Operations Manual
Power Clean Bac Vac
Vacuums
Code: 28405
Serial #
:_________________________
Date of Purchase:
_________________________
More info : www.dustbane.ca
03-2013
1. Index
2. Safety Instructions
2.1. Reduce the risk of fire, electric shock or injury
3. Grounding Instructions
3.1. Grounding Method
4. Care of your Bac Vac vacuum cleaner
5. Operation and assembly instructions
5.1. Getting started
5.2. To change paper filter
5.3. Cloth filter maintenance
5.4. Assembly of attachments
6. Trouble shooting guide
7. Machine parts list
7.1. Machine schematic drawing
7.2. Tool kit #1
4
4
5
4
4
3
4
2
3
1
2
5
6
6
6
2
2. Safety Instructions
Read this manual carefully before operating. Know the proper operation, correct applications and the limitations of this equipment before use.
This backpack vacuum will afford you many years of trouble free operating satisfaction, provided it is given the proper care. All parts have passed rigid quality control standards prior to being assembled to produce the finished product. Prior to packaging, your backpack vacuum was again inspected for assurance of flawless assembly.
This backpack vacuum is protectively packed to prevent damage in shipment. We recommend that upon delivery, unpack the unit and inspect it for any possible damage. Only a visual inspection will reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered your vacuum. As a shipper, we are unable to report any claim for damage. You must originate any claim within five (5) days.
This manual is for your protection and information. Please read carefully since failure to follow precautions could result in discomfort or injury.
2.1. Reduce the risk of fire, electric shock or injury
Do not use on wet surfaces. Do not expose to rain. Store indoors.
• DO NOT leave the vacuum when plugged in. Unplug from the outlet when not in use and before servicing.
• DO NOT vacuum up any liquids. This vacuum is for dry use only! To avoid electric shock, DO NOT expose to rain. Store indoors. DO NOT use on wet surfaces.
• This is not a toy. Close attention is necessary when used around or near children.
• Use only as described in this safety manual. Use only manufacturer’s recommended attachments, accessories, replacement parts and filters.
• DO NOT use this backpack vacuum with damaged cord or plug. If the vacuum is not working as it should, because it has been dropped, damaged, left outdoors or dropped into water, contact an authorized service center or factory.
• DO NOT pull or carry by the cord, use cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Keep cord away from heated surfaces.
• DO NOT unplug the vacuum by pulling the cord. To unplug, grasp the plug, not the cord.
• DO NOT handle the plug of the vacuum with wet hands.
• DO NOT put objects into openings. DO NOT use with any opening blocked. Keep free of dust, lint, hair and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all body parts away from opening and moving parts.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.
• DO NOT use without the proper cloth filtration bag, paper filter bag and other filters in place.
• DO NOT use the vacuum to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
• Use extra care when cleaning on stairs.
• DO NOT use where oxygen or anesthetics are used.
• Turn off all controls before unplugging. Make sure the on/off switch is in the off position.
• The extension cord provided with this unit is 50-foot, 16/3-gauge wire and MUST be used with this unit to ensure grounding protection.
• Replace damaged or worn parts immediately with genuine, original equipment parts to maintain safety and to protect your limited warranty.
• DO NOT lubricate the motor.
• DO NOT tie extension cord to pigtail cord. This will damage the cord and will not be covered under warranty.
• DO NOT overstretch the safety power cord between the vacuum and the electrical outlet in the wall.
• DO NOT use without all filters correctly secured in place.
• When using the vacuum with a powerhead tool and connection, always turn off the vacuum and nozzle tool before connecting or disconnecting either the hose or power nozzle. Depending on your vacuum model, the hose may contain electrical wires. DO NOT use when damaged, cut or punctured.
Always turn OFF the vacuum before connecting, disconnecting or working on the vacuum. This vacuum must be connected to a properly grounded outlet only (see grounding instructions).
3. Gounding Instructions
Danger: Improper grounding method can resukt in a risk of electric shock.
Electrical equipment must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. The vacuum is equipped with a cord containing a grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded wire to a flat bed terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.
3.1. Grounding Method
This electric equipment is for use on a normal 120 volt circuit. It has a grounded plug that looks like a the plug illustrated in (Fig A). A temporary adapter that looks like the adapter illustrated in (Fig B and C) may be used to connect this plug into a 2-pole receptacle as shown in (Fig B) if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet (Fig A) can be installed by a qualified electrician. The green color rigid ear lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
WARNING: Improper connection of the equipment grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. DO NOT modify the plug provided with the equipment. If it will not fit into the outlet, have a proper outlet installed by a qualified electrician.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.
3
4
4. Care of your Bac Vac vacuum cleaner
Treat your vacuum cleaner as you would any other high grade precision made product. Dropping, unreasonable bumping across thresholds and other misuses may result in a damaged unit which will not be covered under warranty.
When not in use, the power cord should be wrapped around the molded-in cord wrap for storage. After each use, wipe the vacuum body, accessories and power cord with a slightly damp cloth.
5. Operation and assembly instructions
Preparation and operation. Dry only!
This vacuum is equipped with an air-thru motor and is designed for dry pickup only. Unpack the carton and remove the vacuum and attachments (if purchased with tools).
5.1. Getting started
1. Make sure your on/off switch is in the OFF position.
2. Remove lid and check to make sure you have both a cloth filter bag and paper filter bag in place. Secure lid back onto the vacuum body, tightening securely. Both bags must be used at all times. Any damage resulting from the lack of using both bags will not be covered under warranty.
3. Thread your safety power cord around the built in cord knob on the side of the backpack. Do not tie or loop the pigtail cord with the extension cord.
4. Loosen the shoulder and waist belt straps and slide vacuum on.
5. Connect and tighten waist belt ensuring that majority of the weight is on your hips, not your shoulders.
6. Adjust the shoulder straps for comfort.
7. Connect the sternum straps for added support and ideal fit.
8. Plug your vacuum into a properly installed outlet.
9. Turn unit on and proceed with vacuuming.
10. Always store vacuum, safety power cord and tools in a cool dry place indoors.
NOTE: The weight of the vacuum should be distributed on your hips. Adjust any strap as needed for your custom fit.
5.2. To change paper filter bag
1. Unclip lid latches and lift lid off of the body.
2. Remove full paper bag from the tank and dispose of properly.
3. Take new paper filter bag and set inside cloth filter bag, expanding it to the sides of the cloth filter bag.
4. Reinstall the top cap, clamping the lid latches down tightly.
5.3. Cloth filter maintenance
The cloth filter should be inspected and cleaned each time you empty the tank. DO NOT wash the cloth filter. It could cause shrinkage of the cloth and damage to the gasket. Simply shake off any dust or loose particles and brush the exposed surface with a soft bristle brush.
CAUTION: Always exercise caution when handling the vacuum. Dropping the vacuum could cause permanent damage to the internal components.
HEPA Models: When the white disk inside your dome filter is discolored, replace it with a new HEPA filter with bag support. Replacement time frame of the HEPA filter depends on the frequency and application of use. For best results, replace every six (6) months.
IMPORTANT: Following the instructions above is critical in prolonging the life of your vacuum. All filters must be used at all times.
The backpack comes assembled, but you will need to install the hose to the wand, and the wand to the attachment.
5.4. Assembly of attachments
Wand Assembly (for 2-Piece Wand Only):
• Align the button lock of the upper wand section with the opening for the
button lock on the lower wand section.
• Push the sections together until the button lock slides into place and the
lock is secured.
To Connect Wand to Hose:
• Connect the tapered end of the wand to the swivel cuff at the end of the
hose.
To Connect Wand to Attachments:
• Turn wand nut counterclockwise approximately four (4) complete turns.
• Insert the tool into wand and coupling.
• While holding the tool in place, turn nut clockwise until wand nut is fully
locked.
6. Trouble shooting guide
CAUTION: Always disconnect power cord before servicing vacuum.
WARNING: Repairs should only be performed by an authorized service center.
PROBLEM: Loss of vacuum
Cause
Cap is damaged
Faulty vacuum motor
Full paper bag filter
Clogged hose or wand
Loose or broken fan
PROBLEM: Motor is not running
Cause
Faulty on/off switch
Power cord defective
Loose connection or wiring
Motor defective
Blown fuse or tripped circuit breaker
Solution
Inspect and replace if needed
Call manufacturer or service center
Replace paper filter bag
Remove obstruction
Call manufacturer or service center
Solution
Call manufacturer or service center
Call manufacturer or service center
Call manufacturer or service center
Call manufacturer or service center
Replace fuse or reset circuit breaker
5
6
PROBLEM: Dust blowing from vacuum when running
Cause Solution
Full paper bag
Paper filter bag not installed properly
Cloth filter bag is dirty
Cloth or paper filter bag is torn
Replace filter bag
Reinstall or replace paper filter bag properly
Clean cloth filter bag
Replace
7. Machine parts list
7.1. Machine schematic drawing
7.2. Tool kit #1
7
8
