330A)
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Dimensions
9.24(w) x 4.13(d) x 1.06(h) in (23.47 x 10.49 x 2.69 cm)
Weight
1.54 lb (0.7 kg)
Packet buffer size: 1.5 Mb
Desktop (rear port)
100 Mb Latency
1000 Mb Latency
Throughput
< 3 μs
< 2.6 μs
up to 11.8 Mpps
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 16
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Environment
Electrical
characteristics
Routing/Switching
capacity
MAC address table
size
Operating
temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Frequency
Voltage
Maximum power
rating
PoE power
Notes
16 Gbps
4096 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 104°F (40°C), noncondensing
up to 10,000 ft (3 km)
Fanless
50/60 Hz
100 - 240 VAC, rated
80 W
64 W PoE+
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power
supplied by External Power Supply (EPS). This product provides PoE
or PoE+ power across all 8 ports, with a total power budget of 64W.
Please select the correct power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 17
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
HPE OfficeConnect 1420 24G Switch (JG708B)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical
characteristics
Memory and
processor
Mounting and
enclosure
Performance
Environment
Electrical
characteristics
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U
height)
Weight
6.61 lb (3 kg)
1 MB flash; Packet buffer size: 512 KB
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop
mounting
100 Mb Latency
< 8.0 μs (LIFO 64-byte packets)
1000 Mb Latency
< 16 μs (LIFO 64-byte packets)
Throughput
up to 35.7 Mpps (64-byte packets)
Switching capacity
48 Gbps
MAC address table
8192 entries
size
Operating
32°F to 104°F (0°C to 40°C)
temperature
Operating relative
5% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Frequency
50/60 Hz
Maximum heat
55 BTU/hr (58 kJ/hr)
dissipation
Voltage
100 - 240 VAC, rated
Current
0.3 A
Maximum power
16 W
rating
Maximum power rating and maximum heat dissipation are the worstNotes
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
power cord country option.
Safety
Emissions
Immunity
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 18
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Surge
Conducted
Power frequency
magnetic field
Voltage dips and
interruptions
Harmonics
Flicker
Notes
Services
Standards and
protocols
(applies to all
products in series)
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-3-2
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A),
HPE OfficeConnect 1410 16 Switch (J9662A) and HPE OfficeConnect 1410 24 Switch (J9663A)
Switches.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
General protocols
IEEE 802.1p Priority
IEEE 802.3ab 1000BASE-T
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3i 10BASE-T Ethernet over twisted pair
IEEE 802.3u 100BASE-TX Fast Ethernet, 100BASE-FX with autonegotiation
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X Gigabit Ethernet over fiber
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 19
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessories
HPE OfficeConnect
1420 Switch Series
accessories
Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic
Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
HPE OfficeConnect 1420 24G 2SFP Switch (JH017A)
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
J4858C
J4859C
J8177C
JD089B
JD118B
JD119B
HPE OfficeConnect 1420 24G 2SFP+ Switch (JH018A)
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X132 10G SFP+ LC SR Transceiver
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE X120 1G SFP RJ45 T Transceiver
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable
HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable
J4858C
J4859C
J8177C
J9150A
J9281B
J9283B
JD089B
JD092B
JD094B
JD118B
JD119B
JH234A
JH235A
HPE OfficeConnect 1420 5G Switch (JH327A)
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ835A
AJ836A
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
Page 20
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessories
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic
Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE OfficeConnect 1420 5G POE+ (32W) Switch (JH328A)
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic
Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HPE OfficeConnect 1420 8G Switch (JH329A)
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic
Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
HPE OfficeConnect 1420 8G PoE+ (64W) Switch (JH330A)
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 21
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessories
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic
Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic
Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 22
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time
of publication.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 0.5m 1Pack Fiber Optic Cable
(AJ833A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500
MHz-km @850/1300nm. VCSEL Laser sources: 600 /
600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber and designed to work
in both the 850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 23
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 1.0m 1Pack Fiber Optic Cable
(AJ834A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 24
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 2.0m 1Pack Fiber Optic Cable
(AJ835A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 25
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 5.0m 1Pack Fiber Optic Cable
(AJ836A)
Notes
Services
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 26
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 15.0m 1Pack Fiber Optic Cable
(AJ837A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 27
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 30.0m 1Pack Fiber Optic Cable
(AJ838A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 28
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 50.0m 1Pack Fiber Optic Cable
(AJ839A)
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding
diameter: 125 ± 2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500
MHz-km @850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve
600 / 600 meters @850/1300nm for Gigabit Ethernet
compliant links.
CABLE: The cable is duplex zipcord graded index
50/125um multimode optical fiber. The cable is designed
to work in both the 850 and 1300 nm wavelength
windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source,
0.003 dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0
dB/Km @ 1310 nm @ 23°C as tested in accordance with
EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 29
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 30
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 31
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
Bandwidth: 3000 MHz-km @ 850nm (Laser)
Jacket Color: Blue
Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
Boot Color: White
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 32
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
HPE X121 1G SFP LC Ports
SX Transceiver (J4858C) Physical
characteristics
A small form-factor
pluggable (SFP) Gigabit
SX
transceiver that provides Environment
a full-duplex Gigabit
solution
up to 550 m on
multimode fiber.
Electrical
characteristics
Cabling
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22
cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to
85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter,
graded-index, low metal content, multimode fiber optic,
complying with ITU-T G.651 and ISO/IEC 793-2 Type
A1b or A1a, respectively;
Maximum distance:
Services
HPE X121 1G SFP LC Ports
LX Transceiver (J4859C)
Physical
HP X121 1G SFP LC LX
characteristics
Transceiver: An SFP
format
gigabit transceiver with Environment
LC connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX);
Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x
1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to
100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125
µm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T
G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Low metal content, single-mode fiber-optic, complying
with ITU-T G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 33
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
Notes
Services
2-550 m (multimode 62.5 µm core diameter, 500
MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some
multimode fiber installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services and response times in your area, please
contact your local Hewlett Packard Enterprise sales office.
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 34
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Summary of Changes
Date
10-June-2016
06-Jun-2016
Version History
From Version 5 to 6
From Version 4 to 5
Action
Changed
Added
15-Apr-2016
From Version 3 to 4
Changed
31-Mar-2016
From Version 2 to 3
01-Dec-2015
From Version 1 to 2
Added
Changed
Changed
Description of Change
Minor edits made on Technical Specifications.
Models added: JH327A, JH328A, JH329A,
JH330A
QS name changed to HPE OfficeConnect 1420
Switch Series; SKU descriptions updated
Models added: JG708B
Product overview updated
Overview, Features and Benefits and Technical
Specifications updated.
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information
contained herein is subject to change without notice. The only warranties for Hewlett
Packard Enterprise products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. Hewlett Packard Enterprise shall not
be liable for technical or editorial errors or omissions contained herein.
To learn more, visit: http://www.hpe.com/networking
c04609036 - 15249 - Worldwide - V6 - 10-June-2016
DA - 15249 Worldwide QuickSpecs — Version 6 — 6.10.2016
Page 35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising