Intelligent Machinery Protection

Intelligent Machinery Protection
The need to protect your critical
plant equipment
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.
Protect your critical rotating plant…
…with the intelligent option - DN26 G3 from Sensonics
Intelligent Machinery Protection
The scalable, compact solution for Vibration, Position and Speed Monitoring.
For over 40 years Sensonics has been at the forefront in developing
smart condition monitoring systems which help industry to monitor
and protect critical rotating plant.
Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly successful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution.
Shaft and Thrust Position
Speed and Tachometer
DN26 G3 from Sensonics…
...the scalable and compact solution
l Steam Turbines
l Axial and Reciprocating Compressors
l Industrial Gas Turbines
l Horizontal and Vertical Pumps
l Hydro Electric Machines
l Turbo Expanders
l Electric motors and Generators
l Fans and Blowers
l Centrifugal Pumps and Compressors
l Centrifuges
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK
produced by www.harveycomms.co.uk
Applications
The need to protect your critical
plant equipment
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.
Protect your critical rotating plant…
…with the intelligent option - DN26 G3 from Sensonics
Intelligent Machinery Protection
The scalable, compact solution for Vibration, Position and Speed Monitoring.
For over 40 years Sensonics has been at the forefront in developing
smart condition monitoring systems which help industry to monitor
and protect critical rotating plant.
Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly successful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution.
Shaft and Thrust Position
Speed and Tachometer
DN26 G3 from Sensonics…
...the scalable and compact solution
l Steam Turbines
l Axial and Reciprocating Compressors
l Industrial Gas Turbines
l Horizontal and Vertical Pumps
l Hydro Electric Machines
l Turbo Expanders
l Electric motors and Generators
l Fans and Blowers
l Centrifugal Pumps and Compressors
l Centrifuges
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK
produced by www.harveycomms.co.uk
Applications
Protecting your Critical Rotating Plant
DN26 G3 Features and benefits
LCD Display – Intuitive
bar graph and lamp
alarm displays with
measured values
The DN26 G3 Machine Protection Monitor is a high performance fully programmable
signal conditioning unit capable of monitoring 2 Channels of Absolute Vibration,
Shaft Vibration or Shaft Position. An additional third channel is available as standard
for measuring speed or for use as a phase reference.
The sensor interface is programmable to accept IEPE type accelerometers /
velometers, proximity probes (API 670 std), and active / passive speed probes.
All sensor signals are available via a buffered interface for further detailed signal
analysis.
All three measurement channels are available via a 4-20mA interface. Three alarm
relays are available as standard with the option to expand to a maximum of seven.
One alarm relay dedicated to module and sensor integrity, while the remaining
relays are programmable across a range of selectable alarm criteria.
Sensor Inputs - Fully configurable interface to suit most
proximity, accelerometer and
vibration velocity sensors
Alarm Historian - Captures and
time stamps all alarm events
Applications
Small to Medium Industrial Machines
Fans, Pumps, Motors, Centrifuges and Turbines
Shutdown Protection and Condition Monitoring
Ideal for OEM integration
l
l
l
l
Mechanical - DIN Rail mounted
unit with compact size 126mm
x 109mm x 70mm including
connectors
Summary LEDs - Easy viewing of
overall module alarm and health
status
Ethernet Interface - Utilised
for uploading measurement
algorithm code, providing IP
connectivity and remote
access
Relay Expansion - 4 digital
outputs for connection of
a relay expansion raft
The internal web server provides for easy module configuration and IP network
connectivity for remote access to the module facilities and data.
Each DN26 G3 is provided with an intuitive colour LCD display and menu drive
facility to provide immediate viewing and access to the measured values and alarm
status.
Machine Measurement Modes
l Absolute and Relative Vibration
l Shaft Position
l Dedicated Speed & Phase Channel
Buffered Outputs - Dynamic
sensor signals available for
further analysis
Flexible Configuration
l Universal Module for all measurement options
l Field Upgradeable
l Programmable Warning and Danger Alarms
l Programmable Transducer Supply
l Universal Mains and +24Vdc power options
l Ethernet Communications
l Internal web server set up
l Compact size and scalable
Menu Buttons - Access to the
various display modes
Take a closer look at the features and benefits…
Power Supply +24V dc
and Universal AC Mains
Alarm Relays - 3 optional
relays with logic selection and
programmable levels, delay and
hysteresis
Analog Outputs Fully configurable 4-20mA
outputs per channel
Web based configurator –
Access the internal web pages
to set up the module, locally
or remotely
DN26 G3 Measurement Specifications
Bearing Vibration Measurements
Shaft Position and Vibration Measurements
Speed Measurements
Acceleration: 0-100.0g, ±1.0% (1Hz to 3kHz )
Velocity: 0-100mm/s, ±1.0% (1Hz to 3kHz )
Displacement: 0 – 1000um, ±1.0% (5Hz to 1kHz )
Low Pass Filter: Programmable, 100Hz to 3kHz , >24dB / Octave
High Pass Filter: Programmable, 1Hz to 100Hz , >24dB / Octave
Transducer: 2/3 wire, IEPE programmable
Shaft Vibration: 0 – 1000um pk-pk , ±1.0%
Low Pass Filter: Programmable, 100Hz to 3kHz, >24dB / Octave
Shaft Position: ±1.0mm std plus options
Transducer: Eddy Current / Proximity Probe
3.94mV/um and 7.87mV/um
3/4 – wire system, -24V @ 40mA
Frequency Range: 0.02Hz to 20kHz
Accuracy: better than ±0.1% of reading
Resolution: better than ±0.1% of full scale
Sensitivity: 0.1V – 20.0V pk-pk
Transducer Options:
Eddy Current / Proximity
Active / Passive Magnetic
TTL
Protecting your Critical Rotating Plant
DN26 G3 Features and benefits
LCD Display – Intuitive
bar graph and lamp
alarm displays with
measured values
The DN26 G3 Machine Protection Monitor is a high performance fully programmable
signal conditioning unit capable of monitoring 2 Channels of Absolute Vibration,
Shaft Vibration or Shaft Position. An additional third channel is available as standard
for measuring speed or for use as a phase reference.
The sensor interface is programmable to accept IEPE type accelerometers /
velometers, proximity probes (API 670 std), and active / passive speed probes.
All sensor signals are available via a buffered interface for further detailed signal
analysis.
All three measurement channels are available via a 4-20mA interface. Three alarm
relays are available as standard with the option to expand to a maximum of seven.
One alarm relay dedicated to module and sensor integrity, while the remaining
relays are programmable across a range of selectable alarm criteria.
Sensor Inputs - Fully configurable interface to suit most
proximity, accelerometer and
vibration velocity sensors
Alarm Historian - Captures and
time stamps all alarm events
Applications
Small to Medium Industrial Machines
Fans, Pumps, Motors, Centrifuges and Turbines
Shutdown Protection and Condition Monitoring
Ideal for OEM integration
l
l
l
l
Mechanical - DIN Rail mounted
unit with compact size 126mm
x 109mm x 70mm including
connectors
Summary LEDs - Easy viewing of
overall module alarm and health
status
Ethernet Interface - Utilised
for uploading measurement
algorithm code, providing IP
connectivity and remote
access
Relay Expansion - 4 digital
outputs for connection of
a relay expansion raft
The internal web server provides for easy module configuration and IP network
connectivity for remote access to the module facilities and data.
Each DN26 G3 is provided with an intuitive colour LCD display and menu drive
facility to provide immediate viewing and access to the measured values and alarm
status.
Machine Measurement Modes
l Absolute and Relative Vibration
l Shaft Position
l Dedicated Speed & Phase Channel
Buffered Outputs - Dynamic
sensor signals available for
further analysis
Flexible Configuration
l Universal Module for all measurement options
l Field Upgradeable
l Programmable Warning and Danger Alarms
l Programmable Transducer Supply
l Universal Mains and +24Vdc power options
l Ethernet Communications
l Internal web server set up
l Compact size and scalable
Menu Buttons - Access to the
various display modes
Take a closer look at the features and benefits…
Power Supply +24V dc
and Universal AC Mains
Alarm Relays - 3 optional
relays with logic selection and
programmable levels, delay and
hysteresis
Analog Outputs Fully configurable 4-20mA
outputs per channel
Web based configurator –
Access the internal web pages
to set up the module, locally
or remotely
DN26 G3 Measurement Specifications
Bearing Vibration Measurements
Shaft Position and Vibration Measurements
Speed Measurements
Acceleration: 0-100.0g, ±1.0% (1Hz to 3kHz )
Velocity: 0-100mm/s, ±1.0% (1Hz to 3kHz )
Displacement: 0 – 1000um, ±1.0% (5Hz to 1kHz )
Low Pass Filter: Programmable, 100Hz to 3kHz , >24dB / Octave
High Pass Filter: Programmable, 1Hz to 100Hz , >24dB / Octave
Transducer: 2/3 wire, IEPE programmable
Shaft Vibration: 0 – 1000um pk-pk , ±1.0%
Low Pass Filter: Programmable, 100Hz to 3kHz, >24dB / Octave
Shaft Position: ±1.0mm std plus options
Transducer: Eddy Current / Proximity Probe
3.94mV/um and 7.87mV/um
3/4 – wire system, -24V @ 40mA
Frequency Range: 0.02Hz to 20kHz
Accuracy: better than ±0.1% of reading
Resolution: better than ±0.1% of full scale
Sensitivity: 0.1V – 20.0V pk-pk
Transducer Options:
Eddy Current / Proximity
Active / Passive Magnetic
TTL
The need to protect your critical
plant equipment
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.
Protect your critical rotating plant…
…with the intelligent option - DN26 G3 from Sensonics
Intelligent Machinery Protection
The scalable, compact solution for Vibration, Position and Speed Monitoring.
For over 40 years Sensonics has been at the forefront in developing
smart condition monitoring systems which help industry to monitor
and protect critical rotating plant.
Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly successful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution.
Shaft and Thrust Position
Speed and Tachometer
DN26 G3 from Sensonics…
...the scalable and compact solution
l Steam Turbines
l Axial and Reciprocating Compressors
l Industrial Gas Turbines
l Horizontal and Vertical Pumps
l Hydro Electric Machines
l Turbo Expanders
l Electric motors and Generators
l Fans and Blowers
l Centrifugal Pumps and Compressors
l Centrifuges
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK
produced by www.harveycomms.co.uk
Applications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement