Page 1 Page 2 FEATURES: * Controlled by Radio Signal (German

Page 1 Page 2 FEATURES: * Controlled by Radio Signal (German
Radio Controlled Clock
with Foreign Time Setting,
Summer / Winter Time Display,
Dual Alarm, Snooze and Light.
DEE
DC
F
МИ
-
_— ==
Instruction Manual
(HB90)
FEATURES:
* Controlled by Radio Signal (German DCF77)
* Large LCD display
* Displays Hour, Minute, Second; Month, Date, Day of Week,
Alarm Time
* Foreign Time Setting (-9 Hour to +9 Hour)
* Summer Time Indicator
* Dual Alarm with programmable snooze period
* Independent Alarm Time Setting - Crescendo Daily Alarm1 &
Single Alarm 2
* 12 Hour or 24 Hour Display Format Selectable
* Weekday Indication in 5 Languages
* battery Low Indicator
* Backlight function
* Single Battery (1.5V) Operation
INDICATOR STANDING FOR INDICATOR STANDING FOR
® RADIO SIGNAL z REPEAT ALARM INDICATION
D DATE M MONTH
FOREIGN TIME INDICATION в SUMMER TIME INDICATION
PM PM (12 HR DISPLAY ONLY) 9 ALARM 1
AM AM (12 HR DISPLAY ONLY) 9 ALARM 2
î RADIO SIGNAL WEAKLY
SETTING THE TIME
* Once the battery is installed properly, all the displays on the face of the
clock will light up briefly. The time & date will be: 1°1 "WE 0:00
and the alarm1 time will be 7:00.
* Your radio-controlled clock will begin to seek out the DCF time
signal automatically. This takes typically between 3-5 minutes in good
conditions. If after 5 minutes the DCF time has not been received, use the
MODE key to set the time manually. The clock will then automatically
attempt to receive the DCF time each hour every day. When this is
successful, the received time will override the manually set time
* Press the MODE button and the time is set.
If no key is pressed for 30 seconds, the clock will
revert to normal time display.
TO SET THE LANGUAGE OF WEEKDAYS
* In normal mode, press and hold the= button for 3 seconds.
* The language of the current weekdays will be displayed in the LCD :
e.g. English (EN), German(GE), Italian(IT), French(FR), Spanish(SP).
* Press the == button for 1 second to adjust to the correct language
of weekdays.
TO SET THE FOREIGN TIME
* In normal mode, press and hold thet button for 3 seconds. The clock
will switch to foreign time with the “F” icon turn on.
* Press and hold the+ button for 3 seconds in foreign time will switch to
normal time with the “F” icon turn off.
* In foreign time, press and hold the MODE button for 3 seconds to set the
foreign time with the hour digit flashes.
* Press the = button or thed button to adjust to the correct hour for the
time zone.
* Press the MODE button and the foreign time is set.
* If no key is pressed for 30 seconds, the clock will revert to foreign
time display.
TO SET THE DAILY ALARM 1
Press and hold thes9 ser button for 3 seconds:
* The alarm1 hour digit will flash, then press
the + button or the= button to adjust to
the desired hour.
* Pressthe «ser button, the alarm1 minute
digit will flash, then press the + button or the=
button to adjust to the desired minute.
* Press the (ÿseT button to show the current
snooze period with the minute field flashes.
* Press the + button or the= button to adjust
to the desired snooze period from 1 minute
to 59 minutes.
* Press the Y ser button and the alarm1 time
is set and enabled.
* If no key is pressed for 30 seconds, the clock will
resume the alarm | display.
TO SET THE ALARM 2
* Press and hold thes9Y ser button for 3 seconds:
* The alarm2 hour digit will flash, then press
the *+button or the= button to adjust to
the desired hour.
* Press the Y sET button, the alarm2 minute
digit will flash, then press the +button or the=
button to adjust to the desired minute.
10:01;
29 BFP- 569
—|—=
* Press the set button to show the current
snooze period with the minute field flashes.
* Press the + button or the= button to adjust
to the desire snooze period from 1 minute
to 59 minutes.
* Press the Y ser button and the alarm2 time
is set and enabled.
* If no key is pressed for 30 seconds, the clock will
resume the alarm 2 display.
USING THE ALARM AND SNOOZE FOR DAILY
ALARM 1 or ALARM 2
* Pressthe «ŸseT/ ($sETbutton to turn the alarm1 on, or the alarm1 off/
the alarm 2 on, or the alarm2 off.
* When the current time reaches the alarm time that is enabled, the
corresponding alarm is activated.
* Press the Yser/ ($seTbutton when the alarm is activated will stop the
alarm for 24 hours.
* When the alarm is activated, press the SNOOZE/LIGHT button and
the alarm stops but sounds again after the snooze period (4 minutes
snooze period is pre-programmed).
* The repeat alarm indicator will flash.
* The alarm will stop after 4 minutes if the s§ ser / set button or
SNOOZE/LIGHT button is not pressed.
FUNCTION KEYS
Your radio-controlled clock has 6 easy to use function keys that control
operation:
MODE
* То view alarm1 time or alarm2 time
* To set the time manually
* To set the foreign time manually.
+ a .
* To increase the hour, minute, year, month, date during time setting
* То switch between 12 hour display format and 24 hour display format.
To switch between the local time and foreign time
— To decrease the hour, minute, year, month, date, during time setting
* To select the language of day of week.
SET
* To set the daily alarm1
* То turn on or turn off the daily alarm1
SŸSET
To set the daily alarm2
* То turn on or turn off the daily alarm2
SNOOZE/LIGHT
+ To turn on the backlight
- To switch to snooze mode when the alarm is activated
TO SET THE TIME AND DATE MANUALLY
Press and hold the MODE button for 3 seconds: 7
* The hour digit will flash, then press the+ button | 'LILIOS
or the = button to adjust to the correct hour. ws 100
——|_,
* Press the MODE button:
The minute digit will flash, then press thet button
or the = button to adjust to the correct minute.
* Press the MODE button:
The year digit will flash, then press the*+ button
or the= button to adjust to the correct year.
* Press the MODE button:
The month digit will flash, then press thet button or
the = button to adjust to the correct month.
* Press the MODE button:
The date digit will flash, then press the*+ button or
the “button to adjust to the correct date.
> 03,
1098 FR. MN FR. 00
RECEIVING THE RADIO CONTROL SIGNAL
The radio-controlled clock will automatically receive the radio signal
every hour. It will take 3-5 minutes to receive the radio signal.
If the DCF signal is received, the DCF tower will be visible on the
display, otherwise it will not.
BACKLIGHT
Press the SNOOZE/LIGHT button to light up the clock for 3 seconds.
LOW BATTERY LEVEL DETECTION
Should the battery capacity drop to a level that is not sufficient to operate
the clock, the low battery indicator will light up. The battery should be
replaced as soon as possible.
Attention! Please dispose of used batteries|in
an ecologically safe manner.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement