User Manual - EXCELL PRECISION CO., LTD.

User Manual - EXCELL PRECISION CO., LTD.
Price Computing Scale
User Manual
14key & 16key
©EXCELL PRECISION CO., LTD. 2014. All rights reserved worldwide.
The information contained herein is the property of EXCELL PRECISION CO., LTD. and is
supplied without liability for errors or omissions. No part may be reproduced or used
except as authorized by contract or other written permission. The copyright and the
foregoing restriction on reproduction and use extend to all media in which the information
may be embodied.
EXCELL PRECISION CO., LTD.
TABLE OF CONTENTS
INSTRUCTION FOR USE ...................................................................................................... 2
PREPARATION BEFORE USING........................................................................................... 2
CHAPTER 1 PRODUCT INSTRUCTION................................................................................ 3
1-1 INTRODUCTION ................................................................................................................. 4
1-2 ERROR MESSAGES .......................................................................................................... 4
1-3 SCREEN DISPLAY ............................................................................................................. 4
1-4 POWER SUPPLY ............................................................................................................... 5
CHAPTER 2 KEYBOARD FUNCTION ................................................................................... 6
CHAPTER 3 OPERATION INSTRUCTION ............................................................................ 7
3-1 INTERNAL VALUE DISPLAY MODE ....................................................................................... 7
3-2 SETTING UP BACKLIGHT MODE (OPTION)............................................................................ 7
3-3 SETTINGS OF PRICING UNIT .............................................................................................. 7
3-4 G VALUE ADJUSTMENT ..................................................................................................... 8
3-5 16KEY FUNCTION ............................................................................................................. 8
3-5-1 Preset Using Conditions: ........................................................................................ 8
3-5-2 Preset tare Operating mode ................................................................................... 9
3-5-3 16KEY 50PRESET settings.................................................................................. 10
CHAPTER 4 FUNCTION SETTING...................................................................................... 11
4-1 F1 ⇒ RS-232 BAUD RATE ............................................................................................. 12
4-2 F2 ⇒ TRANSMISSION MODE ( RS-232 ) .......................................................................... 13
APPENDIX 1 7-SEGMENT DISPLAY CHARACTERS ......................................................... 16
01008044
1
ZSME100000117
EXCELL PRECISION CO., LTD.
Thank you for purchasing Price Computing Scale. In order to
operate smoothly, to last the durability, and to reduce the chance
of breakdown for this product, please read this Manual carefully.
Instruction for Use
1. In order to prevent the scale from dust and static electricity, please fix the dustproof
cover on the scale with double-sided adhesive.
2. The scale should not be drenched by rain or water. (If it gets wet carelessly, please wipe
it dry with a cloth. If its operation is abnormal, please send it to our distributor for
service. )
3. Please keep the scale in a cool and dry place. Do not store at high temperatures or
damp places.
4. Please keep the scale clean and free from insect infestation.
5. To avoid impact and it is to be used under designated pressure (the weight put on the
platter can not exceed the maximum capacity of the scale).
6. If the scale is not going to be used for some time, please clean it and store it in a plastic
bag in dry condition. A desiccant sachet may be included to prevent moisture build up.
The scale should be recharged every 3 months to prevent failure of the internal
rechargeable battery.
7. The commodity should be placed in the center of platter for accurate weighing. The
dimension of the weighted commodity should not exceed the dimension of platter.
8. Please release the protection screw “4” before weighing.
9. Please operate or charge the scale in an open area. Do not squeeze the power cord to
avoid wire on fire.
10. Operating temperature: -10℃ ~ + 40℃
11. Any suggestion for product is welcomed
Preparation Before Using
1. Put the scale on a firm level surface free for accurate weight readings. Adjust the four
leveling feet to get the leveling bubble at the centre of circle.
2. Scale must be used under a stable temperature and stable air flow. Avoid direct
sunlight onto the scale or near the exhaust port of ventilating system.
3. Scale must be used under individual socket to avoid the interference of other electric
appliances.
4. Remove any weight that might be on the platter before the scale is switched on.
5. Please note that when
or
symbol appears on the screen, the scale needs to
be charged.
6. Introduction of Storage Battery
01008044
2
ZSME100000117
EXCELL PRECISION CO., LTD.
Due to the storage battery adopt the advanced free-maintaining technique, customers
need not to replenish electrolyte.
The scale should be recharged every 3 months to prevent failure of the internal
rechargeable battery.
1. The battery should be charged for 8~10 hours.
2. The temperature of battery should below 45℃.
Maintaining
1. Please do not discharge with over-current when using the battery. Please charge the
battery after discharging current.
2. Please take down the battery when the scale is not used for a long time or break the
connection of cathode.
3. Do not short the battery terminals to check whether there is current. Please check
whether the connection point is firm to guarantee good connection.
4. The battery should be replaced by specialized person. No reverse-battery or the
product will be damaged.
a) Anode of battery should be connected with Anode of product battery(usually red
cable)
b) Cathode of battery should be connected with Cathode of product battery (usually
brown cable or black cable)
c) See the picture following
Brown cable(or black cable)
connected with Anode of
battery
Red cable connected with
Cathode of battery
Safety warnings
1. The electrolyte of battery is caustic which causes metal, cotton, etc to corrode.
2. The hydrogen will be resolved when using or charging the battery and it will cause
explosion when approaches fire.
No burning
01008044
Caution Corrosion
Warning explosion
3
Children faraway
ZSME100000117
EXCELL PRECISION CO., LTD.
Chapter 1 Product Instruction
1-1 Introduction
1. High performance A/D converter
0.3 uv/D high sensitivity
Sampling speed 15 tines/second
• non-linear scale 0.01% full scale
zero point adjustable range -5mV~ +5mV
range -4mV ~ +4mV
• load cell stimulate power source 5V DC ±2%
100mA
•
•
•
• use
2.
3.
4.
5.
6.
linearity calibration function
one group of RS232 output (option)
adapter or rechargeable battery
LCD display
battery low protection
(When battery voltage is lower than system voltage , the system will cut the power off
automatically to ensure its stable and accuracy.)
7. LED backlight
1-2 Error Messages
⇒ The weight value is over 9 division of maximum capacity.
⇒ Zero value above 10% full scale.
⇒ Zero value below 10% full scale.
⇒ The internal value is over 350,000.
⇒ The internal value is below 80,000.
⇒ If the negative weight is over 20 divisions and there is no tare weight or
pre-tare weight, the display shows “- - - - - -”
-----
1-3 Screen Display
Weight
Z
T
kg
Unit Price
$/kg
To t a l
Price
$
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Display Column
1. Weight
6 digits in total display the weight on platter.
The left digit is able to display the negative symbol.
01008044
4
ZSME100000117
EXCELL PRECISION CO., LTD.
2. Unit Price
6 digits in total display the unit price of objects on platter.
The decimal point floats two digits.
3. Total Price
6 digits in total display the total price of the objects on platter or the accumulation.
Symbol Display
1.
Z
:
“Zero” indication.
2. T
:
“Tare” indication.
3.
:
Low battery.
1-4 Power Supply
Power Selection
1. 6 V / 4 Ah Rechargeable battery
2. 110 / 220 V ±15 % AC Main power
Recharge Voltage
1. AC 110 V +10%, -15%
2. AC 220 V +10%, -15%
Power Consumption
30 mA (system + no backlight)
About 140 hours
40 mA (system + front display backlight)
About 100 hours
50 mA (system + front display backlight + rear display backlight)
About 80 hours
Low Power Alarm
When the (
) symbol keeps flashing on the left down corner of the display, it need
charging.
The indicator will turn off automatically after 5 ~ 10 hours (approximately 1 ~ 2
hours with backlight on), when the low battery warning symbol shows up. The
indicator must be fully charged, before operating again.
When the low battery warning symbol shows up, please recharge the indicator
immediately for fear of weight instability.
01008044
5
ZSME100000117
EXCELL PRECISION CO., LTD.
Chapter 2 Keyboard Function
10 ~ 9 : Number key. Press the keys to input the numbers (0 ~ 9) and to set unit
price.
Press the key to clear the old unit price and then input the new one if you
:
CE 、0C0
would like to change the unit price (If the unit price has been input for 3
seconds, you can input the new one immediately).
1T1 : Press the key to deduct the containers’ weight and the symbol “◄” in Weight
will appear.
1Z1 、→0← : Weight return to zero
1. 1 : Press this key one time, the DECIMAL POINT is available. Press this key
two times with number key 1, 2, 3 or 4, PRICING UNIT function is available.
00 : Press this key to enter “00”
Kg/100g : Units shift between kg and 100g
0F0 : Founction key
PLU : Save function
Different keys for different models
14 key
7
4
1
0
8
5
2
00
16 key
7
8
4
5
1
2
0
PLU
01008044
9
6
3
CE
Z
9
6
3
C
→0← Kg/100
T
14key
7
4
1
0
8
5
2
.
9
6
3
CE
Z
T
F
T
6
ZSME100000117
EXCELL PRECISION CO., LTD.
Chapter 3 Operation Instruction
3-1 Internal Value Display Mode
Press
Z
key, when the display show “
” ,then, press
immediately (1C1 for 16 key). The display will show internal value.
CE
Press
key
0
to
exit the internal value mode and return to the weighing mode.
3-2 Setting up Backlight Mode (option)
<Method 1>
” ,then press
Press Z key, the display will show “
away. It is “auto-backlight mode”.
Press Z key, the display will show “
away.
It is “backlight-off mode”.
”, then press
4
5
key right
key right
<Method 2>
Press 0 key for 2 seconds, the beeper will beep …three times.
The scale will change to backlight mode ⇒
“Auto-backlight mode” or “backlight-off mode”.
Auto-backlight mode
When there is a weight on the pan which weight is over 10d or pressing any keys,
the backlight will be on. After back to zero for 10 desonds (the weight is under
10d,), backlight will be off
The scale will keep the auto-backlight mode after the next bootup, if the
auto-backlight mode is set before last power-off.
3-3 Settings of Pricing Unit
n Selecting the pricing unit:
Double press
z3
key, the display will show the current pricing unit:
kg
kg 3
.
o Press 1 ~ 6 to select pricing units. The scale will be back to weighing & price mode.
The display will show the symbol indication “◄” for the request pricing unit.
1 ⇒ kg
2 ⇒ 100g
3 ⇒ HK catty
4 ⇒ tl.T
5 ⇒ lb
6 ⇒ oz
If the price unit “lb"is seleteced, the displaying will show three symbols “3".
If the price unit “oz”is selected, the displaying will not show any symbol “3”.
01008044
7
ZSME100000117
EXCELL PRECISION CO., LTD.
3-4 G Value Adjustment
Steps:
1.
Press 0 key and do not release, and then power on to enter int G value
adjustion mode.
2.
Press
T
key to search the historic G value data.
3.
Press
Z
key to set and confirm G value. (→0← for 16 key)
4.
Press
0
~
5.
Press
CE
6.
Press
·
9
key to input the value.
key to shift the flashing digit one space to left. (1C1 for 16key)
key to exit.
(1) The G value can be revise in 9 times.
(2) The G value range is from 9.78031 to 9.83217.
3-5 16key Function
3-5-1 Preset Using Conditions:
1. Preset function turn on (Note A)
2. The scale should be empty
3. There should not be general tare value (Note B)
(Note A)
Preset function turn on / off (SWA1 should be adjusted to ADJ)
Hold keypad C,it will shows Preset tare state after 2 seconds.
If Preset tare state is on, the Preset tare function will be off and it will restart-up.
If it is on the state of on, it show PT YES; If off, it shows PT NO
(Note B)
If Preset function is on, general tare function can be used (But the premise
should be CLEAR preset tare value), Preset tare function and general tare
function can not be used meanwhile.If you want to use preset tare function,
you should clear general tare value to use preset tare function.
01008044
8
ZSME100000117
EXCELL PRECISION CO., LTD.
3-5-2 Preset tare Operating mode
The scale should be empty, and press number key to input the preset tare value you want,
For example, if you want preset tare 1.00kg, you should input 100
It shows as follows:
Weight
Unit Price
Total
1
0.000
1.00
0.00
The scale should be empty
And there should not be general tare value(Note B)
Press key T , it shows as follows:
Weight
Unit Price
Total
2
-1.000
preta
0.00
The scale should be empty
And there should not be general tare value(Note B)
If not pressing key F within 2 seconds, you will quit the preset tare value of this time and
be back the last preset tare value. (If the last preset tare value is 0), it shows as follows:
Weight
Unit Price
Total
0.000
0.00
0.00
The scale should be empty
And there should not be general tare value(Note B)
If pressing key F within 2 seconds, it shows as follows:
Weight
Unit Price
Total
3
-1.000
0.00
------
The scale should be empty
And there should not be general tare value(Note B)
At this time, it will occur net and PT light.
To clear preset tare operating mode is as follows:
Press number key 0 to make Unit Price 0, Press key T (The scale should be empty) it
shows as follows:
Weight
Unit Price
Total
1
-1.000
clean
------
The scale should be empty
And there should not be general tare value(Note B)
If not pressing key F within 2 seconds, you will quit the preset tare value of this time and
be back the last preset tare value.
Weight
Unit Price
Total
-1.000
0.00
------
The scale should be empty
And there should not be general tare value(Note B)
If pressing key F within 2 seconds,it shows as follows:
Weight
Unit Price
Total
2
0.000
0.00
0.00
The scale should be empty
And there should not be general tare value(Note B)
At the moment, net and PT light will disappear.
01008044
9
ZSME100000117
EXCELL PRECISION CO., LTD.
3-5-3 16KEY 50PRESET settings
Preset PLU setting mode.
1. Hold PLUkey until it shows as follows: (Unit Price shows 0 and flickers )
Weight
Unit Price
Total
P nr.
0
Both the scale is empty and there is weight on are ok
2. Press number keys to input PLU Address you need (01~50),totally it can record 50 groups.
Weight
Unit Price
Total
P nr.
1
Both the scale is empty and there is weight on are ok
Eg: if you want to store the 1st PLU, press number key 1, when the number key 1 rightmost
flicker.
If you want to store the 32rd PLU, press number key 32, when the number key 2 rightmost
flickers.
When flickering, you can modify the value input by pressing key C.After 2 seconds,it stops
flickering when it shows “Unit Price”, entering into inputting PLU,.“Total” shows 0.00, the
number key 1 rightmost flicker as follows.
3. Entering into inputting PLU, it shows “Unit Price”, which can be set 5 digits at most.
Weight
Unit Price
Total
P nr.
32
0.00
Both the scale is empty and there is weight on are ok
If you want to store the unit price of 0.1, press number key 10, then the number rightmost
flickers.
(If you want to store the unit price of 123.45, press number key 12345), then the number
rightmost flickers as follows:
Weight
Unit Price
Total
P nr.
32
123.45
Both the scale is empty and there is weight on are ok
When flickering, you can modify the value input by pressing key C, After 2 seconds,it stops
flickering (After stoping flickering, you can modify the value input by pressing key C if you
want), At this time, if you want to input the next group of PLU , press PLU key once, then
input the next group of PLU.If finished , press F key.
B. Call PLU Mode
1. Input the PLU number you want.
For example, if you want to call the 32rd PLU, at weighing mode, press number key 32
then press, PLU key once,you can callo the unit price you need,it shows as follows:
Press number key 32, it shows as follows:
Weight
Unit Price
Total
0.00
0.32
0.00
Both the scale is empty and there is weight on are ok
Then press PLU key,it shows as follows:
Weight
Unit Price
0.00
Total
123.45
0.00
Both the scale is empty and there is weight on are ok
01008044
10
ZSME100000117
EXCELL PRECISION CO., LTD.
Chapter 4 Function Setting
Press
Z
key and do not release to enter function setting mode. (for 14 key)
Press
F
key and do not release to enter function setting mode. (for 16 key)
WEIGHT
UNIT PRICE
Press CE key (for 14 key)
WEIGHT
WEIGHT
WEIGHT
TOTAL PRICE
press 1C1 key (for 16 key)
UNIT PRICE
Press CE key (for 14 key)
TOTAL PRICE
press 1C1 key (for 16 key)
UNIT PRICE
Press CE key (for 14 key)
TOTAL PRICE
press 1C1 key (for 16 key)
UNIT PRICE
Press CE key (for 14 key)
WEIGHT
press 1C1 key (for 16 key)
UNIT PRICE
Press CE key (for 14 key)
TOTAL PRICE
TOTAL PRICE
press 1C1 key (for 16 key)
⇒ RS-232 Baud Rate
⇒ Transmission Mode ( RS-232 )
⇒ reserved
⇒ reserved
⇒ reserved
01008044
11
ZSME100000117
EXCELL PRECISION CO., LTD.
4-1 F1 ⇒ RS-232 Baud Rate
Weight
Using
Unit Price
0,1,2,3
Total Price
keys to choose 0,1,2,3 in order
0 ⇒ 9600 bits/second
1 ⇒ 4800 bits/second
2 ⇒ 2400 bits/second
3 ⇒ 1200 bits/second
Press
Press
Press
CE key to enter the next setting mode. (for 14 key)
C key to enter the next setting mode. (for 16 key)
T key to comfirm.
RS-232 Interface Format
I . Type: UART Signal of EIA-RS0232 C
II . Protocol:
1. Baud rate
2. Data bits
3. Parity bit
4. Stop bits
5. Code
Starting bit
01008044
: 1 200, 2 400, 4 800, 9 600 bits/second
: 8 bits
: None
: 1 bit
: ASCII
(American Standard Code for Informaiton Interchange)
Data bits
12
Ending bit
ZSME100000117
EXCELL PRECISION CO., LTD.
4-2 F2 ⇒ Transmission Mode ( RS-232 )
Unit Price
Weight
Press number key
0,1,2,3,4,5,6,7,8
Total Price
to choose 0,1,2,3,4,5,6,7,8 in
order
1 ⇒ Continuous transmission (only RS-232)
2 ⇒ Stable transmission (only RS-232)
3 ⇒ RS-232 off
4 ⇒ Continious transmission (weight transmission only)
5 ⇒ Stable transmission (weight transmission only)
6 ⇒ Continuous transmission (printing format: +001.000)
7 ⇒ Stable transmission (printing format: +001.000)
8 ⇒ Command mode
Press
CE
key to enter the next setting mode. (for 14 key)
Press
Press
C key to enter the next setting mode. (for 16 key)
T key to comfirm.
When F2 setting is “4 ” or “5”, the RS232 format is as below.
4 ⇒ Continious transmission (weight transmission only)
5 ⇒ Stable transmission (weight transmission only)
When current weight is 10KG, the format is as below.
10.000
(In stable transmission, it only output once. You need put it up again and the
scale will read next data)
10.000
10.000
10.000
When F2 setting is “8”, the command format is as below.
Input order ‘W’ in PC, the scale will reply the weight to PC, for example +004.000
01008044
13
ZSME100000117
EXCELL PRECISION CO., LTD.
RS232 DATA FORMAT
When F2 setting is “1” or “2”
(1) Weight unit is g.
1
6
7
HEAD
, HEAD
,
(2) Weight unit is kg/lb
±
1
2
3
2
4
3
5
4
5
6
8
9
10
7
8
9
10
, HEAD
,
±
(3) Weight unit is g, lb or oz.
2
HEAD
3
4
5
6
7
,
HEAD
,
±
12 13 14 15 16
DATA
HEAD
1
11
11
UNIT CR
12 13 14 15 16
DATA
UNIT
17
g
LF
17 18 kg/lb
CR
LF
9 10 11 12 13 14 15 16 17 18 19 20 21 twg
8
DATA
UNIT
CR
LF
(4) Weight unit is Catty.
1
2
3
4
5
6
7
HEAD
,
HEAD
,
±
8
HEAD1 ( 2 BYTES )
OL - Overload , Under load
ST Display is Stable
US Display is Unstable
9
10 11 12 13 14 15 16 17 18 19 20 Catty
DATA
UNIT
CR
LF
HEAD2 ( 2 BYTES )
NT GS -
NET Mode
GROSS Mode
DATA ( 7 or 8 BYTE )
2D ( HEX ) = “ – ” ( MINUS )
2B ( HEX ) = “ + “ (PLUS)
2E ( HEX ) = “ . ” ( DECIMAL POINT )
UNIT ( 2、3 or 4 BYTE )
kg
lb
tl.T
hkg
= 6B ( HEX )
= 6C ( HEX )
= 74 ( HEX )
= 68 ( HEX )
01008044
;
;
;
;
67 ( HEX )
62 ( HEX )
6C ( HEX ) ; 2E ( HEX ) ; 54 ( HEX )
6B ( HEX ) ; 67 ( HEX )
14
ZSME100000117
EXCELL PRECISION CO., LTD.
Example of Transmission:
Data format for RS-232 continuous transmission are as below.
1. The gross weight (+0.876 kg) shown as below, after stable: (under no tare or pre-tare
mode)
S T
,
G S
,
+ 0
0 0
.
8 7 6
k
g 0D 0A
HEAD
,
HEAD
,
DATA
UNIT
C
LF
2. The net weight (-1.568lb) shows as below, after unstable: (under tare or pre-tare mode)
U S
,
N T
,
0 0 1
.
5 6 8
l
b 0D 0A
HEAD
,
HEAD ,
DATA
UNIT
C
LF
3. The net weight (+15 TW Catty and 6.24 tl.T), after stable: (under tare or pre-tare mode)
S T , N T , + 1 5 . 0 6 . 2 4 t
l
. T 0D 0A
HEAD
,
HEAD
,
DATA
UNIT
C
LF
4. The net weight (+15 Catty and 6.24 HK Catty), after stable: (under tare or pre-tare
mode)
S T , N T , + 1 5 . 0 6 . 2 4 h k g 0D 0A
HEAD
,
01008044
HEAD
,
DATA
15
UNIT
C
LF
ZSME100000117
EXCELL PRECISION CO., LTD.
Appendix 1 7-Segment Display Characters
Number
Display
Letter
Display
Letter
0
A
N
1
B
O
2
C
P
3
D
Q
4
E
R
5
F
S
6
G
T
7
H
U
8
I
V
9
J
W
K
X
L
Y
M
Z
℃
01008044
16
Display
ZSME100000117
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement