HDMI Switch 3x1 4K2K Support PIP

HDMI Switch 3x1 4K2K Support PIP
HDMI Switch 3x1 4K2K Support PIP
User manual
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
This range of high performance HDMI switch provide four HDMI in to one
HDMI output and supports
PIP, 4K×2K, 3D, Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI
standards you can be sure of great HDMI SWITCH.
1. 3 HDMI input signal switch to 1 HDMI sink device.
2. HDCP 1.4 protocol compliant.
3. 3D HDMI 1.4a video format support.
4. Support PIP (Picture in picture), contain 1 main picture and 3 sub-pictures.
5. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
6. Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
7. Support deep color 30bit, 36bit, 48bit per pixel.
8. Digital audio format, as DTS-HD/Dolby-true-HD/LPCM 7.1/DTS/Dolby-AC3/DSD.
1. HDMI Switch
2. 5V1A DC Power Supply adapter
3. Remote Controller
4. Operation Manual
Frequency Bandwidth
HDMI Switch Input Ports
3×HDMI Female input port
HDMI Switch Output Ports
1×HDMI Female output ports
Power Supply
DC 5V 1A
ESD Protection
Human Body Model:± 8kV (air-gap discharge)
Dimensions (L×W×H)
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20 ~ 90% RH (Non-condensing)
Power Consumption
± 4kV (contact discharge)
Operation controls and Functions
Front Panel
1. POWER: This red LED illuminates when the device is connected with power supply .
2. SWITCH: Press this button to select the input source.
3. IR: Remote control signal receive.
4. OUTPUT LED: this green LED illuminate when TV plug in over HDMI cable.
INPUT LED: These bi-color LED describe corresponding status. That green illuminate indicates that
the signal has plus in and has been selected, that red illuminate indicates that the signal has plus in bus
has not been selected, LED get dark indicates that the signal has not plus in.
Rear Panel
Left Panel
DC 5V: Plug the 5V DC power supply into the
unit and connect the adapter to AC wall outlet.
Remote control
1. Select input signal to be showed on the TV.
2. No function in this HDMI 3×1 Switch.
3. PIP operation area:
PIP: Open/close the PIP function.
SEL: Select a sub-picture to be main picture.
Enter: Enter the sub-picture which has been selected to be main picture.
4. No function in this HDMI 3×1 Switch.
Application Example
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF