Cisco | HDD-7845-I2-72= | Datasheet | Cisco Spare 72.3-GB hot-plug SAS drive for MCS 7845-I2

Cisco Spare 72.3-GB hot-plug SAS drive for MCS 7845-I2
Data Sheet
Cisco MCS 7845-I2
Cisco Unified Communications Solutions unify voice, video, data, and mobile applications
on fixed and mobile networks enabling easy collaboration every time from any workspace.
The Cisco MCS 7845-I2 Media Convergence Server is a high-availability server platform for Cisco
Unified Communications Solutions. An integral part of a complete, scalable architecture for a new
generation of high-quality IP voice solutions that run on enterprise data networks, the Cisco MCS
7845-I2 delivers the high performance and availability demanded by today’s enterprise networks
— and it is easy to deploy and highly cost-effective. At only 2 rack units (2RUs) high, the Cisco
MCS 7845-I2 offers tremendous power in a low-profile chassis that minimizes rack space.
Supported Applications
The Cisco MCS 7845-I2 can run any of the following Cisco applications:
●
Cisco Unified Application Environment
●
Cisco Unified Communications Manager (formerly known as Cisco Unified CallManager):Up
to 7,500 Cisco Unified IP phones per server
●
Cisco Emergency Reporter: Up to 30,000 Cisco Unified IP Phones per server
●
Cisco Unified Presence
●
Cisco Unified Intelligent Contact Management Enterprise
●
Cisco Unified Intelligent Contact Management Hosted
●
Cisco Unified Contact Center Enterprise
●
Cisco Unified Contact Center Hosted
●
Cisco Unified Contact Center Express
●
Cisco Unified Expert Advisor
●
Cisco Unified IP IVR
●
Cisco Unified Customer Voice Portal
●
Cisco Unified MeetingPlace conferencing
●
Cisco Unified MeetingPlace Express
●
Cisco Unified IP Queue Manager
●
Cisco Unity unified messaging
®
®
Key Features and Benefits
Performance
The Cisco MCS 7845-I2 is a robust, highly available server platform designed to support today’s
unified communications applications. It includes such innovations as variable-speed fan support,
NetBAY cabling support, Light Path Diagnostics, and Chipkill memory support. The Cisco MCS
7845-I2 occupies only 2RU rack space while providing the features most requested in a highavailability server platform.
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
Data Sheet
High Availability
High availability on the Cisco MCS 7845-I2 is achieved through the following mechanisms:
●
Redundant hot-swap 835W power supplies
●
Hot-swap SAS hard drives configured using Redundant Array of Independent Disks (RAID)
1
●
Redundant hot-swap fans
Memory
The Cisco MCS 7845-I2 supports up to 48 GB of double-data-rate 2 (DDR2) memory. The
increased processor performance coupled with DDR memory allows you to retrieve and process
information fast and efficiently. DDR memory executes twice the number of operations per cycle
than traditional synchronous dynamic RAM (SDRAM) memory, effectively doubling the data
exchange rate between memory and processors.
Variable-Speed Fan Support
The Cisco MCS 7845-I2 includes variable-speed fans to reduce operating noise. Through the use
of temperature sensors within the server, the speed of the fans is adjusted to maintain the proper
cooling, reducing the noise generated by the fans by operating them only when required and at a
speed based upon the cooling requirements.
Advanced Connectivity Technology
The Cisco MCS 7845-I2 supports IBM’s new NetBAY Advanced Connectivity Technology products
that help reduce Keyboard/Video/Mouse (KVM) costs by linking administrators’ chain systems
together with Category 5 cable. In addition to reducing overall costs, Advanced Connectivity
Technology reduces bulk cable clutter, making servers accessible and serviceable in the rack.
Serviceability
Light Path Diagnostics
The Cisco MCS 7845-I2 is equipped with Light Path Diagnostics, which provides a central
information LED panel (visible without removing the cover) and individual LED lights throughout
the system on items such as memory dual in-line memory modules (DIMMs), Peripheral
Component Interconnect (PCI) slots, power supplies, and CPUs. IT can quickly view system
status, and service personnel can pinpoint a specific failing component, helping reduce downtime
and service costs. This capability provides increased availability, because nontechnical personnel
can report error conditions without removing the top cover and exposing vital components to
further risk. If the system error LED on the front of the server is on, one or more LEDs inside the
server or on the power supply will be on. These LEDs will help identify and locate problems with
some server components. By following the path of lights, you can quickly identify the type of
system error that occurred. The Cisco MCS 7845-I2 is designed so that any LEDs that are
illuminated remain illuminated when the server shuts down as long as the AC power source is
good and the power supply can provide +5 VDC to the server.
Light Path Diagnostics provide indication of failures for the following conditions:
●
One or both power supplies consuming power higher than maximum rating
●
Power supply 1 failure
●
Power supply 2 failure
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
Data Sheet
●
Error on voltage regulator module
●
Failure of one or both processors
●
Hardware configuration error
●
Memory error
●
Nonmaskable interrupt
●
Error on the system board
●
Service processor failure
●
Error on adapter on PCI-X slots A, B, or C
●
Hard disk error
●
Fan failure or slow operation
●
System temperature exceeded maximum rating
●
Soft error
●
RAID controller error
Remote Management
The RSA II SlimLine adds accelerated graphics and delivers advanced control and monitoring
features to manage your Cisco MCS 7845-I2 at virtually any time, from virtually any place. You can
add the adapter card to the server through a connector that connects to the planar. This adapter
enables easy console redirection with text and graphics, and keyboard and mouse (operating
system must support universal serial bus [USB]) support over the system management LAN
connections. With video compression now built into the adapter hardware, it is designed to allow
the greater screen sizes and refresh rates that are becoming standard in the marketplace. This
feature allows you to display server activities from power-on to full operation remotely, with remote
user interaction at virtually any time. The embedded Web server provides remote control from any
standard Web browser. No additional software is required on the remote administrator’s
workstation. For those users who are accustomed to a command-line interface (CLI), the
administrator can also use the provided CLI from a Telnet session to perform some of the
functions that they can perform from the Web server. The Remote Supervisor Adapter II SlimLine
provides remote management and control of the system independent of the server status, in many
cases even if the server is powered off or otherwise disabled.
Features and benefits follow:
●
The adapter continuously monitors system environmentals (temperatures and voltages),
operating system status, and critical system components, such as processors, voltage
regulator modules (VRMs), memory, fans, power supplies, and power backplanes (where
supported by the system).
●
Video compression hardware is built in, eliminating drivers.
●
Faster graphics support makes monitoring and control more efficient.
●
RSA II SlimLine supports Secure Sockets Layer (SSL) and Lightweight Directory Access
Protocol (LDAP).
●
The adapter is integrated with IBM Director and Director Agent.
●
Built-in LAN and serial connectivity supports virtually any network infrastructure.
●
Multiple alerting functions warn systems administrators of potential problems, over e-mail,
pager support, LAN, or Simple Network Management Protocol (SNMP).
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
Data Sheet
●
The adapter installs on the system planar using a dedicated connector, and eliminates the
need to take a PCI-X slot.
The RSA II SlimLine features are similar to the RSA II with the exception of the following features:
●
The reset button is not accessible from the back of the system.
●
A mini-USB cable is no longer required; the device uses an internal USB bus. The system
has a designated systems management Ethernet port, activated only when RSA II SlimLine
is installed.
●
An external AC adapter is not required (the device uses standby power from system power
supplies).
●
Status LEDs are not externally viewable.
●
The RSA II SlimLine no longer supports the prior RSA II interconnect function.
Tape Drive Support
The Cisco MCS 7835-I1 can support an optional 36/72-GB USB external Digital Audio Tape (DAT)
drive (part number DAT-USB-EXT-72=) or an optional USB rack-mount DAT drive (part number
DAT-USB-RM-72=). This tape drive connects through one of the USB 2.0 ports provided by the
Cisco MCS 7845-I2.
Product Specifications
Tables 1 and 2 list the configurations of the Cisco MCS 7845-I2.
Table 1.
Currently Shipping Configuration
Component
Value
Product part number
MCS-7845-I2-CCE2
MCS-7845-I2-CCX2
MCS-7845-I2-IPC2
MCS-7845-I2-RC2
MCS-7845-I2-S31
Preload
None
OS included
None
Processor
Dual Intel 5140 2.33-GHz 4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Component
Value
Product part number
MCS-7845-I2-ECS3
MCS-7845-I2-CCE3
Preload
None
OS included
None
Processor
Dual Intel E5345 2.33-GHz 2x4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Four 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Component
Value
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Data Sheet
Product part number
MCS-7845-I2-ECS4
MCS-7845-I2-CCE4
Preload
None
OS Included
None
Processor
Dual Intel E5345 2.33-GHz 2x4M L2
Memory
4-GB (four 1-GB) PC2-5300R
Hard disks
Eight 146-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Table 2.
Previous Shipping Configuration
Component
Value
Product part number
MCS-7845-I2-CCE1
MCS-7845-I2-CCX1
MCS-7845-I2-ECS2
MCS-7845-I2-IPC1
MCS-7845-I2-RC1
MCS-7845-I2-UC1
Preload
None
OS included
None
Processor
Dual Intel 5140 2.33-GHz 4M L2
Memory
2-GB (two 1-GB) PC2-5300R
Hard disks
Four 72-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Component
Value
Product part number
MCS-7845-I2-ECS1
Preload
None
OS included
None
Processor
Dual Intel 5140 2.33-GHz 4M L2
Memory
2-GB (two 1-GB) PC2-5300R
Hard disks
Eight 72-GB SAS 2.5-in. hot-swap
Remote management
IBM RSA II Slimline
Tables 3 through 10 give specifications of the Cisco MCS 7845-H2.
Table 3.
Processor Specifications
Maximum processors
2
Processors installed
2
Basic input/output system (BIOS) type
Flash
Table 4.
Memory Specifications
Memory maximum
48 GB
Memory bus clock
667 MHz
Memory technology
PC2-5300 667-MHz DDR2 SDRAM
Multibit error mitigation
Advanced Error Checking and Correcting (AECC)
Total RAM slots
12
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
Data Sheet
Table 5.
RAID Controller Specifications
Controller model
IBM mezzanine ServeRAID-8k controller
Interface
Connect to motherboard
Cache
256 MB
Battery-backed write cache
Yes
RAID levels supported
1
Table 6.
Hard Disk Specifications
Hot-swappable bays
8
Hard disk interface type
SAS
Hard disk revolutions per minute (RPM)
10,000
Hard disk average seek time
4 ms
Data transfer rate
300 MB per second
Table 7.
Network Interface Specifications
Ethernet network interface card (NIC)
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 unshielded twisted pair (UTP) (2 or 4 pair) up to 328
ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft
(100m)
Table 8.
Interface Port Specifications
Serial ports
1
Parallel ports
0
USB 2.0 ports
7
Keyboard ports
Use one of the USB ports (PS/2 ports are not provided)
Mouse ports
Use one of the USB ports (PS/2 ports are not provided)
Audio ports
None
Video Graphics Array (VGA) ports
1 front and 1 back
System management ports
RJ-45 for IBM RSA2 dedicated Ethernet port
Security capabilities of the Cisco MCS 7845-I2 follow:
● Power-on password and privileged access password functions control access to the data and server setup program on the
server.
● Set unattended boot mode allows the system keyboard to be locked to all entries except the password, and at the same
time allows other computers on the network to access the system disk drive.
● A selectable boot sequence can be used to prevent unauthorized installation of software or removal of data from the
diskette drive.
The Cisco MCS 7845-I2 meets the following standards compliances.
● Multiprocessor Specification (MPS) 1.4
● PCI specification 2.3
● PCI-X specification V2.0a
● Hardware enabled to meet the International Organization for Standardization (ISO) 9241, Part 3 standard
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Data Sheet
Table 9.
Expansion Options and Interfaces
Expansion Options
8x PCIe non-hot plug slots
Table 10.
2
System Unit Specifications
Dimensions (H x W x D)
3.36 x 17.5 x 27.5 in.
8.54 x 44.36 x 69.8 cm
Weight (maximum)
65 lb
29.6 kg
Input requirements
(per power supply)
Rated line voltage
100–127 VAC and 200–240 VAC
Rated input current
10A (100 VAC), 10A (120 VAC),
and 5A (200 VAC)
Rated input frequency
50–60 Hz
BTU rating (maximum)
BTU/hr
3390
Power supply output power
Rated steady-state power
835W
Temperature range
Operating
50 to 95 degrees Fahrenheit (10 to 35
degrees Celsius) at 0-3000 ft (0-914.4m)
with an altitude de-rating of 33.35 degrees
Fahrenheit (0.75 degrees Celsius) per 1000
ft (304.8 m) to 10,000 ft (3048m)
Nonoperating
50 to 109.4°F (10 to 43°C)
Shipment
–40 to 140°F (–4 to 60°C)
Relative humidity (RH;
noncondensing)
Operating
8 to 80%
Maximum altitude
7000 ft
2133m
Acoustic Noise
Operating minimum (random seeks to
fixed disks)
L WAd (bels) 6.8
Equipment approval and safety information for the Cisco MCS 7845-I2 follows:
● FCC – Verified to comply with Part 15 of the FCC Rules, Class A
● Canada ICES-003, issue 4, Class A
● UL/IEC 60950-113 *
● CSA C22.2 No. 60950-1-03
● NOM-01913
● *This server model is certified by the respective UL and NOM agencies.
Ordering Information
To place an order, visit the Cisco Ordering Home Page and refer to Tables 11 through 14.
Table 11.
Ordering Information
Product Name
Part Number
Cisco Unified Application Environment
Refer to Cisco Unified Application Environment data sheet
Cisco Unified Communications Manager 4.3
CALLMANAGER-4.3
Cisco Emergency Responder
Refer to Cisco Emergency Responder data sheet
Cisco Unified Presence
Refer to Cisco Unified Presence data sheet
Cisco Unified Intelligent Contact Management
Enterprise
ICME-BUNDLE
Cisco Unified Intelligent Contact Management
Hosted
HOSTED-BUNDLE
Cisco Unified Contact Center Enterprise
IPCE-BUNDLE
Cisco Unified Contact Center Hosted
HOSTED-BUNDLE
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 10
Data Sheet
Cisco Unified Contact Center Express
CCX-50-STANDARD
CCX-50-ENHANCED
CCX-50-PREMIUM
CCX-60-STANDARD
CCX-60-ENHANCED
CCX-60-PREMIUM
CCX-70-NEW
Cisco Unified Expert Advisor
EA-BUNDLE
Cisco Unified IP IVR
IVR-5.0-NEW
IVR-6.0-NEW
IVR-70-NEW-BUNDLE
Cisco Unified Customer Voice Portal
CVP-3.1
CVP-3.X
CVP-4.X
CVP-7.X
Cisco Unified MeetingPlace conferencing
Refer to Cisco Unified MeetingPlace data sheet
Cisco Unified MeetingPlace Express
Refer to Cisco Unified MeetingPlace Express data sheet
Cisco Unity
See Server Spares below
Server Spares
Table 12.
Ordering Information for Spare Servers by Application
Application
Spare Part Number
Cisco Unified Application Environment
MCS-7845-I2-IPC2
Cisco Unified Communications Manager
MCS-7845-I2-IPC2
Cisco Emergency Responder
MCS-7845-I2-IPC2
Cisco Unified Presence Server
MCS-7845-I2-IPC2
Cisco Unified Intelligent Contact Management
Enterprise
MCS-7845-I2-CCE2
Cisco Unified Intelligent Contact Management Hosted
MCS-7845-I2-CCE2
Cisco Unified Contact Center Enterprise
MCS-7845-I2-CCE2
Cisco Unified Contact Center Hosted
MCS-7845-I2-CCE2
Cisco Unified Contact Center Express
MCS-7845-I2-CCX2
Cisco Unified Expert Advisor
MCS-7845-I2-CCX2
Cisco Unified IP IVR
MCS-7845-I2-CCX2
Cisco Unified Customer Voice Portal
MCS-7845-I2-CCE2
Cisco Unified MeetingPlace conferencing
MCS-7845-I2-RC2
Cisco Unified MeetingPlace Express
MCS-7845-I2-RC2
Cisco Unity
MCS-7845-I2-ECS3 (off-box unified messaging or voicemail)
(four 146-GB hard disk configuration)
MCS-7845-I2-ECS4 (on-box voicemail only)
(eight 146-GB hard disk configuration)
Field Replaceable Spares
Table 13.
Ordering Information for Server Spare Parts
Spare Part Number
Description
Spare Two 1024-MB SDRAM DIMM for Cisco MCS 7845-I2
MEM-7845-I2-2GB=
Spare 72.3-GB hot-plug SAS drive for Cisco MCS 7845-I2
HDD-7845-I2-72=
Spare 146.3-GB hot-plug SAS drive for Cisco MCS 7845-I2
HDD-7845-I2-146=
Spare 835W power supply for Cisco MCS 7845-I2
PWR-7845-I2=
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Data Sheet
Spare fan for Cisco MCS 7845-I2
FAN-7845-I2=
36-/72-GB DAT drive, non-hot plug for Cisco MCS 7845-I2
DAT-7845-I2=
Replacement Part Numbers
With the introduction of the new configurations using 146-GB disks in place of 72-GB disks, the
orderability of the old configuration was terminated. Table 14 provides the replacement part
numbers for those products that are no longer orderable.
Table 14.
Replacement Part Numbers
Old Part Number
Replacement Part Number
MCS-7845-I2-CCE1
MCS-7845-I2-CCE2
MCS-7845-I2-CCX1
MCS-7845-I2-CCX2
MCS-7845-I2-ECS1
MCS-7845-I2-ECS4
MCS-7845-I2-ECS2
MCS-7845-I2-ECS3
MCS-7845-I2-IPC1
MCS-7845-I2-IPC2
MCS-7845-I2-RC1
MCS-7845-I2-RC2
MCS-7845-I2-UC1
NA
Warranty Information
Cisco offers a 1-year limited hardware warranty on Cisco Media Convergence Servers. For terms
and conditions of this warranty, refer to
http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Cisco Unified Communications Services
Cisco Unified Communications Services allows you to accelerate cost savings and productivity
gains associated with deploying a secure, resilient Cisco Unified Communications solution.
Delivered by Cisco and our certified partners, our portfolio of services is based on proven
methodologies for unifying voice, video, data, and mobile applications on fixed and mobile
networks. Our unique lifecycle approach to services enhances your technology experience to
accelerate true business advantage.
Printed in USA
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-383110-03 07/08
Page 9 of 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising