User manual | AuraAudio Products A3

AuraAudio Products A3
A3 is compact 3-way line array enclosure. As a full range enclosure A3 arrays can perform any application ranging from live sound
reinforcement to permanent installations. When an extra low frequency extension or headroom is needed A3 arrays can be combined
with additional subwoofer such as B25.
A3 maintains controlled horizontal directivity below 300Hz and produces over 145dB SPL from an array of 4 enclosures. It utilizes 12"
vented LF woofer, 8” cone driver loaded with a proprietary multi channel equal path waveguide and 3 x 1" compression drivers in 100
degree waveguides.
Designed for use in groups of 4 or more A3 arrays can easily be installed using integral rigging hardware. Cabinet angle can be waried
from 0.75 degrees to ten degrees. Array configuration can be simulated via ASIM modeling software for PC.
SPECIFICATIONS
Frequency Response (-6 dB): 65 Hz – 20 kHz
Horizontal Coverage (-6 dB): 100 degrees
Vertical Coverage (-6 dB): <10 degrees
Max Peak SPL (calculated): 131/136/141 dB (LF/MF/HF)
Sensitivity, 1W/1m (nominal): 99/107/118 dB (free field) (LF/MF/HF)
Impedance: 8 ohms
Crossover: 300 Hz/4 kHz (active)
Power handling (AES): 400/200/200 W (LF/MF/HF)
Power handling (peak): 1600/800/800 W (LF/MF/HF)
Recommended HP-frequency: 60 Hz, 18 dB/octave
LF: (1) x 12” cone driver, vented
MF: (1) x 8” cone driver, horn-loaded
HF: (3) x 1” compression driver in proprietary equal path waveguide
Enclosure material: Birch plywood, textured black dual-component paint
Rigging hardware material: Stainless steel
Grille: Zinc plated steel, black powdercoat paint
Connectors: (2) x NL8
Dimensions: 970 x 330 x 421 [mm]
Weight: 45 kg

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project