bintec RS123 - Allnet.Italia SpA

bintec RS123 - Allnet.Italia SpA
Professional Gigabit-Ethernet-Router
bintec RS123
• 5x Gigabit-Ethernet
• SFP Port
• 5x IPSec tunnels, HW acceleration
• Web based configuration
• Prepared for IPv6
• Flexible mounting: Desktop or 19" Rack
• Stateful Inspection Firewall
bintec RS123
Professional Gigabit-Ethernet-Router
--- Availability: May 2014 --The bintec RS123 is a powerful Gigabit Ethernet router predominately used in SMEs and for
providing connectivity to branch locations and home offices.
Product description
The RS123 is a powerful Gigabit Ethernet router predominately used in SMEs and for providing
connectivity to branch locations and home offices.
The RS123 delivers advanced security, flexibility, and exceptional performance across a wide
range of applications. This router boasts a fan-less metal housing, offers long-term reliability for
business-critical applications, and makes an ideal access router for small and mid-sized
enterprises (SMEs), branch locations, and home offices.
Thanks to the included 19-inch rackmount conversion bracket, customers can easily integrate
this model into 19-inch server racks or operate it on the desktop. Rack mounting is further
simplified by the device height of exactly one rack unit and the integrated power supply.
The bintec RS123 also provides five Gigabit Ethernet ports which can be independently
configured for use in a LAN, WAN, or DMZ. The RS123 also comes with an SFP slot for optical
fibre expansion modules, e.g. for connecting to an optical fibre broadband connection.
The included five licenses for hardware-accelerated IPSec tunnels provide comprehensive
high-speed VPN functionality and allow for secure connections to branch locations and off-site
employees. An LTE(4G) or UMTS(3G) USB modem (stick) connected to the USB port can be used
as a remote configuration access and as a backup interface.
With its wide range of WAN connectivity options, the RS123 raises the bar for flexibility among
access routers.
Smart design
The fan-free metal housing is a proven, rugged design that has set bintec devices apart from the
competition for years. The integrated power supply and 19" conversion bracket now also make it
easy to install in a 19" rack.
Maximum performance
The bintec RS123 is based on a powerful platform with unrivaled capabilities. High speed
interfaces handle heavy local network traffic with ease. You can even establish links between
separate company locations over secure, encrypted VPN tunnels.
Airtight security
The bintec RS123 not only delivers outstanding performance, it also provides a comprehensive
range of security features. With five simultaneous IPSec channels available, you can establish
secure links between branch locations, subsidiaries, and home offices. The integrated IPSec
implementation in bintec routers allows the use of pre-shared keys as well as digital certificates
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 2 / 9
as recommended by Germany's Federal Office for Information Security. This lets you use a public
key infrastructure and ensures maximum security. An object-oriented stateful inspection firewall
offers packet filtering to provide additional protection against attacks.
Professional management
A graphical user interface is the primary means of configuring the router. This fast, web-based
interface makes it easy to set up routers using the integrated configuration wizard.
Administrators can also manage the devices locally or remotely using configurable telnet, SSH,
ISDN login, or GSM dial-in. The bintec DIME Manager is a free software tool that allows
administrators to manage up to 50 devices at once.
Ready for the future
Businesses can easily integrate the RS123 into existing company networks. This bintec router
also allows for a gradual migration to the new IPv6 internet protocol.
The SFP slot for optical fibre expansion modules enables connection to the highspeed optical
fibre broadband of the future. Therfore, the professional-grade bintec RS123 router is a sound
investment in your organization's future.
bintec RS123 (5510000340)
IP Access Router; Desktop device with option. 19" Rackmounting; incl. IPSec (5
tunnels), certificates, HW-encryption; 4+1 Gigabit Eth. switch; USB Port; SFP Modul
Slot; dt. and intern. Version
Multicast inside IPSec tunnel
Enables the transmission of multicast packets via an IPSec tunnel
Policy based Routing
Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4),
source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and
destination interface status
Multicast IGMP
Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution
of IP packets to several stations
Support of RIPv1 and RIPv2, separated configurable for each interface
Multicast IGMP Proxy
For easy forwarding of multicast packets via dedicated interfaces
Extended RIP
Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of
the routes; furthermore the possibility to define RIP filters for each interface.
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 3 / 9
Protocols / Encapsulations
Enables the easy routing of IP via ATM
DNS Forwarding
Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
PPPoE (Server/Client)
Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via
Ethernet/DSL (RFC 2516)
Packet size controling
Adaption of PMTU or automatic packet size controling via fragmentation
Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for
establishing of VPN connections
MLPPPoE (Server/Client)
Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support
DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the
Multilink extension MLPPP for the bundeling of several connections
DNS client, DNS server, DNS relay and DNS proxy
Quality of Service (QoS)
Bandwidth reservation
Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths
TCP Download Rate Control
For reservation of bandwidth for VoIP connections
Layer2/3 tagging
Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes
Priority Queuing of packets on the basis of the DiffServ/TOS field
Policy based Traffic Shapping
Dynamic bandwidth management via IP traffic shaping
Redundancy / Loadbalancing
VPN backup
Simple VPN backup via different media. Additional enables the bintec elmeg interface based VPN
concept the application of routing protocols for VPN connections.
Load Balancing
Static and dynamic load balancing to several WAN connections on IP layer
Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with
free selectable priority
Bandwidth on Demand: dynamic bandwidth to suit data traffic load
Layer 2 Functionality
Support of layer 2 bridging with the possibility of separation of network segment via the
configuration of bridge groups
Proxy ARP
Enables the router to answer ARP requests for hosts, which are accessible via the router. That
enables the remote clients to use an IP address from the local net.
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 4 / 9
Layer 2 Functionality
Support of up to 256 VLAN (Virtual LAN) for segmentation of the network in independent virtual
segments (workgroups)
SFP Slot
SFP slot for conventional optical 10/100/1000 Mbps Ethernet SFP module
5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be
switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN
or WAN.
USB 2.0 host
USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see
Service-Interface USB 2.0 plug B (driver: see
Status LEDs
Power, Status, 10 * Ethernet, USB, SFP
Realtime clock
System time persists even at power failure for some hours.
Wall mounting
Integrated in housing
Desktop operation
Possible, rubber pad included the package
Temperature range: Operational 0°C to 40°C; storage -25°C to 70°C; Max. rel. humidity 10 - 95%
(non condensing)
Protection Class
Power supply
Internal power supply 100-240V / 50-60Hz; 0,7 A, with energy efficient switching controler;
complies with EuP directive 2008/28/EC
Power consumption (idling)
Less than 5 Watt
Metal case, opening for Kensington lock, prepared for wall mounting
Ca. 265 mm x 40 mm x 170 mm (W x H x D)
Fanless design therefor high MTBF
Reset button
Restart or reset to factory state possible
Service Button
In späterem Release verfügbar
Standards and certifications
R&TTE directive 1999/5/EG; EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN 61000-3-3; EN
61000-4-4; EN 60950-1; EN 300 328; EN 301 489-17; EN 301 489-1; EN 301 893
Content of Delivery
Installation Poster
Guide for the Installation
19" brackets and screws
Two 19" brackets for the switch panel mounting
Ethernet cable
1 Ethernet cable, 2m
Safety Instructions
Safety Instructions
Power cable
Netzstecker 100-240V / 12 V DC, 1.5 A, with high efficient switching controler
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 5 / 9
Software Update
Free-of-charge software updates for system software (BOSS) and management software (DIME
2 year manufacturer warranty inclusive advanced replacement
Number of VPN tunnels
Inclusive 5 active VPN tunnels with the protocols IPSec, PPTP, L2TP and GRE v.0 (also in
combination possible)
Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong
encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)
GRE v.0
Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation
Layer 2 tunnelling protocol inclusive PPP user authentication
Internet Protocol Security establishing of VPN connections
IPSec Algorithms
DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish
(256 Bit); MD-5, SHA-1, RipeMD160, Tiger192 Hashes
IPSec hardware acceleration
Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES
IPSec key exchange via preshared keys or certificates
IPSec IKE Config Mode
IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the
company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.
IPSec IKE XAUTH (Client/Server)
Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and
XAUTH server for loging of XAUTH clients
IPSec IKE XAUTH (Client/Server)
Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions
Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT
IPSec IPComp
IPSec IPComp data compression for higher data throughput via LZS
IPSec certificates (PKI)
Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server; upload
of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via FCI
Certificates management via SCEP (Simple Certificate Enrollment Protocol)
IPSec Certificate Revocation
Support of remote CRLs on a server via LDAP or local CRLs
Lists (CRL)
IPSec Dead Peer Detection
Continuous control of IPSec connection
IPSec dynamic IP via ISDN
Transmission of dynamic IP address in ISDN D or B channel; free-of-charge licence necessary
IPSec dynamic DNS
Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a IPSec
Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which were
configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).
IPSec Multi User
Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry
The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 6 / 9
By activating of NAT on an IPSec connection it is possible, to implement several remote locations
with identical local IP addess networks in different IP nets for the VPN connection
Number of IPSec tunnels
Inclusive 5 active IPSec tunnels
Symmetric Network and Port Address Translation (NAT/PAT) with randomly generated ports
inclusive Multi NAT (1:1 translation of whole networks)
Policy based NAT/PAT
Network and Port Address Translation via different criteria like IP protocols, source/destination IP
Address, source/destination port
Policy based NAT/PAT
For incoming and outgoing connections and for each interface variable configurable
Content Filtering
Optional ISS/Cobion Content filter (30 day test license inclusive)
Stateful Inspection Firewall
Packet filtering depending on the direction with controling and interpretation of each single
connection status
Packet Filter
Filtering of IP packets according to different criteria like IP protocols, source/destination IP address,
source/destination port, TOS/DSCP, layer 2 priority for each interface variable configurable
Logging / Monitoring / Reporting
Internal system logging
Syslog storage in RAM, display via web-based configuration user interface (http/https), filter for
subsystem, level, message
External system logging
Syslog, several syslog server with different syslog level configurable
E-Mail alert
Automatic E-Mail alert by definable events
SNMP traps
SNMP traps (v1, v2, v3) configurable
IPSec monitoring
Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface
Interfaces monitoring
Statistic information of all pysical and logical interfaces (ETH0, ETH1, SSIDx, ...), output via
web-based configuration user interface (http/https)
IP accounting
Detailed IP accounting, source, destination, port, interface and packet/bytes counter, transmission
also via syslog protocol to syslog server
RADIUS accounting
RADIUS accounting for PPP, PPTP, PPPoE and ISDN dialup connections
Keep Alive Monitoring
Control of hosts/connections via ICMP polling
Traces can be stored in PCAP format, so that import to different open source trace tools (e.g.
wireshark) is possible.
Detailed traces can be done for different protocols e.g. ISDN, PPPoE, ... generation local on the
device and remote via DIME Manager
Administration / Management
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 7 / 9
Administration / Management
Central check of access authorization at one or several RADIUS server, RADIUS (PPP, IPSec
inclusive X-Auth and login authentication)
RADIUS dialout
On a RADIUS server configured PPP und IPSec connection can be loaded into the gateway (RADIUS
Support of TACACS+ server for login authentication and for shell comando authorization
Time synchronization
The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server
configurable). The obtained time can also be transmitted per SNTP to SNTP clients.
Automatic Time Settings
Time zone profiles are configurable. That enables an automatic change from summer to winter
Supported management
DIME Manager, XAdmin
Configurable scheduler
Configuring of time and event controlled tasks, e.g. reboot device, activate/deactivate interface,
activate/deactivate WLAN, trigger SW update and configuration backup
Configuration Interface (FCI)
Integrated web server for web-based configuration via HTTP or HTTPS (supporting self created
certificates). This user interface is by most of bintec elmeg GmbH products identical.
Software update
Software updates are free of charge; update via local files, HTTP, TFTP or via direct access to the
bintec elmeg web server
Remote maintenance
Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS and SNMP (V1,V2,V3)
GSM remote maintenance
Remote maintenance via GSM login (external USB UMTS (3G) modem required)
Device discovery function
Device discovery via SNMP multicast.
On The Fly configuration
No reboot after reconfiguration required
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access
list configurable
SNMP configuration
Complete management with MIB-II, MIB 802.11, Enterprise MIB
Configuration export and import
Load and save configurations, optional encrypted; optional automatic control via scheduler
SSH login
Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications
HP OpenView
Integration into Network Node Manager
Support of XAdmin roll out and configuration managemant tool for larger router installations
Configuration via USB
Configuration interface is available
Software Licenses
BRRP-RS123x/RS35x-Series (5500001630)
Software License for bintec Router Redundancy Protocol (BRRP) for RS123x and
Cobion Content Filter Small (80551)
Cobion content filter for RSxxx, Rxx02, RTxx02 series; R230a(w), R232b(w), TR200,
R1200(w/wu), R3000(w), R3400, R3800, R232aw, RV-Series; list price for one year
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 8 / 9
Pick-up Service / Warranty Extension
Service Package 'small' (5500000810)
Warranty extension of 3 years to a total of 5 years, including advanced
replacement for bintec elmeg products of the category 'small'. Please find a
detailed description as well as an overview of the categories on
Product Services
HotSpotHosting 2yr 1 location (5500000861)
HotSpot solution hosting fee for 2 year and 1 location
HotSpotHosting 1yr 1 location (5510000198)
HotSpot solution hosting fee for 1 year and 1 location
Additional HotSpot location (5510000199)
Additional location for the HotSpot solution (551000198, 5500000861) valid for one
bintec 4GE-LE (5530000119)
LTE (4G)/UMTS (3G) extension device for router; 1x Gbit Eth; Simcard slot;
Wallmounting; PoE Injector inclusive
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] -
bintec RS123
Subject to technical alterations
Page 9 / 9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF